메뉴 건너뛰기




Volumn 39, Issue 15, 2006, Pages 3213-3219

Wear, oxidation and mechanical properties of a sequentially irradiated and annealed UHMWPE in total joint replacement

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; CROSSLINKING; JOINT PROSTHESES; OXIDATION RESISTANCE; STRENGTH OF MATERIALS; WEAR OF MATERIALS;

EID: 33746443343     PISSN: 00223727     EISSN: 13616463     Source Type: Journal    
DOI: 10.1088/0022-3727/39/15/S12     Document Type: Article
Times cited : (82)

References (37)
  • 2
    • 0028798063 scopus 로고
    • The problem is osteolysis 1995
    • Harris W 1995 The problem is osteolysis 1995 Clin. Orthop. Rel. Res. 311 46-53
    • (1995) Clin. Orthop. Rel. Res. , vol.311 , pp. 46-53
    • Harris, W.1
  • 3
    • 0032775639 scopus 로고    scopus 로고
    • Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty
    • Kurtz S M, Muratoglu O K, Evans M and Edidin A A 1999 Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty Biomaterials 20 1659-88
    • (1999) Biomaterials , vol.20 , Issue.18 , pp. 1659-1688
    • Kurtz, S.M.1    Muratoglu, O.K.2    Evans, M.3    Edidin, A.A.4
  • 4
    • 73949138074 scopus 로고    scopus 로고
    • Advances in the processing, sterilization, crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty
    • Jahan M S, Wang C, Schwartz G and Davidson J A 1999 Advances in the processing, sterilization, crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty J. Biomed. Mater. Res. 25 1005-17
    • (1999) J. Biomed. Mater. Res. , vol.25 , pp. 1005-1017
    • Jahan, M.S.1    Wang, C.2    Schwartz, G.3    Davidson, J.A.4
  • 7
    • 0029725748 scopus 로고    scopus 로고
    • Mechanistic and morphological origins of ultra-high molecular weigh polyethylene wear debris in total joint replacement prostheses
    • Wang A, Stark C and Dumbleton J H 1996 Mechanistic and morphological origins of ultra-high molecular weigh polyethylene wear debris in total joint replacement prostheses Proc. Inst. Mech. Eng. part H 210 141-55
    • (1996) Proc. Inst. Mech. Eng. , vol.210 , pp. 141-155
    • Wang, A.1    Stark, C.2    Dumbleton, J.H.3
  • 8
    • 0142147210 scopus 로고    scopus 로고
    • Increase in early polyethylene wear after sterilization with ethylene oxide: Radiostereometric analysis of 201 total hips
    • Digas G, Thanner J, Nivbrant B, Rohrl S, Strom H and Karrholm J 2003 Increase in early polyethylene wear after sterilization with ethylene oxide: radiostereometric analysis of 201 total hips Acta Orthop. Scand. 74 531-41
    • (2003) Acta Orthop. Scand. , vol.74 , Issue.5 , pp. 531-541
    • Digas, G.1    Thanner, J.2    Nivbrant, B.3    Rohrl, S.4    Strom, H.5    Karrholm, J.6
  • 9
    • 2442608349 scopus 로고    scopus 로고
    • Sterilization and polyethylene wear: Clinical studies to support laboratory data
    • Sychterz C J, Orishimo K F and Engh C A 2004 Sterilization and polyethylene wear: clinical studies to support laboratory data J. Bone. Joint. Surg. Am. 86 1017-22
    • (2004) J. Bone. Joint. Surg. Am. , vol.86 , pp. 1017-1022
    • Sychterz, C.J.1    Orishimo, K.F.2    Engh, C.A.3
  • 10
    • 0032773847 scopus 로고    scopus 로고
    • Plasticicity-induced damage layer is a precursor to wear in radiation cross-linked UHMWPE acetabular components for total hip replacement
    • Edidin A A, Pruitt L, Jewett C W, Crane D J, Roberts D and Kurtz S M 1999 Plasticicity-induced damage layer is a precursor to wear in radiation cross-linked UHMWPE acetabular components for total hip replacement J. Arthroplasty 14 616-27
    • (1999) J. Arthroplasty , vol.14 , Issue.5 , pp. 616-627
    • Edidin, A.A.1    Pruitt, L.2    Jewett, C.W.3    Crane, D.J.4    Roberts, D.5    Kurtz, S.M.6
  • 11
    • 0032927112 scopus 로고    scopus 로고
    • Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements
    • McKellop H, Shen F W, Lu B, Campbell P and Salovey R 1999 Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements J. Orthop. Res. 17 157-67
    • (1999) J. Orthop. Res. , vol.17 , Issue.2 , pp. 157-167
    • McKellop, H.1    Shen, F.W.2    Lu, B.3    Campbell, P.4    Salovey, R.5
  • 12
    • 23044492290 scopus 로고    scopus 로고
    • Clinical performance of a Durasul highly cross-linked polyethylene acetabular liner for total hip arthroplasty at five years
    • Dorr L D, Wan Z, Shahrdar C, Sirianni L, Boutary M and Yun A 2005 Clinical performance of a Durasul highly cross-linked polyethylene acetabular liner for total hip arthroplasty at five years J. Bone Joint Surg. A 87 1816-21
    • (2005) J. Bone Joint Surg. , vol.87 , Issue.8 , pp. 1816-1821
    • Dorr, L.D.1    Wan, Z.2    Shahrdar, C.3    Sirianni, L.4    Boutary, M.5    Yun, A.6
  • 14
    • 26444468492 scopus 로고    scopus 로고
    • Early femoral head penetration of a highly cross-linked polyethylene liner versus a conventional polyethylene liner
    • Krushell R J, Fingeroth R J and Cushing M C 2005 Early femoral head penetration of a highly cross-linked polyethylene liner versus a conventional polyethylene liner J. Arthroplasty Suppl 20 373-6
    • (2005) J. Arthroplasty , vol.20 , pp. 73-376
    • Krushell, R.J.1    Fingeroth, R.J.2    Cushing, M.C.3
  • 15
    • 26844448524 scopus 로고    scopus 로고
    • In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty
    • Manning D W, Chiang P P, Martell J M, Galante J O and Harris W H 2005 In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty J. Arthroplasty 20 880-6
    • (2005) J. Arthroplasty , vol.20 , Issue.7 , pp. 880-886
    • Manning, D.W.1    Chiang, P.P.2    Martell, J.M.3    Galante, J.O.4    Harris, W.H.5
  • 17
    • 27644448756 scopus 로고    scopus 로고
    • Effect of cross-linking on the microstructure and mechanical properties of ultra-high molecular weight polyethylene
    • Ries M D and Pruitt L 2005 Effect of cross-linking on the microstructure and mechanical properties of ultra-high molecular weight polyethylene Clin. Orthop. Rel. Res. 440 149-56
    • (2005) Clin. Orthop. Rel. Res. , vol.440 , pp. 149-156
    • Ries, M.D.1    Pruitt, L.2
  • 18
    • 2342495274 scopus 로고    scopus 로고
    • Alphatopherol-doped irradiated UHMWPE for high fatigue resistance and low wear
    • Oral E, Wannomae K K, Hawkins N, Harris W H and Muratoglu O K 2004 Alphatopherol-doped irradiated UHMWPE for high fatigue resistance and low wear Biomaterials 25 5512-22
    • (2004) Biomaterials , vol.25 , Issue.24 , pp. 5515-5522
    • Oral, E.1    Wannomae, K.K.2    Hawkins, N.3    Harris, W.H.4    Muratoglu, O.K.5
  • 21
    • 0036715195 scopus 로고    scopus 로고
    • Surface damage in machined ram-extruded and net-shape molded retrieved polyethylene tibial inserts of total knee replacements
    • Berzins A, Jacobs J, Berger R, Ed C, Natarajan R N, Andriacchi T P and Galante J O 2002 Surface damage in machined ram-extruded and net-shape molded retrieved polyethylene tibial inserts of total knee replacements J. Bone Joint Surg. A 84 1534-40
    • (2002) J. Bone Joint Surg. , vol.84 , pp. 1534-1540
    • Berzins, A.1    Jacobs, J.2    Berger, R.3    Ed, C.4    Natarajan, R.N.5    Andriacchi, T.P.6    Galante, J.O.7
  • 22
    • 0031544587 scopus 로고    scopus 로고
    • Wear in retrieved condylar knee arthroplasties. A comparison of wear in different designs of 280 retrieved condylar knee prostheses
    • Blunn G W, Joshi A B, Minns R J, Lidgren L, Lilley P, Ryd L, Engelbrecht E and Walker P S 1997 Wear in retrieved condylar knee arthroplasties. A comparison of wear in different designs of 280 retrieved condylar knee prostheses. J. Arthroplasty 12 281-90
    • (1997) J. Arthroplasty , vol.12 , Issue.3 , pp. 281-290
    • Blunn, G.W.1    Joshi, A.B.2    Minns, R.J.3    Lidgren, L.4    Lilley, P.5    Ryd, L.6    Engelbrecht, E.7    Walker, P.S.8
  • 23
    • 0032972217 scopus 로고    scopus 로고
    • Relationship between wear debris particles and polyethylene surface damage in primary total knee arthroplasty
    • Hirakawa K, Bauer T W, Yamaguchi M, Stulberg B N and Wilde W H 1999 Relationship between wear debris particles and polyethylene surface damage in primary total knee arthroplasty J. Arthroplasty 14 165-71
    • (1999) J. Arthroplasty , vol.14 , Issue.2 , pp. 165-171
    • Hirakawa, K.1    Bauer, T.W.2    Yamaguchi, M.3    Stulberg, B.N.4    Wilde, W.H.5
  • 24
    • 0026328950 scopus 로고
    • The arthroscopic evaluation and characteristics of severe polyethylene wear in total knee arthroplasty
    • Mintz L, Tsao A K, McCrae C R, Stulberg S D and Wright T 1991 The arthroscopic evaluation and characteristics of severe polyethylene wear in total knee arthroplasty Clin. Orthop. Rel. Res. 273 215-22
    • (1991) Clin. Orthop. Rel. Res. , vol.273 , pp. 215-222
    • Mintz, L.1    Tsao, A.K.2    McCrae, C.R.3    Stulberg, S.D.4    Wright, T.5
  • 25
    • 0023007566 scopus 로고
    • The effect of conformity, thickness and material on stresses in Ultra-High Molecular Weight Polyethylene components for total joint replacement
    • Bartel D, Bicknell V and Wright T 1986 The effect of conformity, thickness and material on stresses in Ultra-High Molecular Weight Polyethylene components for total joint replacement J. Bone Joint Surg. A 68 1041-51
    • (1986) J. Bone Joint Surg. , vol.68 , pp. 1041-1051
    • Bartel, D.1    Bicknell, V.2    Wright, T.3
  • 26
    • 0036743025 scopus 로고    scopus 로고
    • Ultra high molecular weight polyethylene in total knee replacement: Fabrication sterilization and wear
    • Blunn G, Brach del Preva E, Costa L, Fisher J and Freeman M 2002 Ultra high molecular weight polyethylene in total knee replacement: fabrication sterilization and wear J. Bone Joint Surg. B 84 946-47
    • (2002) J. Bone Joint Surg. , vol.84 , Issue.7 , pp. 946-947
    • Blunn, G.1    Brach Del Preva, E.2    Costa, L.3    Fisher, J.4    Freeman, M.5
  • 27
    • 0031239130 scopus 로고    scopus 로고
    • Shapes and dimensional characteristics of polyethylene wear particles generated in vivo by total knee replacements compared to total hip replacements
    • Schmalzried T, Campbell P, Schmitt A, Brown I and Amstutz H 1997 Shapes and dimensional characteristics of polyethylene wear particles generated in vivo by total knee replacements compared to total hip replacements J. Biomed. Mater. Res. 38 203-10
    • (1997) J. Biomed. Mater. Res. , vol.38 , Issue.3 , pp. 203-210
    • Schmalzried, T.1    Campbell, P.2    Schmitt, A.3    Brown, I.4    Amstutz, H.5
  • 29
    • 0346725975 scopus 로고    scopus 로고
    • The effects of lubricant composition on in vitro wear testing of polymeric acetabular components
    • Wang A, Essner A and Schmidig G 2004 The effects of lubricant composition on in vitro wear testing of polymeric acetabular components J. Biomed. Mater. Res. B 68 45-52
    • (2004) J. Biomed. Mater. Res. , vol.68 , Issue.1 , pp. 45-52
    • Wang, A.1    Essner, A.2    Schmidig, G.3
  • 30
    • 0141924490 scopus 로고    scopus 로고
    • Degradation of mechanical properties of UHMWPE acetabular liners following long-term implantation
    • Kurtz S M, Hozack W, Marcolongo M, Turner J, Rimnac C and Edidin A 2003 Degradation of mechanical properties of UHMWPE acetabular liners following long-term implantation J. Arthroplasty suppl 18 68-78
    • (2003) J. Arthroplasty , vol.18 , pp. 68-78
    • Kurtz, S.M.1    Hozack, W.2    Marcolongo, M.3    Turner, J.4    Rimnac, C.5    Edidin, A.6
  • 32
    • 26944432688 scopus 로고    scopus 로고
    • Mechanisms of decrease in fatigue crack propagation resistance in irradiated and melted UHMWPE
    • Oral E, Malhi A S and Muratoglu O K 2006 Mechanisms of decrease in fatigue crack propagation resistance in irradiated and melted UHMWPE Biomaterials 27 917-25
    • (2006) Biomaterials , vol.27 , Issue.6 , pp. 917-925
    • Oral, E.1    Malhi, A.S.2    Muratoglu, O.K.3
  • 35
    • 0038377243 scopus 로고    scopus 로고
    • Comparison of the properties of annealed crosslinked (Crossfire and conventional polyethylene as hip bearing materials
    • Kurtz S, Manley M, Wang A, Taylor S J and Dumbleton J H 2003 Comparison of the properties of annealed crosslinked (Crossfire and conventional polyethylene as hip bearing materials Bulletin-Hospital for Joint Diseases 61 17-26
    • (2003) Bulletin-Hospital for Joint Diseases , vol.61 , pp. 17-26
    • Kurtz, S.1    Manley, M.2    Wang, A.3    Taylor, S.J.4    Dumbleton, J.H.5


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.