Polymerization conditions influence on the thermomechanical and dielectric properties of unsaturated polyester-styrene-copolymers

Microelectronic Engineering

Volumn 87, Issue 1, 2010, Pages 15-19

  Hanemann, T ^a,b   Schumacher, B ^a,b   Hausselt J ^a,b  

^a KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

^b UNIVERSITY OF FREIBURG   (Germany)

Author keywords

Dielectric properties; Embedded capacitors; Unsaturated polyester resin

Indexed keywords

AMBIENT CONDITIONS; AVERAGE MOLECULAR; AVERAGE VALUES; CURING AGENTS; EMBEDDED CAPACITORS; FILM FORMATIONS; GLASS TRANSITION TEMPERATURE; LOSS FACTOR; POLYMER SYSTEMS; POLYMERIZATION CONDITIONS; RELATIVE DIELECTRIC CONSTANT; TAPE CASTING; THERMO-MECHANICAL; UNSATURATED POLYESTER; UNSATURATED POLYESTER RESIN;

CAPACITANCE; CAPACITORS; CERAMIC CAPACITORS; CURING; GLASS TRANSITION; PERMITTIVITY; POLYMERIZATION; POLYMERS; RESINS; STYRENE; VICKERS HARDNESS;

UNSATURATED POLYMERS;

EID: 70350714134     PISSN: 01679317     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mee.2009.05.014     Document Type: Article

References (33)

1. McGrath J.E., Rasmussen L., Shultz A.R., Shobha H.K., Sankarapandian M., Glass T., Long T.E., and Pasquale A.J. Polymer 47 (2006) 4042-4057
2. Lindsay G.A., Ashley P.R., Davis M.C., Guenthner A.J., Sanghadase M., and Wright M.E. Mater. Sci. Eng. B 132 (2006) 8-11
3. Huebner U., Boucher R., Morgenroth W., Schmidt M., and Eich M. Microelectron. Eng. 83 (2006) 1138-1141
4. Bhattacharya S.K., and Tummala R.R. J. Mater. Electron. 11 (2000) 253-268
5. Kakimoto M., Takahashi A., Tsurumi T., Hao J., Li L., Kikuchi R., Miwa T., Oono T., and Yamada S. Mater. Sci. Eng. B 132 (2006) 74-78
6. Das R.N., Lauffer J.M., and Markovich V.R. J. Mater. Chem. 18 (2008) 537-544
7. Bhattacharya S.K., and Tummala R.R. Microelectron. J. 32 (2001) 11-19
8. Li L., Takahashi A., Hayakawa J.H., Tsurumi T.-A., and Kakimoto M.-A. IEEE Trans. Compon. Packaging Technol. 28 4 (2005) 754-759
9. Rao Y., Ogitani S., Kohl P., and Wong C.P. J. Appl. Polym. Sci. 83 (2002) 1084-1090
10. Choi S.-H., Kim I.-D., Hong J.-M., Park K.-H., and Oh S.-G. Mater. Lett. 61 (2007) 2478-2481
11. Ramajo L., Castro M.S., and Reboredo M.M. Composites: Part A 38 (2007) 1852-1859
12. Dang Z.-M., Yu Y.F., Xu H.-P., and Bai J. Compos. Sci. Technol. 68 (2008) 171-177
13. Lee B.I., Wang X., Kwon S.J., Maie H., Kota R., Wang J.H., Park J.G., and Hu M. Microelectron. Eng. 83 (2006) 463-470
14. Popielarz R., and Chiang C.K. Mater. Sci. Eng. B 139 (2007) 48-54
15. Yang T.-I., and Kofinas P. Polymer 48 (2007) 791-798
16. Xu J., and Wong C.P. Composites: Part A 38 (2007) 13-19
17. Butkewitch S., and Scheinbeim J. Appl. Surf. Sci. 252 (2006) 8277-8286
18. Devaraju N.G., Kim E.S., and Lee B.I. Microelectron. Eng. 82 (2005) 71-83
19. Hanemann T., Honnef K., and Haußelt J. Int. J. Adv. Manufact. Technol. 33 (2007) 167-175
20. Hanemann T., Heldele R., Honnef K., Rath S., Schumacher B., and Haußelt J. Cfi/Ber DKG 84 13 (2007) 49-54
21. Hanemann T., Böhm J., Honnef K., Ritzhaupt-Kleissl E., and Haußelt J. Macromol. Mater. Eng. 292 (2007) 285-294
22. Hanemann T. Ceram. Int. 34 (2008) 2099-2105
23. Hanemann T., and Honnef K. Ceram. Int. 35 (2009) 269-275
24. Hanemann T., and Honnef K. Polym. Compos. (2009) 10.1002/pc.20673
25. German R.G. Powder Injection Molding (1990), Metal Powder Industries Federation, Princeton
26. Macosko C.W. Rheology: Principles, Measurements, and Application (1994), Wiley-VCH, New York, USA pp. 100-102
27. Hanemann T. Composites: Part A 37 (2006) 2155-2163
28. Product description and MSDS Unsaturated polyester resin type C647-1, Carl-Roth-GmbH, filed 15.05.2008. , (accessed 23.03.09).
29. Cao X., and Lee L.J. Polymer 44 (2003) 1893-1902
30. Kokkinis A., Valamontes E.S., Goustouridis D., Ganetsos T., Beltsios B., and Raptis I. Microelectron. Eng. 85 (2008) 93-99
31. Elias H.G. Polymere von Monomeren und Makromolekülen zu Werkstoffen (1996), Hüthig und Wepf, Heidelberg p. 314
32. Andrews R.J., and Grulke E.A. Glass transition temperatures of polymers. In: Brandrup J., Immergut E.H., and Grulke E.A. (Eds). Polymer Handbook. fourth ed. (1999), John Wiley & Sons Inc., New York VI-196
33. Sanchez E.M.S., Zavaglia C.A.C., and Felisberti M.I. Polymer 41 (2000) 765-769