High cycle fatigue behaviour of copper deformed by high pressure torsion

International Journal of Fatigue

Volumn 32, Issue 2, 2010, Pages 269-278

  Khatibi, G ^a   Horky, J ^a   Weiss, B ^a   Zehetbauer, M J ^a  

^a UNIVERSITY OF VIENNA   (Austria)

Author keywords

High pressure torsion; Severe plastic deformation; Ultrafine grained copper; Very high cycle fatigue

Indexed keywords

COMMERCIAL PURITY; CYCLIC LOADINGS; EXCELLENT PERFORMANCE; EXPERIMENTAL SETUP; FATIGUE BEHAVIOUR; FATIGUE LIFE; FATIGUE LIFE CURVE; FATIGUE RESISTANCE; FATIGUE STRENGTH; FINE MICROSTRUCTURE; GRAIN COARSENING; HIGH CYCLE FATIGUE; HIGH PRESSURE TORSION; HIGH PRESSURE TORSIONS; HIGH PURITY; LOADING CYCLES; MICROSTRUCTURAL EXAMINATION; PROCESS PARAMETERS; RECRYSTALLIZATIONS; S-N CURVE; SEVERE PLASTIC DEFORMATION; ULTRAFINE GRAINED COPPER; ULTRASONIC RESONANCES; VERY HIGH CYCLE FATIGUE;

COARSENING; COPPER; DEFORMATION; EQUAL CHANNEL ANGULAR PRESSING; FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; PRESSING (FORMING); SYSTEM STABILITY; TENSILE STRENGTH; TORSIONAL STRESS;

FATIGUE TESTING;

EID: 70350564819     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2009.06.017     Document Type: Article

References (43)

1. Valiev R.Z., Islamgaliev R.K., and Alexandrov I.V. Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci 45 (2000) 103-189
2. Valiev R.Z., Estrin Y., Horita Z., Langdon T.G., Zehetbauer M.J., and Zhu Y.T. Producing bulk ultrafine-grained materials by severe plastic deformation. J Met 58 (2006) 33-39
3. In: Zehetbauer M.J., and Zhu Y.Th. (Eds). Bulk nanostructured materials (2008), J. Wiley VCH Weinheim, Germany
4. Zehetbauer M.J., Stüwe H.P., Vorhauer A., Schafler E., and Kohout J. The role of hydrostatic pressure in severe plastic deformation. Adv Eng Mater 5 (2003) 330-337
5. Vorhauer A., and Pippan R. On the homogeneity of deformation by high pressure torsion. Scripta Mater 51 (2004) 921-925
6. Estrin Y., Molotnikov A., Davies C.H.J., and Lapovok R. Strain gradient plasticity modelling of high-pressure torsion. J Mech Phys Solids 56 (2008) 1186-1202
7. Schafler E., and Kerber M.B. Microstructural investigation of the annealing behaviour of high-pressure torsion (HPT) deformed copper. Mater Sci Eng A 462 (2007) 139-143
8. Horita Z., and Langdon T.G. Microstructures and microhardness of an aluminium alloy and pure copper after processing by high-pressure torsion. Mater Sci Eng A 410-411 (2005) 422-425
9. Jiang H., Zhu Y.T., Butt D.P., Alexandrov I.V., and Lowe T.C. Microstructural evolution microhardness and thermal stability of HPT-processed Cu. Mater Sci Eng A 290 (2000) 128-138
10. Dubravina A., Zehetbauer M.J., Schafler E., and Alexandrov I.V. Correlation between domain size obtained by X-ray Bragg profile analysis and macroscopic flow stress in severely plastically deformed copper. Mater Sci Eng A 387-389 (2004) 817-821
11. Lugo N., Llorca N., Cabrera J.M., and Horita Z. Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion. Mater Sci Eng A 477 (2008) 366-371
12. Edalati K., Fujioka T., and Horita Z. Microstructure and mechanical properties of pure Cu processed by high-pressure torsion. Mater Sci Eng A 497 (2008) 168-173
13. Höppel H.W., Kautz M., Xu C., Murashkin M., Langdon T.G., Valiev R.Z., et al. An overview: fatigue behaviour of ultrafine-grained metals and alloys. Int J Fatigue 28 (2006) 1001-1010
14. Lukas P., Kunz L., and Svoboda M. Overview of fatigue behaviour of ultrafine-grained copper produced by severe plastic deformation. Mater Sci Forum 567-568 (2008) 9-16
15. Vinogradov A. Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation. J Mater Sci 42 (2007) 1797-1808
16. Vinogradov A., Kaneko Y., Kitagawa K., Hashimoto S., Stolyarov V., and Valiev R. Cyclic response of ultrafine-grained copper at constant plastic strain amplitude. Scripta Mater 36 (1997) 1345-1351
17. Agnew S.R., and Weertman J.R. Cyclic softening of ultrafine grain copper. Mater Sci Eng A 244 (1998) 145-153
18. Ding H.Z., Mughrabi H., and Höppel H.W. A low-cycle fatigue life prediction model of ultrafine-grained metals. Fatigue Fract Eng Mater Struct 25 (2002) 975-984
19. Höppel H.W., Zhou Z.M., Mughrabi H., and Valiev R.Z. Microstructural study of the parameters governing coarsening and cyclic softening in fatigued ultrafine-grained copper. Philos Mag A 82 (2002) 1781-1794
20. Mughrabi H., Höppel H.W., and Kautz M. Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation. Scripta Mater 51 (2004) 807-812
21. Maier H.J., Gabor P., Gupta N., Karaman I., and Haouaoui M. Cyclic stress-strain response of ultrafine grained copper. Int J Fatigue 28 (2006) 243-250
22. Kunz L., Lukas P., and Svoboda M. Fatigue strength, microstructural stability and strain localization in ultrafine-grained copper. Mater Sci Eng A 424 (2006) 97-104
23. Mughrabi H., and Höppel H.W. Cyclic deformation and fatigue properties of ultrafine grain size materials: current status and some criteria for improvement of the fatigue resistance. In: Farkas D., Kung H., Mayo M.v., Swygenhoven H., and Weertman J. (Eds). Structure and mechanical properties of nanophase materials - theory and computer simulation vs. experiment vol. 634 (2001), MRS, Warrendale B2.1.1-B21.1.2
24. Wu S.D., Wang Z.G., Jiang C.B., Li G.Y., Alexandrov I.V., and Valiev R.Z. The formation of PSB-like shear bands in cyclically deformed ultrafine grained copper processed by ECAP. Scripta Mater 48 (2003) 1605-1609
25. Zhu, Yuntian, Langdon T., and Terence G. The fundamentals of nanostructured materials processed by severe plastic deformation. J Met 56 10 (2004) 58-63
26. Vinogradov A., and Hashimoto S. Multiscale phenomena in fatigue of ultra-fine grain materials - an overview. Mater Trans 42 (2001) 74-84
27. Suresh S. Fatigue of materials (1998), Cambridge University Press, Cambridge
28. Höppel H.W., and Valiev R.Z. On the possibilities to enhance the fatigue performance of ultrafine-grained metals. Zeitschrift für Metallkunde 93 (2002) 641-648
29. Wieczorek A., Zehetbauer M.J., Lewandowska M., Wawer K., and Aifantis E.C. The role of processing and sample geometry for ductility of SPD nanocrystalline metals, BNM2007 (2007), Ufa, Russia
30. Khatibi G., Betzwar-Kotas A., Gröger V., and Weiss B. A study of the mechanical and fatigue properties of metallic microwires. Fatigue Fract Eng Mater Struct 28 8 (2005) 723-733
31. Pilkey W.D. Peterson's stress concentration factors. 2nd ed. (1997), Wiley, New York
32. Agnew S.R., Vinogradov A., Hashimoto S., and Weert man J.R. Overview of fatigue performance of Cu processed by severe plastic deformation. J Electron Mater 28 (1999) 1038
33. Höppel HW, Brunnbauer M, Mughrabi H, Valiev RZ, Zhilyaev AP. Cyclic deformation behaviour of ultrafine grain size copper produced by equal channel angular extrusion proc of materials week 2000. , Munich; 2001.
34. Xu C., Wang Q., Zheng M., Li J., Huang M., Jia Q., et al. Fatigue behavior and damage characteristic of ultra-fine grain low-purity copper processed by equal-channel angular pressing (ECAP). Mater Sci Eng A 475 (2008) 249-256
35. Roth LD, Willertz LE. On the fatigue of copper up to ultrasonic frequencies. In: Wells, Buch, Roth, Tien, editor. Ultrasonic fatigue, Conf. Proc. AIME; 1982 p. 265-82.
36. Lukas P., Kunz L., and Svoboda M. Fatigue notch sensitivity of ultrafine-grained copper. Mater Sci Eng A 391 (2005) 337-341
37. Dao M., Lu L., Asaro R.J., De Hosson J.T.M., and Ma Toward E. A quantitative understanding of mechanical behavior of nanocrystalline metals, overview no. 143. Acta Mater 55 (2007) 4041-4065
38. Cheng S., Stoica A.D., Wang X.-L., Wang G.Y., Choo H., and Liaw P.K. Fracture of Ni with grain-size from nanocrystalline to ultrafine scale under cyclic loading. Scripta Mater 57 (2007) 217-220
39. Wu S.D., Wang Z.G., Jiang C.B., and Li G.Y. Scanning electron microscopy-electron channeling contrast investigation of recrystallization during cyclic deformation of ultrafine grained copper processed by equal channel angular pressing. Philos Mag Lett 82 10 (2002) 559-565
40. Goto M., Han S.Z., Yakushiji T., Lim C.Y., and Kim S.S. Formation process of shear bands and protrusions in ultrafine grained copper under cyclic stresses. Scripta Mater 54 (2006) 2101-2106
41. Kumar K.S., Van Swygenhoven H., and Suresh S. Mechanical behavior of nanocrystalline metals and alloys. Acta Mater 51 (2003) 5743-5774
42. Blum W., and Li Y.J. Influence of grain boundaries on steady-state deformation resistance of ultrafine-grained Cu. Phys Stat Sol (a) 201 13 (2004) 2915-2921
43. Goto M., Han S.Z., Kim S.S., Kawagoishi N., and Lim C.Y. Significance of non-equilibrium grain boundaries in surface damage formation of ultrafine-grained copper in high-cycle fatigue. Scripta Mater 57 (2007) 293-296