Taguchi method and anova: An approach for process parameters optimization of hard machining while machining hardened steel

Journal of Scientific and Industrial Research

Volumn 68, Issue 8, 2009, Pages 686-695

  Gopalsamy, Bala Murugan ^a   Mondal, Biswanath ^a   Ghosh, Sukamal ^b  

^a CSIR CENTRAL MECHANICAL ENGINEERING RESEARCH INSTITUTE   (India)

^b NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

ANOVA; End milling; Hard machining; Regression analysis; Taguchi methods

Indexed keywords

ANOVA; CUTTING SPEED; DEPTH OF CUT; END MILLING; HARD MACHINING; HARDENED STEEL; INFLUENCING PARAMETERS; MACHINING PARAMETERS; MULTIPLE REGRESSION EQUATIONS; PERFORMANCE CHARACTERISTICS; PROCESS PARAMETERS; SURFACE FINISHES; TOOL LIFE; TOOL WEAR;

COMMINUTION; HARDENING; METAL ANALYSIS; MILLING (MACHINING); REGRESSION ANALYSIS; SIGNAL TO NOISE RATIO; STEEL; SURFACE ROUGHNESS; TAGUCHI METHODS;

ANALYSIS OF VARIANCE (ANOVA);

INDUSTRIAL TECHNOLOGY; MILLING; NUMERICAL METHOD; OPTIMIZATION; PERFORMANCE ASSESSMENT; REGRESSION ANALYSIS; STEEL; SURFACE ROUGHNESS; VARIANCE ANALYSIS; WEAR;

EID: 70349656476     PISSN: 00224456     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (32)

1. Ross P J, Taguchi Techniques for Quality Engineering (McGraw Hill, New York) 1995.
2. Park S H, Robust. Design and Analysis for Quality Engineering (Chapman and Hall, London) 1996.
3. Phadke M S, Quality Engineering using Robust Design (Prentice-Hall, Englewood Cliffs, NewJercy) 1989.
4. Taguchi G, Introduction to Quality Engineering (Asian Productivity Organization, Tokyo) 1990.
5. Ghani J A, Choudhury I A and Hassan H H, Application of Taguchi method in the optimization of end milling parameters, J Mater Process Technol, 145 (2004) 84-92.
6. Yang W H and Tarng Y S, Design optimization of cutting parameters for turning operations based on Taguchi method, J Mater Process Technol, 84 (1998) 122-129.
7. (Pubitemid 44817462) Nalbant N, Gökkaya H and Sur G, Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning, Mater Des, 28 (2007) 1379-1385.
8. 3 +TiCN mixed ceramic tool, Mater Des, 28 (2007) 1618-1622.
9. (Pubitemid 44817469) Paulo Davim J and Figueira L, Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools with statistical techniques, Mater Des, 28 (2007) 1186-1191.
10. (Pubitemid 44817468) Basavarajappa S, Chandramohan G and Paulo Davim J, Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites, Mater Des, 28 (2007) 1393-1398.
11. (Pubitemid 44817455) Oktem H, Erzurumlu T and Uzman I, Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin shell part, Mater Des, 28 (2007) 1271-1278:
12. (Pubitemid 35055946) Koshy P, Dewes R C and Aspinwall D K, High speed end milling of hardened tool steel (∼58 HRC), J Mater Process Technol, 127 (2002) 266-273.
13. Dutta A K, Chattopadhyaya A B and Ray K K, Progressive flank wear and machining performance of silver toughened alumina cutting tool inserts, Wear, 261 (2006) 885-895.
14. (Pubitemid 43052673) Arseeularatne J A, Zhang L C, Montross C and Mathew P, On machining of hardened AISI D2 steel with PCBN tools, J Mater Process Technol, 171 (2006) 244-252.
15. Senthil Kumar A, Raja Durai A and Sornakumar T, The effect of tool wear on-tool life of alumina-based ceramic cutting tools while machining hardened martensitic ceramic cutting tools while machining hardened martensitic stainless steel, J Mater Process Technol, 173 (2006) 151-156.
16. (Pubitemid 43208700) Attanasio A, Gelfi M, Giardini C and Remino C, Minimum quantity lubrication in turning: effect on tool wear, Wear, 260 (2006) 333-338.
17. Camuscu N and Asian E, A comparative study on cutting tool performance in end milling of AISI D3 toql steel, J Mater Process Technol, 170 (2005) 121-126.
18. (Pubitemid 41526159) Choudhury I A, See N L and Zukhairi M, Machining with chamfered tools, J Mater Process Technol, 170 (2005) 115-120.
19. Su Y L, Liu T H, Su C T, Yao S H, Kao W H and Cheng K W, Wear of CrC-coated carbide tools in dry machining, J Mater Process Technol, 171 (2006) 108-117.
20. Dewas R C and Aspinwall D K, A review of ultra high speed milling of hardened steels, J Mater Process Technol, 69 (1997) 1-17.
21. El-Wardany T I, Kishawy H A and Elbestawi M A, Surface integrity of die materials in high speed machining, part 1: micro graphical analysis, Trans ASME J Manuf Sci Eng, 122 (2000) 620-631.
22. El-Wardany T I, Kishawy H A and Elbestawi M A, Surface integrity of die materials in high speed machining, part 2: micro hardness variations and residual stresses, Trans ASME J Manuf Sci Eng, 122 (2000) 632-641.
23. Özel T, Modeling of hard part machining: effect of insert edge preparation in CBN cutting tools, J Mater Process Technol, 141 (2003) 284-293.
24. (Pubitemid 35049106) Kato H, Shintani K and Sumiya H, Cutting performance of a binderless sintered cubic boron nitride tool in the high speed milling of grey cast iron, J Mater Process Technol, 127 (2002) 217-221.
25. Urbanski J P, Kosy P, Dewas R C and Aspinwall D K, High speed machining of moulds and dies for net shape manufacture, Mater Des, 21 (2000) 395-402.
26. ISO 8688-2, Tool life testing in milling, part 1 and part 2; end milling (1989).
27. Oxley P L B, The Mechanics of Machining: An Analytical Approach to Assessing Machinability (E. Horwood, Chichester, England) 1989.
28. Shaw M C, The size effect in metal cutting, Sadhana-Academy Proc Eng Sci, 28 (2003) 875-896.
29. Kishawy H A and Elbestawi M A, Effects of edge preparation and cutting speed on surface integrity of die materials in hard machining, Proc Int Mech Eng Congr Exp MED, 8 (1998) 269-276.
30. Kishawy H A and Elbestawi M A, Effects of process parameters on chip formation when machining hardened steel, Proc Int Mech Eng Congr Exp MED, (Dallas, Texas) 6 (1997) 13-20.
31. Oishi K, Built up edge elimination in mirror cutting of hardened steel, Trans ASME J Eng Ind, 117 (1995) 62-66.
32. (Pubitemid 128651851) Nelson S, Schueller J K and Tlusty J, Tool wear in milling hardened die steel, Trans ASME J Manuf Sci Eng, 120 (1998) 669-673.