A comparative study on cutting tool performance in end milling of AISI D3 tool steel

Journal of Materials Processing Technology

Volumn 170, Issue 1-2, 2005, Pages 121-126

  Camuscu N ^a   Aslan, E ^a  

^a KIRIKKALE UNIVERSITY   (Turkey)

Author keywords

Flank wear; High speed end milling; Surface roughness; Tool steels

Indexed keywords

CERMETS; COATED MATERIALS; MILLING (MACHINING); SURFACE ROUGHNESS; TITANIUM COMPOUNDS; TOOL STEEL; WEAR OF MATERIALS;

CUTTING OPERATIONS; FLANK WEAR; HIGH SPEED END MILLING; SURFACE FINISH;

CUTTING TOOLS;

EID: 27444432556     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2005.04.111     Document Type: Article

References (37)

1. R.C. Dewes, and D.K. Aspinwall A review of ultra high speed milling of hardened steels J. Mater. Process. Technol. 69 1997 1 17
2. W. König, A. Berktold, and K.F. Koch Turning versus grinding - a comparison of surface integrity aspects and attainable accuracies Ann. CIRP 42 1 1993 39 43
3. D. Aspinwall Superhard tooling ten years on Metalworking Prod. 128 11 1984 90 98
4. C. Subramanian, and K.N. Strafford Review of multicomponent and multilayer coatings for tribological applications Wear 165 1993 85 95
5. H.W. Frank, and Löffler Systematic approach to improve the performance of PVD coatings for tool applications Surf. Coat. Technol. 68-69 1994 729 740
6. K.N. Strafford, and C. Subramanian Surface engineering: an enabling technology for manufacturing industry J. Mater. Process. Technol. 53 1995 393 403
7. P.C. Jindal, A.T. Santhanam, U. Schleinkofer, and A.F. Shuster Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning Int. J. Ref. Met. Hard Mater. 17 1999 163 170
8. J.P. Urbanski, P. Koshy, R.C. Dewes, and D.K. Aspinwall High speed machining of molds and dies for net shape manufacture Mater. Des. 21 2000 395 402
9. H.G. Prengel, P.C. Jindal, K.H. Wendt, A.T. Santhanam, P.L. Hedge, and R.M. Penich A new class of high performance PVD coatings for carbide cutting tools Surf. Coat. Technol. 139 2001 25 34
10. Makino Machine Tool Company, The Myths of High-Speed Machining, Moldmaking Technology, April/May 1998, pp. 53-56.
11. Y. Yamada, T. Aoki, S. Kitaura, Y. Tanaka, Y. Okazaki, and H. Hasayaki High speed cutting performance of (Al,Ti)N coated carbide endmills for hardened steels Proceedings of the First French and German Conference on High Speed Machining University of Metz, France 1997 486 489
12. P. Koshy, R.C. Dewes, and D.K. Aspinwall High speed end milling of hardened AISI D2 tool steel (∼58 HRC) J. Mater. Process. Technol. 127 2002 266 273
13. H.K. Tönshoff, H.G. Wobker, and C. Cassel Wear characteristics of cermet cutting tools Ann. CIRP 43 1 1994 89 92
14. B. Vicenzi, L. Risso, and R. Calzavarani High performance milling and gear hobbing by means of cermet tools with a tough (Ti,W,Ta)(C,N)-Co, Ni, W composition Int. J. Ref. Met. Hard Mater. 19 2001 11 16
15. W. König, and R. Fritsch Physically vapor deposited coatings on cermets: performance and wear phenomena in interrupted cutting Surf. Coat. Technol. 68-69 1994 747 754
16. D.-Y. Wang, Y.-W. Li, and W.-Y. Ho Deposition of high quality (Ti,Al)N hard coatings by vacuum arc evaporation process Surf. Coat. Technol. 114 1999 109 113
17. J. Kopac, M. Bahor, and M. Sokovic Optimal machining parameters for achieving the desired surface roughness in fine turning of cold pre-formed steel workpieces Int. J. Mach. Tools Manuf. 42 2002 707 716
18. J. Vleugels, and O. Van Der Biest Chemical wear mechanisms of innovative ceramic cutting tools in the machining of steel Wear 225-229 1999 285 294
19. J.G. Baldoni, and S.T. Buljan Ceramics for machining Am. Ceram. Soc. Bull. 67 1988 381 386
20. X.S. Li Ceramic cutting tools: an introduction Key Eng. Mater. 96 1994 1 18
21. 2 ceramic cutting tools in sliding wear tests and in machining processes J. Mater. Process. Technol. 72 1997 249 255
22. S. Lo Casto, E. Lo Valvo, E. Lucchini, S. Maschio, M. Piacentini, and V.F. Ruisi Machining of steel with advanced ceramic cutting tools Key Eng. Mater. 114 1996 105 134
23. A.S. Kumar, A.R. Durai, and T. Sornakumar Machinability of hardened steel using alumina based ceramic cutting tools Int. J. Ref. Met. Hard Mater. 21 2003 109 117
24. C. Xu, X. Ai, and C. Huang Fabrication and performance of an advanced ceramic tool material Wear 249 2001 503 508
25. T. Nakagawa, T. Ikeda, and T. Matsuoka High speed milling of steel and tool life Proceedings of the 8th International Conference on Tool, Die and Mold Industry Barcelona, Spain 1995
26. I. Nieminen, J. Paro, and V. Kauppinen High-speed milling of advanced materials J. Mater. Process. Technol. 56 1996 24 36
27. P. Fallböhmer, C.A. Rodriguez, T. Özel, and T. Altan High-speed machining of cast iron and alloy steels for die and mold manufacturing J. Mater. Process. Technol. 98 2000 104 115
28. H. Coldwell, R. Woods, M. Paul, P. Koshy, R. Dewes, and D. Aspinwall Rapid machining of hardened AISI H13 and D2 moulds, dies and press tools J. Mater. Process. Technol. 135 2003 301 311
29. P. Koshy, R. Dewes, and D. Aspinwall High speed end milling of hardened AISI D2 steel Proceedings of the International Conference on Precision Engineering 2000 Singapore 2000 pp. 461, 476
30. Y.K. Chou, C.J. Evans, and M.M. Barash Experimental investigation on CBN turning of hardened AISI 52100 steel J. Mater. Process. Technol. 124 2002 274 283
31. P.K. Bossom Finish machining of hard ferrous workpieces Ind. Diamond Rev. 50 540 1990 228 232
32. N. Narutaki, and Y. Yamane Tool wear and cutting temperature of CBN tools in machining of hardened steels Ann. CIRP 28 1979 23 28
33. S. Takastu, H. Shimoda, and K. Otani Effect of CBN content on the cutting performance of polycrystalline CBN tools Int. J. Ref. Hard Met. 12 1983 175 178
34. R.M. Hooper, J.II. Shakib, and C.A. Brooks Microstructure and wear of TiC-cubic BN tools Mater. Sci. Eng. 105-106 1988 429 433
35. S.A. Klimenko, Y.A. Mukovoz, V.A. Lyashko, A.N. Vashchenco, and V.V. Ogorodnik On the wear mechanism of cubic boron nitride base cutting tools Wear 157 1992 1 7
36. J.D. Cristopher Selection of cutting tool materials E.D. Whitney Ceramic Cutting Tools 1994 Noyes Publications New Jersey
37. P. Fallböhmer, T. Altan, H.K. Tönshoff, and T. Nakagawa Survey of the die and mold manufacturing industry J. Mater. Process. Technol. 59 1996 158 168