Effects of temperature of in-flight particles on bonding and microstructure in warm-sprayed titanium deposits

Journal of Thermal Spray Technology

Volumn 18, Issue 3, 2009, Pages 392-400

  Kim, KeeHyun ^a   Watanabe, Makoto ^a   Kawakita, Jin ^a   Kuroda, Seiji ^a  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

Author keywords

Bonding; Interfacial boundary; Microstructure; Splat morphology; Titanium; Warm spraying

Indexed keywords

EFFECTS OF TEMPERATURE; FLAME JETS; HEAVILY DEFORMED; HIGH VELOCITY OXY-FUEL SPRAYING; IN-FLIGHT PARTICLES; INTERFACIAL BOUNDARY; NITROGEN FLOW RATES; NITROGEN GAS; PARTICLE TEMPERATURE; POLISHED SUBSTRATES; POWDER PARTICLES; SEM; SPLAT MORPHOLOGY; STEEL SUBSTRATE; TEM; TEM OBSERVATIONS; TITANIUM PARTICLES; WARM SPRAYING;

FLOW RATE; MICROSTRUCTURE; MORPHOLOGY; NITROGEN; PHASE INTERFACES; SCANNING ELECTRON MICROSCOPY; TITANIUM; TITANIUM DEPOSITS; TRANSMISSION ELECTRON MICROSCOPY;

SUBSTRATES;

EID: 69949163734     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-009-9303-8     Document Type: Review

References (28)

1. M. Grujicic, J. R. Saylor, D. E. Beasley, W. S. DeRosset and D. Helfritch, Computational Analysis of the Interfacial Bonding between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process, Appl. Surf. Sci., 2003, 219 (3-4), p 211-227.
2. C. Borchers, F.Gärtner, and T. Stoltenhoff, H. Assadi, H.Kreye, Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings, J. Appl. Phys., 2003, 93(12), p 10064-10070.
3. J. Kawakita, S. Kuroda, T. Fukushima, H. Katanoda, K. Matsuo and H. Fukanuma, Dense Titanium Coatings by Modified HVOF Spraying, Surf. Coat. Tech., 2006, 201(3-4), p 1250-1255.
4. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, V. Fomin, Cold Spray Technology, Elsevier, Amsterdam, 2007.
5. T. Schmidt, F. Gärtner, H. Assadi, H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54(3), p 729-742.
6. T. Marrocco, D.G. McCartney, P.H. Shipway, and A.J. Sturgeon, Production of Titanium Deposits by Cold-Gas Dynamic Spray: Numerical Modeling and Experimental Characterization, J. Therm. Spray Technol., 2006, 15(2), p 263-272.
7. P. Fauchais and G. Montavon, Plasma Spraying: From Plasma Generation to Coating Structure, Advances in Heat Transfer, 2007, 40, p 205-344.
8. A.A. Syed, A. Denoirjean, P. Fauchais, J.C. Labbe, On the Oxidation of Stainless Steel Particles in the Plasma Jet, Surf. Coat. Tech., 2006, 200(14-15), p 4368- 4382.
9. S. Kuroda, J. Kawakita, M. Watanabe, and H. Katanoda, Warm Spraying - A Novel Coating Process based on the High-Velocity Impact of Solid Particles, Sci. Technol. Adv. Mat., 2008, 9(3), p 033002 (17 p).
10. K.H. Kim, M. Watanabe, K. Mitsuishi, J. Kawakita, T. Wu, and S. Kuroda, Microstructure Observation on the Interface between Warm Spray Deposited Titanium Powder and Steel Substrate, International Thermal Spray Conference and Exposition 2008: Thermal Spray Crossing Borders, E. Lugscheider, Ed., June 2-4, ASM International, Maastricht, The Netherlands, 2008, CD-ROM, p 1289-1294.
11. A. Sharma, R. J. Gambino, S. Sampath, Anisotropic Electrical Properties in Thermal Spray Metallic Coatings. Acta Mater, 2006, 54(1), 59-65.
12. K. Balani, A. Agarwal, S. Seal, J. Karthikeyan, Transmission Electron Microscopy of Cold Sprayed 1100 Aluminum Coating, Scripta Mater., 2005, 53(7), p 845-850.
13. M. Grujicic, C.L. Zhao, W.S. DeRosset, D. Helfritch, Adiabatic Shear Instability based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25(8), p 681-688.
14. C.J. Li, W.Y. Li, Y.Y. Wang, Formation of Metastable Phases in Cold-Sprayed Soft Metallic Deposit, Sur. Coat. Tech., 2005, 198(1-3), p 469-473.
15. C. Borchers, F. Gärtner, T. Stoltenhoff, and H. Kreye, Microstructural Bonding Features of Cold Sprayed Face Centered Cubic Metals, J. Appl. Phy., 2003, 93(8), p.4288-4292.
16. Y. Xiong, K. Kang, G. Bae, S. Yoon, and C. Lee, Dynamic Amorphization and Recrystallization of Metals in Kinetic Spray Process, Appl. Phys. Lett., 2008, 92(19), p 194101 (3 p).
17. A.C. Hall, L.N. Brewer, and T.J. Roemer, Preparation of Aluminum Coatings Containing Homogeneous Nanocrystalline Microstructures Using the Cold Spray Process, J. Therm. Spray Technol., 2008, 17(3), p 352-359.
18. T. Chraska, A. H. King, Effect of Different Substrate Conditions upon Interface with Plasma Sprayed Zirconia - a TEM Study, Surf. Coat. Tech., 2002, 157(2-3), p 238-246.
19. K.H. Kim, M. Watanabe, J. Kawakita, S. Kuroda, Grain Refinement in a Single Titanium Powder Particle Impacted at High Velocity, Scripta Mater., 2008, 59(7), p 768-771.
20. L.A. Giannuzzi, F.A. Stevie, A Review of Focused Ion Beam Milling Techniques for TEM Specimen Preparation, Micron, 1999, 30(3), p 197-204.
21. K.H. Kim, M. Watanabe, and S. Kuroda, Thermal Softening Effect on the Deposition Efficiency and Microstructure of Warm Sprayed Metallic Powder, Scripta Mater., 2009, doi: 10.1016/j.scriptamat.2008.12.050.
22. J. Kawakita, H. Katanoda, M. Watanabe, K. Yokoyama, S. Kuroda, Warm Spraying: An Improved Spray Process to Deposit Novel Coatings, Surf. Coat. Tech., 2008, 202 (18), p 4369-4373.
23. M. Qu, Y. Wu, V. Srinivasan, and A. Gouldstone, Observations of Nanoporous Foam Arising from Impact and Rapid Solidification of Molten Ni Droplets, Appl. Phys. Lett., 2007, 90 (25), p 254101 (3 p).
24. C.-J. Li, J.-L. Li, Evaporated-Gas-Induced Splashing Model for Splat Formation During Plasma Spraying, Surf. Coat. Tech., 2004, 184 (1), p 13-23.
25. X. Jiang, Y. Wan, H. Herman, S. Sampath 2001 Role of Condensates and Adsorbates on Substrate Surface on Fragmentation of Impinging Molten Droplets During Thermal Spray, Thin Solid Films 385 (1-2), 132-141.
26. B.D. Kharas, G. Wei, S. Sampath, H. Zhang, Morphology and Microstructure of Thermal Plasma Sprayed Silicon Splats and Coatings, Surf. Coat. Tech., 2006, 201 (3-4), p 1454-1463.
27. M. Fukumoto, T. Yamaguchi, M. Yamada, and T. Yasui, Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials, J. Therm. Spray Technol., 2007, 16(5-6), p 905-912.
28. V.R. Srivatsan, A. Dolatabadi A, Simulation of Particle-Shock Interaction in a High Velocity Oxygen Fuel Process, J. Therm. Spray Technol., 2006, 15(4), p 481-487.