Optimizations of wear resistance and toughness of hydroxyapatite nickel free stainless steel new bio-composites for using in total joint replacement

Materials and Design

Volumn 31, Issue 1, 2010, Pages 234-243

  Younesi, M ^a   Bahrololoom, M E ^a  

^a SHIRAZ UNIVERSITY   (Iran)

Author keywords

Ceramic matrix composite (A); Scanning electron microscopy (G); Wear (E)

Indexed keywords

BIO-COMPOSITES; BONE ASH; CERAMIC MATRIX COMPOSITE (A); CRACK BRIDGING; FRICTION COEFFICIENTS; HEAT TREATING; HYDROXYAPATITE POWDER; MATRIX GRAINS; MECHANICAL TESTS; NICKEL-FREE STAINLESS STEEL; ORTHOPAEDIC APPLICATIONS; SCANNING ELECTRON MICROSCOPY (G); STRENGTH AND TOUGHNESS; STRENGTHENING EFFECT; TOTAL JOINT REPLACEMENT; TOUGHNESS ENHANCEMENT; WEAR (E); WEIGHT PERCENTAGES;

APATITE; BENDING STRENGTH; CERAMIC MATERIALS; CERAMIC MATRIX COMPOSITES; CORROSION RESISTANT ALLOYS; FRICTION; GRAIN REFINEMENT; HARDNESS; HYDROXYAPATITE; JOINT PROSTHESES; MECHANICAL PROPERTIES; NICKEL; NICKEL ALLOYS; POWDER METALS; SCANNING; SCANNING ELECTRON MICROSCOPY; TOUGHNESS; WEAR RESISTANCE;

STAINLESS STEEL;

EID: 69549133390     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.06.037     Document Type: Article

References (46)

1. Martinetti R., Harmand M.F., and Dolcini L. Synthesis and comparison characterisation of hydroxyapatite and carbonated hydroxyapatite. Key Eng Mater 254 (2004) 233-236
2. Chen C.W., Oakes C.S., and Byrappa K. Synthesis, characterization, and dispersion properties of hydroxyapatite prepared by mechanochemical-hydrothermal methods. J Mater Chem 14 (2004) 2425-2432
3. Gross K.A., and Bhadang K.A. Sintered hydroxyfluorapatites. Part III: sintering and resultant mechanical properties of sintered blends of hydroxyapatite and fluorapatite. Biomaterials 25 (2004) 1395-1405
4. Zou J.P., Ruan J.M., and Huang B.Y. Hydroxyapatite-bioglass-titanium biomaterials used as dense bulk in double-layer biomimetic composite. J Mater Sci Technol 20 (2004) 627-630
5. Ren Y., Yang K., and Zhang B. In vitro study of platelet adhesion on medical nickel-free stainless steel surface. Mater Lett 59 (2005) 1785-1789
6. Yamamoto A., Kohyama Y., Kuroda D., and Hanawa T. Cytocompatibility evaluation of Ni-free stainless steel manufactured by nitrogen adsorption treatment. Mater Sci Eng C 24 (2004) 737-743
7. Nakada N., Hirakawa N., Tsuchiyama T., and Takaki S. Grain refinement of nickel-free high nitrogen austenitic stainless steel by reversion of eutectoid structure. Scr Mater 57 (2007) 153-156
8. Uggowitzer P.J., Magdowski R., and Speidel M.O. Nickel free high nitrogen austenitic steels. ISIJ Int 36 (1996) 901-908
9. Denkhaus E., and Salnikow K. Nickel essentiality, toxicity, and carcinogenicity. Crit Rev Oncol/Hematol 42 (2002) 35-56
10. Vahter M., Berglund M., Akesson A., and Liden G. Metals and women's health. Environ Res A 88 (2002) 145-155
11. Alvarez K., Sato K., Hym S.K., and Nakajima H. Fabrication and properties of Lotus-type porous nickel-free stainless steel for biomedical applications. Mater Sci Eng C 28 (2008) 44-50
12. Sumita M., Hanawa T., and Teoh S.H. Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials-review. Mater Sci Eng C 24 (2004) 753-760
13. Zhu S.L., Wang X.M., Xie G.Q., Qin F.X., Yoshimura M., and Inoue A. Formation of Ti-based bulk glassy alloy/hydroxyapatite composite. Scr Mater 58 (2008) 287-290
14. Witte F., Feyerabend F., Maier P., Fischer J., Stormer M., Blawert C., et al. Biodegradable magnesium-hydroxyapatite metal matrix composites. Biomaterials 28 (2007) 2163-2174
15. Hench L.L. Bioceramics: from concept to clinic. J Am Ceram Soc 74 (1991) 1487-1510
16. Wise D.L., Trantolo D.J., Altobelli D.E., Yaszemski M.J., Gresser J.D., and Schwartz E.R. Ency handbook of biomaterials and bioengineering. Part A: materials vol. 2 (1995), Marcel Dekker, New York
17. De With G., and Corbijn A.J. Metal fibre reinforced hydroxy-apatite ceramics. J Mater Sci 24 (1989) 3411-3415
18. Barril S., Mischler S., and Landolt D. Electrochemical effects on the fretting corrosion behaviour of Ti6Al4V in 0.9% sodium chloride solution. Wear 259 (2005) 282-291
19. Wang Q., Ge S., and Zhang D. Nano-mechanical properties and biotribological behaviors of nanosized HA/partially-stabilized zirconia composites. Wear 259 (2005) 952-957
20. Chen R.Z., and Tuan W.H. Toughening alumina with silver and zirconia inclusions. J Eur Ceram Soc 21 (2001) 2887-2893
21. Zhang X., Gubbels G.H.M., Terpstra R.A., and Metselaar R. Toughening of calcium hydroxyapatite with silver particles. J Mater Sci 32 (1997) 235-243
22. Banuprakash G., Katyal V., Murthy V.S.R., and Murty G.S. Mechanical behaviour of borosilicate glass-copper composites. Composites: Part A 28 (1997) 861-867
23. Troczynski T.B., and Nicholson P.S. Fracture mechanics of titanium/bioactive glass-ceramic particulate composites. J Am Ceram Soc 74 (1991) 1803-1806
24. Bahrololoom M.E., Javidi M., Javadpour S., and Ma J. Characterization of natural HA extracted from bovine cortical bone ash. J Ceram Process Res. 10 2 (2009) 129-138
25. Evans A.G., and Marshall D.B. Wear mechanisms in ceramics. In: Rigney D.A. (Ed). Fundamentals of friction and wear of materials (1981), ASM International 439-453
26. Dutta A.K., Chattopadhyaya A.B., and Ray K.K. Progressive flank wear and machining performance of silver toughened alumina cutting tool inserts. Wear 261 (2006) 885-895
27. Lalande J., Scheppokat S., Janssen R., and Claussen N. Toughening of alumina/zirconia ceramic composites with silver particles. J Eur Ceram Soc 22 (2002) 2165-2171
28. Rabinowicz E. Friction and wear of materials (1965), Wiley, New York 168-169
29. 2) composite reinforced with a ductile phase (Nb). Wear 251 (2001) 890-900
30. Oberbach T., Glien W., and Kaddick C. Third-body-wear as a risk factor in joint endoprosthetics. Key Eng Mater 284-286 (2005) 995-998
31. Lee G.Y., Dharan C.K.H., and Ritchie R.O. A physically-based abrasive wear model for composite materials. Wear 252 (2002) 322-331
32. Zhaao S.h., Xin S.b., Wang X.h., and Liang X.p. Effect of testing parameters on wear properties of alumina strengthen 3Y-TZP ceramics. Key Eng Mater 336-338 (2007) 2468-2471
33. Moore M.A., and Douthwaite R.M. Plastic deformation below worn surfaces. Metal Trans A 7 (1976) 1833-1839
34. Wang A., and Rack H.J. Abrasive wear of silicon carbide particulate-and whisker-reinforced 7091 aluminum matrix composites. Wear 146 (1991) 337-348
35. 3-Nb composites. Wear 262 (2007) 1346-1352
36. Yeomans J.A. Ductile particle ceramic matrix composites-scientific curiosities or engineering materials?. J Eur Ceram Soc 28 (2008) 1543-1550
37. Tuan W.H. Toughening alumina with nickel aluminide inclusions. J Eur Ceram Soc 20 (2000) 895-899
38. Trusty P.A., and Yeomans J.A. The toughening of alumina with iron: effects of iron distribution on fracture toughness. J Eur Ceram Soc 17 (1997) 495-504
39. Tuan W.H., and Brook R.J. The toughening of alumina with nickel inclusions. J Eur Ceram Soc 6 (1990) 31-37
40. Krstic V.V., Nicholson P.S., and Hoagland R.G. Toughening of glasses by metallic particles. J Am Ceram Soc 64 9 (1981) 499-504
41. Moore R.H., and Kunz S.C. Ceram. metal particle-toughened borosilicate sealing glass. Eng Sci Proc 8 7-8 (1987) 839-847
42. Chou W.B., and Tuan W.H. Toughening and strengthening of alumina with silver inclusions. J Eur Ceram Soc 15 (1995) 291-295
43. Rogier R., and Pernot F. Hydroxyapatite-316L fibre composites prepared by vibration assisted slip casting. J Mater Sci: Mater Med 2 (1991) 153-156
44. Bartolomea J.F., Doaaz M., Requena J., Moya J.S., and Tomsia A.P. Mullite/molybdenum ceramic-metal composites. Acta Mater 47 (1999) 3891-3899
45. Ruan J.M., Zou J.P., and Zhou Z.C. Hydroxyapatite-316L stainless steel fibre composite biomaterials fabricated by hot pressing. Powder Met 49 (2006) 62-65
46. Sung-Tag Oh., Tohru S., and Koichi N. Fabrication and mechanical properties of 5 vol% copper dispersed alumina nanocomposite. J Eur Ceram Soc 18 (1998) 31-37