Ductile particle ceramic matrix composites-Scientific curiosities or engineering materials?

Journal of the European Ceramic Society

Volumn 28, Issue 7, 2008, Pages 1543-1550

  Yeomans, J A ^a  

^a UNIVERSITY OF SURREY   (United Kingdom)

Author keywords

Composites; Microstructure final; Thermal shock resistance; Toughness and toughening; Wear resistance

Indexed keywords

CERMETS; DUCTILITY; MICROSTRUCTURE; PLASTICITY; STRENGTH OF MATERIALS; TOUGHENING; TOUGHNESS; WEAR RESISTANCE;

MICROSTRUCTURE-FINAL; THERMAL SHOCK RESISTANCE;

CERAMIC MATRIX COMPOSITES;

CERAMIC MATRIX COMPOSITES; CERMETS; DUCTILITY; MICROSTRUCTURE; PLASTICITY; STRENGTH OF MATERIALS; TOUGHENING; TOUGHNESS; WEAR RESISTANCE;

EID: 40649101611     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2007.12.009     Document Type: Article

References (68)

1. Nivas Y., and Fulrath R.M. Limitation of Griffith flaws in glass-matrix composites. J. Am. Ceram. Soc. 53 4 (1970) 188-191
2. 3 with an Mo-dispersed phase. J. Am. Ceram. Soc. 54 6 (1971) 277-281
3. Hing P., and Groves G.W. The microstructure and fracture properties of MgO crystals containing a dispersed phase. J. Mater. Sci. 7 (1972) 422-426
4. Hing P., and Groves G.W. The strength and fracture toughness of polycrystalline magnesium oxide containing metallic particles and fibres. J. Mater. Sci. 7 (1972) 427-434
5. Krstic V.V., Nicholson P.S., and Hoagland R.G. Toughening of glasses by metallic particles. J. Am. Ceram. Soc. 64 9 (1981) 499-504
6. Krstic V.D. On the fracture of brittle-matrix/ductile-particle composites. Philos. Mag. A 48 5 (1983) 695-708
7. Ashby M.F., Blunt F.J., and Bannister M. Flow characteristics of highly constrained metal wires. Acta metall. 37 7 (1989) 1847-1857
8. Hussain S., Barbariol I., Roitti S., and Sbaizero O. Electrical conductivity of an insulator matrix (alumina) and conductor particle (molybdenum) composites. J. Eur. Ceram. Soc. 23 (2003) 315-321
9. Dlouhy I., Reinisch M., Boccaccini A.R., and Knott J.F. Fracture characteristics of borosilicate glasses reinforced by metallic particles. Fatigue Fract. Eng. Mater. Struct. 20 (1997) 1235-1253
10. Banuprakash G., Katyal V., Murthy V.S.R., and Murty G.S. Mechanical behaviour of borosilicate glass-copper composites. Composites Part A-Appl. Sci. Manuf. 28 (1997) 861-867
11. Moore R.H., and Kunz S.C. Metal particle-toughened borosilicate sealing glass. Ceram. Eng. Sci. Proc. 8 7-8 (1987) 839-847
12. Claxton E., Taylor B.A., and Rawlings R.D. Processing and properties of a bioactive glass-ceramic reinforced with ductile silver particles. J. Mater. Sci. 37 17 (2002) 3725-3732
13. Troczynski T.B., and Nicholson P.S. Fracture mechanics of titanium/bioactive glass-ceramic particulate composites. J. Am. Ceram. Soc. 74 8 (1991) 1803-1806
14. Zhang X., Gubbels G.H.M., Terpstra R.A., and Metselaar R. Toughening of calcium hydroxyapatite with silver particles. J. Mater. Sci. 32 (1997) 235-243
15. Bartolomé J.F., Díaz M., Requena J., Moya J.S., and Tomsia A.P. Mullite/molybdenum ceramic-metal composites. Acta mater. 47 (1999) 3891-3899
16. Tuan W.H., and Brook R.J. The toughening of alumina with nickel inclusions. J. Eur. Ceram. Soc. 6 (1990) 31-37
17. Tuan W.H., and Brook R.J. Processing of alumina/nickel composites. J. Eur. Ceram. Soc. 10 (1992) 95-100
18. Breval E., Deng Z., Chiou S., and Pantano C.G. Sol-gel prepared Ni-alumina composite materials. Part 1. Microstructure and mechanical properties. J. Mater. Sci. 27 (1992) 1464-1468
19. Breval E., and Pantano C.G. Sol-gel prepared Ni-alumina composites materials. Part 2. Structure and hot-pressing temperature. J. Mater. Sci. 27 (1992) 5463-5469
20. Sun, X and Yeomans, J A, The toughening of alumina materials by the inclusion of nickel particles, British Ceramic Proceedings, No. 49 Special Ceramics 9, Institute of Ceramics, Stoke-on-Trent, UK, 1992, pp. 297-308.
21. Ekstrom T. Alumina ceramics with particle inclusions. J. Eur. Ceram. Soc. 11 (1993) 487-496
22. 2. Ceram. Int. 21 (1995) 221-225
23. Sun X., and Yeomans J. Optimization of a ductile-particle-toughened ceramic. J. Am. Ceram. Soc. 79 (1996) 2705-2717
24. 3-Ni composite. Mater. Sci. Eng. B31 (1995) 287-291
25. Wang J., Ponton C.B., and Marquis P.M. Silver-toughened alumina ceramics. Br. Ceram. Trans. 92 (1993) 67-74
26. Chou W.B., and Tuan W.H. Toughening and strengthening with silver inclusions. J. Eur. Ceram. Soc. 15 (1995) 291-295
27. 3-Ag composites. Acta Mater. 44 (1996) 813-818
28. Dutta A.K., Narasaiah N., Chattopadhyaya A.B., and Ray K.K. The load dependence of hardness in alumina-silver composites. Ceram. Int. 27 (2001) 407-413
29. Dutta A.K., Chattopadhyaya A.B., and Ray K.K. Progressive flank wear and machining performance of silver toughened alumina cutting tool inserts. Wear 261 (2006) 885-895
30. Sbaizero O., and Pezzotti G. Influence of residual and bridging stresses on the R-curve behavior of Mo- and FeAl-toughened alumina. J. Eur. Ceram. Soc. 20 (2000) 1145-1152
31. Sbaizero O., and Pezzotti G. Influence of molybdenum particles on thermal shock resistance of alumina matrix ceramics. Mater. Sci. Eng. A343 (2003) 273-281
32. 3-Nb composites. Wear 262 (2007) 1346-1352
33. Aldrich D.E., and Edirisinghe M.J. Addition of copper to an alumina matrix. J. Mater. Sci. Lett. 17 (1998) 965-967
34. Wang L., Shi J.-L., Lin M.-T., Chen H.-R., and Yan D.-S. The thermal shock behavior of alumina-copper composite. Mater. Res. Bull. 36 (2001) 925-932
35. Trusty P.A., and Yeomans J.A. The toughening of alumina with iron: effects of iron distribution on fracture toughness. J. Eur. Ceram. Soc. 17 (1997) 495-504
36. Aldridge M., and Yeomans J.A. The thermal shock behaviour of ductile particle toughened alumina composites. J. Eur. Ceram. Soc. 19 (1998) 1769-1775
37. Aldridge M., and Yeomans J.A. Thermal shock behaviour of iron-particle-toughened alumina. J. Am. Ceram. Soc. 84 3 (2001) 603-607
38. Lane S.M., Biner S.B., and Buck O. Room temperature fracture and high temperature creep characteristics of 20 vol% Nb particulate reinforced alumina. Mater. Sci. Eng. A246 (1998) 244-251
39. Ji Y., and Yeomans J.A. Microstructure and mechanical properties of chromium and chromium/nickel particulate reinforced alumina ceramics. J. Mater. Sci. 37 (2002) 5229-5236
40. Sun X., and Yeomans J.A. Influence of particle size distribution on ductile-phase toughening in brittle materials. J. Am. Ceram. Soc. 79 2 (1996) 562-564
41. 2) composites. J. Eur. Ceram. Soc. 14 (1994) 37-43
42. Tuan W.H., and Chen W.R. Mechanical properties of alumina-zirconia-silver composites. J. Am. Ceram. Soc. 78 (1995) 465-469
43. Chen R.Z., and Tuan W.H. Toughening alumina with silver and zirconia inclusions. J. Eur. Ceram. Soc. 21 (2001) 2887-2893
44. Lalande J., Scheppokat S., Janssen R., and Claussen N. Toughening of alumina/zirconia ceramic composites with silver particles. J. Eur. Ceram. Soc. 22 (2002) 2165-2171
45. Niihara K. New design concept of structural ceramics: ceramic nanocomposites. J. Ceram. Soc. Jpn. 99 (1991) 974-982
46. Sekino T., Nakajima T., and Niihara K. Mechanical and magnetic properties of nickel dispersed alumina-based nanocomposites. Mater. Lett. 29 (1996) 165-169
47. Sekino T., Nakajima T., Ueda S., and Niihara K. Reduction and sintering of a nickel-dispersed-alumina composite and its properties. J. Am. Ceram. Soc. 80 5 (1997) 1139-1148
48. 3/Ni nanocomposites. J. Eur. Ceram. Soc. 19 (1999) 463-468
49. 3/Ni composites from coated powders. Mater. Sci. Eng. A293 (2000) 223-228
50. 4. Mater. Sci. Eng. A302 (2001) 83-91
51. 3/Ni nanocomposites by a chemical method. Mater. Res. Bull. 38 (2003) 1591-1600
52. Aharon O., Bar-Ziv S., Gorni D., Cohen-Hyams T., and Kaplan W.D. Residual stresses and magnetic properties of alumina-nickel nanocomposites. Scr. Mater. 50 (2004) 1209-1213
53. Yao X., Huang Z., Chen L., Jiang D., Tan S., Michel D., et al. Alumina-nickel composites densified by spark plasma sintering. Mater. Lett. 59 (2005) 2314-2318
54. 3/Mo nanocomposites. J. Mater. Sci. 29 (1994) 3185-3192
55. 3/Mo composites from boehmite-coated Mo powders. Mater. Res. Bull. 35 (2000) 2387-2396
56. Dίaz L.A., Valdés A.F., Dίaz C., Espino A.M., and Torrecillas R. Alumina/molybdenum nanocomposites obtained in organic media. J. Eur. Ceram. Soc. 23 (2003) 2829-2834
57. 3/metal nanocomposites. Nanostruct. Mater. 6 (1995) 663-666
58. Sekino T., and Niihara K. Fabrication and mechanical properties of fine-tungsten-dispersed alumina-based composites. J. Mater. Sci. 32 (1997) 3943-3949
59. Guichard J.L., Tillement O., and Mocellin A. Preparation and characterization of alumina-iron cermets by hot-pressing nanocomposite powders. J. Mater. Sci. 32 (1997) 4513-4521
60. Laurent C., Peigney A., Quénard O., and Rousset A. Synthesis and mechanical properties of nanometric metal particles-ceramic matrix nanocomposites. Silic. Ind. 63 (1998) 77-84
61. Guichard J.L., Tillement O., and Mocellin A. Alumina-chromium cermets by hot-pressing of nanocomposite powders. J. Eur. Ceram. Soc. 18 (1998) 174-1752
62. 3-5 vol.% Cr nanocomposites. J. Eur. Ceram. Soc. 22 (2002) 1927-1936
63. 3-Cr nanocomposites. J. Eur. Ceram. Soc. 27 (2007) 1273-1279
64. Oh S.-T., Sekino T., and Niihara K. Fabrication and mechanical properties of 5 vol% copper dispersed alumina nanocomposite. J. Eur. Ceram. Soc. 18 (1998) 31-37
65. 3/Cu-nitrate mixtures. Scr. Mater. 44 (2001) 2117-2120
66. Oh S.-T., Sando M., and Niihara K. Preparation and properties of alumina/nickel-cobalt alloy nanocomposites. J. Am. Ceram. Soc. 81 11 (1998) 3013-3015
67. 3 nanocomposites. Scr. Mater. 39 (1998) 1413-1418
68. Kaplan W.D., and Avishai A. Processing and microstructural control of metal-reinforced ceramic matrix nanocomposites. In: Low I.M. (Ed). Ceramic Matrix Composites, Microstructure properties and applications (2006), Woodhead Publishing Ltd., Cambridge, UK 285-308 chapter 11