Recent progress in metallic glasses in Taiwan

Intermetallics

Volumn 17, Issue 12, 2009, Pages 973-987

  Huang, J C ^a   Chu, J P ^b   Jang, J S C ^c  

^a NATIONAL SUN YAT SEN UNIVERSITY   (Taiwan)

^b NATIONAL TAIWAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

^c I SHOU UNIVERSITY   (Taiwan)

Author keywords

B. Glasses, metallic; B. Mechanical properties at ambient temperature; B. Thermodynamic and thermochemical properties; C. Rapid solidification processing

Indexed keywords

B. GLASSES, METALLIC; B. MECHANICAL PROPERTIES AT AMBIENT TEMPERATURE; B. THERMODYNAMIC AND THERMOCHEMICAL PROPERTIES; BULK METALLIC GLASS; BULK METALLIC GLASS COMPOSITES; C. RAPID SOLIDIFICATION PROCESSING; MICROELECTROMECHANICAL SYSTEMS; NANO-IMPRINTING; RECENT PROGRESS; RESEARCH AND DEVELOPMENT; THIN FILM METALLIC GLASS;

CRYSTALLIZATION; GLASS; LIQUID METALS; MECHANICAL PROPERTIES; MICROELECTROMECHANICAL DEVICES; OPTOELECTRONIC DEVICES; RAPID SOLIDIFICATION; TEMPERATURE; THERMODYNAMICS; ZIRCONIUM;

METALLIC GLASS;

EID: 69449104255     PISSN: 09669795     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.intermet.2009.05.004     Document Type: Review

References (100)

1. Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater 48 (2000) 279
2. Wang W.H., Dong C., and Shek C.H. Bulk metallic glasses. Mater Sci Eng R 44 (2004) 45
3. Schroers J., Pham Q., and Desai A. Themoplastic forming of bulk metallic glass - a technology for MEMS and microstructure fabrication. J Microelectromech Syst 16 (2007) 240
4. Chen M.W. Mechanical behavior of metallic glasses: microscopic understanding of strength and ductility. Annu Rev Mater Res 38 (2008) 14.1
5. In: Miller M., and Liaw P.K. (Eds). Bulk metallic glasses, an overview (2008), Springer, NY
6. x bulk amorphous alloys. Mater Chem Phys 89 (2005) 122
7. 2 amorphous alloy during isothermal annealing. Intermetallics 13 (2005) 907
8. Jang J.S.C., Lu S.C., Chang L.J., Hung T.H., Huang J.C., and Tsao C.Y.A. Crystallization and thermal properties of Zr-Al-Cu-Ni based amorphous alloy added with boron and silicon. J Metastab Nanocryst Mater 24-25 (2005) 201
9. 4 alloy using isothermal DSC and TEM observation. J Non-crystal Solids 352 (2006) 71
10. Jang J.S.C., Lu S.C., Chang L.J., Yang T.H., Huang J.C., and Liu C.T. Thermal stability and crystallization of Zr-Al-Cu-Ni based amorphous alloy added with boron and silicon. Intermetallics 14 (2006) 951
11. Hung T.H., Huang J.C., Jang J.S.C., and Lu S.C. Improved thermal stability of amorphous ZrAlCuNi alloys with Si and B. Mater Trans 48 (2007) 239
12. 1 alloy by isothermal DSC and TEM observation. Mater Sci Eng A 449-451 (2007) 511
13. Jang J.S.C., Chang C.F., Huang Y.C., Huang J.C., Chiang W.J., and Liu C.T. Viscous flow and microforming of a Zr-base bulk metallic glass. Intermetallics 17 (2009) 200
14. Lu Z.P., Shen J., Xing D.W., Sun J.F., and Liu C.T. Appl Phys Lett 89 (2006) 071910
15. x (x = 0∼10) alloys. J Alloys Compd 434-435 (2007) 221
16. Hung T.H., Chang Y.C., Wang Y.N., Tang C.W., Chen H.M., Tsai Y.L., et al. Development of Mg based amorphous alloys with higher amounts of rare earth elements. Mater Trans 48 (2007) 1621
17. Jang J.S.C., Tseng C.C., Chang L.J., Chang C.F., Lee W.J., Huang J.C., et al. Glass forming ability and thermal properties of the Mg based amorphous alloys with dual rare earth elements addition. Mater Trans 48 (2007) 1684
18. x (x = 0∼10) amorphous alloys. Mater Sci Forum 539-543 (2007) 2106
19. Cheng Y.T., Hung T.H., Huang J.C., Jang J.S.C., Tsao C.C.Y., and Lee P.Y. Effects of partial replacement of Cu and Y by boron in Mg-Cu-Y amorphous alloys. Intermetallics 14 (2006) 866
20. Cheng Y.T., Hung T.H., Huang J.C., Hsieh P.J., and Jang J.S.C. The thermal stability and crystallization kinetics of Mg-Cu-Y-B alloys. Mater Sci Eng A 449-451 (2007) 501
21. Du X.H., Huang J.C., Hsieh K.C., Jang J.S.C., Liaw P.K., Lai Y.H., et al. Two-glassy-phase bulk metallic glass with remarkable plasticity. Appl Phys Lett 91 (2007) 131901
22. Du X.H., Huang J.C., Hsieh K.C., Jang J.S.C., Liaw P.K., Chen H.M., et al. Mechanical properties of Zr-based two-glassy phase bulk metallic glass. Adv Eng Mater (2009) 10.1002/adem.200800370
23. Du X.H., Huang J.C., Chen H.M., Chou H.S., Lai Y.H., Hsieh K.C., et al. Phase separated microstructure and shear banding behavior in a designed Zr based glass-forming alloy. Intermetallics 17 (2009) 607
24. Zhang T., Inoue A., and Masumoto T. Mater Trans JIM 32 (1991) 1005
25. Du X.H., and Huang J.C. A modified glass formation criterion for various glass forming liquids with higher reliability. Chin Phys Lett 24 (2007) 1335
26. Du X.H., Huang J.C., Liu C.T., and Lu Z.P. New criterion of glass forming ability for bulk metallic glasses. J Appl Phys 101 (2007) 086108
27. Du X.H., and Huang J.C. New criterion in predicting glass forming ability of various glass-forming systems. Chin Phys B 17 (2008) 249
28. Lin C.Y., Tien H.Y., and Chin T.S. Soft magnetic ternary iron-boron based bulk metallic glasses. Appl Phys Lett 86 (2005) 162501
29. Lee M.C., Lin C.Y., and Chin T.S. High permeability mano-crystalline FeSiBTaAg ribbons obtained by direct casting. Intermetallics 15 (2007) 1564
30. Tien H.Y., Lin C.Y., and Chin T.S. New ternary Ni-Ta-Sn bulk metallic glasses. Intermetallics 14 (2006) 1075
31. Chang L.R., Young J.H., Jang J.S.C., Huang J.C., and Tsao C.Y.A. Synthesis of the magnesium-based nano/amorphous-composite alloy powder by the combination method of melt-spinning and mechanical alloying. Key Eng Mater 313 (2006) 97
32. 2 composite alloy. Intermetallics 14 (2006) 945
33. Chang L.J., Young J.H., Jang J.S.C., Huang J.C., and Tsao C.Y.A. Mechanical properties of the Mg-based amorphous zincornia composite alloy. Mater Sci Forum 539-543 (2007) 925
34. 2 composite alloy within supercooled temperature region. Key Eng Mater 351 (2007) 103
35. 2 based amorphous matrix composites. Mater Trans 48 (2007) 1797
36. 5 hybrid composites with amorphous and nanostructured phases. Mater Sci Eng A 404 (2005) 49
37. 2. Intermetallics 14 (2006) 1069
38. 5 bulk hybrid composites. Key Eng Mater 351 (2007) 1
39. 5 bulk hybrid composites with amorphous matrix. Mater Trans 48 (2007) 1717
40. Chang K.F., Guo M.L.T., Kong R.H., Tsao C.Y.A., Huang J.C., and Jang J.S.C. Mg-Cu-Gd layered composite plate synthesized via spray forming process. Mater Sci Eng A 477 (2008) 58
41. 5 amorphous powder obtained by mechanical alloying. Mater Chem Phys 84 (2004) 358
42. Lee P.Y., Yao C.J., Chen J.S., Wang L.Y., Jeng R.R., and Lin Y.L. Preparation and thermal stability of mechanically alloyed Cu-Zr-Ti-Y amorphous powders. Mater Sci Eng A 375-377 (2004) 834
43. Lin C.K., Wang C.C., Jeng R.R., Lin Y.L., Yeh C.H., Chu J.P., et al. Preparation and thermal stability of mechanically alloyed Ni-Zr-Ti-Y amorphous powders. Intermetallics 12 (2004) 1011
44. Jeng I.K., and Lee P.Y. Synthesis of Ti-based bulk metallic glass composites containing WC particles. Mater Trans 46 (2005) 2963
45. Lee P.Y., Lo C., Jang J.S.C., and Huang J.C. Mg-Y-Cu bulk nanocrystalline matrix composites containing WC particles. Key Eng Mater 313 (2006) 25
46. Lee P.Y., Kao M.C., Lin C.K., and Huang J.C. Mg-Y-Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing. Intermetallics 14 (2006) 994
47. Lee P.Y., Liu W.C., Lin C.K., and Huang J.C. Fabrication of Mg-Y-Cu bulk metallic glass by mechanical alloying and hot consolidation. Mater Sci Eng A 449-451 (2007) 1095
48. 3 amorphous powders obtained by mechanical alloying. J Alloys Compd 434-435 (2007) 386
49. Hsieh P.J., Hung Y.P., and Huang J.C. Transformation into nano-grained or amorphous state in Zr-X binary systems by accumulated roll bonding. Scr Mater 49 (2003) 173
50. Hsieh P.J., Hung Y.P., Chiu S.Y., and Huang J.C. Nanocrystallization and amorphization mechanisms in Zr-X alloys during accumulated roll bonding. Mater Trans (JIM) 45 (2004) 2686
51. Hsieh P.J., Huang J.C., Hung Y.P., Chiu S.Y., and Jang J.S.C. TEM characterization of nanocrystallization and amorphization evolution in Zr-X alloys during accumulated roll bonding. Mater Chem Phys 88 (2004) 364
52. Hsieh P.J., Huang J.C., Jang J.S.C., and Tsao C.Y.A. Transformation between nanocrystallines and amorphous phases in Zr-X alloys during accumulative roll bonding. J Metastab Nanocryst Mater 24-25 (2005) 351
53. Hsieh P.J., Lo Y.C., Huang J.C., and Chu S.P. On the latest stage of transformation from nanocrystalline to amorphous phases during ARB: simulation and experiment. Intermetallics 14 (2006) 924
54. Hsieh P.J., Lo Y.C., Wang C.T., Huang J.C., and Chu S.P. Cyclic transformation between nanocrystalline and amorphous phases in Zr based intermetallic alloys during ARB. Intermetallics 15 (2007) 644
55. Lo Y.C., Ju S.P., Huang J.C., and Du X.H. Atomic structural evolution of Zr-Ni during accumulative roll bonding using Honeycutt-Anderson (HA) pair analysis. Phys Rev B 76 (2007) 024103
56. Lo Y.C., Huang J.C., and Ju S.P. Atomic structure evolution of Zr-Ti and pure Zr during accumulated roll bonding by HA pair analysis. Mater Chem Phys 112 (2008) 466
57. Chuang C.H., Huang J.C., and Hsieh P.J. Using friction stir processing to fabricate MgAlZn intermetallic alloys. Scr Mater 53 (2005) 1455
58. Chang C.I., Lee C.J., Chuang C.H., Pei H.R., and Huang J.C. On Mg-Al-Zn intermetallic alloys made by friction stir processing containing quasi-crystals and amorphous phases. Adv Mater Res 15-17 (2007) 387
59. Chen H.M., Chang Y.C., Hung T.H., Huang J.C., Jang J.S.C., and Liaw P.K. Compression properties of Mg-Cu-Gd bulk metallic glasses with various specimen height to diameter ratios. Mater Trans 48 (2007) 1802
60. 10 metallic glass. Appl Phys Lett 91 (2007) 161913
61. Lai Y.H., Lee C.J., Cheng Y.T., Chen H.M., Chou H.S., Du X.H., et al. Bulk and microscale compressive properties of Zr-based metallic glass. Scr Mater 58 (2008) 890
62. Tang CW. MS Thesis, National Sun Yat-Sen University, Kaohsiung, Taiwan; 2008.
63. Wu W.F., Li Y., and Schuh C.A. Philos Mag 88 (2008) 71
64. Jang J.S.C., Ciou J.Y., Hung T.H., Huang J.C., and Du X.H. Enhanced mechanical performance of Mg based metallic glass with porous Mo particles. Appl Phys Lett 92 (2008) 011930
65. Jang JSC, Jian SR, Li TH, Huang JC, Tsao Chi YA, Liu CT. Structural and mechanical characterizations of ductile Fe particles reinforced Mg-based bulk metallic glass composites, J. Alloys Compd, submitted for publication.
66. Jang JSC, Huang JC, Du XH. Plasticity enhancement of Mg-based bulk metallic glass with ductile Ta particles, unpublished research; 2008.
67. Honeycutt J.D., and Andersen H.C. J Phys Chem 91 (1987) 4950
68. Chu J.P., Liu C.T., Wang S.F., Mahalingam T., O'Keefe M.J., Johnson B., et al. Annealing-induced full amorphization in a multicomponent metallic film. Phys Rev B 69 (2004) 113410
69. Chu J.P., Lo C.T., Fang Y.K., and Han B.S. On annealing-induced amorphization and anisotropy in a ferromagnetic Fe-based film: a magnetic and property study. Appl Phys Lett 88 (2006) 012510
70. Chiang C.L., Chu J.P., Liu F.X., Liaw P.K., and Buchanan R.A. A 200 nm thick glass-forming metallic film for fatigue-property enhancements. Appl Phys Lett 88 (2006) 131902
71. Liu F.X., Liaw P.K., Jiang W.H., Chiang C.L., Gao Y.F., Guan Y.F., et al. Fatigue-resistance enhancements by glass-forming metallic films. Mater Sci Eng A 468-470 (2007) 246
72. Chen C.J., Huang J.C., Lai Y.H., Chou H.S., Chang L.W., Du X.H., et al. On the amorphous and nanocrystalline Zr-Cu and Zr-Ti sputtered thin films. J Alloys Compd (2009) 10.1016/j.jallcom.2008.07.188
73. Chou H.S., Huang J.C., Chang L.W., and Nieh T.G. Structural relaxation and nanoindentation response in Zr-Cu-Ti amorphous thin films. Appl Phys Lett 93 (2008) 191901
74. Chou H.S., Huang J.C., Lai Y.H., Chang L.W., Du X.H., Chu J.P., et al. Amorphous and nanocrystalline sputtered Mg-Cu thin films. J Alloys Compd (2009) 10.1016/j.jallcom.2008.07.187
75. 6 bulk amorphous alloy at 600-700 °C. Intermetallics 14 (2006) 917
76. 23.5 bulk metallic glass at 400-600 °C. Intermetallics 15 (2007) 1459
77. 15 bulk metallic glass at 375-520 °C. Oxid Met 68 (2007) 177
78. Hsieh H.H., Kai W., Jang W.L., Huang R.T., Lee P.Y., and Wang W.H. The oxidation behavior of Cu-Zr-Ti-base bulk metallic glasses in air at 350-500 °C. Oxid Met 67 (2007) 179
79. 5Y-particle composite at 400-600 °C. Intermetallics 16 (2008) 629
80. Kai W., Ho T.H., Hsieh H.H., Chen Y.R., Qiao D.C., Jiang F., et al. Oxidation behavior of CuZr-based glassy alloys at 400-500 °C in dry air. Metall Mater Trans A 39 (2008) 1838
81. 2 bulk metallic glass at 600-725 °C. Mater Trans 48 (2007) 1864
82. 20 bulk amorphous alloy containing crystalline composites at 325-450 °C. Mater Sci Forum 539-543 (2007) 2117
83. 4 amorphous alloy in 3.5% NaCl solution. Mater Lett 62 (2008) 1554
84. 20 alloys in aqueous solutions. Mater Lett 60 (2006) 2416
85. 2 amorphous alloys. Mater Lett 59 (2005) 2542
86. Lin H.M., Wu J.K., Wang C.C., and Lee P.Y. The corrosion behavior of mechanically alloyed Cu-Zr-Ti bulk metallic glasses. Mater Lett 62 (2008) 2995
87. 11 alloy. Intermetallics 15 (2007) 1303
88. Chang Y.C., Huang J.C., Cheng Y.T., Lee C.J., Du X.H., and Nieh T.G. Effect of silver or boron on viscosity and thermomechanical properties in Mg-Cu-Gd metallic glasses. J Appl Phys 103 (2008) 103521
89. Chang Y.C., Tang C.W., Huang J.C., and Nieh T.G. Viscous flow behavior and workability of Mg-Cu-(Ag)-Gd based bulk metallic glasses. Mater Trans 49 (2008) 2605
90. Jang J.S.C., Tseng C.T., Chang L.J., Huang J.C., Yeh Y.C., and Jou J.L. Thermoplastic forming properties and microreplication ability of a Mg-based bulk metallic glass. Adv Eng Mater 10 (2008) 1048
91. 20 Alloy: a compression study. Intermetallics 10 (2002) 1191
92. 5 alloy at 700 K. Scr Mater 49 (2003) 435
93. Chiang C.L., Chu J.P., Lo C.T., Nieh T.G., Wang Z.X., and Wang W.H. Homogeneous plastic deformation in a Cu-based bulk amorphous alloy. Intermetallics 12 (2004) 1057
94. Chu J.P., Chiang C.L., Wijaya H., Huang R.T., Wu C.W., Zhang B., et al. Compressive deformation of a bulk Ce-based metallic glass. Scr Mater 55 (2006) 227
95. Chu J.P., Wijaya H., Wu C.W., Tsai T.R., Wei C.S., Nieh T.G., et al. Nanoimprint of gratings on a bulk metallic glass. Appl Phys Lett 90 (2007) 034101
96. Jang JSC, unpublished research work, I-Shou University, Kaohsiung, Taiwan; 2008.
97. Pan C.T., Wu T.T., Chang Y.C., and Huang J.C. Experiment and simulation of hot embossing of a bulk metallic glass with low pressure and temperature. J Micromech Microeng 18 (2008) 025010
98. Pan C.T., Wu T.T., Chen M.F., Hwang Y.M., Chang Y.C., Lee C.J., et al. Hot embossing of micro-lens array on bulk metallic glass. Sensors Actuators A Phys 141 (2008) 422
99. Chang Y.C., Wu T.T., Chen M.F., Lee C.J., Huang J.C., and Pan C.T. Finite element simulation of micro-imprinting in Mg-Cu-Y amorphous alloy. Mater Sci Eng A 499 (2008) 153
100. 16.3 metallic glasses in supercooled region. Adv Mater Res 47-50 (2008) 266