Wear behaviour in total ankle replacement: A comparison between an in vitro simulation and retrieved prostheses

Clinical Biomechanics

Volumn 24, Issue 8, 2009, Pages 661-669

  Affatato, S ^a   Taddei, P ^b   Leardini, A ^a   Giannini, S ^a   Spinelli, M ^a   Viceconti, M ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

CMM; Raman spectroscopy; SEM; Talar component; Three compartment ankle prosthesis

Indexed keywords

ANKLE JOINTS; ANTERIOR POSTERIORS; ANTICLASTIC; ARTIFICIAL JOINT; CMM; EXTERNAL ROTATION; IN-BETWEEN; IN-VITRO; JOINT SIMULATOR; METAL COMPONENTS; MICRO RAMAN SPECTROSCOPY; MICROSCOPIC OBSERVATIONS; RAMAN CRYSTALLINITY; SAGITTAL PLANE; SCANNING ELECTRON MICROSCOPE; SEM; TALAR COMPONENT; THREE COMPARTMENT ANKLE PROSTHESIS; THREE-COMPONENT; ULTRA-HIGH-MOLECULAR-WEIGHT; WEAR LIFE; WEAR PATTERN; WEAR RATES; WEAR SIMULATORS; WEAR TEST; WORN COMPONENTS;

COORDINATE MEASURING MACHINES; MACHINE COMPONENTS; RAMAN SCATTERING; RAMAN SPECTROSCOPY; SCANNING; SCANNING ELECTRON MICROSCOPY; SIMULATORS; WEAR OF MATERIALS;

JOINT PROSTHESES;

ARTICLE; KNEE FUNCTION; KNEE PROSTHESIS; MECHANICAL STRESS; PRIORITY JOURNAL; RAMAN SPECTROMETRY; SCANNING ELECTRON MICROSCOPY; SIMULATION; TOTAL KNEE REPLACEMENT;

ANKLE JOINT; DEVICE REMOVAL; EQUIPMENT FAILURE ANALYSIS; HUMANS; JOINT PROSTHESIS; PROSTHESIS DESIGN;

EID: 68749110812     PISSN: 02680033     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.clinbiomech.2009.06.006     Document Type: Article

References (39)

1. 2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro study. Biomaterials 22 (2001) 717-723
2. Affatato S., Bersaglia G., Rocchi M., Taddei P., Fagnano C., and Toni A. Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions. Biomaterials 26 (2005) 3259-3267
3. Affatato S., Leardini A., Leardini W., Giannini S., and Viceconti M. Meniscal wear at a three-component total ankle prosthesis by a knee joint simulator. J. Biomech. 40 (2007) 1871-1876
4. Affatato S., Rocchi M., Fagnano C., and Viceconti M. The effects of irradiation and EtO-treatment on ultrahigh molecular weight polyethylene acetabular cups following accelerated aging: degradation of mechanical properties and morphology changes during hip simulator tests. J. Mol. Struct. 875 (2008) 254-263
5. Bell C.J., and Fisher J. Simulation of polyethylene wear in ankle joint prostheses. J. Biomed. Mater. Res. Part B, Appl. Biomaterials 81 (2007) 162-167
6. Bertoluzza A., Fagnano C., Rossi M., Tinti A., and Cacciari G.L. Micro-Raman spectroscopy for the crystallinity characterization of UHMWPE hip cups run on joint simulators. J. Mol. Struct. 521 (2000) 89-95
7. Bonnin M., Judet T., Colombier J.A., Buscayret F., Graveleau N., and Piriou P. Midterm results of the Salto total ankle prosthesis. Clin. Orthop. Rel. Res. 424 (2004) 6-18
8. Brown S.S., and Clarke I.C. A review of lubrication conditions for wear simulation in artificial hip replacements. Tribol. Trans. 49 (2006) 72-78
9. Citra M.J., Chase D.B., Ikeda R.M., and Gardner K.H. Molecular orientation of high-density polyethylene fibers characterized by polarized Raman spectroscopy. Macromolecules 28 (1995) 4007-4012
10. Collier J.P., Sutula L.C., Currier B.H., Currier J.H., Wooding R.E., Williams I.R., Farber K.B., and Mayor M.B. Overview of polyethylene as a bearing material. Clin. Orthop. Rel. Res. 333 (1996) 76-86
11. Corazza F., O'Connor J.J., Leardini A., and Parenti Castelli V. Ligament fibre recruitment and forces for the anterior drawer test at the human ankle joint. J. Biomech. 36 (2003) 363-372
12. Cracchiolo A., and DeOrio J.K. Design features of current total ankle replacements: implants and instrumentation. J. Am. Acad. Orthop. Surg. 16 9 (2008) 530-540
13. Deorio J.K., and Easley M.E. Total ankle arthroplasty. Instr. Course Lect. 57 (2008) 383-413
14. Edidin A.A., Pruitt L., Jewett C.W., Crane D.J., Roberts D., and Kurtz S.M. Plasticity-induced damage layer is a precursor to wear in radiation-cross-linked UHMWPE acetabular components for total hip replacement. J. Arthroplasty 14 (1999) 616-627
15. Geladi P., and Kowslski B.R. Partial least-squares regression: a tutorial. Anal. Chim. Acta 185 (1986) 1-17
16. Haddad S.L., Coetzee J.C., Estok R., Fahrbach K., Banel D., and Nalysnyk L. Intermediate and long-term outcomes of total ankle arthroplasty and ankle arthrodesis. A systematic review of the literature. J. Bone Joint Surg. Am. 89 9 (2007) 1899-1905
17. Hahn D.W., Wolfarth D.L., and Parks N.L. Analysis of polyethylene wear debris using micro-Raman spectroscopy: a report on the presence of beta-carotene. J. Biomed. Mater. Res. 35 (1997) 31-37
18. Hintermann B., Valderrabano V., Dereymaeker G., and Dick W. The HINTEGRA ankle: rationale and short-term results of 122 consecutive ankles. Clin. Orthop. Rel. Res. 424 (2004) 57-68
19. Hoffmann A.H., and Fink B. Modern three-piece total ankle replacement: Frequency and causes of luxation and premature wear of the polyethylene bearing. Orthopade 36 10 (2007) 908-916
20. ISO 14243-2, 2000. Implants for Surgery - Wear of Total Knee-Joint Prostheses - Part 2: Methods of Measurement, International Organization for Standardization.
21. ISO 14243-1, 2002. Implants for Surgery - Wear of Total Knee Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing Machines with Load Control and Corresponding Environmental Conditions for Tests, International Organization for Standardization.
22. Kofoed H. Scandinavian total ankle replacement (STAR). Clin. Orthop. Rel. Res. 424 (2004) 73-79
23. Lafrance C.P., Chabot P., Pigeon M., Prud'homme R.E., and Pézolet M. Study of the distribution of the molecular orientation in thick polyethylene samples by X-ray diffraction, infra-red dichroism and Raman spectroscopy. Polymer 34 (1993) 5029-5037
24. Leardini A., O'Connor J.J., Catani F., and Giannini S. Kinematics of the human ankle complex in passive flexion - a single degree of freedom system. J. Biomech. 32 (1999) 111-118
25. Leardini A., Catani F., Giannini S., and O'Connor J.J. Computer-assisted design of the sagittal shapes for a novel total ankle replacement. Med. Biol. Eng. Comp. 39 (2001) 168-175
26. Leardini A., O'Connor J.J., Catani F., and Giannini S. Mobility of the human ankle and the design of total ankle replacement. Clin. Orthop. Rel. Res. 424 (2004) 39-46
27. Li S., and Burstein A.H. Ultra-high molecular weight polyethylene. The material and its use in total joint implants. J. Bone Joint Surg. Am. 76 (1994) 1080-1090
28. Luu D.V., Cambon L., and Lapeyre C. Caractérisation des phases dans le polyéthylène par effet Raman. J Raman Spectrosc. 9 (1980) 172-175
29. McGuire M.R., Kyle R.F., Gustillo R.B., and Premer R.F. Comparative analysis of ankle arthroplasty versus ankle arthrodesis. Clin. Orthop. 226 (1988) 174-181
30. McKellop, H.A., Liao, Y.S., Liu, T.-S., Benya, P.D., Campbell, P., 1999. In: Lubricating Properties of Bovine Serum and Human Joint Fluids in Wear Testing of Conference, 45th ORS, California, USA.
31. Reggiani B., Leardini A., Corazza F., and Taylor M. Finite element analysis of a total ankle replacement during the stance phase of gait. J. Biomech. 39 (2006) 1435-1443
32. Rull F., Prieto A.C., Casado J.M., Sobron F., and Edwards H.G.M. Estimation of crystallinity in polyethylene by Raman spectroscopy. J. Raman Spectrosc. 24 (1993) 545-550
33. Saito S., and Tasumi M. Normal coordinate analysis of beta-carotene isomers and assignments of the Raman and IR bands. J. Raman Spectrosc. 14 (1983) 310-321
34. Taddei P., Affatato S., Fagnano C., Bordini B., Tinti A., and Toni A. Vibrational spectroscopy of ultra-high molecular weight polyethylene hip prostheses: influence of the sterilisation method on crystallinity and surface oxidation. J. Mol. Struct. 613 (2002) 121-129
35. Taddei P., Affatato S., Rocchi M., Fagnano C., and Viceconti M. The effects of irradiation and EtO-treatment on ultrahigh molecular weight polyethylene acetabular cups following accelerated aging: degradation of mechanical properties and morphology changes during hip simulator tests. J. Mol. Struct. 875 (2008) 254-263
36. Vickerstaff J.A., Miles A.W., and Cunningham J.L. A brief history of total ankle replacement and a review of the current status. Med. Eng. Phys. 29 10 (2007) 1056-1064
37. Wang A., Essner A., Stark C., and Dumbleton J.H. Comparison of the size and morphology of UHMWPE wear debris produced by a hip joint simulator under serum and water lubricated conditions. Biomaterials 17 (1996) 865-871
38. Wannomae K.K., Bhattacharyya S., Freiberg A., Estok D., Harris W.H., and Muratoglu O. In vivo oxidation of retrieved cross-linked ultra-high-molecular-weight polyethylene acetabular components with residual free radicals. J. Arthroplasty 21 (2006) 1005-1011
39. Younger A., Penner M., and Wing K. Mobile-bearing total ankle arthroplasty. Foot Ankle Clin. 13 3 (2008) 495-508