Meniscal wear at a three-component total ankle prosthesis by a knee joint simulator

Journal of Biomechanics

Volumn 40, Issue 8, 2007, Pages 1871-1876

  Affatato, S ^a   Leardini, A ^b   Leardini, W ^a   Giannini, S ^b   Viceconti, M ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b Movement Analysis Laboratory   (Italy)

Author keywords

Knee wear simulator; Meniscal bearing; Total ankle replacement

Indexed keywords

BIOMATERIALS; JOINTS (ANATOMY); TRANSPLANTATION (SURGICAL); WEAR OF MATERIALS;

KNEE WEAR SIMULATORS; MENISCAL BEARING; TOTAL ANKLE REPLACEMENT;

PROSTHETICS;

ANKLE; ARTHROPLASTY; ARTICLE; IN VITRO STUDY; KNEE MENISCUS RUPTURE; PRIORITY JOURNAL; PROSTHESIS; SIMULATION; TALUS; TIBIA; TOTAL ANKLE PROSTHESIS; WALKING;

ANKLE JOINT; BIOMIMETICS; EQUIPMENT FAILURE ANALYSIS; HUMANS; JOINT PROSTHESIS; KNEE JOINT; PROSTHESIS DESIGN; PROSTHESIS FAILURE;

EID: 34248189805     PISSN: 00219290     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jbiomech.2006.08.002     Document Type: Article

References (47)

1. Affatato S., Frigo M., and Toni A. An in vitro investigation of Diamond-like Carbon as a femoral head coating. Journal of Biomedical Materials Research-Applied Biomaterials 53 (2000) 221-226
2. Affatato S., Vandelli C., Bordini B., and Toni A. Fluid absorption study in ultra-high molecular weight polyethylene (UHMWPE) sterilized and unsterilized acetabular cups. Proceedings of the Institution of Mechanical Engineers [H] 215 (2001) 107-111
3. 2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro study. Biomaterials 22 (2001) 717-723
4. Barnett P.I., McEwen H.M., Auger D.D., Stone M.H., Ingham E., and Fisher J. Investigation of wear of knee prostheses in a new displacement/force-controlled simulator. Proceedings of the Institution of Mechanical Engineers [H] 216 (2002) 51-61
5. Bauer G., Eberhardt O., Rosenbaum D., and Claes L. Total ankle replacement: review and critical analysis of the current status. Foot & Ankle Surgery 2 (1996) 119-126
6. Benson L.C., DesJardins J.D., and LaBerge M. Effects of in vitro wear of machined and molded UHMWPE tibial inserts on TKR kinematics. Journal of Biomedical Materials Research-Applied Biomaterials 58 (2001) 496-504
7. Bonnin M., Judet T., Colombier J.A., Buscayret F., Graveleau N., and Piriou P. Midterm results of the Salto total ankle prosthesis. Clinical Orthopaedics and Related Research 424 (2004) 6-18
8. Carlsson A., Markusson P., and Sundberg M. Radiostereometric analysis of the double-coated STAR total ankle prosthesis: a 3-5 year follow-up of five cases with rheumatoid arthritis and five cases with osteoarthrosis. Acta Orthopaedica Scandinavica 76 (2005) 573-579
9. Clarke I.C., Good V., Williams P., Schroeder D., Anissian L., Stark A., Oonishi H., Schuldies J., and Gustafson G. Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements. Proceedings of the Institution of Mechanical Engineers [H] 214 (2000) 331-347
10. Corazza F., O'Connor J.J., Leardini A., and Parenti Castelli V. Ligament fibre recruitment and forces for the anterior drawer test at the human ankle joint. Journal of Biomechanics 36 (2003) 363-372
11. DesJardins J.D., Walker P.S., Haider H., and Perry J. The use of a force controlled dynamic knee simulator to quantify the mechanical performance of total knee replacement designs during functional activity. Journal of Biomechanics 33 (2000) 1231-1241
12. Dumbleton J.H., and Manley M.T. Metal-on-metal total hip replacement: what does the literature say?. Journal of Arthroplasty 20 (2005) 174-188
13. Firkins P.J., Tipper J.L., Ingham E., Stone M.H., Farrar R., and Fisher J. A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis. Journal of Biomechanics 34 (2001) 1291-1298
14. Fisher, J., Firkins, P.J., Tipper, J., Ingham, E., Stone, M.H., Farrar, R., 2001. In vitro wear performance of contemporary alumina: alumina bearing couple under anatomically relevant hip joint simulation. In: Toni, A., Willmann, G. (Eds.), Conference, Bioceramic in Joint Arthroplasty. Proceedings of Sixth International Biolox Symposium, Germany.
15. Giannini S., Leardini A., and O'Connor J.J. Total ankle replacement: review of the designs and of the current status. Foot and Ankle Surgery 6 (2000) 81-89
16. Gill L.H. Related principles of joint arthroplasty as applied to the ankle. Instrumentation Course Lecture 51 (2002) 117-128
17. Goldsmith A.A., and Dowson D. A multi-station hip joint simulator study of the performance of 22 mm diameter zirconia-ultra-high molecular weight polyethylene total replacement hip joints. Proceedings of the Institution of Mechanical Engineers [H] 213 (1999) 77-90
18. Greenwald A.S., and Heim C.S. Mobile-bearing knee systems: ultra-high molecular weight polyethylene wear and design issues. Instrumentation Course Lecture Review 54 (2005) 195-205
19. Harris W.H. Highly cross-linked, electron-beam-irradiated, melted polyethylene: some pros. Clinical Orthopaedics and Related Research 429 (2004) 63-67
20. Hintermann B., Valderrabano V., Dereymaeker G., and Dick W. The HINTEGRA ankle: rationale and short-term results of 122 consecutive ankles. Clinical Orthopaedics and Related Research 424 (2004) 57-68
21. ISO 14242-2, 2000. Implants for surgery-wear of total hip joint prostheses-Part 2: Method of measurement.
22. ISO 14243-2. Implants for Surgery-Wear of Total Knee-joint Prostheses-Part 2: Methods of Measurement (2000), International Organization for Standardization
23. Jazrawi L.M., Bogner E., Della Valle C.J., Chen F.S., Pak K.I., Stuchin S.A., Frankel V.H., and Di Cesare P.E. Wear rates of ceramic-on-ceramic bearing surfaces in total hip implants: a 12-year follow-up study. Journal of Arthroplasty 14 (1999) 781-787
24. Kofoed H. Scandinavian total ankle replacement (STAR). Clinical Orthopaedics and Related Research 424 (2004) 73-79
25. Leardini A., O'Connor J.J., Catani F., and Giannini S. Kinematics of the human ankle complex in passive flexion-a single degree of freedom system. Journal of Biomechanics 32 (1999) 111-118
26. Leardini A., O'Connor J.J., Catani F., and Giannini S. Mobility of the human ankle and the design of total ankle replacement. Clinical Orthopaedics and Related Research 424 (2004) 39-46
27. Liao Y.S., McKellop H., Lu Z., Campbell P., and Benya P. The effect of frictional heating and forced cooling on the serum lubricant and wear of UHMW polyethylene cups against cobalt-chromium and zirconia balls. Biomaterials 24 (2003) 3047-3059
28. McKellop, H., Lu, B., Benya, P., 1992. Friction, lubrication and wear of cobalt-chromium, alumina and zirconia hip prostheses compared on a joint simulator. February 17-20 of Conference, 38th Annual Meeting, Orthopaedic Research Society, Washington, DC, February, pp. 17-20.
29. McKellop H., Park S.H., Chiesa R., Doorn P., Lu B., Normand P., Grigoris P., and Amstutz H. In vivo wear of three types of metal on metal hip prostheses during two decades of use. Clinical Orthopaedics and Related Research (1996) S128-S140
30. Miller M.C., Smolinski P., Conti S., and Galik K. Stresses in polyethylene liners in a semiconstrained ankle prosthesis. Journal of Biomechanical Engineering 126 (2004) 636-640
31. Ministero, S., 2006. 〈www.ministerosalute.it/programmazione/sdo/sdo.jsp〉.
32. Nevelos J.E., Ingham E., Doyle C., Nevelos A.B., and Fisher J. The influence of acetabular cup angle on the wear of "Biolox Forte" alumina ceramic bearing couples in a hip joint simulator. Journal of Materials Science-Materials in Medicine 12 (2001) 141-144
33. Price A.J., Short A., Kellett C., Beard D., Gill H., Pandit H., Dodd C.A., and Murray D.W. Ten-year in vivo wear measurement of a fully congruent mobile bearing unicompartmental knee arthroplasty. Journal of Bone and Joint Surgery-British 87 (2005) 1493-1497
34. Reggiani B., Leardini A., Corazza F., and Taylor M. Finite element analysis of a total ankle replacement during the stance phase of gait. Journal of Biomechanics 39 (2006) 1435-1443
35. Saikko V. A 12-station anatomic hip joint simulator. Proceedings of the Institution of Mechanical Engineers [H] 219 (2005) 437-448
36. Saikko V., Paavolainen P.O., and Slatis P. Wear of the polyethylene acetabular cup. Metallic and ceramic heads compared in a hip simulator. Acta Orthopaedica Scandinavica 64 (1993) 391-402
37. Saikko V., Ahlroos T., Calonius O., and Keränen. Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon. Biomaterials 22 (2001) 1507-1514
38. Salernitano E., and Migliaresi C. Composite materials for biomedical applications: a review. Journal of Applied Biomaterials and Biomechanics 1 (2003) 3-18
39. Saltzman C.L., McIff T.E., Buckwalter J.A., and Brown T.D. Total ankle replacement revisited. Journal of Orthopaedic and Sports Physical Therapy 30 (2000) 56-67
40. Schmidig, G., Essner, A., Wang, A., 2000. Knee simulator wear of cross-linked UHMWPE. of Conference, ORS, Florida.
41. Silva M., Heisel C., and Schmalzried T.P. Metal-on-metal total hip replacement. Clinical Orthopaedics and Related Research (2005) 53-61
42. Skinner H.B. Ceramic bearing surfaces. Clinical Orthopaedics and Related Research (1999) 83-91
43. Smith S.L., and Unsworth A. A five-station hip joint simulator. Proceedings of the Institution of Mechanical Engineers 215 (2001) 61-64
44. Stengel D., Bauwens K., Ekkernkamp A., and Cramer J. Related Efficacy of total ankle replacement with meniscal-bearing devices: a systematic review and meta-analysis. Archives of Orthopaedic and Trauma Surgery 125 (2005) 109-119
45. Valderrabano V., Hintermann B., Nigg B.M., Stefanyshyn D., and Stergiou P. Kinematic changes after fusion and total replacement of the ankle: part 1: range of motion. Foot and Ankle International 24 (2003) 881-887
46. Walker P.S., Blunn G.W., and Broome D.R. A knee simulating machine for performance evaluation of total knee replacements. Journal of Biomechanics 30 (1997) 83-89
47. Wright T.M. Polyethylene in knee arthroplasty: what is the future?. Clinical Orthopaedics and Related Research 440 (2005) 141-148