Postimplantation pressure testing and characterization of laser bonded glass/polyimide microjoints

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 90 B, Issue 2, 2009, Pages 614-620

  Mian, Ahsan ^a   Sultana, Taslema ^b   Georgiev, Daniel ^c   Witte, Reiner ^d   Herfurth, Hans ^d   Auner, Greg ^b   Newaz, Golam ^b  

^a Montana State University   (United States)

^b Wayne State University   (United States)

^c The University of Toledo   (United States)

^d Fraunhofer Center for Laser Technology   (United States)

Author keywords

Biocompatibility; Bioencapsulation; Cerebrospinal fluid; Laser joint; Neural implants

Indexed keywords

BIOCOMPATIBILITY; BODY FLUIDS; BOND STRENGTH (CHEMICAL); BRAIN; POLYIMIDES; PRESSURE REGULATORS; TITANIUM;

BIOENCAPSULATION; BOND DEGRADATION; BOND STRENGTH; CEREBRO SPINAL FLUIDS; CEREBROSPINAL FLUID; EXPOSURE-TIME; HERMETICITY; HERMITICITY; HIGH PRESSURE NITROGEN; IMPLANTED SAMPLES; IN-VIVO; LASER FABRICATION; LASER JOINT; NEURAL IMPLANTS; POST-IMPLANTATION; PRESSURE LOAD; PRESSURE TESTING; PRESSURE TESTS; RAT BRAIN;

LASERS;

GLASS; NITROGEN; POLYIMIDE; TITANIUM;

ANIMAL TISSUE; ARTICLE; BRAIN CORTEX; CEREBROSPINAL FLUID; CHEMICAL BOND; CONTROLLED STUDY; FEMALE; IN VIVO STUDY; JOINT CAVITY; JOINT PRESSURE; JOINT PROSTHESIS; LASER; MATERIAL COATING; NANOENCAPSULATION; NONHUMAN; OXIDATION; PARAMETER; POROSITY; PRESSURE MEASUREMENT; RAT; STRENGTH; WATER TRANSPORT;

EID: 67749108637     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31325     Document Type: Article

References (17)

1. Wild MJ, Gillner A, Poprawe R. Locally selective bonding of silicon and glass with laser. Sensors Actuators A 2001;93:63-67. (Pubitemid 32902556)
2. Bauer I, Russek UA, Herfurth H, Witte R, Heinemann S, Newaz G, Mian A, Georgiev DG, Auner G. Laser micro-joining of dissimilar and biocompatible materials. In: The Proceedings of SPIE-Photonics West LASE 2004: Lasers and Applications in Science and Engineering Conference, San Jose, California, January 24-29, 2004;5339:454-464.
3. Georgiev DG, Beird RJ, Newaz G, Auner G, Witte R, Herfurth H. An XPS study of laser-fabricated polyimide/titanium interfaces. Appl Surf Sci 2004;236:71-76.
4. Mian A, Newaz G, Vendra L, Rahman N, Georgiev DG, Auner G, Witte R, Herfurth H. Laser bonded microjoints between titanium and polyimide for applications in medical implants. J Mater Sci Mater Med 2005;16:229-237. (Pubitemid 40386276)
5. Mahmood T, Mian A, Amin M, Auner G, Witte R, Herfurth H, Newaz G. Finite element modeling of transmission laser microjoining process. J Mater Process Technol 1007;186:37-44
6. Newaz G, Mian A, Sultana T, Mahmood T, Georgiev DG, Auner G, Witte R, Herfurth H. A comparison between glass/ polyimide and titanium/polyimide microjoint performances in cerebrospinal fluid. J Biomed Mater Res A 2006;79:159-165. (Pubitemid 44452866)
7. Mian A, Sultana T, Auner G, Newaz G. Bonding mechanisms of laser fabricated titanium/polyimide and titanium coated glass/polyimide microjoints. Surf Interface Anal 2007;39:506-511. (Pubitemid 46786996)
8. Georgiev DG, Sultana T, Mian A, Auner G, Herfurth H, Witte R, Newaz G. Laser fabrication and characterization of sub-millimeter joints between polyimide and ti-coated borosilicate glass. J Mater Sci 2005;40:5641-5647. (Pubitemid 41500374)
9. Mian A, Newaz G, Mahmood T, Auner G, Witte R, Herfurth H. Mechanical characterization of glass/polyimide microjoints fabricated using cw fiber and diode lasers. J Mater Sci 2007; 42:8150-8157. (Pubitemid 47169384)
10. Mian A, Newaz G, Georgiev D, Rahman N, Vendra J, Auner G, Witte R, Herfurth H. Performance of laser bonded glass/ polyimide microjoints in cerebrospinal fluid. J Mater Sci Mater Med 2007;18:417-427. (Pubitemid 46363656)
11. Park IS, Ahn EC, Yu J, Lee HY. Cohesive failure of the cu/ polyimide system. Mater Sci Eng A 2000;282:137-144.
12. Iwamori S, Miyashita T, Fukuda S, Fukuda N, Sudoh K. Effect of a metallic interfacial layer on peel strength deterioration between a Cu thin film and a polyimide substrate. J Vac Sci Technol B 1997;15:53-59. (Pubitemid 127574169)
13. Buchhold R, Nakladal A, Gerlach G, Sahre K, Mueller M, Eichhorn KJ, Herold M, Gauglitz G. Study on the microphysical mechanisms of adsorption in polyimide layers for microelectronic applications. J Electrochem Soc 1998;145:4012-4018. (Pubitemid 128612596)
14. Dlubek G, Buchhold R, Hübner CH, Nakladal A. Water in local free volumes of polyimides: A positron lifetime study. Macromolecules 1999;32:2348-2355.
15. Clearfield HM, Furman BK, Callegari A, Graham T, Purushothaman S. Factors affecting metal-polymer interface durability in microelectronics packaging: Chemistry and water uptake. Mater Res Soc Symp Proc (Electronic Packaging Materials Science VII) 1994;323:321-331.
16. Clearfield HM, Furman BK, Callegari A, Graham T, Purushothaman S. The role of physical and chemical structure in the long-term durability of metal/polyimide interfaces. Int J Microcircuits Electron Packag 1994;17:228-235.
17. Test method standard microcircuits. MIL-STD-883E. USA: Department of defense 1995.