Quantitative impact testing of energy dissipation at surfaces

Experimental Mechanics

Volumn 49, Issue 4, 2009, Pages 511-522

  Constantinides, G ^a,c   Tweedie, C A ^a   Savva, N ^b   Smith, J F ^d   Vliet, K J ^a  

^a Massachusetts Institute of Technology Cambridge   (United States)

^b MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

^c CYPRUS UNIVERSITY OF TECHNOLOGY   (Cyprus)

^d MICRO MATERIALS LTD   (United Kingdom)

Author keywords

Coefficient of restitution; Dynamic hardness; Energy dissipation; Impact; Nanoindentation

Indexed keywords

ABSORPTION MECHANISMS; COEFFICIENT OF RESTITUTION; CONTACT MODELS; CONTACT VELOCITY; DIRECT ACCESS; DYNAMIC HARDNESS; EXPERIMENTAL APPROACHES; FUNCTION OF TIME; IMPACT; IMPACT DEFORMATION; IMPACT RESPONSE; IMPACT VELOCITIES; INDENTER; MATERIAL CONSTANT; MATERIAL PENETRATION; MECHANICAL RESPONSE; NANO SCALE; PENDULUM DISPLACEMENT; RESIDUAL DEFORMATION; SPECIFIC RESISTANCES; SPECIMEN SURFACES; TEMPORAL RESOLUTION;

ABSORPTION; ALUMINA; DEFORMATION; ELECTRON ENERGY LOSS SPECTROSCOPY; ENERGY ABSORPTION; ENERGY DISSIPATION; ENERGY DISSIPATORS; EXTRACTION; HARDNESS; IMPACT RESISTANCE; IMPACT TESTING; NANOINDENTATION; PENDULUMS; VELOCITY; VICKERS HARDNESS TESTING;

SURFACES;

EID: 67650257585     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-008-9198-1     Document Type: Article

References (36)

1. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. J Mater Res 19:3-20
2. Cheng YT, Cheng CM (2004) Scaling, dimensional analysis, and indentation measurements. Mater Sci Eng R 44:91-149
3. Sneddon IN (1965) The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. Int J Eng Sci 3:47-57
4. Binnig G, Quate C, Gerber C (1986) Atomic force microscope. Phys Rev Lett 56:930-933
5. Beake BD, Goodes SR, Smith JF, Gao F (2004) Nanoscale repetitive impact testing of polymer films. J Mater Res 19:237-247
6. Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc B 62:676-700
7. Wilkins M, Guinan M (1973) Impact of cylinders on a rigid boundary. J Appl Phys 44:1200-1206
8. Davis C, Hunter S (1960) Assesment of the strain-rate sensitivity of metals by indentation with conical indenters. J Mech Phys Solids 8:235-254
9. Sughash G, Zhang H (2007) Dynamic indentation response of ZrHf-based bulk metallic glasses. J Mater Res 22:478-485
10. Tirupataiah Y, Sundararajan G (1991) A dynamic indentation technique for the characterization of the high-strain rate plastic-flow behavior of ductile metals and alloys. J Mech Phys Solids 39:243-271
11. Johnson KL (1985) Contact mechanics. Cambridge University Press, Cambridge
12. French AP (1971) Vibrations and waves. W.W. Norton, New York
13. Neideck K, Franzel W, Grau P (1999) Dynamic ball hardness tests on polymers. J Macromol Sci B 38:669-680
14. Bhattacharya AK, Nix WD (1988) Analysis of elastic and plastic-deformation associated with indentation testing of thin-films on substrates. Int J Solids Struct 24:1287-1298
15. Nix WD (1997) Elastic and plastic properties of thin films on substrates: Nanoindentation techniques. Mater Sci Eng A Struct 234:37-44
16. Saha R, Nix WD (2002) Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater 50:23-38
17. Savage MF, Tatalovich J, Zupan M, Hemker KJ, Mills MJ (2001) Deformation mechanisms and microtensile behavior of single colony ti-6242si. Mater Sci Eng A Struct 319:398-403
18. Greer JR, Nix WD (2005) Size dependence of mechanical properties of gold at the sub-micron scale. Appl Phys A Mater 80:1625-1629
19. Tadmor EB, Miller R, Phillips R, Ortiz M (1999) Nanoindentation and incipient plasticity. J Mater Res 14:2233-2250
20. Van Vliet KJ, Li J, Zhu T, Yip S, Suresh S (2003) Quantifying the early stages of plasticity through nanoscale experiments and simulations. Phys Rev B 67:104105
21. Lilleodden ET, Zimmerman JA, Foiles SM, Nix WD (2003) Atomistic simulations of elastic deformation and dislocation nucleation during nanoindentation. J Mech Phys Solids 51:901-920
22. Minor AM, Lilleodden ET, Stach EA, Morris JW (2004) Direct observations of incipient plasticity during nanoindentation of al. J Mater Res 19:176-182
23. Fago M, Hayes RL, Carter EA, Ortiz M (2004) Density-functional-theory-based local quasicontinuum method: Prediction of dislocation nucleation. Phys Rev B 70:100102(R)
24. Lund AC, Hodge AM, Schuh CA (2004) Incipient plasticity during nanoindentation at elevated temperatures. Appl Phys Lett 85:1362-1364
25. Constantinides G, Tweedie CA, Holbrook DM, Barragan P, Smith JF, Van Vliet KJ (2008) Quantifying deformation and energy dissipation of polymeric surfaces under localized impact. Mater Sci Eng A 489:403-412
26. Giannakopoulos AE, Suresh S (1999) Determination of elastoplastic properties by instrumented sharp indentation. Scr Mater 40:1191-1198
27. Ashby MF, Jones DRH (1998) Engineering materials 2, 2nd edn. Butterworth Heineman, Oxford
28. Cross R (1999) The bounce of a ball. Am J Phys 67:222-227
29. Tabor D (2000) The hardness of metals, 2nd edn. Oxford classical texts in the physical sciences. Oxford University Press, Oxford
30. Constantinides G, Silva ECCM, Blackman GS, Van Vliet KJ (2007) Dealing with imperfection: Quantifying potential length scale artefacts from nominally spherical indenter probes. Nanotechnology 18:305503
31. Andrews EW, Giannakopoulos AE, Plisson E, Suresh S (2002) Analysis of the impact of a sharp indenter. Int J Solids Struct 39:281-295
32. Cheng YT, Cheng CM (1998) Scaling approach to conical indentation in elastic-plastic solids with work hardening. J Appl Phys 84:1284-1291
33. Dao M, Chollacoop N, Van Vliet KJ, Venkatesh TA, Suresh S (2001) Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater 49:3899-3918
34. Ganneau FP, Constantinides G, Ulm F-J (2006) Dual-indentation technique for the assessment of strength properties of cohesive-frictional materials. Int J Solids Struct 43:1727-1745
35. Lima MM, Godoy C, Modenesi PJ, Avelar-Batista JC, Davison A, Matthews A (2004) Coating fracture toughness determined by Vickers indentation: An important parameter in cavitation erosion resistance of WC-Co thermally sprayed coatings. Surf Coat Technol 177-178:489-496
36. Marshall BM, Evans AG (1983) Measurement of dynamic hardness by controlled sharp-projectile impact. J Am Ceram Soc 66:580-585