A large area flexible array sensors using screen printing technology

IEEE/OSA Journal of Display Technology

Volumn 5, Issue 6, 2009, Pages 178-183

  Chang, Wen Yang ^a   Fang, Te Hua ^b   Lin, Heng Ju ^c   Shen, Yu Tang ^c   Lin, Yu Cheng ^a  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

^b NATIONAL FORMOSA UNIVERSITY   (Taiwan)

^c INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE   (Taiwan)

Author keywords

Array sensor; Bump; Flexible electronics; Multi scanning; Resistance; Screen printing; Tactile

Indexed keywords

ARRAY SENSOR; BUMP; FLEXIBLE ELECTRONICS; MULTI-SCANNING; RESISTANCE; TACTILE;

GELATION; MICROSTRUCTURE; POLYIMIDES; PRINTING PRESSES; SCANNING; SCREEN PRINTING;

SENSORS;

EID: 67349288051     PISSN: 1551319X     EISSN: None     Source Type: Journal    
DOI: 10.1109/JDT.2008.2004862     Document Type: Article

References (24)

1. S. Tsuyoshi, T. Makoto, N. Yoshiaki, N. Shintaro, K. Yusaku, S. Takayasu, and S. Takao, "A large-area wireless power-transmission sheet using printed organic transistors and plastic MEMS switches," Nature Mater., vol. 6, pp. 413-417, 2007. (Pubitemid 46876484)
2. W. S. Wong, R. Lujan, J. H. Daniel, and S. Limb, "Digital lithography for large-area electronics on flexible substrates," J. Non-Cryst. Solids, vol. 352, pp. 1981-1985, 2006. (Pubitemid 43949006)
3. R. A. Street, W. S. Wong, S. E. Ready, M. L. Chabinyc, A. C. Arias, S. Limb, A. Salleo, and R. Lujan, "Jet printing flexible displays," Materials Today, vol. 9, pp. 32-37, 2006.
4. P. Tehrani, J. Isaksson, W. Mammo, M. R. Andersson, N. D. Robinson, and M. Berggren, "Evaluation of active materials designed for use in printable electrochromic polymer displays," Thin Solid Films, vol. 515, pp. 2485-2492, 2006.
5. D. K. Yang, "Flexible bistable cholesteric reflective displays," J. Display Technol., vol. 2, no. 1, pp. 32-37, Mar. 2006. (Pubitemid 43282778)
6. W. S. Wong, R. Lujan, J. H. Daniel, and S. Limb, "Digital lithography for large-area electronics on flexible substrates," J. Non-Cryst. Solids, vol. 352, pp. 1981-1985, 2006. (Pubitemid 43949006)
7. S. H. Ko, J. Chung, H. Pan, C. P. Grigoropoulos, and D. Poulikakos, "Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing," Sensors Actuators A: Phys., vol. 134, pp. 161-168, 2007. (Pubitemid 46320213)
8. Z. Kattamis, I. C. Cheng, K. Long, B. Hekmatshoar, K. H. Cherenack, S. Wagner, J. C. Sturm, S. M. Venugopal, D. E. Loy, S. M. O'Rourke, and D. R. Allee, "Amorphous silicon thin-film transistor backplanes deposited at 200° C on clear plastic for lamination to electrophoretic displays," J. Display Technol., vol. 3, no. 3, pp. 304-308, Sep. 2007. (Pubitemid 47295212)
9. I. Manunza and A. Bonfiglio, "Pressure sensing using a completely flexible organic transistor," Biosensors Bioelectron., vol. 22, pp. 2775-2779, 2007. (Pubitemid 46759586)
10. S. Y. Xiao, L. F. Che, X. X. Li, and Y. L. Wang, "A novel fabrication process of MEMS devices on polyimide flexible substrates," Micro-electron. Eng., vol. 85, pp. 452-457, 2008.
11. Z. Tan, M. Shikida, M. Hirota, Y. Xing, K. Sato, T. Iwasaki, and Y. Iriye, "Characteristics of on-wall in-tube flexible thermal flow sensor under radially asymmetric flow condition," Sensors and Actuators A: Phys., vol. 138, pp. 87-96, 2007. (Pubitemid 47002265)
12. P. G. Su and C. S. Wang, "Novel flexible resistive-type humidity sensor," Sensors and Actuators B: Chemical, vol. 123, pp. 1071-1076, 2007. (Pubitemid 46678801)
13. N. C. Stoffel, M. Hsieh, E. J. Kramer, and W. Volksen, "Adhesion enhancement and lamination of polyimide films," IEEE Trans. Compon., Pkg. Manuf. Technol., vol. 19, no. 3, pp. 416-422, Sep. 1996. (Pubitemid 126797799)
14. F. Recart, I. Freire, L. Perez, R. L. Aurrekoetxea, J. C. Jimeno, and G. Bueno, "Screen printed boron emitters for solar cells," Solar Energy Materials and Solar Cells, vol. 91, pp. 897-902, 2007. (Pubitemid 46561262)
15. A. D. Taylor, E. Y. Kim, V. P. Humes, J. Kizuka, and L. T. Thompson, "Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells," J. Power Sources, vol. 171, pp. 101-106, 2007. (Pubitemid 47332976)
16. K. Tsutao, H. Masahiro, S. Masahiro, N. Keizo, and T. Hidekazu, "Effect of material internal pressure in curing process of SMC roll forming," J. Mater. Process. Technol., vol. 155, pp. 1577-1582, 2004.
17. H. Peter and M. G. James, "A screen-printed interdigitated back contact cell using a boron-source diffusion barrier," Solar Energy Mater. and Solar Cells, vol. 88, pp. 119-127, 2005.
18. B. Riviere, J. P. Viricelle, and C. Pijolat, "Development of tin oxide material by screen-printing technology for micro-machined gas sensors," Sensors Actuators B: Chem., vol. 93, pp. 531-537, 2003.
19. W. Zhu, K. Yao, and Z. Zhang, "Design and fabrication of a novel piezoelectric multilayer actuator by thick-film screen printing technology," Sensors and Actuators A: Phys., vol. 86, pp. 149-153, 2000.
20. [Online]. Available: http://www.jaycopanels.com
21. R. N. Aguilar and G. M. Meijer, "Fast interface electronics for a resistive touch-screen," IEEE Sensors J., vol. 2, pp. 1360-1363, 2002.
22. W. Y. Chang, T. H. Fang, and Y. C. Lin, "Characterization and fabrication of wireless flexible physiological monitor sensor," Sensors and Actuators A: Phys., vol. 143, pp. 196-203, 2007.
23. Y. Xu, F. Jiang, S. Newbern, A. Huang, C. M. Ho, and Y. C. Tai, "Flexible shear-stress sensor skin and its application to unmanned aerial vehicles," Sensors and Actuators A: Phys., vol. 105, pp. 321-329, 2003.
24. Y. S. Kim, "Microheater-integrated single gas sensor array chip fabricated on flexible polyimide substrate," Sensors and Actuators B: Chem., vol. 114, pp. 410-417, 2006. (Pubitemid 43276206)