Design and parameter estimation of hybrid magnetic bearings for blood pump applications

Mechanical Systems and Signal Processing

Volumn 23, Issue 7, 2009, Pages 2352-2382

  Lim, Tau Meng ^a   Zhang, Dongsheng ^a   Yang, Juanjuan ^a   Cheng, Shanbao ^a   Low, Sze Hsien ^a   Chua, Leok Poh ^a   Wu, Xiaowei ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

Blood pump; Magnetic bearings system; Magnetostatic; Parameter estimation

Indexed keywords

AXIAL DIRECTION; AXIAL FLOW BLOOD PUMPS; BLOOD PUMP; DAMPING COEFFICIENTS; DYNAMICS CHARACTERISTIC; ESTIMATION TECHNIQUES; FINITE ELEMENT; FREQUENCY-DEPENDENT; FREQUENCY-DOMAIN PARAMETERS; HIGH-SPEED; HYBRID MAGNETIC BEARING; MAXWELL 2D/3D; NORMAL OPERATING CONDITIONS; PROPORTIONAL INTEGRAL DERIVATIVE CONTROLLERS; RADIAL DIRECTION; RADIAL STIFFNESS; SENSORLESS; STATISTICAL ANALYSIS; STIFFNESS COEFFICIENTS; TEST RESULTS; TEST RIGS;

BEARINGS (STRUCTURAL); BLOOD; DC MOTORS; DYNAMICS; ESTIMATION; FREQUENCY DOMAIN ANALYSIS; MAGNETIC BEARINGS; MAGNETOSTATICS; METAL ANALYSIS; PARAMETER ESTIMATION; PERMANENT MAGNETS; PROPORTIONAL CONTROL SYSTEMS; PUMPS; STIFFNESS;

FREQUENCY ESTIMATION;

EID: 67349284388     PISSN: 08883270     EISSN: 10961216     Source Type: Journal    
DOI: 10.1016/j.ymssp.2009.03.012     Document Type: Article

References (26)

1. T.M. Lim, S.B. Cheng, D.S. Zhang, A compact magnetic bearing system for axial flow blood pump, IMECS 2007: 21-23 March, 2007, Hong Kong, 2007.
2. Lim T.M., and Cheng S.B. The development of a hybrid magnetic bearings system for axial flow blood pump. Advances in Industrial Engineering and Operations Research. Series: Lecture Notes Electrical Engineering. vol. 5 (2008), Springer, Berlin 391-399
3. Lim T.M., and Zhang D.S. Development of Lorentz force type self-bearing motor for an alternative axial flow blood pump design. Artificial Organs 30 (2006) 347-353
4. Hoshi H., Asama J., Shinshi T., Takatani S., Ohuchi K., Nakamura M., Mizuno T., Arai H., Shimokohbe A., and Takatani S. Disposable magnetically levitated centrifugal blood pump: design and in vitro performance. Artificial Organs 29 (2005) 520-526
5. Loree H.M., Bourque K., Gernes D.B., Richardson J.S., Poirier V.L., Barletta N., Fleischli A., Foiera G., Gempp T.M., Schoeb R., Litwak K.N., Akimoto T., Kameneva M., Watach M.J., and Litwak P. The HeartMate Shch{cyrillic}: design and in vivo studies of a maglev centrifugal left ventricular assist device. Artificial Organs 25 (2001) 386-391
6. Asama J., Shinshi T., Hoshi H., Takatani S., and Shimokohbe A. A new design for a compact centrifugal blood pump with a magnetically levitated rotor. Journal of ASAIO 50 (2004) 550-556
7. Allaire P.E., Hilton E., Baloh M., et al. Performance of a continuous flow ventricular assist device: magnetic bearings design, construction, and testing. Artificial Organs 22 (1998) 475-480
8. Hoshi H., Shinshi T., and Takatani S. Third-generation blood pumps with mechanical noncontact magnetic bearings. Artificial Organs 30 (2006) 324-338
9. Baloh M.J., Allaire P.E., Hilton E.F., Wei N., Olsen O.B., Bearnson G.B., and Khanwikar P.S. Characterization of a magnetic bearing system and fluid properties for a continuous flow ventricular assist device. Artificial Organs 23 (1999) 792-796
10. Asama J., Shinshi T., Hoshi H., Takatani S., and Shimokohbe A. Dynamic characteristics of a magnetically levitated impeller in a centrifugal blood pump. Artificial Organs 31 (2007) 301-311
11. Chung M.K.H., Zhang N., Tansley G.D., and Qian Y. Experimental determination of dynamic characteristics of the VentrAssist implantable rotary blood pump. Artificial Organs 28 (2004) 1089-1094
12. T.M. Lim, S.B. Cheng, Parameter estimation of one-axis magnetically suspended system with a digital PID controller, in: Proceedings of First International Conference on Sensing Technology, New Zealand, 2005, pp. 419-424.
13. Y. Aoyama, Y. Okazaki, Active magnetic bearing for spindle, in: Proceedings of Fourth International Workshop on Rare Earth Cobalt Permanent Magnets and Their Applications, Japan, 1979, pp. 169-176.
14. Matsumura F., Tanaka Y., Kido M., and Akiyama Y. Composition of a magnetic-bearing system for horizontal shaft and its experimental results. Electrical Engineering in Japan 103 (1983) 121-128
15. Williams R.D., Keith F.J., and Allaire P.E. Digital control of active magnetic bearings. IEEE Transactions on Industrial Electronics 37 (1990) 19-27
16. Lim T.M., and Zhang D.S. Control of Lorentz force-type self-bearing motors with hybrid PID and robust model reference adaptive control scheme. Mechatronics 18 (2008)
17. Lim T.M., and Cheng S.B. Parameter estimation and statistical analysis on frequency-dependent active control forces. Mechanical Systems and Signal Processing 21 (2007) 2112-2124
18. Schroeder M.R. Synthesis of low-peak-factor signals and binary sequences with low auto correlation. IEEE Transactions on Information and Theory (1970) 85-89
19. Ansoft Maxwell 3D Field Simulator v11 User's guide: ANSOFT Corporation
20. Getting Started: A 2D Magnetostatic Problem: ANSOFT Corporation
21. T.M. Lim, D.S. Zhang, Numerical analysis of blood trauma in an enclosed-impeller axial flow pump, 13th Congress of the ISRBP, September 2005, Tokyo, Japan, 2005.
22. Chua L.P., Su B.Y., Lim T.M., and Zhou T.M. Numerical simulation of an axial blood pump. Artificial Organs 31 (2007) 560-570
23. Gujarati D. Essential of Econometrics (1992), McGraw-Hill International Editions
24. Burrows C.R., Kucuk N.C., Sahinkaya M.N., and Stanway R. Linearised squeeze film dynamics: model structure and the interpretation of experimentally derived parameters. Proceedings of the Institution of Mechanical Engineers Part C 204 (1990) 263-272
25. T.M. Lim, G.B. Chai, Validating the dynamic coefficients of bearing pedestals in a multi-mode rotor-bearing system, Proceedings of the Institution of Mechanical Engineers Part C 223 (2009), doi:10.1243/09544062JMES1161.
26. Schweitzer G., Traxler A., and Bleuler H. Active Magnetic Bearings (1994), Verlag der Fachvereine