Extension of R-K constitutive relation to phase transformation phenomena

Materials and Design

Volumn 30, Issue 7, 2009, Pages 2513-2520

  Rodriguez Martinez J A ^a   Rusinek, A ^b   Klepaczko, J R ^b   Pecherski, R B ^c  

^a UNIVERSIDAD CARLOS III DE MADRID   (Spain)

^b UNIVERSITÉ DE LORRAINE   (France)

^c INSTITUTE OF FUNDAMENTAL TECHNOLOGICAL RESEARCH   (Poland)

Author keywords

Austenitic steel; Phase transformation; RK model

Indexed keywords

ANALYTICAL PREDICTIONS; COMPUTATIONAL TIME; CONSTITUTIVE MODELING; CONSTITUTIVE RELATIONS; EXPERIMENTAL OBSERVATIONS; KEY POINTS; MACROSCOPIC SCALE; MATERIAL CONSTANTS; PHASE TRANSFORMATION; PHASE TRANSFORMATION PROCESS; PHENOMENOLOGICAL APPROACHES; QUASI-STATIC LOADINGS; RK MODEL; STRESS COMPONENTS; TEMPERATURE EFFECTS; TRIP STEELS;

AUSTENITE; AUSTENITIC STEEL; AUSTENITIC TRANSFORMATIONS; MODELS; STRAIN HARDENING;

STRAIN RATE;

EID: 67349130210     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2008.09.043     Document Type: Article

References (46)

1. Papatriantafillou I., Agoras M., Aravas N., and Haidemenopoulos G. Constitutive modeling and finite element methods for TRIP steels. Comput Methods Appl Mech Eng 195 (2006) 5094-5114
2. Lebedev A.A., and Kosarchuk V. Influence of phase transformations on the mechanical properties of austenitic stainless steels. Int J Plasticity 16 (2000) 749-767
3. Bouaziz O., and Guelton N. Modelling of TWIP effect on work-hardening. Mater Sci Eng A 319-321 (2001) 246-249
4. Nemat-Nasser S., Guo W.G., and Kihl D.P. Thermo mechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures. J Mech Phys Solids 49 (2001) 1823-1846
5. Abed F.H., and Voyiadjis G.Z. Plastic deformation modelling of AL-6XN stainless steel at low and high strain rates and temperatures using a combination of bcc and fcc mechanisms of metals. Int J Plasticity 21 (2005) 1618-1639
6. Guo W.G., and Nemat-Nasser S. Flow stress of Nitronic-50 stainless steel over a wide range of strain rates and temperatures. Mech Mater 38 (2006) 1090-1103
7. Bouaziz O., Allain S., and Scott C. Effect of grain and twin boundaries on the hardening mechanisms of twinning induced plasticity steels. Scripta Mater 58 (2008) 484-487
8. Larour P., Rusinek A., Klepaczko J.R., and Beck W. Effects of strain rate and identification of material constants for three automotive steels. Steel Res Int 78 (2007) 348-358
9. Olson G.B., and Cohen M. Kinematics of strain-induced martensitic nucleation. Metall Trans A 6 (1975) 791-795
10. Stringfellow R.G., Parks D.M., and Olson G.B. A constitutive model for transformation plasticity accompanying strain-induced martensitic transformation in meta-stable austenitic steels. Acta Metall 40 (1992) 1703-1716
11. Tomita Y., and Iwamoto T. Constitutive modelling of TRIP steel and its application to the improvement of mechanical properties. Int J Mech Sci 37 (1995) 1295-1305
12. Iwamoto T., Tsuta T., and Tomita Y. Investigation on deformation mode dependence of strain-induced martensitic transformation in TRIP steels and modelling of transformation kinetics. Int J Mech Sci 40 (1998) 173-182
13. Iwamoto T., and Tsuta T. Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels. Int J Plasticity 16 (2000) 791-804
14. Taleb L., and Petit S. New investigations on transformation induced plasticity and its interaction with classical plasticity. Int J Plasticity 22 (2006) 110-130
15. Meftah S., Barbe F., Taleb L., and Sidoroff F. Parametric numerical simulations of TRIP and its interaction with classical plasticity in martensitic transformation. Eur J Mech A Solids 26 (2007) 688-700
16. Huha H, Seok-Bong Kima SB, Songa JH, Lim JH. Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body. Int J Mech Sci. doi:10.1016/j.ijmecsci.2007.09.004.
17. Leblond J.B., Mottet G., and Devaux J.C. A theoretical and numerical approach to the plastic behaviour of steels during phase transformations-I. Derivation of general relations. J Mech Phys Solids 34 (1986) 395-409
18. Leblond J.B., Mottet G., and Devaux J.C. A theoretical and numerical approach to the plastic behaviour of steels during phase transformations-II. Study of classical plasticity for ideal-plastic phases. J Mech Phys Solids 34 (1986) 410-432
19. Fischer F.D. A micromechanical model for transformation plasticity in steels. Acta Metall Mater 38 (1990) 1535-1546
20. Fischer F.D. Transformation induced plasticity in triaxiality loaded steel specimens subjected to a martensitic transformation. Eur J Mech A/Solids 11 (1992) 233-244
21. Fischer F.D., Sun Q.P., and Tanaka K. Transformation-induced plasticity (TRIP). Appl Mech Rev 49 (1996) 317-364
22. Cherkaoui M., Berveiller M., and Sabar H. Micromechanical modelling of martensitic transformation induced plasticity (TRIP) in austenitic single crystals. Int J Plasticity 14 (1998) 597-626
23. Cherkaoui M., Berveiller M., and Lemoine X. Coupling between plasticity and martensitic phase transformation: overall behavior of polycrystalline TRIP steels. Int J Plasticity 16 (2000) 1215-1241
24. Delannay L., Jacques P., and Pardoen T. Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach. Int J Solids Struct 45 (2008) 1825-1843
25. Mahnken R, Schneidt A, Antretter T. Macro modelling and homogenization for transformation induced plasticity of a low-alloy steel. Int J Plasticity, in press. doi:10.1016/j.ijplas.2008.03.005.
26. Aravas N. On the numerical integration of a class of pressure-dependent plasticity models. Int J Numer Methods Eng 24 (1987) 1395-1416
27. Rusinek A., and Klepaczko J.R. Shear testing of sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress. Int J Plasticity 17 (2001) 87-115
28. Zaera R., and Fernández-Sáez J. An implicit consistent algorithm for the integration of thermoviscoplastic constitutive equations in adiabatic conditions and finite deformations. Int J Solids Struct 43 (2006) 1594-1612
29. Rusinek A., Zaera R., Klepaczko J.R., and Cheriguene R. Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel. Acta Mater 53 (2005) 5387-5400
30. Rusinek A., and Zaera R. Finite element simulation of steel ring fragmentation under radial expansion. Int J Impact Eng 34 (2007) 799-822
31. Rusinek A., Zaera R., and Klepaczko J.R. Constitutive relations in 3-D for a wide range of strain rates and temperatures - application to mild steels. Int J Solids Struct 44 (2007) 5611-5634
32. Rusinek A., Zaera R., Forquin P., and Klepaczko J.R. Effect of plastic deformation and boundary conditions combined with elastic wave propagation on the collapse site of a crash box. Thin-Walled Struct 46 (2008) 1143-1163
33. Rusinek A., Rodríguez-Martínez J.A., Zaera R., Klepaczko J.R., Arias A., and Sauvelet C. Experimental and numerical study on the perforation process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles. Int J Impact Eng (2008) 10.1016/j.ijimpeng.2008.09.00
34. Klepaczko JR, Rusinek A, Rodríguez-Martínez JA, Pe{ogonek}cherski RB, Arias A. Modelling of thermo-viscoplastic behaviour of DH-36 and Weldox 460-E structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations for impact problems. Mech Mater, submitted for publication.
35. Zaera R. Internal Report. Implementación numérica de modelos de comportamiento de materiales metálicos avanzados para diseño de sistemas de absorción de energía en choques. Department of Continuum Mechanics and Structural Analysis. University Carlos III of Madrid. Spanish Ministry of Education (Project DPI2005-06769), 2008.
36. Durrenberger L., Even D., Molinari A., and Rusinek A. Influence of the strain path on crash properties of a crash-box structure by experimental and numerical approaches. J Phys IV 134 (2006) 1287-1293
37. Rusinek A., and Klepaczko J.R. Experiments on heat generated during plastic deformation and stored energy for TRIP steels. Mater Design 30 (2009) 35-48
38. Klepaczko J.R. A general approach to rate sensitivity and constitutive modeling of FCC and BCC metals. Impact: effects of fast transient loadings (1998), A.A. Balkema, Rotterdam 3-35
39. Rusinek A., Rodriguez-Martinez J.A., Klepaczko J.R., and Pe{ogonek}cherski R.B. Analysis of thermo-visco-plastic behaviour of six high strength steels. J Mater Design 30 (2009) 1748-1761
40. Berbenni S., Favier V., Lemoine X., and Berveiller N. Micromechanical modelling of the elastic-viscoplastic behaviour of polycrystalline steels having different microstructures. Mater Sci Eng 372 (2004) 128-136
41. Pe{ogonek}cherski R.B. Macroscopic effect of micro-shear banding in plasticity of metals. Acta Mech 131 (1998) 203-224
42. Pe{ogonek}cherski R.B. Continuum mechanics description of plastic flow produced by micro-shear bands. Tech Mech 18 (1998) 107-115
43. Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of 7th international symposium on ballistics, 1983. p. 541-7.
44. Koistinen D.P., and Marburger R.E. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Mater 7 (1959) 59-60
45. Larour P., Verleysen P., and Bleck W. Influence of uniaxial, biaxial and plane strain pre-straining on the dynamic tensile properties of high strength sheet steels. J Phys IV 134 (2006) 1085-1090
46. Tomita Y., and Iwamoto T. Computational prediction of deformation behaviour of TRIP steels under cyclic loading. Int J Mech Sci 43 (2001) 2017-2034