Transformation-induced plasticity (TRIP)

Applied Mechanics Reviews

Volumn 49, Issue 6, 1996, Pages 317-364

  Fischer, F D ^a   Sun, Q P ^b   Tanaka, K ^c  

^a INSTITUTE OF MECHANICS   (Austria)

^b TSINGHUA UNIVERSITY   (China)

^c TOKYO METROPOLITAN UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CONTINUUM MECHANICS; MATHEMATICAL MODELS; PHASE TRANSITIONS; PLASTIC DEFORMATION; THERMOELASTICITY; YIELD STRESS;

TRANSFORMATION INDUCED PLASTICITY (TRIP);

PLASTICITY;

EID: 0030173768     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3101930     Document Type: Article

References (316)

1. Wassermann G (1937), Untersuchungen an einer Eisen-Nickel-Legierung iiber die Verformbarkeit wãhrend der a-/-UmwandIung, Arch Eisenhdttenwesen 10 (7) 321-325.
2. Zackay VF, Parker ER, Fahr D, and Busch R (1967), The enhancement of ductility in high-strength steels, Am Soc Met Trans 60 252-259.
3. Mitter W (1987), Umwandlungsplastizitât und ihre Berdck-sichtigung bei der Berechnung von Eigenspcmnungen, Materialkundlich-Technische Reihe 7, Gebr Borntraeger, Berlin, Stuttgart, Germany (in German).
4. Maugin GA (1992), The thermomechanics of plasticity and fracture, Cambridge Univ Press, Cambridge, UK.
5. Padmanabhan KA and Davies GJ (1980), Superplasticity, Springer-Verlag, Berlin.
6. Oelschlãgel D and Weiss V (1966), Superplasticity of steels during the ferrite austenite transformation, Am Soc Met Trans 59 143-154.
7. Levitas VI (1992), Thermomechanics of phase transformations and inelastic deformations in microinhomogeneous materials, Naukova Dumka, Kiev, Ukraine (in Russian).
8. Fischer FD, Berveiller M, Tanaka K, and Oberaigner ER (1994), Continuum mechanical aspects of phase transformations in solids, Arch Appl Mech 64 54-85.
9. Tamura I and Wayman CM (1992), Martensitic transformations and mechanical effects, in Martensite - A Tribute to Morris Cohen, GB Olson and WS Owen (eds), ASM International, Warrendale, USA, 227-242.
10. Wechsler MS, Lieberman DS, and Read T (1953), On the theory of the formation of martensite, Trans Am Inst Min (Metall) Eng 197 1503-1515.
11. Sun QP and Mai YW (1996), Constitutive Relations and Fracturing of Phase Transforming Solids, in preparation for Science Press New York Ltd.
12. Sun QP and Hwang KC (1994), Micromechanics constitutive description of thermoelastic martensitic transformation, in Advances in Applied Mechanics, JW Hutchinson and TY Wu (eds), Academic Press, New York, 31 249-298.
13. Garvie RC, Hannink RHJ, and Pascoe RT (1975), Ceramic steel, Nature 258 703-704.
14. McMeeking RM and Evans AG (1982), Mechanisms of transformation toughening in brittle materials, J Am Ceramic Soc 65 (5) 242-246.
15. Evans AG and Cannon RM (1986), Toughening of brittle solids by martensitic transformations, Acta metall 34 (5) 651-800.
16. Evans AG (1990), Perspective on the development of hightoughness ceramics, J Am Ceramic Soc 73 (2) 187-206.
17. Patel JR and Cohen M (1953), Criterion for the action of applied stress in the martensitic transformation, Acta metall 1 (Sept) 531-538.
18. Levitas VI (1995), The postulate of realizability: Formulation and applications to the post-bifurcation behaviour and phase transitions in elastoplastic materials - I, II, Int J Eng Sci 33 (7) 921-945, 947-971.
19. Sauveur A (1924), What is steel?, Trans Am Inst Min (Metall) Eng 70 3.
20. Sauveur A (1924), What is steel? - Another answer, Iron Age 113 (Feb21) 581-583.
21. Sauveur A (1926), The metallography and heat treatment of iron and steel, The Univ Press, Cambridge MA.
22. Scheil E and Thiele W (1937), Ãnderungen von mechanischen Spannungen bei der Austenit-Martensit-Umwandlung, Arch Eisenhdttenwesen 10 (10) 477-480.
23. Porter LF and Rosenthal PC (1959), Effect of applied tensile stress on phase transformation in steel, Acta metall 7 (Jul) 504-514.
24. De Jong M and Rathenau GW (1959), Mechanical properties of iron and some iron alloys while undergoing allotropic transformation, Acta metall 7 (Apr) 246-253.
25. Johnson RH and Greenwood GW (1962), Deformation of Uranium during alpha/beta cycles under small stresses and a quantitative interpretation of the mechanical weakness of metals undergoing phase transformations, Nature 195 (Jul) 138-139
26. Greenwood GW and Johnson RH (1965), The deformation of metals under small stresses during phase transformation, Proc Roy Soc A 283 403-422.
27. Petsche S and Stangler F (1971), Umwandlungsplastizitât (dynamische Superplastizitãt) bei Eisen, Z Metallkunde 62 601-605.
28. Petsche S and Stangler F (1971), Umwandlungsplastizitât (dynamische Superplastizitãt) bei Eisen-Kohlenstoff-Legierungen (0,011-1,52 Gew.-%C), Z Metallkunde 62 606-609
29. Marder AR (1984), Structure-property relationships in ferrous transformation products, in Phase Transformations in Ferrous Alloys, AR Marder and JJ Goldstein (eds), The Metallurgical Soc of Am Inst Min (Metall) Eng, Warrendale, USA, 11-41.
30. Anderson RG and Bishop JFW (1962), The effect of neutron irradiation and thermal cycling on permanent deformations in Uranium under load, in Uranium and Graphite, Inst of Metals, London, UK, 17-23.
31. Roberts AC and Cottrell AH (1956), Creep of alpha Uranium during irradiation with neutrons, Phil Mag 1 711-717
32. Gautier E (1985), Transformation perlitique et martensi-tique sous contrainte de traction dans les aciers, PhD Thesis, Inst Natl Polytechnique de Lorraine, Nancy, France.
33. Gautier E, Zhang XM, and Simon A (1989), Role of internal stress state on transformation induced plasticity and transformation mechanisms during the progress of stress induced phase transformation, in Int Con/on Residual Stresses - ICRS2, G Beck, S Denis, and A Simon (eds), Elsevier Appl Sci, London and New York, 777-783.
34. Gautier E, Simon A, and Beck G (1987), Plasticite des transformation durant la transformation perlitique d’un acier eutectoide, Acta metall 35 (6.) 1367-1375.
35. Liebaut Ch, Gautier E, and Simon A (1988), Etude rheologique d’un acier Fe - 0,2% C durant la transformation de phase, Me’m Sci Rev Metall 85 (10) 571-579.
36. Gautier E, Simon A, and Beck G (1986), Martensitic transformation kinetics during anisothermal creep and tensile tests, in Int Conf on Martensitic Transformations, The Japan Inst of Metals, Tokyo, Japan, 503-508.
37. Gautier E and Simon A (1988), Transformation plasticity mechanisms for martensitic transformation of ferrous alloys, in Int Conf on Phase Transformations’87, GW Lorimer (ed), The Inst of Metals, London, UK, 285-287.
38. Gautier E and Simon A (1989), Transformation plasticity and resulting microstructures for strain-induced martensitic transformation in Fe-Ni-C alloys, in The Martensitic Transformation in Science and Technology, E Hornbogen and M Jost (eds), DGM Informationsgesellschaft, Oberursel, Germany, 451-458.
39. Giusti J (1981), Constraintes et deformations residuelles d’origine thermique; application au soudage et a la trempe des acieres, PhD Thesis, Univ Paris VI, France.
40. Gigou D (1985), Plasticite de transformation cas de la transformation martensitique, MSc Thesis, Univ Paris XI -I.N.S.T.A, Orsay, France.
41. Desalos Y (1981), Comportement dilatometrique et mecanique de l’austenite metastable d’un acier A 553, IRSID Report # 95349401 MET44.
42. Shirasawa Y, Ikegami K, and Niitsu Y (1993), Experimental investigation of cyclic plastic deformation of stainless steel 304 at low temperature, Trans JSME 93 (10) 2427-2434 (in Japanese).
43. Sun QP, Hwang KC, and Yu SW (1991), A micromechanics constitutive model of transformation plasticity with shear and dilatation effects, J Mech Phys Solids 39 (4) 507-524.
44. Budiansky B, Hutchinson JW, and Lambropoulos JC (1983), Continuum theory of dilatant transformation toughening in ceramics, Int J Solids Struct 19 (3) 337-355.
45. Stam GThM (1991), Localization in ceramics with volume and shear transformations, Delft Univ of Tech, Mech Eng Lab Report 982.
46. Yan WY, Sun QP, and Hwang KC (1996), A generalized micromechanics constitutive theory of single crystal with thermoelastic martensitic transformation, submitted to Science in China (Series A) (in Chinese and English).
47. Landau LD and Lifshitz EM (1980), Statistical Physics, Pergamon Press, Oxford.
48. Falk F (1980), Model free energy, mechanics and thermodynamics of shape memory alloys, Acta metall 28 1773-1780
49. Falk F (1982), Landau theory and martensitic phase transitions, J de Physique IV, Colloque C4, supplement au J de Physique 43 (12) C4-3-C4-15
50. Falk F and Konopka P (1990), Three-dimensional Landau theory describing the martensitic phase transformation of shape memory alloys, J Phys Condens Matter 2 61-77.
51. Abeyaratne R (1993), Material instability and phase transitions in thermoelasticity, in Theoretical and Applied Mechanics 1992, SR Bodner, J Singer and A Solan (eds), Elsevier, Amsterdam, London, New York, Tokyo, 53-77.
52. Abeyaratne R and Knowles JK (1993), A continuum model of a thermoelastic solid capable of undergoing phase transitions, J Mech Phys Solids 41 541-571.
53. Sun QP (1993), MicrO-macro combined constitutive research on phase transforming solids, J Basic Sci and Eng 1(1) 19-27 (in Chinese).
54. Franitza S (1972), Zur Berechnung der Wárme- und Umwandlungsspannungen in langen Kreiszylindern, PhD Thesis, Tech Univ Braunschweig, Germany.
55. Wang Z and Inoue T (1985), Viscoplastic constitutive relation incorporating phase transformation - application to welding, Mat Sci Tech 1 (Oct) 899-903.
56. Fletcher AJ (1989), Thermal stress and strain generation in heat treatment, Elsevier Appl Sci, London and New York.
57. Inoue T, Nagaki S, Kishino T, and Monkawa M (1981), Description of transformation kinetics, heat conduction and elastic-plastic stress in the course of quenching and tempering of some steels, Ingenieur-Archiv 50 315-327.
58. Inoue T and Wang Z (1985), Coupling between stress, temperature and metallic structures during processes involving phase transformations, Mat Sci Tech 1 (Oct) 845-850.
59. Inoue T, Yamaguchi T, and Wang Z (1985), Stresses and phase transformations occuring in quenching of carburized steel gear wheel, Mat Sci Tech 1 (Oct) 872-876.
60. Inoue T (1987), Metallo-thermo-mechanical coupling, Berg-und Hüttenmânnische Monatshefte 132 (3) 63-71.
61. Inoue T, Wang Z, and Miyao K (1989), Quenching stress of carburized steel gear wheel, in Int Conf on Residual Stresses - ICRS2, G Beck, S Denis and A Simon (eds), Elsevier Appl Sci, London and New York, 606-611.
62. Inoue T, Wang, Z and Miyao K (1989), Thermal and phase transformation stresses in a carburized-quenched gear wheel, in Thirtysecond Japan Congress on Materials Research, Soc of Mat Sci, Kyoto, Japan, 21-26.
63. Inoue T, Ohmori T, Hanabusa T, and Fujiwara H (1994), Simulation and experiments of quenching process of the Japanese sword, in Int Conf on Residual Stresses - ICRS4, MR James (ed), Soc for Exp Mech, Bethel, USA, 970-976.
64. Leblond JB (1980), Simulation numerique du soudage -modelisation mathematique des transformations metallur-giques - etat d’avencement des travaux, Framatome Internal Report # TM/C DC/80.066, Paris, France.
65. Sjõstrõm S (1982), The calculation of quench stresses in steel, PhD Thesis, Linkõping Univ, Sweden.
66. Sjõstrõm S (1985), The calculation of phase transformations and residual stresses resulting from quenching of steel, in Numerical Methods in Thermal Problems, RW Lewis and K Morgan (eds), Pineridge Press, Swansea, UK, 1189-1202.
67. Denis S, Simon A and Beck G (1984), Stress/phase transformation interactions: Basic principles; modelization and their role in the calculation of internal stresses, in Int Symp on the Calculation of Internal Stresses in Heat Treatment of Metallic Materials, E Attebo and T Ericsson (eds), Linkõping Univ, Sweden, Vol I, 157-190.
68. Denis S, Gautier E, Simon A, and Beck G (1985), Stress-phase-transformation interactions - basic principles, modelling and calculation of internal stresses, Mat Sci Tech 1 (Oct) 805-814.
69. Denis S, Sjõstrõm S, and Simon A (1987), Coupled temperature, stress, phase transformation calculation model numerical illustration of the internal stresses evolution during cooling of an eutectoid carbon steel cylinder, Met Trans 18A (7) 1203-1212.
70. Habraken AM, Bourdouxhe M, Denis S, and Simon A (1989), Generating of internal and residual stresses in steel workpieces during cooling, in Int Conf on Residual Stresses - ICRS2, G Beck, S Denis, and A Simon (eds), Elsevier Appl Sci, London and New York, 593-599.
71. Boufoussi M, Denis S, Chevrier JCh, and Simon A (1992), Prediction of thermal phase transformation and stress evolutions during laser hardening of steel plates, in Eur Conf on Laser Treatment of Metals - ECLAT‘92, BL Mordike (ed), DGM Informationsgesellschaft, Oberursel, Germany, 635-642.
72. Oddy AS, Goldak JA, and McDill JMJ (1992), Transformation plasticity and residual stresses in single-pass repair welds, J Pressure Vessel Piping 114 (Feb) 33-38.
73. Oddy AS, McDill JMJ, and Goldak JA (1990), Consistent strain fields in 3D finite elements analysis of welds, J Pressure Vessel Piping 112 (Aug) 309-311.
74. Oddy AS, Goldak JA and McDill JMJ (1990), Numerical analysis of transformation plasticity in 3D finite element analysis of welds, Eur J Mech A/Solids 9 (3) 253-263.
75. Besserdich G, Scholtes B, Miiller H, and Macherauch E (1994), Consequences of transformation plasticity on the development of residual stresses and distorsions during martensitic hardening of SAE 4140 steel cylinders, Steel Res 65 (1) 41-46.
76. Abrassart F (1972), Influence des transformations martensitiques sur les proprietes mecaniques des alliages du systeme Fe-Ni-Cr-C, PhD Thesis, Univ de Nancy I, Nancy, France.
77. Tanaka S and Sato Y (1985), A mechanical view of transformation-induced plasticity, Ingenieur-Archiv 55 147-155.
78. Leblond JB, Devaux J, and Devaux JC (1989), Mathematical modelling of transformation plasticity in steels -I: case of ideal-plastic phases, Int J Plasticity 5 551-572.
79. Fischer FD (1990), A micromechanical model for transformation plasticity in steels, Acta metall mat 38 (8) 1535-1546
80. Denis S, Gautier E, and Simon A (1989), Modelling of the mechanical behaviour of steels during phase transformation: a review, in Int Conf on Residual Stresses -ICRS2, G Beck, S Denis, and A Simon (eds), Elsevier Appl Sci, London and New York, 393-398.
81. Daves W (1994), Mikro- und makromechanische Simulation des Deformationsverhaltens von Stãhlen unter Beriick-sichtigung von Umwandlungs- und Diffusionsvorgángen, in Fortschritt-Berichte VDI, Reihe 18: Mechanik/Bruch-mechanik, Nr 141, VDI-Verlag, Düsseldorf, Germany.
82. Levitas VI and Stein E (1995), Thermodynamical model of martensite phase transitions, ZAMM 75 S199-S200.
83. Videau J-Chr, Cailletaud G, and Pineau A (1994), Modelisation des effets mecaniques des transformations de phases pour le calcul des structures, J de Physique IV, Colloque C3, supplement au J de Physique 111 4 (Feb) C3-227 - C3-232.
84. Rammerstorfer FG, Mitter W, Fischer FD, Steiner H, and Schatzmayr G (1979), Zur Bestimmung der Eigen-spannungen in Bauteilen bei Wãrmebehandlung mit Phasenumwandlung, in Berichtsband der Fachtagung Eigenspannungen, DGM Informationsgesellschaft, Oberursel, Germany, 181-207.
85. Rammerstorfer FG, Jaquemar Ch, Fischer FD, and Wiesinger H (1979), Temperature fields, solidification progress and stress development in the strand during a continous casting process, in Numerical Methods in Thermal Problems, RW Lewis and K Morgan (eds), Pineridge Press, Swansea, UK, 712-722.
86. Rammerstorfer FG, Fischer FD, and Jaquemar Ch (1979), Nonlinear analysis of the states of stress and deformation during a metal casting progress, MIT-Report 82448-9, K-J Bathe (ed), MIT, Boston MA, 165-178.
87. Rammerstorfer FG, Fischer FD, Mitter W, Bathe K-J, and Snyder MD (1981), On thermo-elastic-plastic analysis of heat treatment processes inducing creep and phase change, Comput Struct 13 771-779.
88. Fischer FD, Griindler O, Mitter W, Rammerstorfer FG, and Till ET (1981), The influence of creep and transformation plasticity in the analysis of stresses due to heat treatment, in Numerical Methods in Thermal Problems, RW Lewis, K Morgan, and BA Schrefler (eds), Pineridge Press, Swansea, UK, 364-376.
89. Rammerstorfer FG, Fischer FD, Till ET, Mitter W, and Griindler O (1983), The influence of creep and transformation plasticity in the analysis of stresses due to heat treatment, in Numerical Methods in Heat Transfer, Vol 2, RW Lewis, K Morgan and BA Schrefler (eds), J Wiley and Sons, New York, 447-460.
90. Murakami S and Mizuno M (1991), Mechanical modeling of irradiation creep and its application to the analysis of creep crack growth, in Creep in Structures, M Zyczkowski (ed), Springer-Verlag, Berlin, 237-252.
91. Leblond JB, Mottet G, and Devaux JC (1986), A theoretical and numerical approach to the plastic behaviour of steels during phase transformations - I. Derivation of general relations, J Mech Phys Solids 34 (4) 395-410.
92. Leblond JB, Mottet G, and Devaux JC (1986), A theoretical and numerical approach to the plastic behaviour of steels during phase transformations - II. Study of classical plasticity for ideal-plastic phases, J Mech Phys Solids 34 (4) 411-432.
93. Leblond JB (1989), Mathematical modelling of transformation plasticity in steels - II: Coupling with strain hardening phenomena, Int J Plasticity 5 573-591.
94. Denis S, Gautier E, Sjõstrõm S, and Simon A (1987), Influence of stresses on the kinetics of pearlite transformation during continuos cooling, Acta metall 35 (7) 1621-1632.
95. Leblond JB and Devaux J (1989), Interaction between transformation plasticity and strain hardening phenomena in steels, in Int Conf on Residual Stresses - ICRS2, G Beck, S Denis, and A Simon (eds), Elsevier AppI Sci, London and New York, 410-415.
96. Giusti J and Radenkovic D (1983), A model of thermomechanical behaviour of metals with phase changes, Mech Res Commun 10 (3) 163-169.
97. Raniecki B and Bruhns O (1991), Thermodynamical reference model of metallo-thermo-mechanics, in Int Conf on Mechanical Behaviour of Materials - ICM VI, M Jono and T Inoue (eds), Pergamon Press, Oxford, 1 87-92.
98. Magee CL (1966), Transformation kinetics, micro-plasticity and aging of martensite in Fe-31Ni, PhD Thesis, Carnegie Inst of Tech, College of Eng and Sci, Pittsburgh PA.
99. Stringfellow RG, Parks DM, and Olson GB (1992), A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels, Acta metaU mat 40 (7) 1703-1716.
100. Marketz F and Fischer FD (1995), A mesoscale-study on the thermodynamic effect of stress on martensititc transformation, Met Trans 26A 267-278.
101. Fischer FD, Pichler A, and Mitter W (1989), A micromechanical explanation of transformation induced plasticity (TRIP), in The Martensitic Transformation in Science and Technology, E Hornbogen and M Jost (eds), DGM Informationsgesellschaft, Oberursel, Germany, 487-497.
102. Fischer FD (1992), Transformation plasticity in steels, an overview, in Residual Stresses III Science and Technology, H Fujiwara, T Abe, and K Tanaka (eds), Elsevier Appl Sci, London and New York, 169-176.
103. Fischer FD (1992), Transformation induced plasticity in triaxially loaded steel specimens subjected to a martensitic transformation, Eur J Mech A/Solids 11 (2) 233-244.
104. Fischer FD (1992), Transformation plasticity under a triaxial stress state, in Mechanical Effects of Welding, L Karlsson, L Lindgren, and M Jonsson (eds), Springer-Verlag, Berlin, 39-48.
105. Sattler HP and Wassermann G (1972), Transformation plasticity during martensitic transformation of iron with 30% Ni, J Less-Common Met 28 119-140.
106. Fischer FD and Schlõgl S (1995), The influence of material anisotropy on transformation induced plasticity in steel subject to martensitic transformation, Mech Mat 21 (1)1-23.
107. Daves W and Fischer FD (1993), Numerical simulation of the development of residual stresses during nitriding, in Residual Stresses III, V Hauk (ed), DGM Informationsgesellschaft, Oberursel, Germany, 957-964.
108. Daves W and Fischer FD (1994), Numerical simulation of the development of residual stresses in nitrided samples due to the nitrogen concentration profile and the growth of nitrides, in Int Conf on Residual Stresses - ICRS4, MR James (ed), Soc for Exp Mech, Bethel, USA, 525-531.
109. Sato E and Kuribayashi K (1993), A model of internal stress superplasticity based on continuum micromechanics, Acta metall mat 41 (6) 1759-1767.
110. Mori T, Okabe M, and Mura T (1980), Diffusional relaxation around a second phase particle, Acta metall 28 319-325.
111. Srolovitz DJ, Luton MJ, Petkovic-Luton R, Barnett DM, and Nix WD (1984), Diffusionally modified dislocation -particle elastic interactions, Acta metall 32 (7) 1079-1088.
112. Diani JM, Sabar H, and Berveiller M (1995), Micromechanical modelling of the transformation induced plasticity (TRIP) phenomenon in steels, Int J Eng Sci 33 (13) 1921-1934.
113. Kroner E (1990) Modified Green functions in the theory of heterogeneous and/or anisotropic linearly elastic media, in Micromechanics and Inhomogeneity, GJ Weng, M Taya, and H Abe (eds), Springer-Verlag, New York, 197-211.
114. Sun QP and Hwang KC (1993), Micromechanics modelling for the constitutive behavior of polycrystalline shape memory alloys, I: Derivation of general relations, J Mech Phys Solids 41 (1) 1-17.
115. Sun QP and Hwang KC (1993), Micromechanics modelling for the constitutive behavior of polycrystalline shape memory alloys, II: Study of the individual phenomena, J Mech Phys Solids 41 (1) 19-33.
116. Patoor E, Eberhardt A, and Berveiller M (1988), Thermomechanical behavior of shape memory alloys, Arch Mech 40 775-794.
117. Delaey L, Krishnan RV, Tas H, and Warlimont H (1974), Review: Thermoelasticity, pseudoelasticity and the memory effects associated with martensitic transformations, J Mat Sci 9 (9) 1521-1555.
118. Rice JR (1971), Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity, J Mech Phys Solids 19 433-455.
119. Mura T (1987), Micromechanics of defects in solids, Martinus Nijhoff, The Hague, The Netherlands.
120. Mori T and Tanaka K (1973), Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta metall 21 (5) 571-574.
121. Eshelby JD (1956), The continuum theory of lattice defects, in Solid State Physics, F Seitz and D Turnbull (eds), Academic Press, New York, 3 79-144.
122. Budiansky B and Truskinovsky L (1993), On the mechanics of stress-induced phase transformation in zirconia, J. Mech Phys Solids 41 (9) 1445-1459.
123. Funakubo H (ed) (1987), Shape Memory Alloys, Gordon and Breach Science Publishers, Precision Machinery and Robotics, 1, New York, London, Paris et al.
124. James RD (1986), Displacive phase transformations in solids, J Mech Phys Solids 34 359-394.
125. Duerig TW, Melton KN, Stóckel D, and Wayman CM (1990), Engineering aspects of shape memory alloys, Butter-worth-Heinemann, London, Boston, Singapore et al.
126. Tanaka K (1990), A phenomenological description on thermomechanical behavior of shape memory alloys, J Pressure Vessel Tech 112 158-163.
127. Sawada T, Tobushi H, Kimura K, Hattori T, Tanaka K, and Lin PH (1993), Stress-strain-temperature relationship associated with the R-phase transformation in TiNi shape memory alloy (influence of shape memory processing temperature), JSME Ser A 36 395-401.
128. Brinson LC (1993), One-dimensional constitutive behavior of shape memory alloys: Thermomechanical derivation with non-constant material functions and redefined martensite internal variable, J Intell Mat Sys Struct 4 229-242.
129. Miyazaki S and Otsuka K (1986), Deformation and transition behavior associated with the R-phase in Ti-Ni alloys, Met Trans 17A 53-63.
130. Miyazaki S and Wayman CM (1988), The R-phase transition and associated shape memory mechanism in TiNi single crystals, Acta metall 36 181-192.
131. Miyazaki S, Kimura S, and Otsuka K (1988), Shape-memory effect and pseudoelasticity associated with the R-phase transition in Ti-50.5 at.% Ni single crystals, Phil Mag A 57 467-478.
132. Tamura I (1982), Deformation-induced martensitic transformation and transformation-induced plasticity in steels, Metal Sci 16 245-253.
133. Miyazaki S and Otsuka K (1989), Development of shape memory alloys, Iron Steel Inst Japan Int 29 353-377.
134. Saburi T and Nenno S (1981), The shape memory effect and related phenomena, in Solid-Solid Phase Transformations, HI Aaronson, DE Laughlin, RF Sekerka, and CM Wayman (eds), AIME, New York, 1455-1479.
135. Wayman CM (1983), Phase transformations, nondiffusive, in Physical metallurgy, RW Cahn and P Haasen (eds), third, revised and enlarged edition, North-Holland Physics Publishing, Amsterdam.
136. Berveiller M, Patoor E, and Buisson M (1991), Thermomechanical constitutive equations for shape memory alloys, J de Physique IV, Colloque C4, supplement au J de Physique III 1 (Nov) C4-387 - C4-396.
137. Patoor E, Eberhardt A, and Berveiller M (1994), Micromechanical modelling of the shape memory behavior, in Mechanics of phase transformations and shape memory alloys, LC Brinson and B Moran (eds), AMD-Vol 189/PVP-Vol 292, ASME, 23-37.
138. Fischer FD and Tanaka K (1992), A micromechanical model for the kinetics of martensitic transformation, Int J Solids Struct 29 1723-1728.
139. Tanaka K, Oberaigner ER, and Fischer FD (1993), A continuum mechanical approach to the kinetics and deformation of alloys during martensitic transformation, in ICOMAT-92, CM Wayman and J Perkins (eds), Monterey Inst of Appl Studies, Carmel, USA, 419-424.
140. Falk F (1980), Wie hãngt die Freie Energie einer Memory-Legierung von der Verzerrung und der Temperatur ab?, ZAMM 60 T118-T120.
141. Falk F (1983), One-dimensional model of shape memory alloys, Arch Mech 35 63-84.
142. Falk F (1983), Ginzburg-Landau theory of static domain walls in shape-memory alloys, Z Physik B 51 177-185.
143. Friedman A and Sprekels J (1990), Steady states of austenitic-martensitic domains in the Ginzburg-Landau theory of shape memory alloys, Continuum Mech Thermodyn 2 199-213.
144. Burns JA and Spies RD (1994), A numerical study of parameter sensitivities in Landau-Ginzburg models of phase transitions in shape memory alloys, Intell Mat Sys Struct 5 321-332.
145. Kaczmarek J (1993), A thermodynamical model of solids undergoing martensitic phase transformations with shuffles, Arch Mech 45 167-181.
146. Müller I (1989), On the size of the hysteresis in pseudoelasticity, Continuum Mech Thermodyn 1 125-142.
147. Müller I and Xu HB (1991), On the pseudoelastic hysteresis, Acta metall 39 263-271.
148. Fu S, Huo Y, and Müller I (1993), Thermodynamics of pseudoelasticity - an analytical approach, Acta mech 99 119
149. Huo YZ and Müller I (1993), Nonequilibrium thermodynamics of pseudoelasticity, Continuum Mech Thermodyn 5 163-204.
150. Xu HB (1993), Experimented und theoretische Unter-suchungen des Last-Verformung-Verhaltens von CuZnAl-und CuAlNi-Einkristallen, Z Metallkunde 84 472-478.
151. Fedelich B and Zanzotto G (1991), One-dimensional quasistatic nonisothermal evolution of shape-memory material inside the hysteresis loop, Continuum Mech Thermodyn 3 251-276.
152. Brokate M and Theel J (1993), Some numerical simulations of pseudoelastic hysteresis in shape memory alloys, Continuum Mech Thermodyn 5 265-280.
153. Raniecki B, Lexcellent Ch, and Tanaka K (1992), Thermodynamic model of pseudoelastic behaviour of shape memory alloys, Arch Mech 44 261-284.
154. Lexcellent Ch and Vacher P (1993), Thermomechanical behavior of polycrystalline shape memory alloys Cu-Zn-Al, Arch Mech 45 135-155.
155. Lexcellent C, Rogueda C, and Bourbon O (1994), Parameter determination for thermodynamical models of the pseudoelastic behaviour of shape memory alloy by resistivity measurements and infrared thermography, Continuum Mech Thermodyn 6 273-290.
156. Raniecki B and Lexcellent Ch (1994), R-models of pseudoelasticity and their specification for some shape memory solids, Eur J Mech A/Solids 13 21-50.
157. Ziolkowski A (1993), Theoretical analysis of efficiency of shape memory alloy heat engines (based on constitutive models of pseudoelasticity), Mech Mat 16 365-377.
158. Abeyaratne R and Knowles JK (1988), On the dissipative response due to discontinuous strains in bar of unstable elastic material, Int J Solids Struct 24 1021-1044.
159. Tanaka K (1986), A thermomechanical sketch of shape memory effect: One-dimensional tensile behavior, Res Mech 18 251-263.
160. Tanaka K, Kobayashi S, and Sato Y (1986), Thermomechanics of transformation pseudoelasticity and shape memory effect in alloys, Int J Plasticity 2 59-72.
161. Bowen RM (1976), Theory of mixture, in Continuum Physics, AC Eringen (ed), Academic Press, New York, Vol 111, Part I 1-127.
162. Koistinen DP and Marburger RE (1959), A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels, Acta metall 7 59-60.
163. Tobushi H, Iwanaga H, Tanaka K, Hori T, and Sawada T (1991), Deformation behavior of TiNi shape memory alloy subjected to variable stress and temperature, Continuum Mech Thermodyn 3 Part I 79-93.
164. Tobushi H, Iwanaga H, Tanaka K, Hori T, and Sawada T (1992), Stress-strain-temperature relationship of TiNi shape memory alloy suitable for thermomechanical cycling, JSME Ser I 35 271-277.
165. Tanaka K, Hayashi T, Itoh T, and Tobushi H (1992), Analysis of thermomechanical behavior of shape memory alloys, Mech Mat 13 207-215
166. Tanaka K, Nishimura F, Hayashi T, Tobushi H, and Lexcellent Ch (1995), Phenomenological analysis on subloops and cyclic behavior in shape memory alloys under mechanical and/or thermal loads, Mech Mat 19 281-292.
167. Liang C and Rogers CA (1990), One-dimensional thermomechanical constitutive relations for shape memory materials, Intell Mat Sys Struct 1 207-234.
168. Zhang XD, Rogers CA, and Liang C (1992), Modelling of the two-way shape memory effect, Phil Mag A 65 1199-1215.
169. Liang C and Rogers CA (1992), A multi-dimensional constitutive model for shape memory alloys, J.Eng Math 26 429-443.
170. Brinson LC and Lammering R (1993), Finite element analysis of the behavior of shape memory alloys and their applications, Int J Solids Struct 30 3261-3280.
171. Boyd JG and Lagoudas DC (1994), A constitutive model for simultaneous transformation and reorientation in shape memory alloys, in Mechanics of phase transformations and shape memory alloys, LC Brinson and B Moran (eds), AMD-Vol 189/PVP-Vol 292, ASME, 159-177.
172. Brandon D and Rogers RC (1992), Constitutive laws for pseudo-elastic materials, Intell Mat Syst Struct 3 255-267.
173. Tanaka K, Oberaigner ER, and Fischer FD (1994), A unified theory on thermomechanical mesoscopic behavior of alloy materials in the process of martensitic transformation, in Mechanics of phase transformations and shape memory alloys, LC Brinson and B Moran (eds), AMD-Vol 189/PVP-Vol 292, ASME, 151-157.
174. Tanaka K, Hayashi T, Fischer FD, and Buchmayr B (1994), Transformation lines in an Fe-Cr-Ni-Mn-Si polycrystalline shape memory alloy, Z Metallkunde 85 122-126.
175. Tanaka K, Nishimura F, and Tobushi H (1995), Transformation start lines in TiNi and Fe-based shape memory alloys after incomplete transformations induced by mechanical and/or thermal loads, Mech Mat 19 271-280.
176. Wang ZG and Hwang KC (1993), Study of constitutive relations for pseudoelasticity and shape memory behavior, Acta Mech Sinica 9 44-52.
177. Falk F (1989), Pseudoelastic stress-strain curves of polycrystalline shape memory alloys calculated from single crystal data, Int J Eng Sci 27 277-284.
178. James RD and Kinderlehrer D (1989), Theory of diffusion-less phase transformations, in Partial differential equations and continuum models of phase transitions, M Rascle, D Serre, and M Stemrod (eds), Springer-Verlag, Berlin, 51-84.
179. Wayman CM (1964), Introduction to the crystallography of martensitic transformations, Macmillan, New York.
180. Taya M and Arsenault RJ (1989), Metal matrix composites: Thermomechanical behavior, Pergamon Press, New York.
181. Clyne TW and Withers PJ (1993), An introduction to metal matrix composites, Cambridge Univ Press, Cambridge.
182. Nemat-Nasser S and Hori M (1993), Micromechanics: Overall properties of heterogeneous materials, Elsevier Scientific Publishers BV (North-Holiand), Amsterdam.
183. Boyd JG and Lagoudas DC (1994), Thermomechanical response of shape memory composites, J. Intell Mat Syst Struct 5 333-346.
184. Tanaka K, Hasegawa D, Bòhm HJ, and Fischer FD (1995), Overall thermomechanical behavior of shape memory alloys; a micromechanical approach based on mean field theory, Mat Sci Res Int 1 23-30.
185. Marketz F and Fischer FD (1993), A micromechanical approach to transformation induced plasticity (TRIP) for martensitic transformation, in MECAMAT’93: Seminar: Micromechanics of Materials, Collection de la Direction des Etudes et Recherches d’ Electricite France, Editions Eyrolles, Paris, 258-267.
186. Lagoudas DC, Boyd JG, and Bo Z (1994), Micromechanics of active composites with SMA fibers, J Eng Mat Tech 116 337-347.
187. Sun G and Sun CT (1993), One-dimensional constitutive relation for shape-memory alloy-reinforced composite lamina, J Mat Sci 28 6323-6328.
188. Furuya Y, Sasaki A, and Taya M (1993), Enhanced mechanical properties of TiNi shape memory fiber/Al matrix composite, Japan Inst Met Mat Trans 34 224-227.
189. Yamada Y, Taya M, and Watanabe R (1993), Strengthening of metal matrix composite by shape memory effect, Japan Inst Met Mat Trans 34 245-260.
190. Baz A, Iman K, and McCoy J (1990), The dynamics of helical shape memory actuators, J. Intell Mat Syst Struct 1 105-133
191. Baz A, Iman K, and McCoy J (1990), Active vibration control of flexible beams using shape memory actuators, J. Sound Vib 140 437-456.
192. Bruno OP, Leo PH, and Shield TW (1993), Pseudoelasticity, phase boundary dynamics and heat transfer in shape-memory wires, in MECAMAT’93: Seminar. Micromechanics of Materials, Collection de la Direction des Etudes et Recherches d’ Electricite France, Editions Eyrolles, Paris, 83-93.
193. Leo PH, Shield TW, and Bruno OP (1993), Transient heat transfer effects on the pseudoelastic behavior of shape-memory wires, Acta metall mat 41 2477-2485.
194. Abeyaratne R, Kim S-J, and Knowles JK (1994), Continuum modeling of shape-memory alloys, in Mechanics of phase transformations and shape memory alloys, LC Brinson and B Moran (eds), AMD-Vol 189/PVP-Vol 292, ASME, 5969.
195. Ericksen JL (1975), Equilibrium of bars, J Elasticity 5 191-201.
196. Li JC and Ansell GS (1983), The effect of thermal cycling on the thermoelastic martensitic transformation in a Cu-Zn-Al alloy, Met Trans 14A 1293-1297.
197. Perkins J and Muesing WE (1983), Martensitic transformation cycling effects in Cu-Zn-AJ shape memory alloys, Met Trans 14A 33-36.
198. Paskal YI and Monasevich LA (1981), Hysteresis features of the martensitic transformation of titanium nicklide, Phys Met Metatlogr 53 95-99.
199. Segui C, Cesari E, and Pons J (1992), Phenomenological modelling of the hysteresis loop in thermoelastic martensitic transformations, Japan Inst Met Mat Trans 33 650-658.
200. Amengual A, Cesari E, and Segui C (1993), Subloop behaviour in the thermoelastic martensitic transformations, in ICOMAT-92, CM Wayman and J Perkins (eds), Monterey Institute for Advanced Studies, Carmel, USA, 377-382.
201. Wei ZG and Yang DZ (1988), On the hysteresis loops and characteristic temperatures of thermoelastic martensitic transformations, Scripta metall 22 1245-1249.
202. Robinson JS and McCormick PG (1990), Shape memory in an Fe-Mn-Si alloy, in Martensitic Transformations I and II-ICOMAT-89, BC Muddle (ed), Mat Sci Forum, Trans Tech Publications, Brookfield, USA, 56-58 649-654.
203. Tan SM and Yang SW (1992), Effect of pre-strain on shape memory behavior of an Fe-Mn-Si-Cr-Ni-Co alloy, Scripta metall mat 27 229-232.
204. Tanaka K, Nishimura F, and Tobushi H (1995), Effect of prior transformation on transformation start stress and temperature in an Fe-based shape memory alloy, Z Metallkunde 86 211-215.
205. Wilmanski K (1993), Symmetric model of stress-strain hysteresis loops in shape memory alloys, Int J Eng Sci 31 1121-1138.
206. Levitas VI (1994), Thermomechanical description of pseudoelasticity - the threshold-type dissipative force with discrete memory, Mech Res Commun 21 273-280.
207. J Lü L, Aernoudt E, Wollants P, Van Humbeeck J, and Delaey L (1990), Simulation of transformation hysteresis, Z Metallkunde 81 613-622.
208. Miyazaki S, Imai T, Igo Y, and Otsuka K (1986), Effect of cyclic deformation in the pseudoelasticity characteristics of TiNi alloys, Met Trans 17A 115-120.
209. Lin PH, Tobushi H, Ikai A, and Tanaka K (1994), Deformation properties associated with the martensitic and R-phase transformations in TiNi shape memory alloy, in Shape Memory Materials 94, YY Chu and HL Tu (eds), Int Academic Publishers, Beijing, 530-534.
210. Leclercq S, Lexcellent Ch, Tobushi H, and Lin PH (1994), Thermodynamical modelling of recovery stress associated with R-phase transformation in TiNi shape memory alloys, Japan Inst Met Mat Trans 35 325-331.
211. Heidug W and Lehner FK (1985), Thermodynamics of coherent phase transformations in nonhydrostatically stressed solids, Pure Appl Geophys 123 91-98.
212. Abeyaratne R and Knowles JK (1990), On the driving traction acting on a surface of strain discontinuity in a continuum, J Mech Phys Solids 38 345-360.
213. Raniecki B and Tanaka K (1994), On the thermodynamic driving force for coherent phase transformations, Int J Eng Sci 32 1845-1858.
214. Abeyaratne R and Knowles JK (1991), Kinetic relations and the propagation of phase boundaries in solids, Arch Rational Mech Anal 114 119-154.
215. Fried E (1992), Stability of a two-phase process involving a planar phase boundary in a thermoelastic solid, Continuum Mech Thermodyn 4 59-79.
216. Liu I-S (1992), On interface equilibrium and inclusion problems, Continuum Mech Thermodyn 4 177-186.
217. Miyazaki S, Imai T, Otsuka K, and Suzuki Y (1981), Liiders-like deformation observed in the transformation pseudoelasticity of a Ti-Ni alloy, Scripta metall 15 853-856.
218. Eucken S and Duerig TW (1989), The effects of pseudoelastic prestraining on the tensile behaviour and two-way shape memory effect in aged NiTi, Acta metall 37 2245-2252.
219. Airoldi G and Riva G (1990), Step-wise stimulated marten-sitic transformations, Key Eng Mat 48 5-16.
220. Lin PH, Tobushi H, Tanaka K, Hattori T, and Makita M (1994), Pseudoelastic behaviour of TiNi shape memory alloy subjected to strain variations, J Intell Mat Sys Struct 5 694-701.
221. Sittner P and Tokuda M (1994), Thermoelastic martensitic transformation under combined stress - Simulation and experiment, in Numerical predictions of deformation processes and the behaviour of real materials, Proc 15th Int Risfi Symp on Mat Sci, SI Andersen, JB Bilde-Sorensen, T Lorentzen, OB Pedersen, and NJ Sorensen (eds), Riso Natl Laboratory, Roskilde, 537-544.
222. Perkins J (ed) (1975), Shape memory effects in alloys, Plenum Press, New York.
223. Muddle BC (ed) (1990), Martensitic Transformations I and II-ICOMAT-89, Mat Sci Forum, 56-58, Trans Tech Publications, Brookfield, USA
224. Haasen P (ed) (1991), Phase Transformations in Materials, VCH Verlagsgesellschaft GmbH, Weinheim, Germany.
225. Eucken S (ed) (1992), Progress in shape memory alloys, DGM Informationsgesellschaft, Oberursel, Germany.
226. Jena AK and Chaturvedi MC (1992), Phase transformation in metals, Prentice Hall, Englewood Cliffs NJ.
227. Eshelby JD (1957), The determination of the elastic field of an ellipsoidal inclusion and related problems, Proc R Soc London A 241 376-396.
228. Vacher P and Lexcellent Chr (1991), Study of pseudoelasticity behaviour of polycrystalline shape memory alloys by resistivity measurements and acoustic emission, in Mechanical Behaviour of Materials - ICM VI, M Jono and T Inoue (eds), Pergamon Press, Oxford, 3 231-236.
229. Yan WY (1995), Micromechanics constitutive model of single crystal transforming solids, PhD Thesis, Tsinghua Univ, Beijing, PR China (in Chinese).
230. Benveniste Y (1987), A new approach to the application of Mori-Tanaka theory in composite materials, Mech Mat 6 147-157.
231. Sun QP, Yu SW, and Hwang KC (1990), A micromechanics constitutive model of pure dilatational martensitic transformation of Zr02-containing ceramics, Acta Mech Sinica 6 (4) 141-150.
232. Hwang KC, Sun QP, and Yu SW (1990), A micromechanics constitutive theory for forward transformation plasticity; I, Non-proportional loading history, Acta Mech Sinica 6 (4) 324-332.
233. Sun QP and Hwang KC (1991), Micromechanics modeling for the constitutive behavior of polycrystalline shape memory alloys, in Constitutive Relations of Finite Deformation of Metals - TUT AM Symp, R Wang and DC Drucker (eds), Springer-Verlag, Berlin, 188-201.
234. Hwang KC and Sun QP (1993), Mesomechanics constitutive description on the pseudoelasticity of shape memory alloys, in Plasticity and mesomechanics, T Wang and BY Xu (eds), Peking Univ Press, 100-108 (in Chinese).
235. Hwang KC and Sun QP (1991), Transformation plasticity and its application to ceramics toughening, in Mechanical Behaviour of Materials - ICM VI, M Jono and T Inoue (eds), Pergamon Press, Oxford, Vol 1 159-164.
236. Sun QP and Hwang KC (1992), Micromechanical constitutive equations for thermoelastic phase transforming polycrystals, in Asia-Pacific Int Symp on Advances in Engineering Plasticity - AEPA’92, WB Lee (ed), Elsevier Science Publishers BV (North-Holland), Amsterdam, 259-266.
237. Hwang KC and Sun QP (1992), On constitutive relations of shape memory alloys, in Asia-Pacific Int Symp on Advances in Engineering Plasticity - AEPA’92, WB Lee (ed), Elsevier Science Publishers BV (North-Holland), Amsterdam, 35-40.
238. Lian L (1995), Numerical study on the constitutive behaviour of shape memory alloys, MSc Thesis, Tsinghua Univ, Beijing, PR China (in Chinese).
239. Stam GThM, van der Giessen E, and Meijers P (1994), Effect of transformation-induced shear strains on crack growth in zirconia-containing ceramics, Int J Solids Struct 31 (14) 1923-1948.
240. Sun QP, Huang Y, Yu SW, and Hwang KC (1991), Toughening analysis of mode III crack in transformation toughened ceramics, Acta Mech Solids Sinica 4 (3) 251-258.
241. Guo TF, Sun QP, and Zhang X (1996), The role of autocatalysis and transformation shear in crack tip zone shape and toughening of zirconia ceramics, in press Int J Solids Struct.
242. Sun QP, Guo TF, and Li XJ (1996), Effect of dual-scale microstructure on the toughness of laminar zirconia composites, in press Int J Fracture.
243. Sun QP (1989), Micromechanics constitutive theory of transformation plasticity and toughening analysis, PhD Thesis, Tsinghua Univ, Beijing, PR China (in Chinese).
244. Song GQ (1996), Study on micromechanics constitutive models for martensitic transformation, PhD Thesis, Tsinghua Univ, Beijing, PR China (in Chinese).
245. Needleman A (1989), Computational micromechanics, in Theoretical and Applied Mechanics, P Germain, M Piau and D Caillerie (eds), Elsevier Science Publishers BV (North-Holland), Amsterdam, 217-240.
246. Rammerstorfer FG, Fischer FD, and Bõhm HJ (1990), Treatment of micromechanical phenomena by finite elements, in Discretization Methods in Structural Mechanics, G Kuhn and H Mang (eds), Springer-Verlag, Berlin, 393-404.
247. Rammerstorfer FG, Fischer FD, Bõhm HJ, and Daves W (1992), Computational micromechanics of multiphase materials, Comput Struct 44 453-458.
248. Bõhm HJ, Rammerstorfer FG, and Fischer FD (1991), Design of material laws for natural and artificial multiphase materials by micromechanical concepts, in Mechanical Behaviour of Materials - ICM VI, M Jono and T Inoue (eds), Pergamon Press, Oxford, Vol 1 171-176.
249. Marketz F and Fischer FD (1994), Micromechanical modelling of stress-assisted martensitic transformation, Modelling Simul Mat Sci Eng 2 1017-1046.
250. Sjõstrõm S, Denis S, Gautier E, and Simon A (1989), FEM calculation of the micromechanics of a diffusional transformation, in Int Conf on Residual Stresses - ICRS2, G Beck, S Denis and A Simon (eds), Elsevier Appl Sci, London and New York, 416-422.
251. Ganghoffer JF, Denis S, Gautier E, Simon A, and Sjõstrõm S (1993), Finite element calculation of the micromechanics of a diffusional transformation, Eur J MechA/Solids 12 (1) 21-32.
252. Sjõstrõm S, Ganghoffer JF, Denis S, Gautier E, and Simon A (1994), Finite element calculation of the micro mechanics of a diffusional transformation. II. Influence of stress level, stress history and stress multiaxiality, Eur J Mech A/Solids 13 (6) 803-817.
253. Ganghoffer JF, Denis S, Gautier E, Simon A, and Sjõstrõm S (1991), Finite element calculation of the micromechanics of a diffusional transformation, in Mechanical Behavior of Materials - ICM VI, M Jono and T Inoue (eds), Pergamon Press, Oxford, Vol 1 165-170.
254. Ganghoffer JF, Denis S, Gautier E, Simon A, Simonsson K, and Sjõstrõm S (1991), Micromechanical simulation of a martensitic transformation by finite elements, J de Physique IV, Colloque C4, supplement au J de Physique III 1 (Nov) C4-77 - C4-82.
255. Marketz F (1994), Computational micromechanics study on martensitic transformation, PhD Thesis, Univ for Mining and Metallurgy, Leoben, Austria.
256. Marketz F and Fischer FD (1994), A micromechanical study on the coupling effect between microplastic deformation and martensitic transformation, Comp Mat Sci 3 307-325.
257. Marketz F and Fischer FD (1994), A micromechanical study of the deformation behavior of Fe-Ni steels under martensitic transformation, in Solid—> Solid Phase Transformations, WC Johnson, JM Howe, DE Laughlin, and WA Soffa (eds), TMS, Warrendale, 785-790.
258. Simonsson K (1994), Micro-mechanical FE simulations of the plastic behaviour of steels undergoing martensitic transformation, PhD Thesis, Linkõping Univ, Linkõping Studies in Science and Technology, Dissertations, No 362.
259. Marketz F, Fischer FD, and Tanaka K (1995), A computational micromechanics study on variant-coalescence in a shape memory alloy, J de Physique IV, Colloque C2, Supplement au J de Physique III 5 (Feb) C2-537 - C2-542.
260. Marketz F, Tanaka K, and Fischer FD (1996), Micromechanics of transformation-induced plasticity and variant coalescence, J de Physique IV, Colloque Cl, Supplement au J de Physique III 6 (Jan) Cl-445 - Cl-454.
261. Zackay VF and Parker ER (1973), Corrosion resistant metastable austenitic steels, U.S. Pat. No. 3, 752, 709.
262. Ashby MF (1972), The deformation of plastically non-homo-geneous materials, Phil Mag 21 339-424.
263. Angel T (1954), Formation of martensite in austenitic stainless steels, J.Iron Steel Inst 177 (May) 165-174.
264. Ludwigson DC and Berger JA (1969), Plastic behavior of metastable austenitic stainless steels, J Iron Steel Inst 207 (1) 63-69.
265. Hecker SS, Stout MG, Staudhammer KP, and Smith JL (1982), Effects of strain rate on deformation induced transformation in 304 stainless steel, Part 1. Magnetic measurements and mechanical behavior, Met Trans 13A (Apr) 619-626.
266. Goel NC, Sangal S, and Tangri K (1985), A theoretical model for the flow behavior of commercial dual-phase steels containing metastable retained austenite: Part 1. Derivation of flow curve equations, Met Trans 16A (11) 2013-2021.
267. Goel NC, Sangal S, and Tangri K (1985), A theoretical model for the flow behavior of commercial dual-phase steels containing metastable retained austenite: Part 2. Calculation of flow curves, Met Trans 16A (11) 2023-2029.
268. Ramirez JAC, Tsuta T, Mitani Y, and Osakada K (1992), Flow stress and phase transformation analyses in austenitic stainless steel under cold working, Part 1. Phase transformation characteristics and constitutive formulation by energetic criterion, JSME Ser I 35 (2) 201-209.
269. Tsuta T and Ramirez JAC (1993), Flow stress and phase transformation analyses in austenitic stainless steel under cold working, Part 2. Incremental theory under mulitaxial stress state by the finite element method, JSME Ser A 36 (1) 63-72.
270. Olson GB and Cohen M (1975), Kinetics of strain-induced martensitic nucleation, Met Trans 6A (April) 791-795.
271. Stringfellow RG and Parks DM (1991), A self-consistent model of isotropic viscoplastic behavior in multiphase materials, Int J Plasticity 7 529-547.
272. Tomita Y (1994), Constitutive modeling of mechanical characteristics of materials and computational simulation of plastic instabilites, Solid Mechanics Laboratory Research Rep 9306, Fac Eng, Kobe Univ, Japan.
273. Takechi H, Matsumura O, and Sakuma K (1987), Manufacture of high strength steel strip having good workability for automotive bumpers or door guard bars, Japan Kokai Tokyo Koho Japan Patent 62, 188, 729.
274. Matsumura O, Sakuma Y, and Takechi H (1987), Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel, Trans Iron Steel Inst Japan 27 570-579.
275. Matsumura O, Sakuma Y, and Takechi H (1992), Retained austenite in 0.4C - Si-0.8Mn- steel sheet intercritically heated and annealed, Iron Steel Inst Japan Int 32 (9) 1014-1020.
276. Leslie WC (1981), The physical metallurgy of steels, McGraw-Hill, New York NY.
277. Miihkinen VTT and Edmonds DV (1987), Microstructural examination of two experimental high strength bainitic low alloy steels containing silicon. Mat Sci Tech 3 (Jun) 422-431.
278. Chung JH and Chang YW (1993), Deformation and transformation processes of a multi-phase sheet steel containing retained austenite, Tetsu to Hagane 79 (6) 665-670 (in Japanese).
279. Jeong WC, Matlock DK, and Krauss G (1993), Effects of tensile-testing temperature on deformation and transformation behavior of retained austenite in a 0.14C-1.2SÍ-1.5Mn steel with ferrite-bainite-austenite structure, Mat Sci Eng A165 (Jan) 9-16
280. Sugimoto K, Misu M, Kobayashi M, and Shirasawa H (1993), Effects of second phase morphology and tensile properties in a TRIP aided dual phase steel sheet, Iron Steel Inst Japan Int 33 (7) 775-782.
281. Bangaru NRV and Sachdev AK (1982), Influence of cooling rate on the microstructure and retained austenite in an intercritically annealed vanadium containing HSLA steel, Met Trans 13A (Nov) 1899-1906
282. Lambropoulos JC (1986), Shear, shape and orientation effects in transformation toughening, Int J Solids Struct 22 (10) 1083-1106.
283. Chen IW (1991), Model of transformation toughening in brittle materials, J Am Ceramic Soc 74 (10) 2564-2572.
284. Heuer AH and Hobbs LW (eds) (1981), Advances in. Ceramics, Science and Technology of Zirconia, Vol 3, Am Ceramic Soc, Columbus OH.
285. Rose LRF (1986), The size of the transformation zone during steady-state cracking in transformation toughened materials, J Mech Phys Solids 34 (6) 609-616.
286. Rose LRF (1985), Theoretical aspects of reinforcement and toughening, in Fundamentals of Deformation and Fracture (JD Eshelby Memorial Symposium), BA Bilby, KJ Miller and JR Willis (eds), Cambridge Univ Press, Cambridge, 109-117.
287. Reyes-Morel PE, Cheng JS, and Chen IW (1988), Transformation plasticity of ceria-stabilized tetragonal zirconia polycrystals: II, Pseudoelasticity and shape memory effect, J Am Ceramic Soc 72 (8) 648-657.
288. Rose LRF (1987), The mechanics of transformation toughening, Proc R Soc London A412 151-169.
289. Marshall DB (1992), Design of high-toughness laminar zirconia composite, Ceramic Bull 71 (6) 969-973.
290. Rose LRF and Swain MV (1988), Transformation zone shape in ceria-partially-stabilized zirconia, Acta metall 36 (4) 955-962.
291. Yu CS and Shetty DK (1989), Transformation zone shape, size and crack-growth-resistance (R-curve) behavior of ceria-partially-stabilized zirconia polycrystals, J Am Ceramic Soc 72 (6) 921-928.
292. Qing XL, Sun QP, and Dai FL (1993), Study of transformation plasticity in tetragonal zirconia polycrystals by Moire interferometry, Acta Mech Sinica 9 (4) 330-336.
293. Sun QP, Zhao ZJ, Chen WZ, Qing XL, Xu XJ, and Dai FL (1994), Experimental study of stress-induced localized transformation plastic zones in tetragonal zirconia polycrystalline ceramics, J Am Ceramic Soc 74 (5) 1352-1356.
294. Sun QP, Zhao ZJ, Qing XL, Chen WZ, and Dai FL (1994), The stress-induced localized transformation plastic zones in tetragonal zirconia polycrystalline ceramics, Science in China (Series A) 24 (4) 383-388 (in Chinese).
295. Sun QP, Zhao ZJ, Qing XL, Xu XJ, and Dai FL (1992), Micro-macro experimental study on stress-induced transformation plastic zones in Ce-TZP, in Asia-Pacific Int Symp on Advances in Engineering Plasticity - AEPA’92
296. WB Lee (ed), Elsevier Science Publishers BV (North-Holland), Amstersdam, 571-576.
297. Marshall DB (1990), Crack shielding in ceria-partially-stabilised zirconia, J Am Ceramic Soc 73 (10) 319-321.
298. Stump DM (1991), The role of shear stresses and shear strains in transformation toughening, Phil Mag A 64 (4) 879-902.
299. 3) composites, J Am Ceramic Soc 74 (3) 678-681.
300. Yu CS, Shetty DK, Shaw MC, and Marshall DB (1992), Transformation zone shape effects on crack shielding in ceria-partially-stabilized zirconia (Ce-TZP)-alumina composites, J Am Ceramic Soc 75 (11) 2991-2994.
301. 3, J Am Ceramic Soc 74 (12) 2979-2987.
302. Chen IW and Reyes-Morel PE (1986), Implications of transformation plasticity in zirconia-containing ceramics: I, Shear and dilatation effects, J. Am Ceramic Soc 69 (3) 181-189.
303. Reyes-Morel PE and Chen IW (1988), Transformation plasticity of ceria-stabilized tetragonal zirconia polycrystals: I, Stress assistance and autocatalysis, J Am Ceramic Soc 72 (5) 343-353.
304. Rice JR (1976), The localization of plastic deformation, in Theoretical and Applied Mechanics, WT Koiter (ed), North-Holland, Amsterdam, 207-220.
305. Rudnicki JW and Rice JR (1975), Condition for the localization of deformation in pressure-sensitive dilatant materials, J Mech Phys Solids 23 (6) 371-394.
306. Sun QP, Huang Y, Yu SW, and Hwang KC (1990), Experimental and numerical research on transformation plasticity and toughening of Ce-TZP ceramics, in C-MRS Int Symp, DS Yan et al (eds), Elsevier Science Publishers BV (North-Holland), Amsterdam, Vol 5 195-199.
307. Horn LC and McMeeking RM (1990), Numerical results for transformation toughening in ceramics, Int J Solids Struct 26 (11) 1211-1223.
308. Stump DM and Budiansky B (1989), Crack growth resistance in transformation toughened ceramics, Int J Solids Struct 25 (6) 635-646.
309. Jeffrey SNP and Rogers CA (1994), The response of SMA hybrid composite materials to low velocity impact, J Intell Mat Sys Struct 5 530-535.
310. Sun QP (1994), A micromechanics analysis for the microstructure design of two-phase pseudoelastic composite, Acta Mech Sinica 10 (2) 162-168.
311. Sun QP and Hwang KC (1992), The crack tip zone shielding effect for the ductile particle reinforced brittle materials, Acta Mech Sinica 8 (2) 136-139.
312. Sun QP (1992), Constitutive relations of ceramic matrix-metal particles composite and the toughening analysis, Acta Mat Comp Sinica 9 (4) 33-37 (in Chinese).
313. Stam GThM (1994), A micromechanical approach to transformation toughening in ceramics, PhD Thesis, Delft Univ of Tech, Delft, The Netherlands.
314. Videau J-Chr, Cailletaud G, and Pineau A (1996), Experimental study of the transformation-induced plasticity in a Cr-Ni-Mo-Al-Ti steel, J.de Physique IV, Colloque Cl, Supplement au J de Physique III 6 (Jan) Cl-465 - Cl-474.
315. Bammann DJ, Prantil VC, and Lathrop JF (1995), A model of phase transformation plasticity, in Modelling of Casting, Welding and Advanced Solidification Processes VII, M Cross and J Campbell (eds), TMS, Warrendale, 275-285.
316. Bhattacharyya A and Weng GJ (1994), An energy criterion for the stress-induced martensitic transformation in a ductile system, J Mech Phys Solids 42 (11) 1699-1724.