Effect of plastic deformation and boundary conditions combined with elastic wave propagation on the collapse site of a crash box

Thin-Walled Structures

Volumn 46, Issue 10, 2008, Pages 1143-1163

  Rusinek, A ^a   Zaera, R ^b   Forquin, P ^a   Klepaczko, J R ^a  

^a UNIVERSITÉ DE LORRAINE   (France)

^b UNIVERSIDAD CARLOS III DE MADRID   (Spain)

Author keywords

Collapse of a steel crash box; Crashworthiness; Elastic waves; Numerical simulation; Plasticity

Indexed keywords

BOUNDARY CONDITIONS; CRASHWORTHINESS; ENERGY ABSORPTION; MILITARY APPLICATIONS; PLASTIC DEFORMATION; STRAIN RATE; WAVE PROPAGATION;

COLLAPSE OF A STEEL CRASH BOX; CONSTRUCTION ELEMENTS; STRAIN-RATE SENSITIVITY;

ELASTIC WAVES;

EID: 44949236208     PISSN: 02638231     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tws.2008.01.009     Document Type: Article

References (45)

1. Durrenberger L., Even D., Molinari A., and Rusinek A. Influence of the strain path on crash-properties of a crash-box structure by experimental and numerical approaches. J Phys IV 134 (2006) 1287-1293
2. Karagiozova D., and Jones N. Dynamic elastic-plastic buckling of circular cylindrical shells under axial impact. Int J Solid Struct 37 (2000) 2005-2034
3. Larour P, Verleysen P, Vermeulen M, Gomes MAR, Wedemeier A, Geoffroy JL, et al. Influence of pre-straining and microstructure on the dynamic properties of high strength sheet steels. MS&T 2004 Conference Proceedings, New Orleans, USA, 2004. p. 171-83.
4. Rusinek A, Klepaczko JR, Gadaj P, Nowacki WK. Plasticity of new steels used in automotive industries-temperature measurements by thermo-vision. SAE paper 2005-01-13626, 2005.
5. Fischer F.D., Reisner G., Werner E., Tanaka K., Cailletaud G., and Antretter T. A new view on transformation induced plasticity (TRIP). Int J Plasticity 16 (2000) 723-748
6. Tomita Y., and Shibutani Y. Estimation of deformation behavior of TRIP steels-smooth/ringed-notched specimens under monotonic and cyclic loading. Int J Plasticity 16 (2000) 769-789
7. Rusinek A, Zaera R, Klepaczko JR. Constitutive relations in 3-d for a wide range of strain rates and temperatures-application to mild steels. Int J Solid Struct, 2007; doi:10.1016/j.ijsolstr.2007.01.015.
8. Rusinek A., and Klepaczko J.R. Shear testing of s sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress. Int J Plasticity 17 (2001) 87-115
9. Haugou G., Markiewicz E., and Fabis J. On the use of the non direct tensile loading on a classical split Hopkinson bars apparatus dedicated to sheet metal specimens characterisation. Int J Impact Eng 8 (2006) 778-798
10. Nowacki W.K. Dynamic simple shear of sheets at high strain rates. In: Nowacki W.K., and Klepaczko J.R. (Eds). New experimental methods in material dynamics and impact, series: trends in mechanics of materials vol. 3 (2001) 309-336
11. Mouro P, Gary G, Zhao H. Dynamic tensile testing of sheet metal. J Phys IV 2000;49-54.
12. Rusinek A., Zaera R., Klepaczko J.R., and Cheriguene R. Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel. Acta Mater 53 (2005) 5387-5400
13. Awade A. CRASH AUTOMOBILE-importance de la température et de l'anisotropie dans les essays dynamiques, Source RENAULT, Oral presentation. Proceeding MECAMAT, Aussois, France, 2005.
14. Gloger S, Wanke T. Structural requirements and material selection in body development. In: von Hagen I, Wieland HJ, editors. Steels in cars and trucks. Wiesbaden/Germany. Düsseldorf/Germany: Verlag Stahleisen; 2005. p. 32-5.
15. Karagiozova D., and Jones N. Dynamic buckling of elastic-plastic square tubes under axial impact-II: structural response. Int J Impact Eng 30 (2004) 167-192
16. Rusinek A., and Zaera R. Finite element simulation of steel ring fragmentation under radial expansion. Int J Impact Eng 34 (2007) 799-822
17. Nemat-Nasser S., and Guo W.G. Thermomechanical response of HSLA-65 steel plates. Mech Mater 37 (2005) 379-405
18. Molinari A., and Ravichandran G. Constitutive modeling of high-strain-rate deformation in metals based on the evolution of an effective microstructural length. Mech Mater 37 (2005) 737-752
19. Johnson G.R., Holmquist T.J., Anderson Jr. C.E., and Nicholls A.E. Strain-rate effects for high-strain-rate computations. J Phys IV France 134 (2006) 391-396
20. Zaera R., and Fernandez-Saez a.J. An implicit consistent algorithm for the integration of thermoviscoplastic constitutive equations in adiabatic conditions and finite deformations. Int J Solids Struct 43 (2006) 1594-1612
21. Zhao H., Abdennadher S., and Othman R. An experimental study of square tube crushing under impact loading using a modified large scale SHPB. Int J Impact Eng 32 (2006) 1174-1189
22. Song H.W., Fan Z.J., Yu G., Wang Q.C., and Tobota A. Partition energy absorption of axially crushed aluminium foam-filled hat section. Int J Solid Struct 42 (2005) 2575-2600
23. Kavi H., Kaan Toksoy A., and Guden M. Predicting energy absorption in a foam-filled thin-walled aluminium tube based on experimentally determined strengthening coefficient. Mater Design 27 (2006) 263-269
24. Aktay L., Toksoy A.K., and Güden M. Quasi-static axial crushing of extruded polystyrene foam-filled thin-walled aluminium tubes: experimental and numerical analysis. Mater Design 27 (2006) 556-565
25. Peixhino NRM. Study of visco-plasticity models for the prevision of mechanical behaviour of high strength steels subjected to impact. Doctorat thesis, University of Minho, 2004 [Portugal].
26. Ellobody A. Buckling analysis of high strength stainless steel stiffened and unstiffened slender hollow section columns. J Constructional Steel Research 63 (2007) 145-155
27. ABAQUS/Explicit User Manual volumes I and II, version 6.4.1, Hibbitt, Karlsson & Sorensen, Inc., 2004.
28. Merle R. Mise en oeuvre d'un essai de double cisaillement en grandes déformations et sous solicitations dynamiques. Application à la caractérisation des tôles utilisées dans le crash automobile, Ph.D. thesis, LMT Cachan Paris, 2006.
29. Song H.W., Fan Z.J., Yu G., Wang Q.C., and Tobota A. Partition energy absorption of axially crushed aluminum foam-filled hat sections. Int J Solid Struct 42 (2005) 2575-2600
30. Tam LL, Kurokawa T. Plastic buckling of cylinders by axial impact. In: Proceeding of the 1982 joint conference on experimental mechanics, vol. 2. JSME; 1982. p. 950-5.
31. Kolsky H. An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc London 62B (1949) 676-700
32. Karagiozova D., Alves M., and Jones N. Inertia effects in axisymmetrically deformed cylindrical shells under axial impact. Int J Impact Eng 24 (2000) 1083-1115
33. Karagiozova D., and Jones N. Influence of stress waves on the dynamic progressive and dynamic plastic buckling of cylindrical shells. Int J Solids Struct 38 (2001) 6723-6749
34. Johnson G., and Cook W. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21 (1985) 31-48
35. Meguid S.A., Attia M.S., Stranart J.C., and Wang W. Solution stability in the dynamic collapse of square aluminium columns. Int J Impact Eng 34 (2007) 348-359
36. Zhao H., and Abdennadher S. On the strength enhancement under impact loading of square tubes made from rate insensitive metals. Int J Solid Struct 41 (2004) 6677-6697
37. Jensen Ø., Hopperstad O.S., and Langseth M. Transition from progressive to global buckling of aluminium extrusions-a numerical study. Int J Crashworthiness 10 6 (2005) 609-620
38. Kang W.J., Cho S., Huh H., and Chung D.T. Modified Johnson-Cook model for vehicle body crashworthiness simulation. Int J Vehicle Design 21 (1999) 424-435
39. Jeunechamps P.P., and Ponthot J.P. An efficient implicit approach for the thermomechanical behaviour of materials submitted to high strain rates. J Phys IV 134 (2006) 515-520
40. Rusinek A., Klepaczko J.R., and Toth L.S. Influence de l'échauffement adiabatique en régime adiabatique: application aux tôles d'acier. Revue Française de mécanique 2 (2001) 29-37
41. Plassart G, Philip G. Materials criteria selection and certification process for the body in white in PSA PEUGEOT CITROËN. SAE paper 2002-01-2051, 2002.
42. Newsletter Arcelor Auto No. 3, Arcelor group, January 2003.
43. Al Galib D., and Limam A. Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes. Thin-Wall Struct 42 (2004) 1103-1137
44. Shim V.P.W., and Yap K.Y. Modelling impact deformation of foam-plate sandwich systems. Int J Impact Eng 19 (1997) 615-636
45. Bardenheier R., and Rogers G. Dynamic impact testing with servohydraulic testing machines. J Phys IV France 134 (2006) 693-699