Transient contact pressure during flattening of thermal spray droplet and its effect on splat formation

Journal of Thermal Spray Technology

Volumn 13, Issue 2, 2004, Pages 229-238

  Li, Chang Jiu ^a   Li, Jing Long ^b  

^a XI'AN JIAOTONG UNIVERSITY   (China)

^b NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

Droplet impact; Dynamic contact pressure; Flattening; Numerical simulation; Plasma spray; Splashing; Splat formation

Indexed keywords

DEFORMATION; DENSITY (SPECIFIC GRAVITY); DROP FORMATION; EVAPORATION; HEATING; MORPHOLOGY; NUMERICAL ANALYSIS; PRESSURE DISTRIBUTION; PRESSURE EFFECTS; SUBSTRATES; SURFACE PHENOMENA; THERMAL EFFECTS;

DROPLET FLATTENING; FLATTENING DEGREE; MARKET AND CELL TECHNIQUE; SPLAT FORMATION; SURFACE ADSORBENTS; THERMAL SPRAY DROPLET; TRANSIENT CONTACT PRESSURE;

PLASMA SPRAYING;

EID: 2642518333     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1361/10599630418158     Document Type: Article

References (34)

1. H. Jones: "Cooling, Freezing and Substrate Impact of Droplets Formed by Rotary Atomization," J. Phys. D: Appl. Phy., 1971, 4, pp. 1657-60.
2. C-J. Li, A. Ohmori, and Y. Harada: "Experimental Investigation of the Morphologies of Plasma Sprayed Copper Splats," in Thermal Spraying: Current Status and Future Trends, A. Ohmori, ed., Japan High Temperature Society, Osaka University, Osaka, Japan, 1995, pp. 333-39.
3. C-J. Li, J-L. Li, W-B. Wang, A. Ohmori, and K. Tani: "Effect of Particle Substrate Materials Combinations on the Morphology of Plasma Sprayed Splats," in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 481-88.
4. L. Bianchi, A. Grimaud, F. Blein, P. Lucchese, and P. Fauchais: "Comparison of Plasma-Sprayed Alumina Coatings by RF and DC Plasma Spraying," J. Therm. Spray Technol., 1995, 4, pp. 59-66.
5. M. Fukumoto, S. Katoh, and I. Okane: "Splat Behavior of Plasma Sprayed Particles on Flat Substrate Surface" in Thermal Spraying: Current Status and Future Trends, A. Ohmori, ed., Japan High Temperature Society, Osaka University, Osaka, Japan, 1995, pp. 353-58.
6. C-J. Li, J-L. Li, and W-B. Wang: "The Effect of Substrate Preheating and Surface Organic Covering on Splat Formation," in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1988, pp. 473-80
7. C-J. Li, A. Ohmori, and K. Tani: "The Morphology of Plasma-Sprayed Molybdenum Splats," in Surface Modification Technology, Vol. X, T.S. Sudarshan, K.A. Khor, and W. Reitz, ed., The Institute of Materials, London, 1997, pp. 934-45.
8. G. Trapaga, E.F. Matthys, J.J. Valencia, and J. Szekely: "Fluid Flow, Heat Transfer, and Solidification of Molten Metal Droplets Impacting on Substrates: Comparison of Numerical and Experimental Results," Metall. Trans. B, 1992, 23B, pp. 701-18.
9. M. Bertagnolli, M. Marchese, and G. Jacucci: "Modeling of Particles Impacting on a Rigid Substrate Under Plasma Spraying Conditions," J. Therm. Spray Technol., 1995, 4, pp. 41-49.
10. H. Liu, E.J. Lavernia, and R.H. Rangel: "Numerical Simulation of Impingement of Molten Ti, Ni, and W Droplets on a Flat Substrate," J. Therm. Spray Technol., 1993, 2, pp. 369-78.
11. M. Bussmann, S.D. Aziz, S. Chandra, and J. Mostaghimi: "3D Modeling of Thermal Spray Droplet Splashing," in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 413-18.
12. M. Vardelle, A. Vardelle, P. Fauchais, and C. Moreau: "Pyrometer System for Monitoring the Particle Impact on a Substrate During a Plasma Spray Process," Meas. Sci. Technol., 1994, 5, pp. 205-12.
13. J. Madejski: "Solidification of Droplets on a Cold Substrate," Int. J. Heat Mass Transfer, 1976, 19, pp. 1009-13.
14. C-J. Li, J-L. Li., W-B. Wang, A-J. Fu, and A. Ohmori: "A Mechanism of the Splashing During Droplet Splatting in Thermal Spraying," in Tagungsband Conference Proceedings, E. Lugscheider and P.A. Kammer, ed., DVS German Welding Society, Germany, 1999, pp. 513-18.
15. X. Jiang, Y. Wan, H. Herman, and S. Sampath: "Role of Condensates and Adsorbates on Substrate Surface on Fragmentation of Impinging Molten Droplets During Thermal Spraying," Thin Solid Films, 2001, 385, pp. 132-41.
16. M. Pasandideh-Fard, V. Pershin, I. Thomson, S. Chandra, and J. Mostaghimi: "Splat Shapes in a Thermal Spray Coating Process: Simulation and Experiments," J. Therm. Spray Technol., 2002, 11, pp. 206-17
17. G. Montavon, Z.G. Feng, C. Coddet, Z.Q. Feng, and M. Domaszewski: "Influence of the Spray Parameters on the Transient Pressure Within a Molten Particle Impacting onto a Flat Substrate," in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM Internationals, Materials Park, OH, 1997, pp. 627-33.
18. H.I. Rosten and D.B. Spalding: Shareware PHOENICS Beginner's Guide: CHAM Report Number TR100, Concentration Heat and Momentum Ltd., London, UK, 1987.
19. A.A. Amsden and H.F. Harlow: "The SMAC Method: A Numerical Technique for Calculating Incompressible Fluid Flows," Los Alamos Scientific Laboratory Report, LA-4370, Los Alamos, NM, 1970.
20. C-J. Li and J-L. Li: "Numerical Simulations of Droplet Flattening in Plasma Spraying," Aeronautical Manufacturing Technol., 1999, 5, pp. 57-59 (in Chinese).
21. C-J. Li, H-L. Liao, P. Gougeon, G. Montavon, and C.Coddet: "Effect of Reynolds Number of Spray Particle on the Flattening Degree," in Proceedings of 4th ITSC, C. Moreau, ed., Orlando, ASM International, Materials Park, OH, 2003, pp. 875-82.
22. T.E. Faber: "Fluid Dynamics for Physicists," Cambridge University Press, Cambridge, UK, 1997.
23. O.G. Engel: "Waterdrop Collisions With Solid Surfaces," J. Res. National Bureau of Standards, 1955, 54, pp. 281-98.
24. E. Honegger: "Tests on Erosion Caused by Jets," Brow Boveri Rev., 1927, 14, p. 95.
25. J.E. Field: "ELSI Conference: Invited Lecture, Liquid Impact: Theory, Experiment, Applications," Wear, 1999, 233-235, pp. 1-12.
26. P.A. Engel: "Impact Wear of Materials," Elsevier Scientific Publishing Company, Amsterdam, The Netherlands, 1976.
27. F.P. Bowden and D. Tabor: The Friction and Lubrication of Solids, Part II, The University Press, Oxford, London, UK, 1964.
28. R. McPherson and B.V. Shafer: "Interlamellar Contact Within Plasma-Sprayed Coatings," Thin Solid Films, 1982, 97, pp. 201-04.
29. 3 Coatings by Using Copper Electroplating," Thin Solid Films, 1991, 201, pp. 241-52.
30. C-J. Li and A. Ohmori: "Relationship Between the Microstructure and Properties of Thermally Sprayed Deposits," J. Therm. Spray Technol., 2002, 11, pp. 365-74.
31. C-J. Li, J-L. Li, and W-B. Wang: "Experimental Investigation of the Morphology of Plasma Sprayed Nickel Splats," in Proceedings of C-MRS (China Materials Research Society) and MRS-K (Materials Research Society of Korea) Joint Symposium, Beijing, China, K. Zhou, L. Wen, and H.M. Jang, ed., Chemical Industrial Publishing House, Beijing, 1996, pp. 768-71.
32. S. Glod, D. Poulikakos, Z. Zhao, and G. Yadigarogglu: "An Investigation of Microscale Explosive Evaporization of Water on an Ultrathin Pt Wire," Inter. J. Heat and Mass Transfer, 2002, 45, pp. 367-79.
33. C. Moreau, P. Gougeon, and M. Lamontagne: "Influence of Substrate Preparation on the Flattening and Cooling of Plasma-Sprayed Particles," J. Therm. Spray Technol., 1995, 4, pp. 25-33.
34. H.K. Park, D. Kim, and C.P. Grigoropoulos: "Pressure Generation and Measurement in the Rapid Vaporization of Water on a Pulsed-Laser-Heated Surface," J. Appl. Phys, 1996, 80, pp. 4072-81.