The influence of boundary conditions and loading mode on high-resolution finite element-computed trabecular tissue properties

Bone

Volumn 44, Issue 4, 2009, Pages 573-578

  Bevill, Grant ^a   Eswaran, Senthil K ^a   Farahmand, Farhad ^a   Keaveny, Tony M ^a,b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b University of California at Berkeley   (United States)

Author keywords

Cancellous bone; Finite element modeling; Micro CT; Tissue mechanical properties; Tissue property calibration

Indexed keywords

ADULT; AGED; ARTICLE; BONE DENSITY; COMPRESSION; CONTROLLED STUDY; FEMALE; FEMUR NECK; FINITE ELEMENT ANALYSIS; HUMAN; HUMAN TISSUE; MALE; MICRO-COMPUTED TOMOGRAPHY; SENSITIVITY ANALYSIS; TISSUE STRUCTURE; TRABECULAR BONE; VERTEBRA;

AGED; AGED, 80 AND OVER; BIOMECHANICS; ELASTIC MODULUS; FEMALE; FINITE ELEMENT ANALYSIS; HUMANS; MALE; MECHANICAL PROCESSES; MIDDLE AGED; MODELS, BIOLOGICAL; SPINE; STRESS, MECHANICAL; X-RAY MICROTOMOGRAPHY;

EID: 61749089933     PISSN: 87563282     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.bone.2008.11.015     Document Type: Article

References (36)

1. Cummings S.R., Karpf D.B., Harris F., Genant H.K., Ensrud K., LaCroix A.Z., et al. Improvement in spine bone density and reduction in risk of vertebral fractures during treatment with antiresorptive drugs. Am. J. Med. 112 (2002) 281-289
2. Delmas P.D. How does antiresorptive therapy decrease the risk of fracture in women with osteoporosis?. Bone 27 (2000) 1-3
3. Hernandez C.J., and Keaveny T.M. A biomechanical perspective on bone quality. Bone 39 (2006) 1173-1181
4. Niebur G.L., Feldstein M.J., Yuen J.C., Chen T.J., and Keaveny T.M. High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone. J. Biomech. 33 (2000) 1575-1583
5. Pistoia W., van Rietbergen B., Laib A., and Ruegsegger P. High-resolution three-dimensional-pQCT images can be an adequate basis for in-vivo microFE analysis of bone. J. Biomech. Eng. 123 (2001) 176-183
6. Bevill G., Eswaran S.K., Gupta A., Papadopoulos P., and Keaveny T.M. Influence of bone volume fraction and architecture on computed large-deformation failure mechanisms in human trabecular bone. Bone 39 (2006) 1218-1225
7. Gibson L.J. The mechanical behavior of cancellous bone. J. Biomech. 18 (1985) 317-328
8. Rho J.Y., Ashman R.B., and Turner C.H. Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. J. Biomech. 26 (1993) 111-119
9. Townsend P.R., Rose R.M., and Radin E.L. Buckling studies of single human trabeculae. J. Biomech. 8 (1975) 199-201
10. Choi K., Kuhn J.L., Ciarelli M.J., and Goldstein S.A. The elastic-moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus. J. Biomech. 23 (1990) 1103-1113
11. Rho J.Y., Roy M.E., Tsui T.Y., and Pharr G.M. Elastic properties of microstructural components of human bone tissue as measured by nanoindentation. J. Biomed. Materi. Res. 45 (1999) 48-54
12. Guo X.E. Mechanical properties of cortical bone and cancellous tissue. In: Cowin S.C. (Ed). Bone mechanics handbook (2001), CRC Press, Boca Raton 10.1-10.23
13. Van Rietbergen B., Weinans H., Huiskes R., and Odgaard A. A new method to determine trabecular bone elastic properties and loading using micromechanical finite element models. J. Biomech. 28 (1995) 69-81
14. Bayraktar H.H., Morgan E.F., Niebur G.L., Morris G.E., Wong E.K., and Keaveny T.M. Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue. J. Biomech. 37 (2004) 27-35
15. Jacobs C.R., Davis B.R., Rieger C.J., Francis J.J., Saad M., and Fyhrie D.P. The impact of boundary conditions and mesh size on the accuracy of cancellous bone tissue modulus determination using large scale finite element modeling. J. Biomech. 32 (1999) 1159-1164
16. Ulrich D., Hildebrand T., Van Rietbergen B., Müller R., and Rüegsegger P. The quality of trabecular bone evaluated with micro-computed tomography, FEA and mechanical testing. Stud. Health Technol. Inform. 40 (1997) 97-112
17. Hou F.J., Lang S.M., Hoshaw S.J., Reimann D.A., and Fyhrie D.P. Human vertebral body apparent and hard tissue stiffness. J. Biomech. 31 (1998) 1009-1015
18. Ladd A.J., Kinney J.H., Haupt D.L., and Goldstein S.A. Finite-element modeling of trabecular bone: comparison with mechanical testing and determination of tissue modulus. J. Orthop. Res. 16 (1998) 622-628
19. Kabel J., van Rietbergen B., Dalstra M., Odgaard A., and Huiskes R. The role of an effective isotropic tissue modulus in the elastic properties of cancellous bone. J. Biomech. 32 (1999) 673-680
20. Homminga J., McCreadie B.R., Ciarelli T.E., Weinans H., Goldstein S.A., and Huiskes R. Cancellous bone mechanical properties from normals and patients with hip fractures differ on the structure level, not on the bone hard tissue level. Bone 30 (2002) 759-764
21. Keaveny T.M., Borchers R.E., Gibson L.J., and Hayes W.C. Theoretical analysis of the experimental artifact in trabecular bone compressive modulus. J. Biomech. 26 (1993) 599-607
22. Odgaard A., and Linde F. The underestimation of Young's modulus in compressive testing of cancellous bone specimens. J. Biomech. 24 (1991) 691-698
23. Un K., Bevill G., and Keaveny T.M. The effects of side-artifacts on the elastic modulus of trabecular bone. J. Biomech. 39 (2006) 1955-1963
24. Morgan E.F., and Keaveny T.M. Dependence of yield strain of human trabecular bone on anatomic site. J. Biomech. 34 (2001) 569-577
25. Keaveny T.M., Pinilla T.P., Crawford R.P., Kopperdahl D.L., and Lou A. Systematic and random errors in compression testing of trabecular bone. J. Orthop. Res. 15 (1997) 101-110
26. Ford C.M., and Keaveny T.M. The dependence of shear failure properties of bovine tibial trabecular bone on apparent density and trabecular orientation. J. Biomech. 29 (1996) 1309-1317
27. Lewis G. Properties of acrylic bone cement: state of the art review. J. Biomed. Mater. Res. 38 (1997) 155-182
28. Fenech C.M., and Keaveny T.M. A cellular solid criterion for predicting the axial-shear failure properties of trabecular bone. J. Biomech. Eng. 121 (1999) 414-422
29. Nagaraja S., Couse T.L., and Guldberg R.E. Trabecular bone microdamage and microstructural stresses under uniaxial compression. J. Biomech. 38 (2005) 707-716
30. Morgan E.F., Bayraktar H.H., and Keaveny T.M. Trabecular bone modulus-density relationships depend on anatomic site. J. Biomech. 36 (2003) 897-904
31. Day J.S., Ding M., Bednarz P., van der Linden J.C., Mashiba T., Hirano T., et al. Bisphosphonate treatment affects trabecular bone apparent modulus through micro-architecture rather than matrix properties. J. Orthop. Res. 22 (2004) 465-471
32. Misof B.M., Roschger P., Cosman F., Kurland E.S., Tesch W., Messmer P., et al. Effects of intermittent parathyroid hormone administration on bone mineralization density in iliac crest biopsies from patients with osteoporosis: a paired study before and after treatment. J. Clin. Endocrinol. Metab. 88 (2003) 1150-1156
33. Roschger P., Rinnerthaler S., Yates J., Rodan G.A., Fratzl P., and Klaushofer K. Alendronate increases degree and uniformity of mineralization in cancellous bone and decreases the porosity in cortical bone of osteoporotic women. Bone 29 (2001) 185-191
34. Zoehrer R., Roschger P., Paschalis E.P., Hofstaetter J.G., Durchschlag E., Fratzl P., et al. Effects of 3- and 5-year treatment with risedronate on bone mineralization density distribution in triple biopsies of the iliac crest in postmenopausal women. J. Bone Miner. Res. 21 (2006) 1106-1112
35. Roschger P., Fratzl P., Klaushofer K., and Rodan G. Mineralization of cancellous bone after alendronate and sodium fluoride treatment: a quantitative backscattered electron imaging study on minipig ribs. Bone 20 (1997) 393-397
36. Valenta A., Roschger P., Fratzl-Zelman N., Kostenuik P.J., Dunstan C.R., Fratzl P., et al. Combined treatment with PTH (1-34) and OPG increases bone volume and uniformity of mineralization in aged ovariectomized rats. Bone 37 (2005) 87-95