Developments in the processing and properties of particulate Al-Si composites

JOM

Volumn 49, Issue 11, 1997, Pages 31-37

  Ejiofor, J U ^a,b,c   Reddy, R G ^c,d,e  

^a ENUGU STATE UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Nigeria)

^b Shelco Foundries ^*

^c TMS   (United States)

^d UNIVERSITY OF UTAH   (United States)

^e UNIVERSITY OF ALABAMA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZATION; BINARY ALLOYS; COMPOSITE MATERIALS; COST EFFECTIVENESS; DEPOSITION; INDUSTRIAL ECONOMICS; INFILTRATION; METAL CASTING; MIXING; PARTICLES (PARTICULATE MATTER);

RHEOCASTING; SPRAY ATOMIZATION;

ALUMINUM ALLOYS;

EID: 0031268263     PISSN: 10474838     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11837-997-0008-5     Document Type: Review

References (108)

1. S.V. Nair, J.K. Tien, and R.C. Bates, Intl. Met. Rev., 31 (1985), p. 275.
2. P.K. Rohatgi, S. Ray, and Y. Liu, Intl. Mater. Rev., 37 (1993), p. 129.
3. K.K. Chawla, Composite Materials Science and Engineering (New York: Springer-Verlag, 1992) p. 102.
4. I.A. Ibrahim, F.A. Mohammed, and E.J. Lavemia, J. Mater. Sci., 26 (1991), pp. 1137-1155.
5. V. Gondhalekar and K. Patni, Adv. Mater. Processes, 149 (3) (1996), pp 24-25.
6. K.K. Chawla, P.K. Liaw, and S.G. Fishman, JOM, 48 (2) (1996), pp. 43-44.
7. I.V. Gaurilin, The Course of Lectures: Cast Metal-Matrix Composites, (Vladimir: Vladimir Polytechnic Institute, 1992).
8. B.M. Cox et al., in Ref. 15, pp. 88-99.
9. J.U. Ejiofor, B.A. Okorie, and R.G. Reddy, J. Matls. Sci. (1997).
10. S.R. Nutt, J. Amer. Ceram. Soc., 67 (1984), p. 428.
11. J.U. Ejiofor and R.C. Reddy (paper presented at the 1997 TMS Meeting, Orlando, FL, 9-14 February 1997).
12. G.S. Cole, Proc. Cast Metal Matrix Composites, ed. D.M. Stefanescu and S. Sen (Tuscaloosa, AL: AFS, 1993), pp. 9-19.
13. C.G.E. Mangin, J.A. Isaacs, and J.P. Clark, JOM, 48 (2) (1996), pp. 49-51
14. D.L. Eric, Prog. Powd. Met., 42 (1986), pp. 45-65.
15. S.Sen, D.M. Stefanescu, and B.K. Dhindaw, in Ref. 12, pp. 180-183.
16. W.J. Savage, in Ref. 12, pp. 100-109.
17. H.J. Rack, Processing and Proper, of Powder Metallurgy Composites, ed. P. Kumar, K. Vedular, and A. Ritter (Warrendale, PA: TMS, 1988), p. 155.
18. Y. Wu, H. Liu, and E.J. Lavemia, Scripta Metallurgica et Materialia, 43 (1993), pp. 41-61.
19. D.J. Lloyd, Comp. Sci. & Tech., 35 (1989), pp. 159-179.
20. D.M. Stefanescu et al., Metall. Trans., 21A (1990), pp. 231-239.
21. W. Wang and F. Ajersch, Microstructure Formation During Solidification of Metal Matrix Composites, ed. P.K. Rohatgi (Warrendale, PA: TMS, 1993), pp. 63-82.
22. C.W. Clyne et al, J. Mater. Sci., 20 (1985), p. 85.
23. P.K. Rohatgi, R. Asthana, and S. Das, Intl. Met. Rev., 30 (1986), p. 115.
24. K.G. Satyanarayana, R.M. Pillai, and B.C. Pai, Handbook of Ceramics and Composites, ed. N.P. Cheremisinoff (New York: Marcel Dekker, 1990).
25. B.C. Pai et al., J. Mater. Sci., 30 (1995), pp. 1903-1911.
26. A. Mortensen, J.A. Cornie, and M.J.C. Flemings, Metall. Trans., 19A (1988), p. 709.
27. T. Donomoto et al., SAE technical paper no. 83052 (Detroit, MI: SAE, 1983).
28. R. Kreibar, T. Morel, and M. Toaz, SAE paper 910632 (Detroit, MI: SAE, 1991).
29. D.J. Lloyd, Intl. Mater. Rev., 39 (1) (1994), pp. 1-23.
30. J. Weinstein, Prof. Inti. Symp. on Advances in Processing and Characterization if Ceramic MMC, CIM/ICM, vol. 17, ed. H. Mostaghaci (New York: Pergamon Press, 1982), p. 132.
31. E.F. Fascetta et al., Trans. AFS., 81 (1973), p. 81.
32. R. Mehrabian, R.G. Riek, and M.C. Flemings, Metall. Trans., 5 (1974), p. 1899.
33. J. Yang et al., Proc. of 4th Natl. Conf. an Composite Materials (London: Elsevier, 1996), p. 515.
34. H.J. Rack, Dispersion-Strengthened Aluminum Alloys, ed. Y.M. Kim and W. Griffith (Warrendale, PA: TMS, 1988).
35. S. Krishnamurty et al., Proc. Symp. on Metal-Ceramic Matrix Composites: Processing, Modeling and Mechanical Behavior, ed. R.B. Bhagat et al. (Warrendale, PA: TMS, 1990), p. 145.
36. J.U. Ejiofor, B. A. Okorie, and R.G. Reddy, J. Mater. Eng. and Perf., 6 (3) (1997), pp. 1-10.
37. G. Elkabir et al., Scripte Metall., 20 (1986) p. 141.
38. Y. Wu and E.J. Lavemia, JOM, 43 (9) (1991), p. 16.
39. L. Leatham, Adv. Mater & Processes, 150 (2) (1996), pp. 31-34.
40. C.L. Buhrmaster, D.E. Clark, and H.O. Smart, J. Met., 40 (1988), p. 44.
41. J. White et al., Al-Li Alloys V, ed. T.H. Sanders and E.A. Starke, Jr. (Williamsburg, VA: MCE Publications. 1989), p. 1635.
42. Martin-Marietta Corp., U.S. patent 4,710,348 (1987).
43. D.M. Kocherginsky and R.G. Reddy, Proc. In Situ Reactions for Synthesis of Composites, Ceramics, and Intermetallics (Warrendale, PA: TMS, 1995), pp. 159-167.
44. M. Taya and R.J. Arsenault, Metal Matrix Composites: Thermomechanical Behavior (New York: Pergamon Press, 1989), p. 157.
45. A. Sato and R. Mehrabian, Metall. Trans., 7B (1976), p. 443.
46. "Metals," Adv. Mater. & Processes, 53 (2) (1996), p. 7.
47. J.E. Gruzelski and B.M Closset, The Treatment of Liquid Al-Si Alloys (Des Plaines, IL: AFS, 1990), pp. 13-15.
48. F. Dimayuga, Intl. Conf. of Molten Metal Aluminum Processing (Tuscaloosa, AL: AFS, 1989).
49. G. Chai and L. Backerud, AFS Trans., 100 (1992), p. 847-854.
50. H.S. Rao et al., Prakt. Metallogr., 31 (1994), pp. 191-198.
51. G.K. Sigworth, AFS Trans., 85 (1985), p. 291.
52. D.Y. Amaro et al., AFS Trans., 10, pp. 152-165.
53. J. Birch et al., Intl. Conf. of Solidification Proc. (London: Elsevier, 1987).
54. S. Das et al., Cast MMC Proc., ed. S.H. Fishman and A.K. Dhingra (Metals Park, OH: ASM, 1988), pp. 243-248.
55. J. Yang and D.D.L. Chung, J. Mater. Sci., 24 (1989), pp. 3605-3612.
56. Metal Matrix Composites: The Next Generation of High Performance Materials - Emerging Technologies, 20 (Englewaod Forties, NJ: Technical Insights Publishers, 1987).
57. Advanced Composites Bulletin, 1 (1988), pp. 2-9.
58. P. Meyer et al., J. Amer Ceram. Soc., 10 (1972), pp. 110-132.
59. Y. Chen and D.D.L. Chung, J. Mater. Sci., 20 (1985), pp. 143-147.
60. M.K. Premkumar, W.H. Hunt, Jr, and R.R. Sawtell, JOM, 44 (7) (1992), pp. 24-28.
61. CMSH Brochure, Sumitomo Electric Industries, Japan.
62. M.K. Surappa and P.K. Rohatgi, Met. Technol., 5 (1978), pp. 358-361.
63. R.N. Sanders and A.R. Valdo, Ethyl Corporation, "Aluminum-Silicon Composites," U.S. patent 3,961,945.
64. M.K. Surappa and P.K. Rohatgi, J. Mater. Sci., 16 (1981), pp. 983-993.
65. V.G. Gorbunov, U.D. Parshin, and V.V. Panin, Russ. Cast Prod., 8 (1974).
66. J. Tafto et al., Cast Reinforced Metal Composites, ed. S.H. Fishman and A.K. Dhingra (Metals Park, OH: ASM, 1988), pp. 71-75.
67. Alcan Aluminum Corp, U.S. patent 4,786,467 (1988).
68. J.B. Borradaile, S. Skervold, and W. Ruch, Extended Abstracts of Conf. on Metal Matrix Composites: Property, Optimization and Applications (U.K.: IOM, 1989).
69. T. Sritharan et al., in Ref. 68, pp. 13-22.
70. M. Popescu, S. Dionne, J. Lo and F. Goodwin, in Ref. 68, pp. 166-179.
71. D.J. Lloyd, High Performance Composites for the 1990s, ed. S.K. Das (Warrendale, PA: TMS, 1990), pp. 33-45.
72. P.S. Robi et al., Mater. Charact., 27 (1991), pp. 11-18.
73. M.A. Martinez, A. Martin, and J. Lorca, Scripta Metallurgica et Materialia, 28 (1993), pp. 207-212.
74. G. Ramani et al., Scripts Metallurgica et Materialia, 73 (1993), pp. 405-410.
75. S.K. Rhee, J. Amer Ceram. Soc., 55 (1972), p. 300.
76. I. Gavrilin and A. Sverdlin, J. Amer Ceram. Soc., 10 (1972), pp. 133-142.
77. H. Plate, Ph.D. thesis, Techniechen Hochschule, Aachen, 1971.
78. R. Shrivnath, P.K. Sengupta, and T.S. Eyre, British Foundryman, 70 (1977), p. 349.
79. S. Das and S.V. Prasad, Wear, 133 (1989), pp. 173-187.
80. B.P. Krishnan, M.K. Surappa, and P.K. Rohatgi, J. Mater. Sci., 16 (1981), pp. 1209-1216.
81. S. Das et al., Mater. Trans., JIM, 32 (2) (1991), pp. 189-194.
82. A.A. Baker, Mater. Sci. Eng., 17 (1975), p. 177.
83. F.A. Badia et al., AFS Trans., 79 (1971), p. 265.
84. V.G. Gorbunov et. al., Russ. Cast Prod., 8 (1974), p. 348.
85. K.G. Satyanarayana, Dev. of Proc. Of 32nd Intl. SAMPE Symp. (Warrendale, PA: SAE, 1987), pp. 880-888.
86. A. Banerji, M.K. Surappa, and P.K. Rohatgi, Metall. Trans., 14B (1983), pp. 273-283.
87. T.P. Murali, M.K. Surappa, and P.K. Rohatgi, Metall. Trans., 13B (1982), pp. 485-494.
88. J.U. Ejiofor and R.G. Reddy, Automotive Alloys (Warrendale, PA: TMS, 1997).
89. H. Ribes et al. Metall. Trans., 21A (1990), p. 2489.
90. P.K. Rohatgi, P.M. Yarandi, and Y.Liu, Cast Reinforced Metal Composites Proc. Of the Intl. Symp. on Advanced Cast Reinforced Metal Composites (Warrendale, PA: TMS, 1988), pp. 249-256.
91. H. Ribes and M. Suery, Scripta Metallurgica et Materialia, 23 (5) (1988), pp. 705-709.
92. M. Gupta, F. Mohammed, and E. Lavernia, Met. Trans., 23A (1992), pp. 831-843.
93. J. White et al., Aluminum-Lithium Alloys V, vol. 1, ed. T.H. Sanders, Jr. and E.A. Starke, Jr. (Bimingham, U.K.: Materials and Component Engineering Publications Ltd., 1989), p. 85.
94. T. Chanda et al., Aluminum-Lithium Alloys V, vol. 28, ed. T.H. Sanders, Jr. and E.A. Starke, Jr. (Bimingham, U.K.: Materials and Component Engineering Publications Ltd., 1989), p.47.
95. Y. Wu and E.J. Lavernia, Proc. of 3rd Intl. SAMPE Metals Conf, vol. 10 (Warrendale, PA: SAE, 1992), pp. M692-M704.
96. A.R.E. Singer, Mater. Sci. Eng., 135A (13) (1991).
97. S.G. Fishman, Proc. of a Symp. on In Situ Composites: Science and Technology, ed. M. Singh and D. Lewis (Warrendale, PA: TMS, 1993), pp. 1-19.
98. D. Lewis and M.Singh, Proc. of a Symp. on In Situ Composites: Science and Technology, 101, ed. M. Singh and D. Lewis (Warrendale, PA: TMS, 1993), pp. 21-36.
99. R.K. Viswanadham, S.K. Mannan, and B. Sprissler, Mater. Res. Soc. Symp. Proc., vol. 120 (Pittsburgh, PA: MRS, 1988), pp. 89-94.
100. T. Johnson, Materials and Processing Report, 4 (1) (1989), pp. 1-2.
101. V. Shtessel, S. Sampath, and M.Koczak, Materials and Processing Report, 101 (1) (1989), pp. 89-94.
102. D.M. Kocherginsky and R.G. Reddy, Proc. Control of Interfaces in Metal and Ceramics Composites (Warrendale, PA: TMS, 1994), pp. 71-79.
103. C.H. Henager, Jr. and J.L. Brimhall, Materials and Processing Report, 101 (1) (1989), pp. 89-94.
104. E. Ustundag et al., Materials and Processing Report, 101 (1) (1989), pp. 97-113.
105. I. Horsfall and M. Downing, Materials and Processing Report, 101 (1) (1989), pp. 149-157.
106. S.N. Sinha and M. Lam, Materials and Processing Report, 101 (1) (1989), pp. 183-191.
107. S.C. Farmer, A. Sayir and P.O. Dickerson, Materials and Processing Report, 101 (1) (1989), pp. 167-182.
108. S. Khatri et al., Materials and Processing Report, 101 (1) (1989), pp. 115-121.