Influence of surface treatments on the bond strength of repaired resin composite restorative materials

Dental Materials

Volumn 25, Issue 4, 2009, Pages 442-451

  Junior, Sinval A Rodrigues ^a   Ferracane, Jack L ^b   Bona, Álvaro Della ^c  

^a FEDERAL UNIVERSITY OF PELOTAS   (Brazil)

^b OREGON HEALTH AND SCIENCE UNIVERSITY   (United States)

^c UNIVERSITY OF PASSO FUNDO   (Brazil)

Author keywords

Adhesion; Composite resin; Microtensile bond strength; Repair; Surface treatment; Weibull statistics

Indexed keywords

ADHESION; ARCTIC ENGINEERING; BIOLOGICAL MATERIALS; BOND (MASONRY); BOND STRENGTH (MATERIALS); CARBON FIBER REINFORCED PLASTICS; CAVITY RESONATORS; DEIONIZED WATER; DENTAL COMPOSITES; DIAMONDS; HYDROFLUORIC ACID; HYDROXYLATION; MACHINERY; REPAIR; RESINS; SILANES; SILICA; STRENGTH OF MATERIALS; SURFACES; WATER TREATMENT;

ADHESIVE SYSTEMS; ALUMINA PARTICLES; BOND STRENGTHS; COMPOSITE RESIN; FILTEK SUPREME; FILTEK Z250; HYDROFLUORIC ACID ETCHINGS; MICROTENSILE BOND STRENGTH; PRECISION GRINDING MACHINES; PROFILOMETER; RESIN COMPOSITES; SILICA COATINGS; SURFACE COATINGS; TREATMENT GROUPS; WEIBULL STATISTICS;

SURFACE TREATMENT;

ALUMINUM OXIDE; BIOMATERIAL; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; FILTEK SUPREME; FILTEK Z250; NANOCOMPOSITE; RESIN; RESIN CEMENT; SILANE DERIVATIVE; SILICON DIOXIDE; SINGLE BOND PLUS;

ARTICLE; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; MATERIALS TESTING; RANDOMIZATION; SURFACE PROPERTY; SURVIVAL; TENSILE STRENGTH; TOOTH PROSTHESIS;

ACID ETCHING, DENTAL; ALUMINUM OXIDE; BISPHENOL A-GLYCIDYL METHACRYLATE; COATED MATERIALS, BIOCOMPATIBLE; COMPOSITE RESINS; DENTAL BONDING; DENTAL PROSTHESIS REPAIR; DENTAL RESTORATION, PERMANENT; DENTAL STRESS ANALYSIS; MATERIALS TESTING; NANOCOMPOSITES; RANDOM ALLOCATION; RESIN CEMENTS; SILANES; SILICON DIOXIDE; SURFACE PROPERTIES; SURVIVAL ANALYSIS; TENSILE STRENGTH;

EID: 60449084813     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.09.009     Document Type: Article

References (37)

1. Bagheri R., Tyas M.J., and Burrow M.F. Subsurface degradation of resin-based composites. Dent Mater 23 (2007) 944-951
2. Jaffer F., Finer Y., and Santerre J.P. Interactions between resin monomers and commercial composite resins with human saliva derived esterases. Biomaterials 23 (2002) 1707-1719
3. Ferracane J.L. Elution of leachable components from composites. J Oral Rehabil 21 (1994) 441-452
4. Örtengren U., Wellendorf H., Karlsson S., and Ruyter I. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Rehabil 28 (2001) 1106-1115
5. Gröger G., Rosentritt M., Behr M., Schröder J., and Handel G. Dental resin materials in vivo-TEM results after one year: a pilot study. J Mater Sci Mater Med 17 (2006) 825-828
6. Ferracane J.L. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater 22 (2006) 211-222
7. Ferracane J.L., and Marker V.A. Solvent degradation and reduced fracture toughness in aged composites. J Dent Res 1 (1992) 13-19
8. Sideridou I., Tserki V., and Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials 24 (2003) 655-665
9. Kalachandra S. Influence of fillers on the water sorption of composites. Dent Mater 5 (1989) 283-288
10. Hannig C., Sebastian L., Hahn P., and Attin T. Shear bond strength of repaired adhesive filling materials using different repair procedures. J Adhes Dent 8 (2006) 35-40
11. Brosh T., Bichacho N., and Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent 77 (1997) 122-126
12. Özcan M., Alander P., Vallittu P.K., Huysmans M.C., and Kalk W. Effect of three surface conditioning methods to improve bond strength of particulate filler resin composites. J Mater Sci Mater Med 16 (2005) 21-27
13. Bouschlicher M.R., Reinhardt J.W., and Vargas M.A. Surface treatment techniques for resin composite repair. Am J Dent 10 (1997) 279-283
14. Bonstein T., Garlapo D., Donarummo J., and Bush P.J. Evaluation of varied repair protocols applied to aged composite resin. J Adhes Dent 7 (2005) 41-49
15. Shahdad S.A., and Kennedy J.G. Bond strength of repaired anterior composite resins: an in vitro study. J Dent 26 (1998) 685-694
16. Tezvergil A., Lassila L.V.J., and Vallittu P.K. Composite-composite repair bond strength: effect of different adhesion primers. J Dent 31 (2003) 521-525
17. Özcan M., Barbosa S.H., Melo R.M., Galhano G.A.P., and Botino M.A. Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions. Dent Mater 23 (2007) 1276-1282
18. Della Bona A., Donassollo T.A., Demarco F.F., Barrett A.A., and Mecholsky Jr. J.J. Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia reinforced ceramic. Dent Mater 23 (2007) 769-775
19. Blum I.R., Schriever A., Heidemann D., Mjör I.A., and Wilson N.H.F. The repair of direct composite restorations: An international survey of the teaching of operative techniques and materials. Eur J Dent Educ 7 (2003) 41-48
20. Boscato N., Della Bona A., and Cury A.A.D.B. Influence of ceramic pre-treatments on tensile bond strength and mode of failure of resin bonded to ceramics. Am J Dent 20 (2007) 103-108
21. Della Bona A., Anusavice K.J., and Mecholsky Jr. J.J. Failure analysis of resin composite bonded to ceramic. Dent Mater 19 (2003) 693-699
22. Yoshida Y., Shirai K., Shintani H., Okazaki M., Suzuki K., and Van Meerbeek B. Effect of presilanization filler decontamination on aesthetics and degradation resistance of resin composites. Dent Mater J 21 (2002) 383-395
23. Papacchini F., Dall'Oca S., Chieffi N., Goracci C., Sadek F.T., Suh B.I., et al. Composite-to-composite microtensile bond strength in the repair of a microfilled hybrid resin: effect of surface treatment and oxygen inhibition. J Adhes Dent 9 (2007) 25-31
24. Mitra S.B., Wu D., and Holmes B.N. An application of nanotechnology in advanced dental materials. J Am Dent Assoc 134 (2003) 1382-1390
25. Dickens S.H., and Cho B.H. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents. Dent Mater 21 (2005) 254-264
26. International Standards Organization ISO 11405. Dental materials-testing of adhesion to tooth structure; 2003.
27. McCabe J.F., and Carrick T.E. A statistical approach to the mechanical testing of dental materials. Dent Mater 2 (1986) 139-142
28. Drummond J.L., and Miescke K.J. Weibull models for the statistical analysis of dental composite data: aged in physiologic media and cyclic-fatigued. Dent Mater 7 (1991) 25-29
29. Burrow M.F., Thomas D., Swain M.V., and Tyas M.J. Analysis of tensile bond strength using Weibull statistics. Biomater 25 (2004) 5031-5035
30. Ritter J.E. Critique of test methods for lifetime predictions. Dent Mater 11 (1995) 147-151
31. Ferrari M., Goracci C., Sadek F., and Cardoso P.E.C. Microtensile bond strength tests: scanning electron microscopy evaluation of sample integrity before testing. Eur J Oral Sci 110 (2002) 385-391
32. Goracci C., Sadek F.T., Monticelli F., Cardoso P.E.C., and Ferrari M. Influence of substrate, shape, and thickness on microtensile specimens' structural integrity and their measured bond strengths. Dent Mater 20 (2004) 643-654
33. Pashley D.H., Carvalho R.M., Sano H., Nakajima M., Yoshiyama M., Shono Y., et al. The microtensile bond test: a review. J Adhes Dent 1 (1999) 299-309
34. Della Bona A., Anusavice K.J., and Shen C. Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2 (2000) 305-313
35. Armstrong S.R., Keller J.C., and Boyer D.B. Mode of failure in the dentin-adhesive resin-resin composite bonded joint as determined by strength-based (μTBS) and fracture-based (CNSB) mechanical testing. Dent Mater 17 (2001) 201-210
36. Øilo G. Bond strength testing-what does it mean?. Int Dent J 43 (1993) 492-498
37. Della Bona A., Anusavice K.J., and Hood J.A.A. Effect of ceramic surface treatment on tensile bond strength to a resin cement. Int J Prosthodont 15 (2002) 248-325