Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions

Dental Materials

Volumn 23, Issue 10, 2007, Pages 1276-1282

  Özcan, Mutlu ^a   Barbosa, Silvia Helena ^b   Melo, Renata Marques ^b   Galhano, Graziela Ávila Prado ^b   Bottino, Marco Antonio ^b  

^a UNIVERSITY MEDICAL CENTER GRONINGEN   (Netherlands)

^b SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

Author keywords

Aging process; Repair; Resin composite; Silica coating; Surface conditioning

Indexed keywords

AGING OF MATERIALS; BOND STRENGTH (MATERIALS); CITRIC ACID; PH; RESINS; TENSILE STRENGTH;

AGING PROCESSES; RESIN COMPOSITES; SILICA COATING; SURFACE CONDITIONING;

DENTAL COMPOSITES;

ACRYLIC ACID RESIN; COMPOSITE DENTAL RESIN; POLYURETHAN; RESIN; SILANE DERIVATIVE; SILICON DIOXIDE; UNCLASSIFIED DRUG;

ARTICLE; CHEMISTRY; DENTAL BONDING; HEAT; METHODOLOGY; SURFACE PROPERTY; TENSILE STRENGTH; TIME;

ACRYLIC RESINS; COMPOSITE RESINS; DENTAL BONDING; HEAT; POLYURETHANES; SILANES; SILICON DIOXIDE; SURFACE PROPERTIES; TENSILE STRENGTH; TIME FACTORS;

EID: 34547798626     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2006.11.007     Document Type: Article

References (44)

1. Gordan V.V., Mjør I.A., Blum I.R., and Wilson N. Teaching students the repair of resin-based composite restorations: a survey of North American dental schools. J Am Dent Assoc 134 (2003) 317-323
2. Mjør I.A. Placement and replacement of restorations. Oper Dent 6 (1981) 49-54
3. Mjør I.A., Moorhead J.E., and Dahl J.E. Selection of restorative materials in permanent teeth in general dental practice. Acta Odontol Scand 57 (1999) 257-262
4. Ferracane J.L. Elution of leachable components from composites. J Oral Rehabil 21 (1994) 441-452
5. Ortengren U., Wellendorf H., Karlsson S., and Ruyter I.E. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Rehabil 28 (2001) 1106-1115
6. Søderholm K.J., and Roberts M.J. Variables influencing the repair strength of dental composites. Scand J Dent Res 99 (1991) 173-180
7. Frankenberger R., Kramer N., Ebert J., Lohbauer U., Kappel S., ten Weges S., et al. Fatigue behavior of the resin-resin bond of partially replaced resin-based composite restorations. Am J Dent 16 (2003) 17-22
8. Vankerckhoven H., Lambrechts P., van Beylen M., Davidson C.L., and Vanherle G. Unreacted methacrylate groups on the surfaces of composite resins. J Dent Res 61 (1982) 791-795
9. Sau C.W., Oh G.S., Koh H., Chee C.S., and Lim C.C. Shear bond strength of repaired composite resins using a hybrid composite resin. Oper Dent 24 (1999) 156-161
10. Boyer D.B., Chan K.C., and Reinhardt J.W. Build-up and repair of light-cured composites: bond strength. J Dent Res 63 (1984) 1241-1244
11. Swift Jr. E.J., LeValley B.D., and Boyer D.B. Evaluation of new methods for composite repair. Dent Mater 8 (1992) 362-365
12. Azarbal P., Boyer D.B., and Chan K.C. The effect of bonding agents on the interfacial bond strength of repaired composites. Dent Mater 2 (1986) 153-155
13. Frankenberger R., Kramer N., and Sindel J. Repair strength of etched vs. silica-coated metal-ceramic and all-ceramic restorations. Oper Dent 25 (2000) 209-215
14. Swift Jr. E.J., Cloe B.C., and Boyer D.B. Effect of a silane coupling agent on composite repair strengths. Am J Dent 7 (1994) 200-202
15. Lloyd C.H., Baigrie D.A., and Jeffrey I.W. The tensile strength of composite repairs. J Dent 8 (1980) 171-177
16. Oztas N., Alacam A., and Bardakci Y. The effect of air abrasion with two new bonding agents on composite repair. Oper Dent 28 (2003) 149-154
17. Guggenberger R. Rocatec system-adhesion by tribochemical coating. Dtsch Zahnarztl Z 44 (1989) 874-876
18. Özcan M. The use of chairside silica coating for different dental applications: a clinical report. J Prosthet Dent 87 (2002) 469-472
19. Özcan M. Evaluation of alternative intra-oral repair techniques for fractured ceramic-fused-to-metal restorations. J Oral Rehabil 30 (2003) 194-203
20. Lewis G., Johnson W., Martin W., Canerdy A., Claburn C., and Collier M. Shear bond strength of immediately repaired light-cured composite resin restorations. Oper Dent 23 (1998) 121-127
21. Yap A.U., Sau C.W., and Lye K.W. Effects of aging on repair bond strengths of a polyacid-modified composite resin. Oper Dent 24 (1999) 371-376
22. Mohsen N.M., and Craig R.G. Hydrolytic stability of silanated zirconia-silica-urethane dimethacrylate composites. J Oral Rehabil 22 (1995) 213-220
23. Shahdad S.A., and Kennedy J.G. Bond strength of repaired anterior composite resins: an in vitro study. J Dent 26 (1998) 685-694
24. Della Bona A., and Van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res 74 (1995) 1591-1596
25. Versluis A., Tantbirojn D., and Douglas W.H. Why do shear bond tests pull out dentin?. J Dent Res 76 (1997) 1298-1307
26. Sano H., Shono T., Sonoda H., Takatsu T., Ciucchi B., and Carvalho R.M. Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent Mater 10 (1994) 236-240
27. Denehy G., Bouschlicher M., and Vargas M. Intraoral repair of cosmetic restorations. Dent Clin North Am 42 (1998) 719-737
28. Özcan M., Lassila L., Raadschelders J., Matinlinna J.P., and Vallittu P.K. Effect of some parameters on silica-deposition on a zirconia ceramic. J Dent Res 84 (2005) (Abstract# 63114)
29. Bouschlicher M.R., Reinhardt J.W., and Vargas M.A. Surface treatment techniques for resin composite repair. Am J Dent 10 (1997) 279-283
30. Matinlinna J.P., Lassila L.V., Özcan M., Yli-Urpo A., and Vallittu P.K. An introduction to silanes and their clinical applications in dentistry. Int J Prosthodont 17 (2004) 155-164
31. Hisamatsu N., Atsuta M., and Matsumura H. Effect of silane primers and unfilled resin bonding agents on repair bond strength of a prosthodontic microfilled composite. J Oral Rehabil 29 (2002) 644-648
32. Brendeke J., and Özcan M. Effect of physico-chemical aging conditions on the composite repair strength. J Dent Res 84 (2005) (Abstract# 351)
33. Cesar P.F., Meyer Faara P.M., Miwa Caldart R., Gastaldoni Jaeger R., and da Cunha Ribeiro F. Tensile bond strength of composite repairs on Artglass using different surface treatments. Am J Dent 14 (2001) 373-377
34. Kula K., Nelson S., Kula T., and Thompson V. In vitro effect of acidulated phosphate fluoride gel on the surface of composites with different filler particles. J Prosthet Dent 56 (1986) 161-169
35. Chan K.C., and Boyer D.B. Repair of conventional and microfilled composite resins. J Prosthet Dent 50 (1983) 345-350
36. Dias W.R., Ritter A.V., and Swift Jr. E.J. Repairability of a packable resin-based composite using different adhesives. Am J Dent 16 (2003) 181-185
37. Oysaed H., Ruyter I.E., and Sjovik Kleven I.J. Release of formaldehyde from dental composites. J Dent Res 67 (1988) 1289-1294
38. Ferracane J.L., Berge H.X., and Condon J.R. In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler/matrix coupling. J Biomed Mater Res 42 (1998) 465-472
39. Wu W., and McKinney J.E. Influence of chemicals on wear of dental composites. J Dent Res 61 (1982) 1180-1183
40. Özcan M., Alander P., Vallittu P.K., Huysmans M.C., and Kalk W. Effect of three surface conditioning methods to improve bond strength of particulate filler resin composites. J Mater Sci Mater Med 16 (2005) 21-27
41. Søderholm K.J., Zigan M., Ragan M., Fischlschweiger W., and Bergman M. Hydrolytic degradation of dental composites. J Dent Res 63 (1984) 1248-1254
42. Floyd C.J., and Dickens S.H. Network structure of Bis-GMA- and UDMA-based resin systems. Dent Mater 20 (2005) [Epub ahead of print]
43. Lovell L.G., Lu H., Elliott J.E., Stansbury J.W., and Bowman C.N. The effect of cure rate on the mechanical properties of dental resins. Dent Mater 17 (2001) 504-511
44. Özcan M. Adhesion of resin composites to biomaterials in dentistry: an evaluation of surface conditioning methods (2003), Groningen, The Netherlands. 90-367-1942-9 pp. 109-124 and 125-140