Microstructural and tribological investigation of high-velocity suspension flame sprayed (HVSFS) Al 2O 3 coatings

Journal of Thermal Spray Technology

Volumn 18, Issue 1, 2009, Pages 35-49

  Bolelli, Giovanni ^a   Rauch, Johannes ^b   Cannillo, Valeria ^a   Killinger, Andreas ^b   Lusvarghi, Luca ^a   Gadow, Rainer ^b  

^a UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

^b UNIVERSITY OF STUTTGART   (Germany)

Author keywords

HVSFS; NanoAl 2O 3; Suspension flame spraying; Wear resistance

Indexed keywords

ATMOSPHERIC PLASMAS; CONVENTIONAL COATINGS; DRY SLIDING WEARS; ELECTRO-CHEMICAL IMPEDANCES; HIGH VELOCITIES; HVSFS; INTRALAMELLAR CRACKS; MICRO-MECHANICAL BEHAVIORS; MICRO-STRUCTURAL; MICROSTRUCTURAL CHARACTERISTICS; NANO POWDERS; NANOAL 2O 3; NANOPOWDER SUSPENSIONS; PORE INTERCONNECTIVITY; ROOM TEMPERATURES; SUSPENSION FLAME SPRAYING; TRIBOLOGICAL PROPERTIES;

ALUMINUM; COATINGS; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; FLAME RESISTANCE; FLAME SPRAYING; FLAMMABILITY; NANOSTRUCTURED MATERIALS; OXYGEN; PESTICIDES; PLASMA SPRAYING; PROTECTIVE COATINGS; SUSPENSIONS (COMPONENTS); TRIBOLOGY;

WEAR RESISTANCE;

EID: 59849123291     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9279-9     Document Type: Article

References (55)

1. L. Xie, X. Ma, E.H. Jordan, N.P. Padture, D.T. Xiao, and M. Gell, Deposition of thermal barrier coatings using the solution precursor plasma spray process, J. Mater. Sci., 2004, 39, p 1639-1646.
2. E.H. Jordan, L. Xie, X. Ma, M. Gell, N.P. Padture, B. Cetegen, A. Ozturk, J. Roth, T.D. Xiao, and P.E.C. Bryant, Superior Thermal Barrier Coatings Using Solution Precursor Plasma Spray, J. Thermal Spray Technol., 2004,13, p 57-65.
3. L. Xie, X. Ma, A. Ozturk, E.H. Jordan, N.P. Padture, B.M. Cetegen, D.T. Xiao, and M. Gell, Processing parameter effects on solution precursor plasma spray process spray patterns, Surf. Coat. Technol., 2004, 183, p 51-61.
4. R. Rampon, F.-L. Toma, G. Bertrand, and C. Coddet, Liquid Plasma Sprayed Coatings of Yttria-Stabilized Zirconia for SOFC Electrolytes, J. Thermal Spray Technol., 2006, 15, p 682-688.
5. 3 perovskite thin films by suspension plasma spraying for SOFC cathodes, Surf. Coat. Technol., 2006, 200, p 3743-3756.
6. F-L. Toma, G. Bertrand, D. Klein, C. Coddet, and C. Meunier, Nanostructured Photocatalytic Titania Coatings Formed by Suspension Plasma Spraying, J. Thermal Spray Technol., 2006, 15, p 587-592.
7. 2-supported photocatalysts obtained by suspension plasma spraying, Appl. Catal. B, 2006, 68, p 74-84.
8. A. Killinger, M. Kuhn, and R. Gadow, High-Velocity Suspension Flame Spraying (HVSFS), a new approach for spraying nanoparticles with hypersonic speed, Surf. Coat. Technol., 2006, 201, p 1922-1929.
9. X.Q. Ma, J. Roth, D.W. Gandy, and G.J. Frederick, A New High-Velocity Oxygen Fuel Process for Making Finely Structured and Highly Bonded Inconel Alloy Layers from Liquid Feedstock, J. Thermal Spray Technol., 2006, 15, p 670-675.
10. H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, and D. Stoever, Application of Suspension Plasma Spraying (SPS) for Manufacture of Ceramic Coatings, J. Thermal Spray Technol., 2008, 17, p 115-123.
11. P. Fauchais, R. Etchart-Salas, V. Rat, J.F. Coudert, N. Caron, and K. Wittmann-Ténèze, Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or Suspensions, J. Thermal Spray Technol., 2008, 17, p 31-59.
12. B.G. Ravi, A.S. Gandhi, X.Z. Guo, J. Margolies and S. Sampath, Liquid Precursor Plasma Spraying of Functional Materials: A Case Study for Yttrium Aluminum Garnet (YAG), J. Thermal Spray Technol., 2008, 17, p 82-90.
13. M. Gell, E.H. Jordan, M. Teicholz, B.M. Cetegen, N. Padture, Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray Process, J. Thermal Spray Technol., 2008, 17, p 124-135.
14. A. Wank, B. Wielage, H. Pokhmurska, E. Friesen, and G. Reisel, Comparison of hardmetal and hard chromium coatings under different tribological conditions, Surf. Coat. Technol., 2006, 201, p 1975-1980.
15. P. Fauchais, Understanding plasma spraying, J. Phys. D: Appl. Phys., 2004, 37, p R86-R108.
16. R. Gadow, A. Killinger, and J. Rauch, New Results in High Velocity Suspension Flame Spraying (HVSFS), Surf. Coat. Technol., 2008, 202 (18), p 4329-4336
17. J. Stokes, The Theory and Application of the HVOF Thermal Spray Process, available on-line at http://webpages.dcu.ie/∼stokesjt/ ThermalSpraying/Book/HVOFThermalSpraying.htm, p 54-66
18. J.R. Davis, Surface engineering for corrosion and wear resistance, ASM International, Materials Park, OH, USA, 2002, p 192-193.
19. G. Bolelli, J. Rauch, V. Cannillo, A. Killinger, L. Lusvarghi, and R. Gadow, Preliminary investigation of HVSFS deposited glass coatings, Mater. Lett., 2008, 62, p 2772-2775.
20. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park, OH, USA, 2004, p 175-213.
21. A. Kulkarni, S. Sampath, A. Goland, H. Herman, and B. Dowd, Computed Microtomography Studies to Characterize Microstructure-Property Correlations in Thermal Sprayed Alumina Deposits, Scr. Mater., 2000, 43, p 471-476.
22. G. Antou, G. Montavon, F. Hlawka, A. Cornet, and C. Coddet, Characterizations of the pore-crack network architecture of thermal-sprayed coatings, Mater. Charact., 2004, 53, p 361-372.
23. F-I. Trifa, G. Montavon, C. Coddet, P. Nardin, and M. Abrudeanu, Geometrical features of plasma-sprayed deposits and their characterization methods, Mater. Charact., 2005, 54, p 157-175.
24. C.-J. Li, and A. Ohmori, Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, J. Thermal Spray Technol., 2002, 11, p 365-374.
25. R. Westergård, L.C. Erickson, N. Axén, H.M. Hawthorne, and S. Hogmark, The erosion and abrasion characteristics of alumina coatings plasma sprayed under different spraying conditions, Tribol. Int., 1998, 31, p 271-279.
26. H.M. Hawthorne, L.C. Erickson, D. Ross, H. Tai, and T. Troczynski, The microstructural dependence of wear and indentation behaviour of some plasma-sprayed alumina coatings, Wear, 1997, 203-204, p 709-714.
27. G. Bolelli, V. Cannillo, L. Lusvarghi, and T. Manfredini, Wear behaviour of thermally sprayed ceramic oxide coatings, Wear, 2006, 261, p 1298-1315.
28. G. Bolelli, L. Lusvarghi, T. Manfredini, F. Pighetti Mantini, R. Polini, E. Turunen, T. Varis, and S-P. Hannula, Comparison between plasma- and HVOF sprayed ceramic coatings. Part I: Microstructure and mechanical properties, Int. J. Surface Science and Engineering, 2007, 1, p 38-61.
29. H. Du, J. H. Shin, and S.W. Lee, Study on Porosity of Plasma Sprayed Coatings by Digital Image Analysis Method, J. Thermal Spray Technol. 2005, 14, p 453-461.
30. G. Antou, G. Montavon, F. Hlawka, A. Cornet, and C. Coddet, Exploring Thermal Spray Gray Alumina Coating Pore Network Architecture by Combining Stereological Protocols and Impedance Electrochemical Spectroscopy, J. Thermal Spray Technol., 2006, 15, p 765-772.
31. J. Zhang, and V. Desai, Evaluation of thickness, porosity and pore shape of plasma sprayed TBC by electrochemical impedance spectroscopy, Surf. Coat. Technol., 2005, 190, p 98-109.
32. W.C. Oliver, and G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 1992, 7, p 1564-1583.
33. L. Bianchi, A. Denoirjean, F. Blein, and P. Fauchais, Microstructural investigation of plasma-sprayed ceramic splats, Thin Solid Films, 1997, 299, p 125-135.
34. R.J. Damani, and A. Wanner, Microstructure and elastic properties of plasma-sprayed alumina, J. Mater. Sci., 2000, 35, p 4307-4318.
35. A. Kulkarni, J. Gutleber, S. Sampath, A. Goland, W.B. Lindquist, H. Herman, A.J. Allen, and B. Dowd, Studies of the microstructure and properties of dense ceramic coatings produced by high-velocity oxygen-fuel combustion spraying, Mater. Sci. Eng. A, 2004, 369, p 124-137.
36. L. Li, B. Kharas, H. Zhang, and S. Sampath, Suppression of crystallization during high velocity impact quenching of alumina droplets: Observations and characterization, Mater. Sci. Eng. A, 2007, 456, p 35-42.
37. S. Basu and B.M. Cetegen, Modeling of Liquid Ceramic Precursor Droplets in a High Velocity Oxy-Fuel Flame Jet, Acta Mater., 2008, 56 (12), p 2750-2759
38. S. Basu, E.H. Jordan, and B.M. Cetegen, Fluid Mechanics and Heat Transfer of Liquid Precursor Droplets Injected into High-Temperature Plasmas, J. Thermal Spray Technol., 2008, 17, p 60-72.
39. J. Fazilleau, C. Delbos, V. Rat, J.F. Coudert, P. Fauchais, and B. Pateyron, Phenomena Involved in Suspensions Plasma Spraying. Part 1: Suspensions Injection and Behaviour, Plasma Chem. Plasma Process., 2006, 26, p 371-391.
40. J. Fazilleau, C. Delbos, V. Rat, J.F. Coudert, P. Fauchais, and B. Pateyron, Phenomena Involved in Suspensions Plasma Spraying. Part 2: Zirconia Particle Treatment and Coating Formation, Plasma Chem. Plasma Process., 2006, 26, p 393-414.
41. J. Oberste Berghaus, J-G. LegC. Moreau, F. Tarasi, and T. Chráska, Mechanical and Thermal Transport Properties of Suspension Thermal-Sprayed Alumina-Zirconia Composite Coatings, J. Thermal Spray Technol., 2008, 17, p 91-104.
42. S. Ghosh, S. Das, T.K. Bandyopadhyay, P.P. Bandyopadhyay, and A.B. Chattopadhyay, Indentation responses of plasma sprayed ceramic coatings, J. Mater. Sci., 2003, 38, p 1565-1572.
43. L. Prchlik, and S. Sampath, Effect of the microstructure of thermally sprayed coatings on friction and wear response under lubricated and dry sliding conditions, Wear, 2007, 262, p 11-23.
44. 2, Mater. Lett., 2008, 62, p 1557-1560.
45. K. Duan, and R.W. Steinbrech, Influence of Sample Deformation and Porosity On Mechanical Properties by Instrumented Microindentation Technique, J. Eur. Ceram. Soc., 1998, 18, p 87-93.
46. K. Hokkirigawa, Wear mode map of ceramics, Wear, 1991,151, p 219-228.
47. K. Kato, and K. Adachi, Wear of advanced ceramics, Wear, 2002, 253, p 1097-1104.
48. H-S. Ahn, and O-K. Kwon, Tribological behaviour of plasma-sprayed chromium oxide coating, Wear, 1999, 225-229, p 814-824.
49. Y. Jin, and Y. Yang, Tribological behaviour of various plasma-sprayed ceramic coatings, Surf. Coat. Technol., 1996, 88, p 248-254.
50. G. Bolelli, L. Lusvarghi, T. Manfredini, F. Pighetti Mantini, E. Turunen, T. Varis, and S-P. Hannula, Comparison between plasma- and HVOF-sprayed ceramic coatings. Part II: Tribological behaviour, Int. J. Surface Science and Engineering, 2007, 1, p 62-79.
51. Y. Xie, and H.M. Hawthorne, The damage mechanisms of several plasma sprayed ceramic coatings in controlled scratching, Wear, 1999, 233-235, p 293-305.
52. K.G. Budinsky, Abrasion resistance of transport roll surfaces, Wear, 1995, 181-183, p 938-943.
53. R.B. Heimann, Applications of Plasma-Sprayed Ceramic Coatings, Key Eng. Mater., 1996, 122-124, p 399-442.
54. 3-Coatings on Anilox Rolls, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau, Eds., May 5-8, 2003 (Orlando, FL), ASM International, 2003, p 149-152
55. State of California Air Resources Board, Resolution 04-44, December 9, 2004; available on-line at: http://www.arb.ca.gov/regact/thermspr/ res0444.pdf