Effect of light-cured filled sealant on shear bond strength of metal and ceramic brackets bonded with a resin-modified glass ionomer cement

American Journal of Orthodontics and Dentofacial Orthopedics

Volumn 135, Issue 2, 2009, Pages 194-198

  Varlik, Selin Kale ^a   Ulusoy, Çaǧri ^a  

^a GAZI UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

ACRYLIC ACID RESIN; ALUMINUM SILICATE; DENTAL ALLOY; FUJI ORTHO LC; GLASS IONOMER; PHOSPHORIC ACID; PRO SEAL; RESIN CEMENT; WATER;

ARTICLE; CERAMICS; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL ACID ETCHING; DENTAL BONDING; ENAMEL; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; ORTHODONTIC DEVICE; ORTHODONTICS; PATHOLOGY; RANDOMIZED CONTROLLED TRIAL; SHEAR STRENGTH; SURFACE PROPERTY; TEMPERATURE; TIME;

ACID ETCHING, DENTAL; ACRYLIC RESINS; ALUMINUM SILICATES; CERAMICS; DENTAL ALLOYS; DENTAL BONDING, LIGHT-CURED; DENTAL ENAMEL; GLASS IONOMER CEMENTS; HUMANS; MATERIALS TESTING; ORTHODONTIC APPLIANCE DESIGN; ORTHODONTIC BRACKETS; PHOSPHORIC ACIDS; RESIN CEMENTS; SHEAR STRENGTH; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; WATER;

EID: 59349092814     PISSN: 08895406     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ajodo.2007.12.024     Document Type: Article

References (40)

1. Gorelick L., Geiger A.M., and Gwinnett A.J. Incidence of white spot formation after bonding and banding. Am J Orthod 81 (1982) 93-98
2. Mizrahi E. Surface distribution of enamel opacities following orthodontic treatment. Am J Orthod 84 (1983) 323-331
3. Årtun J., and Brobakken B.O. Prevalence of carious white spots after orthodontic treatment with multibonded appliances. Eur J Orthod 8 (1986) 229-234
4. O'Reilly M.M., and Featherstone J.D. Demineralization and remineralization around orthodontic appliances: an in vivo study. Am J Orthod Dentofacial Orthop 92 (1987) 33-40
5. Geiger A.M., Gorelick L., Gwinnett A.J., and Griswold P.G. The effect of a fluoride program on white spot formation during orthodontic treatment. Am J Orthod Dentofacial Orthop 93 (1988) 29-37
6. Geiger A.M., Gorelick L., Gwinnett A.J., and Benson B.J. Reducing white spot lesions in orthodontic population with fluoride rinsing. Am J Orthod Dentofacial Orthop 101 (1992) 403-407
7. Øgaard B., Rølla G., Arends J., and ten Cate J.M. Orthodontic appliances and enamel demineralization. Part 2.Prevention and treatment of lesions. Am J Orthod Dentofacial Orthop 94 (1988) 123-128
8. Boyd R.L. Comparison of three self-applied topical fluoride preparations for control of decalcification. Angle Orthod 63 (1993) 25-30
9. Schmit J.L., Staley R.N., Wefel J.S., Kanellis M., Jakobsen J.R., and Keenan P.J. Effect of fluoride varnish on demineralization adjacent to brackets bonded with RMIG cement. Am J Orthod Dentofacial Orthop 122 (2002) 125-134
10. Hotz P., McLean J.W., Sced I., and Wilson A.D. The bonding of glass ionomer cements to metal and tooth substrates. Br Dent J 142 (1977) 41-47
11. Cook P.A., and Youngson C.C. An in vitro study of the bond strength of a glass ionomer cement in the direct bonding of orthodontic brackets. Br J Orthod 15 (1988) 247-253
12. Zachrisson B.U., Heimgård E., Ruyter I.E., and Mjor I.A. Problems with sealants for bracket bonding. Am J Orthod 75 (1979) 641-649
13. Ceen R.F., and Gwinnett A.J. Microscopic evaluation of the thickness of sealants used in orthodontic bonding. Am J Orthod 78 (1980) 623-629
14. Joseph V.P., Rossouw P.E., and Basson N.J. Some "sealants" seal-a scanning electron microscopy (SEM) investigation. Am J Orthod Dentofacial Orthop 105 (1994) 362-368
15. Frazier M.C., Southard T.E., and Doster P.M. Prevention of enamel demineralization during orthodontic treatment: an in vitro study using pit and fissure sealants. Am J Orthod Dentofacial Orthop 110 (1996) 459-465
16. Banks P.A., and Richmond S. Enamel sealants: a clinical evaluation of their value during fixed appliance therapy. Eur J Orthod 16 (1994) 19-25
17. Wenderoth C.J., Weinstein M., and Borislow A.J. Effectiveness of a fluoride-releasing sealant in reducing decalcification during orthodontic treatment. Am J Orthod Dentofacial Orthop 166 (1999) 629-634
18. Bishara S.E., Oonsombat C., Soliman M.M., and Warren J. Effects of using a new protective sealant on the bond strength of orthodontic brackets. Angle Orthod 75 (2005) 243-246
19. Hu W., and Featherstone J.D. Prevention of enamel demineralization: an in-vitro study using light-cured filled sealant. Am J Orthod Dentofacial Orthop 128 (2005) 592-600
20. McCourt J.W., Cooley R.L., and Barnwell S. Bond strength of light-cured fluoride-releasing base liners as orthodontic bracket adhesives. Am J Orthod Dentofacial Orthop 100 (1991) 47-52
21. Forss H. Release of fluoride and other elements from light-cured glass ionomers in neutral and acidic conditions. J Dent Res 72 (1993) 1257-1262
22. Meehan M.P., Foley T.F., and Mamandras A.H. A comparison of the shear bond strengths of two glass ionomer cements. Am J Orthod Dentofacial Orthop 115 (1999) 125-132
23. Lippitz S.J., Staley R.N., and Jakobsen J.R. In vitro study of 24-hour and 30-day shear bond strengths of three resin-glass ionomer cements used to bond orthodontic brackets. Am J Orthod Dentofacial Orthop 113 (1998) 420-424
24. Choo S.C., Ireland A.J., and Sherriff M. An in vivo investigation into the use of resin-modified glass poly (alkeonate) cements as orthodontic bonding agents. Eur J Orthod 23 (2001) 403-409
25. Summers A., Kao E., Gilmore J., Gunel E., and Ngan P. Comparison of bond strength between a conventional resin adhesive and a resin-modified glass ionomer adhesive: an in vitro and in vivo study. Am J Orthod Dentofacial Orthop 126 (2004) 200-206
26. Chitnis D., Dunn W.J., and Gonzales D.A. Comparison of in-vitro bond strengths between resin-modified glass ionomer, polyacid-modified composite resin, and giomer adhesive systems. Am J Orthod Dentofacial Orthop 129 (2006) 330 e11-6
27. Pithon M.M., dos Santos R.L., de Oliveira M.V., Ruellas A.C.O., and Romano F.L. Metallic brackets bonded with resin-reinforced glass ionomer cements under different enamel conditions. Angle Orthod 76 (2006) 700-704
28. Cacciafesta V., Sfondrini M.F., Calvi D., and Scribante A. Effect of fluoride application on shear bond strength of brackets bonded with a resin-modified glass ionomer. Am J Orthod Dentofacial Orthop 127 (2005) 580-583
29. Godoy-Bezerra J., Vieira S., Oliveira J.H.G., and Lara F. Shear bond strength of resin-modified glass ionomer cement with saliva present and different enamel pretreatments. Angle Orthod 76 (2006) 470-474
30. Flores A.R., Sáez E.G., and Barceló F. Metallic bracket to enamel bonding with a photopolymerizable resin-reinforced glass ionomer. Am J Orthod Dentofacial Orthop 116 (1999) 514-517
31. Bishara S.E., VonWald L., Laffoon J.F., and Jakobsen J.R. Effect of changing enamel conditioner concentration on the shear bond strength of a resin-modified glass ionomer adhesive. Am J Orthod Dentofacial Orthop 118 (2000) 311-316
32. Bishara S.E., VonWald L., Laffoon J.F., and Jakobsen J.R. Effect of altering the type of enamel conditioner on the shear bond strength of a resin-reinforced glass ionomer adhesive. Am J Orthod Dentofacial Orthop 118 (2000) 288-294
33. Larmour C.J., and Stirrups D.R. An ex-vivo assessment of a resin-modified glass ionomer cement in relation to bonding technique. J Orthod 28 (2001) 207-210
34. Cacciafesta V., Sfondrini M.F., Scribante A., De Angelis M., and Klersy C. Effect of blood contamination on shear bond strength of brackets bonded with a self-etching primer combined with a resin-modified glass ionomer. Am J Orthod Dentofacial Orthop 126 (2004) 703-708
35. Haydar B., Sari{dotless}kaya S., and Cehreli Z.C. Comparison of shear bond strength of three bonding agents with metal and ceramic brackets. Angle Orthod 69 (1999) 475-62
36. Hitmi L., Muller C., Mujajic C.M., and Attal J.P. An 18-month clinical study of bond failures with resin-modified glass ionomer cement in orthodontic practice. Am J Orthod Dentofacial Orthop 120 (2001) 406-415
37. Rix D., Foley T.F., and Mamandras A. Comparison of bond strength of three adhesives: composite resin, hybrid GIC, and glass-filled GIC. Am J Orthod Dentofacial Orthop 119 (2001) 36-42
38. Coups-Smith K.S., Rossouw P.E., and Titley K.C. Glass ionomer cements as luting agents for orthodontic brackets. Angle Orthod 73 (2003) 436-444
39. Bishara S.E., Olsen M.E., Damon P., and Jakobsen J.R. Evaluation of a new light-cured orthodontic bonding adhesive. Am J Orthod Dentofacial Orthop 114 (1998) 80-87
40. Eliades T., and Brantley W.A. The inappropriateness of conventional orthodontic bond strength assessment protocols. European J Orthod 22 (2000) 13-23