Implant fixation in knee replacement: Preliminary in vitro comparison of ceramic and metal cemented femoral components

Knee

Volumn 16, Issue 2, 2009, Pages 101-108

  Cristofolini, Luca ^a,b   Affatato, Saverio ^a   Erani, Paolo ^a   Tigani, Domenico ^a   Viceconti, Marco ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

Bone prosthesis micromotion; Cemented total knee replacement; Ceramic TKR femoral component; Implant loosening; In vitro fixation test

Indexed keywords

CEMENT; METAL;

ARTICLE; CERAMICS; COMPOSITE MATERIAL; FEMUR; IMPLANT; IN VITRO STUDY; MECHANICAL STRESS; PRIORITY JOURNAL; PROSTHESIS LOOSENING; SAMPLE SIZE; STATISTICAL SIGNIFICANCE; TOTAL KNEE REPLACEMENT;

CERAMICS; CHROMIUM ALLOYS; EQUIPMENT FAILURE ANALYSIS; HUMANS; KNEE PROSTHESIS;

EID: 58649112379     PISSN: 09680160     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.knee.2008.08.006     Document Type: Article

References (50)

1. Stea S., Bordini B., De Clerico M., and Toni A. Report of orthopaedic prosthetic implantology. Overall data: hip and knee arthroplasty in Emilia Romagna region. Istituti Ortopedici Rizzoli (2006) 83
2. NIH. NIH consensus statement on total knee replacement. NIH Consens State Sci Statements 2003 Dec 8-10; 20(1) 1-32 (2003), US Department of Health and Human Services, National Institute of Health
3. Hospital DoOLU. Annual report 2006: the Swedish knee arthroplasty register (2006), Wallin & Dallholm AB, Lund
4. Gupta S.K., Chu A., Ranawat A.S., Slamin J., and Ranawat C.S. Osteolysis after total knee arthroplasty. J Arthroplast 22 (2007) 787-799
5. Rasmussen L. Ceramic bearing surfaces (using everything including the kitchen sink). Knee 3 (1996) 173
6. Majima T., Yasuda K., Tago H., Aoki Y., and Minami A. Clinical results of posterior cruciate ligament retaining TKA with alumina ceramic condylar prosthesis: comparison to Co-Cr alloy prosthesis. Knee Surg Sports Traumatol Arthrosc 16 (2008) 152-156
7. Bal B.S., Garino J., Ries M., and Oonishi H. Ceramic bearings in total knee arthroplasty. J Knee Surg 20 (2007) 261-270
8. Yasuda K., Miyagi N., and Kaneda K. Low friction total knee arthroplasty with the alumina ceramic condylar prosthesis. Bull Hosp Joint Dis 53 (1993) 15-21
9. Heimke G., Leyen S., and Willmann G. Knee arthoplasty: recently developed ceramics offer new solutions. Biomaterials 23 (2002) 1539-1551
10. Ezzet K.A., Hermida J.C., Colwell Jr. C.W., and D'Lima D.D. Oxidized zirconium femoral components reduce polyethylene wear in a knee wear simulator. Clin Orthop Relat Res (2004) 120-124
11. Laskin R.S. The use of a ceramic surfaced oxidized zirconium implant in total knee replacement. Techniques in Knee Surgery vol. 6 (2007) 220-226
12. Howell Jr. J.R., Blunt L.A., Doyle C., Hooper R.M., Lee A.J., and Ling R.S. In vivo surface wear mechanisms of femoral components of cemented total hip arthroplasties: the influence of wear mechanism on clinical outcome. J Arthroplast 19 (2004) 88-101
13. Middleton R.G., Howie D.W., Costi K., and Sharpe P. Effects of design changes on cemented tapered femoral stem fixation. Clin Orthop Relat Res (1998) 47-56
14. Collis D.K., and Mohler C.G. Loosening rates and bone lysis with rough finished and polished stems. Clin Orthop Relat Res 355 (1998) 113-122
15. Cloke D.J., Khatri M., Pinder I.M., McCaskie A.W., and Lingard E.A. 284 press-fit Kinemax total knee arthroplasties followed for 10 years: poor survival of uncemented prostheses. Acta Orthop 79 (2008) 28-33
16. Duffy G.P., Murray B.E., and Trousdale R.R. Hybrid total knee arthroplasty analysis of component failures at an average of 15 years. J Arthroplast 22 (2007) 1112-1115
17. Hamadouche M., Boutin P., Daussange J., Bolander M.E., and Sedel L. Alumina-on-alumina total hip arthroplasty: a minimum 18.5-year follow-up study. J Bone Jt Surg Am 84-A (2002) 69-77
18. Hannouche D., Hamadouche M., Nizard R., Bizot P., Meunier A., and Sedel L. Ceramics in total hip replacement. Clin Orthop Relat Res (2005) 62-71
19. Bernasek T.L., Rand J.A., and Bryan R.S. Unicompartmental porous coated anatomic total knee arthroplasty. Clin Orthop Relat Res (1988) 52-59
20. King T.V., and Scott R.D. Femoral component loosening in total knee arthroplasty. Clin Orthop Relat Res (1985) 285-290
21. Sierra R.J., Cooney W.P.t., Pagnano M.W., Trousdale R.T., and Rand J.A. Reoperations after 3200 revision TKAs: rates, etiology, and lessons learned. Clin Orthop Relat Res (2004) 200-206
22. Han H.S., Kang S.B., and Yoon K.S. High incidence of loosening of the femoral component in legacy posterior stabilised-flex total knee replacement. J Bone Jt Surg Br 89 (2007) 1457-1461
23. Windsor R.E., Scuderi G.R., Moran M.C., and Insall J.N. Mechanisms of failure of the femoral and tibial components in total knee arthroplasty. Clin Orthop Relat Res (1989) 15-19 discussion 19-20
24. Lachiewicz P.F., and Soileau E.S. Ten-year survival and clinical results of constrained components in primary total knee arthroplasty. J Arthroplast 21 (2006) 803-808
25. Ryd L. Roentgen stereophotogrammetric analysis of prosthetic fixation in the hip and knee joint. Clin Orthop Relat Res 276 (1992) 56-65
26. Broström L.A., Goldie I., and Selvik G. Micromotion of the total knee. Acta Orthop Scand 60 (1989) 443-445
27. Nilsson K.G., Kärrholm J., and Linder L. Femoral component migration in total knee arthroplasty: randomized study comparing cemented and uncemented fixation of the Miller-Galante I design. J Orthop Res 13 (1995) 347-356
28. Hansson U., Ryd L., and Toksvig-Larsen S. A randomised RSA study of Peri-Apatitetrade mark HA coating of a total knee prosthesis. Knee 15 (2008) 211-216
29. Huiskes R., Verdonschot N., and Nivbrant B. Migration, stem shape, and surface finish in cemented total hip arthroplasty. Clin Orthop Relat Res (1998) 103-112
30. McCormack B.A.O., Prendergast P.J., and Gallagher D.G. An experimental study of damage accumulation in cemented hip prostheses. Clin Biomech 11 (1996) 214-219
31. Cristofolini L., Saponara Teutonico A., Savigni P., Erani P., and Viceconti M. Pre-clinical assessment of the long-term endurance of cemented hip stems. Part 1: effect of daily activities (a comparison of two load histories). Proc Inst Mech Eng [H] 221 (2007) 569-584
32. Britton J.R., and Prendergast P.J. Preclinical testing of femoral hip components: an experimental investigation with four prostheses. J Biomech Eng 127 (2005) 872-880
33. Cristofolini L., Affatato S., Erani P., Leardini W., Tigani D., and Viceconti M. Long-term implant-bone fixation of the femoral component in total knee replacement. Proc Inst Mech Eng J Eng Med 222 (2008) 319-331
34. Barink M. Design improvements in total knee arthroplasty [PhD thesis]. Nijmegen: Radboud University Nijmegen; 2006.
35. Dalen T., and Nilsson K.G. VersaBond bone cement prospective randomized study of the clinical properties of a new bone cement in total knee replacement. Knee 12 (2005) 311-317
36. Lizaur A., Miralles-Muñoz F.A., and Martin-Ballesteros O. Resultados patellares con una pròtesis total de rodilla con componente femoral simétrico: estudio prospectivo con un seguimiento de 3 a 7 años. Revista de Ortopedia y Traumatologìa 50 (2006) 441-446
37. Cristofolini L., Viceconti M., Cappello A., and Toni A. Mechanical validation of whole bone composite femur models. J Biomech 29 (1996) 525-535
38. Cristofolini L., Erani P., Savigni P., Bordini B., and Viceconti M. Pre-clinical assessment of the long-term endurance of cemented hip stems. Part 2: in-vitro and ex-vivo fatigue damage of the cement mantle. Proc Inst Mech Eng 221 (2007) 585-599
39. Barink M., Verdonschot N., and de Waal Malefijt M. A different fixation of the femoral component in total knee arthroplasty may lead to preservation of femoral bone stock. Proc Inst Mech Eng 217 (2003) 325-332
40. Insall J.N., and Easley M.E. Chapter 74: surgical technique and instrumentation in total knee arthroplasty. In: Insall J.N., and Scott W.N. (Eds). Surgery of the Knee. 3rd Edition (2001), Churchill-Livingstone, New York 1553-1620
41. Affatato S, Cristofolini L, Leardini W, Erani P, Zavalloni M, Tigani D, et al. A new method of in-vitro wear assessment of the UHMWPE tibial insert in total knee replacement. Artif Organs in press.
42. Affatato S., Leardini W., Rocchi M., Toni A., and Viceconti M. Investigation on wear of knee prostheses under fixed kinematic conditions. Artif Organs 32 (2008) 13-18
43. CEN. Non destructive testing. Penetrant testing. Part 1 : general principles. EN571-1:1997. Brussels, 1997: p. 16.
44. Speirs A.D., Slomczykowski M.A., Orr T.E., Siebenrock K., and Nolte L.P. Three-dimensional measurement of cemented femoral stem stability: an in vitro cadaver study. Clin Biomech 15 (2000) 248-255
45. Green D.L., Bahniuk E., Liebelt R.A., Fender E., and Mirkov P. Biplane radiographic measurements of reversible displacement (including clinical loosening) and migration of total joint replacements. J Bone Jt Surg Am 65 (1983) 1134-1143
46. Shi J.F., Wang C.J., Laoui T., Hart W., and Hall R. A dynamic model of simulating stress distribution in the distal femur after total knee replacement. Proc Inst Mech Eng 221 (2007) 903-912
47. Jasty M., Maloney W.J., Bragdon C.R., O'Connor D.O., Haire T., and Harris W.H. The initiation of failure in cemented femoral components of hip arthroplasties. J Bone Jt Surg Br 73 (1991) 551-558
48. Goldberg V.M., Figgie M.P., Figgie III H.E., and Sobel M. The results of revision total knee arthroplasty. Clin Orthop Relat Res (1988) 86-92
49. Rand J.A., Chao E.Y., and Stauffer R.N. Kinematic rotating-hinge total knee arthroplasty. J Bone Jt Surg Am 69 (1987) 489-497
50. Banks S.A., Markovich G.D., and Hodge W.A. The mechanics of knee replacements during gait. In vivo fluoroscopic analysis of two designs. Am J Knee Surg 10 (1997) 261-267