From the glassy state to ordered polymer structures: A microhardness study

Polymer

Volumn 50, Issue 3, 2009, Pages 729-746

  Flores, A ^a   Ania, F ^a   Balta Calleja F J ^a  

^a INSTITUTO DE ESTRUCTURA DE LA MATERIA   (Spain)

Author keywords

Microhardness; Polymer; Structure

Indexed keywords

BLOCK COPOLYMERS; CREEP; GLASS; GLASS TRANSITION; MICROHARDNESS; NANOSTRUCTURES; POLYMERS; STRUCTURE (COMPOSITION);

DEFORMATION MECHANISM; DEGREE OF CRYSTALLINITY; DEPTH SENSING INDENTATION; INDENTATION HARDNESS; KINETICS OF CRYSTALLIZATION; LAMELLAR MORPHOLOGY; MICRO-INDENTATION HARDNESS; SEMI-CRYSTALLINE POLYMER;

FILLED POLYMERS;

AGING; CRYSTALLIZATION; DEFORMATION; FILLING MATERIAL; GLASS; GLASS TRANSITION TEMPERATURE; HOMOPOLYMER; MORPHOLOGY; POLYMER; SENSOR; TEMPERATURE EFFECT; THICKNESS;

EID: 58249134009     PISSN: 00323861     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymer.2008.11.037     Document Type: Review

References (179)

1. Ward I.M., and Sweeney J. An introduction to the mechanical properties of solid polymers (2004), John Wiley, Chichester
2. Shonaike G.O., and Advani S.G. Advanced polymer materials (2003), CRC Press, Boca Raton (Florida)
3. Shalaby S.W., and Burg K.J.L. Absorbable and biodegradable polymers (2004), CRC Press, Boca Raton (Florida)
4. In: Meyers M.A., Ritchie R.O., and Rarikaya M. (Eds). Nano and microstructural design of advanced materials (2006), Elsevier, Amsterdam
5. In: Michler G.H., and Baltá-Calleja F.J. (Eds). Mechanical properties of polymers based on nanostructure and morphology (2005), Taylor and Francis, Boca Raton (Florida)
6. Baltá-Calleja F.J., and Fakirov S. The microhardness of polymers (2000), Cambridge University Press, Cambridge
7. Baltá-Calleja F.J., and Fakirov S. Trends Polym Sci 5 8 (1997) 246-249
8. Baltá-Calleja F.J., Flores A., and Ania F. In: Michler G.H., and Baltá-Calleja F.J. (Eds). Mechanical properties of polymers based on nanostructure and morphology (2005), Taylor and Francis, Boca Raton (Florida) [chapter 8]
9. Marsh D.M. Proc R Soc London Ser A 279 (1964) 420-435
10. Hirst W., and Howse M.G.J.W. Proc R Soc London Ser A 311 (1969) 429-444
11. Johnson K.L. Contact mechanics (1985), Cambridge University Press, Cambridge p. 171
12. Studman C.J., Moore M.A., and Jones S.E. J Phys D Appl Phys 10 (1977) 949-956
13. Perrott C.M. Wear 45 (1977) 293-309
14. Hill R. Proc R Soc London Ser A 436 (1992) 617-630
15. Cheng Y.-T., and Cheng C.-M. Mater Sci Eng 44 (2004) 91-149
16. Kermouche G., Loubet J.L., and Bergheau J.M. C R Mech 333 (2005) 389-395
17. Rikards R., Flores A., Ania F., Kushnevski V., and Baltá-Calleja F.J. Comput Mater Sci 11 (1998) 233-244
18. Bucaille J.L., Felder E., and Hochstetter G. J Mater Sci 37 18 (2002) 3999-4011
19. Kermouche G., Loubet J.L., and Bergheau J.M. Mech Mater 40 (2008) 271-283
20. Tabor D. The hardness of metals (2000), Oxford University Press, Oxford Oxford classic series
21. Flores A., Baltá-Calleja F.J., Attenburrow G.E., and Bassett D.C. Polymer 41 (2000) 5431-5435
22. Doerner M.F., and Nix W.D. J Mater Res 1 4 (1986) 601-609
23. Pharr G.M., Oliver W.C., and Brotzen F.R. J Mater Res 7 3 (1992) 613-617
24. Oliver W.C., and Pharr G.M. J Mater Res 7 6 (1992) 1564-1583
25. Oliver W.C., and Pharr G.M. J Mater Res 19 1 (2004) 3-20
26. Baltá-Calleja F.J., Flores A., and Michler G.H. J Appl Polym Sci 93 4 (2004) 1951-1956
27. Puente Orench I., Ania F., Baer E., Hiltner A., Bernal T., and Baltá-Calleja F.J. Philos Mag 84 18 (2004) 1841-1852
28. Baltá-Calleja F.J., Cagiao M.E., Adhikari R., and Michler G.H. Polymer 45 1 (2004) 247-254
29. Henning S., Michler G.H., Ania F., and Baltá-Calleja F.J. Colloid Polym Sci 283 5 (2005) 486-495
30. Flores A., Pieruccini M., Stribeck N., Funari S.S., Bosch E., and Baltá-Calleja F.J. Polymer 46 22 (2005) 9404-9410
31. Ania F., Broza G., Mina M.F., Schulte K., Roslaniec Z., and Baltá-Calleja F.J. Compos Interfaces 13 1 (2006) 33-45
32. Flores A., Mathot V.B.F., Michler G.H., Adhikari R., and Baltá-Calleja F.J. Polymer 47 15 (2006) 5602-5609
33. Uchiyama T., Suyama M., Alam M.M., Asano T., Henning S., Flores A., et al. Polymer 48 2 (2007) 542-555
34. Shahdad S.A., McCabe J.F., Bull S., Rusby S., and Wassell R.W. Dent Mater 23 9 (2007) 1079-1085
35. Bembey A.K., Oyen M.L., Bushby A.J., and Boyde A. Philos Mag 86 33-35 (2006) 5691-5703
36. Godara A., Raabe D., and Green S. Acta Biomater 3 2 (2007) 209-220
37. Liu Y., and Wang M. J Appl Polym Sci 106 4 (2007) 2780-2790
38. Vaziri A., Lee H., and Mofrad M.R.K. J Mater Res 21 8 (2006) 2126-2135
39. Kaufman J.D., Miller G.J., Morgan E.F., and Klapperich C.M. J Mater Res 23 5 (2008) 1472-1481
40. Lu H.B., Huang G., Wang B., Mamedov A., and Gupta S. Thin Solid Films 500 1-2 (2006) 197-202
41. Owens F.J. J Mater Chem 16 5 (2006) 505-508
42. Chiu W.M., Chang Y.A., Kuo H.Y., Lin M.H., and Wen H.C. J Appl Polym Sci 108 5 (2008) 3024-3030
43. Liu T.X., Phang I.Y., Shen L., Chow S.Y., and Zhang W.D. Macromolecules 37 19 (2004) 7214-7222
44. Chavarria F., and Paul D.R. Polymer 47 22 (2006) 7760-7773
45. Shen L., Phang I.Y., Liu T.X., and Zeng K.Y. Polymer 45 24 (2004) 8221-8229
46. Wornyo E., Gall K., Yang F.Z., and King W. Polymer 48 11 (2007) 3213-3225
47. Chen C.H., and Sun Y.Y. J Appl Polym Sci 101 3 (2006) 1826-1832
48. Flores A., Pietkiewicz D., Stribeck N., Roslaniec Z., and Baltá-Calleja F.J. Macromolecules 34 23 (2001) 8094-8100
49. Bartolomeo P., Irigoyen M., Aragón E., Frizzi M.A., and Perrin F.X. Polym Degrad Stab 72 1 (2001) 63-68
50. Maxwell A.S. Polym Eng Sci 48 2 (2008) 381-385
51. Rodríguez R.J., Medrano A., García J.A., Fuentes G.G., Martínez R., and Puértolas J.A. Surf Coat Technol 201 19-20 (2007) 8146-8149
52. Valenza A., Visco A.M., Torrisi L., and Campo N. Polymer 45 5 (2004) 1707-1715
53. Shah N., Singh D., Shah S., Qureshi A., Singh N.L., and Singh K.P. Bull Mater Sci 30 5 (2007) 477-480
54. Mishra A.K., Agrawal P., and Bajpai R. J Appl Polym Sci 92 5 (2004) 3107-3111
55. López-Quintana S., Rosales C., Gobernado-Mitre I., Merino J.C., and Pastor J.M. Polymer 45 23 (2004) 8041-8050
56. Rueda D.R., Varkalis A., Viksne A., Baltá-Calleja F.J., and Zachmann H.G. J Polym Sci Part B Polym Phys 33 (1995) 1653-1661
57. Kusy R.P., Whitley J.Q., and Kalachandra S. Polymer 42 6 (2001) 2585-2595
58. Katare R., Bajpai R., and Datt S.C. Polym Test 13 2 (1994) 107-112
59. Crist B. Plastic deformation of polymers. In: Thomas E.L. (Ed). Materials science and technology vol. 12 (1993), VCH, Weinheim 427-469
60. Gedde U.W. Polymer physics (1995), Chapman and Hall, London p. 78
61. Fakirov S., Baltá-Calleja F.J., and Krumova M. J Polym Sci Part B Polym Phys 37 (1999) 1413-1419
62. Baltá-Calleja F.J., Privalko E.G., Fainleib A.M., Shantalii T.A., and Privalko V.P. J Macromol Sci Phys B39 2 (2000) 131-141
63. Scrivani T., Benavente R., Pérez E., and Pereña J.M. Macromol Chem Phys 202 (2001) 2547-2553
64. Rueda D.R., García Gutiérrez M.C., Baltá-Calleja F.J., and Piccarolo S. Int J Polym Mater 51 (2002) 897-908
65. Baltá-Calleja F.J., García Gutiérrez M.C., Rueda D.R., and Piccarolo S. Polymer 41 11 (2000) 4143-4148
66. Piccarolo S., Saiu M., Brucato V., and Titomanlio G. J Appl Polym Sci 46 4 (1992) 625-634
67. Piccarolo S. J Macromol Sci Phys B31 4 (1992) 501-511
68. Volynskii A.L., Efimov A.V., and Bakeev N.F. Polym Sci Ser C 49 4 (2007) 301-320
69. Flores A., Cagiao M.E., Ezquerra T.A., and Baltá-Calleja F.J. J Appl Polym Sci 79 1 (2001) 90-95
70. Holden G. Understanding thermoplastic elastomers (2000), Carl Hanser Verlag, Munich
71. Hamley I.W. The physics of block copolymers (1998), Oxford Science Publications, Oxford
72. Michler G.H., Baltá-Calleja F.J., Puente I., Cagiao M.E., Knoll K., Henning S., et al. J Appl Polym Sci 90 (2003) 1670-1677
73. Martínez Salazar J., Canalda Cámara J.C., and Baltá-Calleja F.J. J Mater Sci 26 (1991) 2579-2582
74. Baltá-Calleja F.J., Santa Cruz C., Chen D., and Zachmann H.G. Polymer 32 12 (1991) 2252-2257
75. Giri L., Roslaniec Z., Ezquerra T.A., and Baltá-Calleja F.J. J Macromol Sci Phys B36 3 (1997) 335-343
76. Michler G.H., Adhikari R., Lebek W., Goerlitz S., Weidish R., and Knoll K. J Appl Polym Sci 24 (2002) 683-700
77. Dutta N.K., and Tripathy D.K. J Appl Polym Sci 44 (1992) 1635-1648
78. Khaled M.A., Hassan E.A., Elwy A., and Metwally E.E. Mater Lett 19 (1994) 325-328
79. Debnath S.C., Mandal S.K., and Basu D.K. J Appl Polym Sci 57 (1995) 555-562
80. Huang J.C., and Huang H.L. J Polym Eng 17 (1997) 213-229
81. Hamza S.S. Polym Test 17 (1998) 131-137
82. Huang J.C., Chaung S.F., Su T.Y., and Grossman S.J. J Polym Eng 19 (1999) 39-52
83. Koszkul J. J Polym Eng 18 (1998) 249-262
84. Pinto G., López-González C., and Jiménez-Martín A. Polym Compos 20 6 (1999) 804-808
85. Ezquerra T.A., Martínez Salazar J., and Baltá-Calleja F.J. J Mater Sci Lett 5 (1986) 1065-1066
86. Jiang X., Bin Y., and Matsuo M. Polymer 46 (2005) 7418-7424
87. Meincke O., Kaempfer D., Weickmann H., Friedrich C., Vathauer M., and Warth H. Polymer 45 (2004) 739-748
88. Flores A., Ania F., and Baltá-Calleja F.J. Polymer 38 21 (1997) 5447-5453
89. Ania F., Martínez Salazar J., and Baltá-Calleja F.J. J Mater Sci 24 (1989) 2934-2938
90. Kajaks J., Flores A., García Gutiérrez M.C., Rueda D.R., and Baltá-Calleja F.J. Polymer 41 21 (2000) 7769-7772
91. Baltá-Calleja F.J., Flores A., Ania F., and Bassett D.C. J Mater Sci 35 (2000) 1315-1319
92. Puente Orench I. Ph.D. thesis, Universidad Autónoma de Madrid; 2006.
93. Baltá-Calleja F.J., Santa Cruz C., and Asano T. J Polym Sci Part B Polym Phys 31 (1993) 557-565
94. Pastor J.M., González A., and De Saja J.A. J Appl Polym Sci 38 (1989) 2283-2288
95. Connor M.T., García Gutiérrez M.C., Rueda D.R., and Baltá-Calleja F.J. J Mater Sci 32 (1997) 5615-5620
96. Santa Cruz C., Baltá-Calleja F.J., Zachmann H.G., Stribeck N., and Asano T. J Polym Sci Part B Polym Phys 29 (1991) 819-824
97. Cagiao M.E., Connor M., Baltá-Calleja F.J., and Seferis J.C. Polym J 31 9 (1999) 739-746
98. Rueda D.R., Viksne A., Malers L., Baltá-Calleja F.J., and Zachmann H.G. Macromol Chem Phys 195 (1994) 3869-3876
99. Baltá-Calleja F.J. Structure-microhardness correlation of polymers and blends. In: Cunha A.M., and Fakirov S. (Eds). Structure development during polymer processing. NATO science series vol. 370E (2000), Kluwer Academic Publishers, Dordrecht 145-162
100. Flores A., Aurrekoetxea J., Gensler R., Kausch H.H., and Baltá-Calleja F.J. Colloid Polym Sci 276 (1998) 786-793
101. Bayer R.K., Baltá-Calleja F.J., and Kilian H.G. Colloid Polym Sci 275 (1997) 432-439
102. Flores A., Baltá-Calleja F.J., and Bassett D.C. J Polym Sci Part B Polym Phys 37 (1999) 3151-3158
103. Martínez-Salazar J., García Tijero J.M., and Baltá-Calleja F.J. J Mater Sci 23 (1988) 862-866
104. Boneva D., Baltá-Calleja F.J., Fakirov S., Apostolov A.A., and Krumova M. J Appl Polym Sci 69 (1998) 2271-2276
105. Fakirov S., Boneva D., Baltá-Calleja F.J., Krumova M., and Apostolov A.A. J Mater Sci Lett 17 (1998) 453-457
106. Baltá-Calleja F.J., Baranowska J., Rueda D.R., and Bayer R.K. J Mater Sci 28 (1993) 6074-6080
107. Vanderdonckt C., Krumova M., Baltá-Calleja F.J., Zachmann H.G., and Fakirov S. Colloid Polym Sci 276 (1998) 138-143
108. García Gutiérrez M.C., Rueda D.R., Baltá-Calleja F.J., Stribeck N., and Bayer R.K. Polymer 44 2 (2003) 451-455
109. Deslandes Y., Alva Rosa E., Brisse F., and Meneghini T. J Mater Sci 26 (1991) 2769-2777
110. Parlevliet P.P., van der Werf W.A.W., Bersee H.E.N., and Beukers A. Compos Sci Technol 68 3-4 (2008) 896-907
111. Palathai T., Tharajak J., and Sombatsompop N. Mater Sci Eng A 485 1-2 (2008) 66-73
112. Baltá-Calleja F.J., Rueda D.R., Michler G.H., and Naumann I.J. Macromol Sci Phys 37 (1998) 411-419
113. Baer E., Hiltner A., and Morgan R. Phys Today October (1992) 60-67
114. Loo Y.L., Register R.A., Ryan A.J., and Dee G.T. Macromolecules 34 (2001) 8968-8977
115. Jin Y., Rogunova M., Hiltner A., Baer E., Nowacki A.R., Galeski A., et al. J Polym Sci Part B Polym Phys 42 18 (2004) 3380-3396
116. Liu R.R.Y.F., Hiltner A., and Baer E. Macromol Rapid Commun 24 (2003) 943-948
117. Bernal-Lara T.E., Ranade A., Hiltner A., and Baer E. In: Michler G.H., and Baltá-Calleja F.J. (Eds). Mechanical properties of polymers based on nanostructure and morphology (2005), CRC, Taylor & Francis, Boca Raton 629-681
118. Kazmierczak T., Song H., Hiltner A., and Baer E. Macromol Rapid Commun 28 (2007) 2210-2216
119. Baltá-Calleja F.J., Ania F., Puente Orench I., Baer E., Hiltner A., Bernal T., et al. Prog Colloid Polym Sci 130 (2005) 140-148
120. Baltá-Calleja F.J. Colloid Polym Sci 254 (1976) 258-266
121. Baltá-Calleja F.J., and Kilian H.G. Colloid Polym Sci 263 (1985) 697-707
122. Baltá-Calleja F.J., and Santa Cruz C. Acta Polym 47 (1996) 303-309
123. Azzurri F., Flores A., Alfonso G.C., Sics I., Hsiao B.S., and Baltá-Calleja F.J. Polymer 44 5 (2003) 1641-1645
124. Ion R.H., Pollock H.M., and Roques-Carmes C. J Mater Sci 25 (1990) 1444-1454
125. Van Landingham M.R., Chang N.K., Drzal P.L., White C.C., and Chang S.H. J Polym Sci Part B Polym Phys 43 (2005) 1794-1811
126. Tweedie C.A., and Van Vliet K.J. J Mater Res 21 6 (2006) 1576-1589
127. Beake B. J Phys D Appl Phys 39 (2006) 4478-4485
128. Beake B.D., Bell G.A., Brostow W., and Chonkaew W. Polym Int 56 (2007) 773-778
129. Bell G.A., Bielinski D.M., and Beake B.D. J Appl Polym Sci 107 (2008) 577-582
130. Yang S., Zhang Y.W., and Zeng K. J Appl Phys 95 7 (2004) 3655-3666
131. Minkova L., and Peneva Y. Polymer 44 21 (2003) 6483-6488
132. Flores A., Baltá-Calleja F.J., and Asano T. J Appl Phys 90 12 (2001) 6006-6010
133. Mina M.F., Ania F., Huy T.A., Michler G.H., and Baltá-Calleja F.J. J Macromol Sci Phys 43 5 (2005) 947-961
134. Flores A., Bayer R.K., Krawietz K., and Baltá-Calleja F.J. J Macromol Sci Phys 39 (2000) 749-759
135. Berdjane K., Berdjane Z., Rueda D.R., Bénachour D., and Baltá-Calleja F.J. J Appl Polym Sci 89 (2003) 2046-2050
136. Perrin F.X., Nguyen V., and Vernet J.L. Polymer 43 23 (2002) 6159-6167
137. Baltá-Calleja F.J. Adv Polym Sci 66 (1985) 117-148
138. Baltá-Calleja F.J., Rueda D.R., Porter R.S., and Mead W.T. J Mater Sci 15 (1980) 765-772
139. Mulhearn T.O., and Tabor D. J Inst Met 89 (1960) 7-12
140. Gourrier A., García Gutiérrez M.C., and Riekel C. Macromolecules 35 (2002) 8072-8077
141. Gourrier A., García-Gutiérrez M.C., and Riekel C. Macromolecules 38 (2005) 3838-3844
142. Gourrier A., García-Gutiérrez M.C., and Riekel C. Philos Mag A 86 33-35 (2006) 5753-5767
143. Palza H., López-Majada J.M., Quijada R., Benavente R., Pérez E., and Cerrada M.L. Macromol Chem Phys 206 (2005) 1221-1230
144. Arranz-Andrés J., Suárez I., Peña B., Benavente R., Pérez E., and Cerrada M.L. Macromol Chem Phys 208 (2007) 1510-1521
145. Vanden Eynde S., Mathot V.B.F., Koch M.H.J., and Reynaers H. Polymer 41 13 (2000) 4889-4900
146. Fakirov S. J Mater Sci 42 4 (2007) 1131-1148
147. Rueda D.R., Bayer R.K., Baltá-Calleja F.J., and Zachmann H.G. J Macromol Sci Phys B28 2 (1989) 265-282
148. Göschel U. Polymer 36 6 (1995) 1157-1165
149. Göschel U., Deutscher K., and Abetz V. Polymer 37 1 (1996) 1-6
150. Mina M.F., Ania F., Baltá-Calleja F.J., and Asano T. J Appl Polym Sci 91 (2004) 205-210
151. Santa Cruz C., Baltá-Calleja F.J., Asano T., and Ward I.M. Philos Mag A 68 1 (1993) 209-224
152. Asano T., and Seto T. Polym J 5 1 (1973) 72-85
153. Bonart R. Kolloid Z Z Polym 213 1-2 (1966) 1-11
154. Yeh G.S.Y., and Geil P.H.J. J Macromol Sci Phys B1 (1967) 235-249
155. Asano T., Baltá-Calleja F.J., Flores A., Tanigaki M., Mina M.F., Sawatari C., et al. Polymer 40 23 (1999) 6475-6484
156. Nicholson T.M., Davies G.R., and Ward I.M. Polymer 35 20 (1994) 4259-4262
157. Welsh G.E., Blundell D.J., and Windle A.H. Macromolecules 31 (1998) 7562-7565
158. Kawakami D., Ran S., Burger C., Fu B., Sics I., Chu B., et al. Macromolecules 36 (2003) 9275-9280
159. Kawakami D., Hsiao B.S., Ran S., Burger C., Fu B., Sics I., et al. Polymer 45 3 (2004) 905-918
160. Asano T., Forhad Mina M.D., and Fujiwara Y. A survey of polymer crystallization by X-ray diffraction (2006), SKP Inc, Shizuoka
161. Pethica J.B., Hutchings R., and Oliver W.C. Philos Mag A 48 4 (1983) 593-606
162. Puente Orench I., Putthanarat S., Baltá-Calleja F.J., Eby R.K., and Stone M. Polymer 45 6 (2004) 2041-2044
163. Flores A., and Baltá-Calleja F.J. Philos Mag A 78 6 (1998) 1283-1297
164. Briscoe B.J., Sebastian K.S., and Sinha S.K. Philos Mag A 74 5 (1996) 1159-1169
165. Zhang C.Y., Zhang Y.W., Zeng K.Y., and Shen L. Philos Mag 86 28 (2006) 4487-4506
166. Liu C.K., Lee S., Sung L.P., and Nguyen T. J Appl Phys 100 (2006) 033503-1-033503-9
167. Oyen M.L. Philos Mag 86 33-35 (2006) 5625-5641
168. Juliano T.F., Van Landingham M.R., Tweedie C.A., and Vav Vliet K.J. Exp Mech 47 1 (2007) 99-105
169. Gray A., and Beake B.D. J Nanosci Nanotechnol 7 7 (2007) 2530-2533
170. Shing S.P., Smith J.F., and Singh R.P. Exp Mech 48 (2008) 571-583
171. Syed Asif S.A., Wahl K.J., and Colton R.J. Rev Sci Instrum 70 (1999) 2408-2413
172. Hayes S.A., Goruppa A.A., and Jones F.R. J Mater Res 19 11 (2004) 3298-3306
173. Loubet J.L., Oliver W.C., and Lucas B.N. J Mater Res 15 5 (2000) 1195-1198
174. Li X., and Bhushan B. Mater Charact 48 (2002) 11-36
175. Odegard G.M., Gates T.S., and Herring H.M. Exp Mech 45 2 (2005) 130-136
176. Bouaita N., Bull S.J., Fernández Palacio J., and White J.R. Polym Eng Sci 46 (2006) 1160-1172
177. White C.C., Vanlandingham M.R., Drzal P.L., Chang N.K., and Chang S.H. J Polym Sci Part B Polym Phys 43 (2005) 1812-1824
178. Tranchida D., Piccarolo S., and Soliman M. Macromolecules 39 13 (2006) 4547-4556
179. Lorenzo V., and Pereña J.M. J Appl Polym Sci 39 (1990) 1467-1474