Using high-purity MgO nanopowder as a stabilizer in two different particle size monoclinic ZrO2: Its influence on the fracture toughness

Materials Chemistry and Physics

Volumn 114, Issue 1, 2009, Pages 407-414

  Brito Chaparro, J A ^a   Aguilar Elguezabal, A ^a   Echeberria, J ^b   Bocanegra Bernal, M H ^a  

^a CENTRO DE INVESTIGACIÓN EN MATERIALES AVANZADOS   (Mexico)

^b TECNUN UNIVERSITY OF NAVARRA   (Spain)

Author keywords

Agglomerates; Mechanical properties; MgO; Uniaxial compaction; ZrO2 ceramics

Indexed keywords

AGGLOMERATION; CERAMIC MATERIALS; COMPACTION; FRACTURE; GRAIN GROWTH; GRAIN SIZE AND SHAPE; HARDNESS; MECHANICAL PROPERTIES; NANOSTRUCTURED MATERIALS; PARTICLE SIZE; POWDERS; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY; X RAY ANALYSIS; ZIRCONIUM ALLOYS;

AGGLOMERATES; BIMODAL PARTICLE SIZE DISTRIBUTIONS; COMPACTION PROCESSES; GRAIN SIZES; INTERGRANULAR; MAJOR RETENTIONS; MGO; MGO POWDERS; NANO POWDERS; PHASE TRANSFORMATIONS; SUB MICRONS; T-PHASE; UNIAXIAL COMPACTION; X-RAY DIFFRACTIONS; ZRO2 CERAMICS;

FRACTURE TOUGHNESS;

EID: 58149462059     PISSN: 02540584     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matchemphys.2008.09.058     Document Type: Article

References (64)

1. Czeppe T., Zieba P., Baliga W., Dobrev E., and Pawlowski A. Mater. Chem. Phys. 81 (2003) 312-314
2. Hao L., and Lawrence J. Mater. Sci. Eng. A364 (2004) 171-181
3. Hirvonen A., Nowaka R., Yamamoto Y., Sekino T., and Niihara K. J. Eur. Ceram. Soc. 26 (2006) 1497-1505
4. Andrews M.J., Ferber M.K., and Lara-Curzio E. J. Eur. Ceram. Soc. 22 (2002) 2633-2639
5. Chaim R. J. Am. Ceram. Soc. 75 3 (1992) 694-699
6. Din S., and Kaleem A. Mater. Chem. Phys. 53 (1998) 48-54
7. Mustafa E., Wilhelm M., and Wruss W. Ceram. Int. 29 (2003) 189-194
8. Basu B., Vleugels J., and Van Der Biest O. Mater. Sci. Eng. A366 (2004) 338-347
9. Standard O.C., and Sorrel C.C. Key Eng. Mater. 153-154 (1998) 251-300
10. Abe F., Muneki S., and Yagi K. J. Mater. Sci. 32 (1997) 513-522
11. Aneziris C.G., Pfaff E.M., and Maier H.R. J. Eur. Ceram. Soc. 20 (2000) 1729-1737
12. Czeppe T., Zieba P., and Pawlowski A. J. Eur. Ceram. Soc. 22 (2002) 1389-1394
13. Sakumka T. Key Eng. Mater. 153-154 (1998) 75-96
14. Hughan R.R., and Hannink R.H.J. J. Am. Ceram. Soc. 69 7 (1986) 556-563
15. Basu B., Vleugels y J., and Van Der Biest O. J. Eur. Ceram. Soc. 24 (2004) 2031-2040
16. Borik M.A., Lomonova E.E., Osiko V.V., Panov V.A., Porodinkov O.E., Vishnyakova M.A., Voron'ko Yu.K., and Voronov V.V. J. Cryst. Growth 275 (2005) e2173-e2179
17. Deville S., Attaoui H.E., and Chevalier J. J. Eur. Ceram. Soc. 25 (2005) 3089-3096
18. Zhang Y.L., Jin W.J., Rong Y.H., Hsu T.Y., Jiang D.Y., and Shi J.L. Acta Mater. 54 (2006) 1289-1295
19. Moon J., Choi H., Kim H., and Lee C. Surf. Coat. Technol. 155 (2002) 1-10
20. Wu S., and Brook R.J. Trans. J. Br. Ceram. Soc. 82 (1983) 260-264
21. Montross Ch.S. J. Am. Ceram. Soc. 75 2 (1992) 463-468
22. Casellas D., Cumbrera F.L., Sanchez-Bajo F., Forsling W., Lanes L., and Anglada M. J. Eur. Ceram. Soc. 21 (2001) 765-777
23. Hannink R.H.J., Gross V., and Muddle B.C. Ceram. Int. 24 (1998) 45-51
24. Hellmig R.J., and Ferkel H. J. Am. Ceram. Soc. 84 2 (2001) 261-266
25. Liu D.M., and Fu Ch.T. Ceram. Int. 22 (1996) 67-72
26. Auret J.G., Sigalas I., and Kingon A.I. Am. Ceram. Soc. Bull. 65 9 (1986) 1301-1305
27. Messing G.L., Markhoff C.J., and McCoy L.G. Ceram. Bull. 61 8 (1982) 857-860
28. R.D. Carneim, PhD Thesis, The Pensylvania State University, 2000.
29. W.J. Walker Jr., KONA No. 21, 2003, pp. 133-142.
30. Michrafy A., Ringenbacher D., and Tchoreloff P. Powder Technol. 127 (2002) 257-266
31. Carneim R.D., and Messing G.L. Powder Technol. 115 (2001) 131-138
32. Razavi Hesabi Z., Hafizpour H.R., and Simchi A. Mater. Sci. Eng. A454-455 (2007) 89-98
33. M.J. Readey, F.M. Mahoney, Sandia National Laboratories, Albuquerque, NM 87185-0333, DE96002087, SAND-95-2374C, December 1995.
34. K.G. Ewsuk, J. Cesarano III, R.J. Cochran, B.F. Blackwell, D.R. Adkins, Sandia National Laboratories, Alburqueque, NM 87185-1349, SAND 95-1749C, September 1995.
35. Köbel S., Plüschke J., Vogt U., and Graule T.J. Ceram. Int. 30 (2004) 2105-2110
36. Heckel R.W. Trans. Metall. Soc. AIME 221 (1961) 1001-1008
37. James P.J. Powder Metall. Int. 4 (1972) 82-85
38. James P.J. Powder Metall. Int. 4 (1972) 193-198
39. Train D.J. Transmission. Trans. Inst. Chem. Eng. 35 (1957) 258-266
40. J.A. Hersey, J.S. Rees, Particle Size Analyses 1970, Society for Analytical Chemistry, London, 1972, p. 33.
41. Martin C.L., and Bouvard D. Int. J. Powder Metall. 46 (2004) 907-927
42. Bruch C.A. Ceram. Age 83 10 (1967) 44-53
43. Meza J.M., and Chavez C. DYNA 139 (2003) 53-59
44. Fogagnolo J.B., Ruiz-Navas E.M., Robert M.H., and Torralba J.M. Mater. Sci. Eng. A355 (2003) 50-55
45. Carnal A., Campos M., and Torralba J.M. Proceedings of the 4th International Conference on Powder Metallurgy for Automotive Parts, PM Auto 5. Isfahan, Iran (2005) 161-170
46. Cambronero L.E.G., Sanchez E., Ruiz-Roman J.M., and Ruiz Prieto J.M. J. Mater. Proc. Technol. 143-144 (2003) 378-383
47. M.H. Bocanegra-Bernal, Master Thesis, Escuela Técnica Superior de Ingenieros Industriales, Universidad de Navarra, San Sebastián, Spain, 1988.
48. S.J. Glasss, K.G. Ewsuk, F.M. Mahoney, Ceramic powder compaction, in: The Proceedings of the American Ceramic Society International Symposium on Manufacturing Practices and Technology, US, 1995.
49. S.J. Glass, K.G. Ewsuk, M.J. Readey, Sandia National Laboratories, Albuquerque, NM 87185-0333, SAND95-1889C, August 1995.
50. Niesz D.E., Bennett R.B., and Snyder M.J. Am. Ceram. Soc. Bull. 51 (1972) 677-680
51. S. Mattsson, PhD Thesis, Acta Universitatis Upsaliensis, Faculty of Pharmacy, Sweden, 2000.
52. Lukasiewicz J., and Reed J.S. Character. J. Am. Ceram. Soc. Bull. 57 9 (1978) 798-801
53. Dimilia R.A., and Reed J.S. Am. Ceram. Soc. Bull. 62 (1983) 484-488
54. Saito Y., Tanaka S., Uchida N., and Uematsu K. J. Am. Ceram. Soc. 84 10 (2001) 2454-2456
55. Zou R.-P., Feng Ch.-L., and Yu A.-B. J. Am. Ceram. Soc. 84 3 (2001) 504-508
56. Quinelatelo A.L., Longo E., Perazolli L.A., and Varela J.A. J. Eur. Ceram. Soc. 20 (2000) 1077-1084
57. Robert Ch.L., Ansat F., Deloget C., Gaudon M., and Rousset A. Ceram. Int. 29 (2003) 151-158
58. M.S. Peizhen Lu, PhD Thesis, The Ohio State University, 2000.
59. Olevsky E., and Molinari A. Int. J. Plast. 16 (2000) 1-37
60. Kingery W.D., and Francois B. In: Kuczyuski G.C., Hooton N.A., and Gibbon C.F. (Eds). Sintering and Related Phenomena (1967), Gordon and Breach, NY 471
61. Lim L.C., Wong P.M., and Jan M.A. Acta Mater. 48 (2000) 2263-2275
62. Hannink R.H.J., Kelly P.M., and Muddle B.C. J. Am. Ceram. Soc. 83 3 (2000) 461-487
63. Tekeli S. J. Alloys Compd. 391 (2005) 217-224
64. Cutler R.A., Reynolds J.R., and Jones A. J. Am. Ceram. Soc. 75 8 (1992) 2173-2183