Instability of sintering of porous bodies

International journal of plasticity

Volumn 16, Issue 1, 2000, Pages 1-37

  Olevsky, Eugene ^a   Molinari, Alain ^b  

^a UTC Aerospace Systems   (United States)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

DENSIFICATION; HOT ISOSTATIC PRESSING; MATHEMATICAL MODELS; OPTIMIZATION; PERTURBATION TECHNIQUES; PLASTIC FLOW; POROSITY; PRESSURE EFFECTS; SENSITIVITY ANALYSIS; SINTERING; THERMAL EFFECTS; THERMODYNAMIC STABILITY;

LINEAR VISCOUS MATERIALS;

VISCOPLASTICITY;

EID: 0034463191     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(99)00032-7     Document Type: Article

References (82)

1. Ashby M.F. Background Reading, HIP 6.0. 1990;University of Cambridge, Cambridge, UK.
2. Beere W. The second stage sintering kinetics of powder compacts. Acta Metall. 23(1):1975;139-145.
3. Bhat T.B., Arunachalam V.S. Inhomogeneous flow and the effective pressure concept in pressure sintering. J Mater. Sci. 15:1980;1614-1618.
4. Bordia R.K., Jagota A. Crack growth and damage in constrained sintering films. J Amer. Ceram. Soc. 76(10):1993;2475.
5. Bordia R.K., Scherer G.W. Overview no. 70. On constrained sintering I, II, III. Acta Metall. 36(9):1988;2393,2399,2422.
6. Bouvard D., McMeeking R.M. The deformation of interparticle necks by diffusion controlled creep. J Amer. Ceram. Soc. 79:1996;666-672.
7. Brett Seigle Shrinkage of voids in copper. Acta Met. 11:1963;467-474.
8. 2 two-phase systems. J Amer. Ceram. Soc. 79:1996;1163-1168.
9. Coble R.L. Sintering crystalline solids. 1. Intermediate and final state diffusion models. J Appl. Phys. 32:1961;787.
10. Cocks A.C.F. Overview no. 117. The structure of constitutive laws for the sintering of fine grained materials. Acta Metall. 42(7):1994;2191.
11. Cocks A.C.F., Aparicio N.D. Diffusional creep and sintering - the application of bounding theorems. Acta Metall. 43(2):1995;731.
12. Cocks A.C.F., Du Z.Z. Pressureless sintering and HIPing of inhomogeneous ceramic compacts. Acta Metall. 41(7):1993;2113.
13. Corapcioglu Y., Uz T. Constitutive equations for plastic deformation of porous materials. J Powd. Tech. 21:1978;269.
14. DeJonghe L.C., Rahaman M.L. Pore shrinkage and sintering stress. J Amer. Ceram. Soc. 67:1984;C214-C215.
15. DeJonghe L.C., Raharnan M.N. Sintering stress of homogeneous and heterogeneous powder compacts. Acta Metall. 36(1):1988;223.
16. Doraivelu S.M., Gegel H.L., Gunasekera J.S., Malas J.C., Morgan J.T. A new yield function for compressible P/M materials. J Mech. Sci. 26(9/10):1984;527-535.
17. Druyanov B.A., Vartanov K.B. A thermomechanical theory of deformation of porous and powder media incorporating "spontaneous" densification. Sov. Powd. Metall. 263(11):1984;29.
18. Du Z.-Z., Cocks A.C.F. Constitutive models for the sintering of ceramic components - I. Material Models. Acta Metall. 40(8):1992;1969.
19. Du Z.-Z., Cocks A.C.F. Constitutive models for the sintering of ceramic components - II. Sintering of inhomogeneous bodies. Acta Metall. 40(8):1992;1981.
20. Fleck N.A., Kuhn L.T., McMeeking R.M. Yielding of metal powder bonded by isolated contacts. J Mech. Phys. Solids. 40(5):1992;1139.
21. German R.M. (1996), Sintering Theory and Practice, John Wiley and Sons, Inc.
22. Goldsmith A., Waterman T.E., Hirschhom H.J. Handbook of Thermophysical Properties of Solid Materials. 1961;Vol. III: Ceramics, Macmillian Co, New York.
23. Green R.G. A plasticity theory for porous solids. Int. J Mech. Sci. N4:1972;109-120.
24. Gregg R.A., Rhines F.N. Surface tension and the sintering force in copper. Metall. Trans. 4(5):1973;1365-1374.
25. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth, part 1. Yield criteria and flow rules for porous ductile media. J Eng. Mater. Techn. 99:1977;2.
26. Helle A.S., Easterling K.E., Ashby M.F. Hot-isostatic pressing diagrams. new developments Acta Metall. 12:1985;2163-2174.
27. Hong W., Dharani L.R. Pressureless sintering of a ceramic-matrix with multiple rigid inclusions - finite-element model. J Amer. Ceram. Soc. 78:1995;1593-1600.
28. Hsueh C.H., Evans A.G., Cannon R.M., Brook R.J. Visco-elastic stresses and sintering damage in heterogeneous powder compacts. Acta Metall. 34:1986;927.
29. Jagota A., Hui C.Y. Mechanics of sintering thin films - I. Formulation and analytical results. Mech. Mater. 1:1990;221.
30. Jagota A., Hui C.Y. Mechanics of sintering thin films - II. Cracking due to self-stress. Mech. Mater. 9:1990;107.
31. Kim K.T., Carroll M.M. Compaction equations for strain hardening porous materials. Int. J Plasticity. 3:1987;63-73.
32. Kingery W.D. Introduction to Ceramics. 1967;Wiley, New York.
33. Kuhn H.A., Downey C.L. Deformation characteristics and plasticity theory of sintered powder materials. Int. J Powd. Metall. 7(1):1971;15.
34. Lee B.J., Mear M.E. Constitutive relations for power-law solids containing aligned spheroidal voids. J Mech. Phys. Solids. 40:1992;1805.
35. Lenel F.V., Hausner H.H., Hayashi E., Ansell G.S. The driving force for shrinkage in copper powder compacts during the early stages of sintering. Powder Metall. 8:1961;186-198.
36. Mackenzie J.K. The elastic constants of a solid containing spherical holes. Proc. Phys. Soc. 63-B:1950;2-11.
37. McMeeking R.M. Constitutive laws for sintering and pressing of powders. Mechanics of Granular Materials and Powder Systems. ASME. 37:1992;51.
38. McMeeking R.M., Kuhn L.T. Diffusional creep law for powder compacts. Acta Mater. 40(5):1992;961.
39. Molinari, A., 1988, Shear band analysis. In: Nonlinear Phenomena in Material Sciences. Solid State Phenomena, Vols. 3-4, Trans. Tech. Publ. pp. 447-468.
40. Molinari A., Estrin Y., Dudzinski D. Thermomechanical instability associated with heat release during plastic flow. Int. J Plasticity. 9(3):1993;317-343.
41. Morgan C.S. Material transport by dislocation motion in sintering. Phys. Sinter. 5:1973;31-40.
42. Mori, K., 1992. Finite element simulation of nonuniform shrinkage in sintering of ceramic powder compact. NUMIFORM92, Sophia-Antipolis, Rotterdam, pp. 69-78.
43. Olevsky, E., 1994. On continuum simulation of consolidation in porous media. Proc. of Powder Metallurgy World Congress, Paris, Vol. 2, p. 697.
44. Olevsky E., Bert C. A comparative analysis of viscous sintering problems by the differential quadrature and the finite element methods. Comm. Num. Meth. Eng. 13:1997;355-372.
45. Olevsky E., Skorohod V., 1988. Some questions of sintering kinetics under external forces influence. Technological and Design Plasticity of Porous Materials, IPMS NAS Ukraine, p. 97.
46. Olevsky E., Skorohod V. Deformation aspects of anisotropic-porous bodies sintering. Journal de Physique IV. C7(3):1993;739.
47. Olevsky E, Dudek H.J., Kaysser W.A. HIPing conditions for processing of metal matrix composites using continuum theory for sintering I. Theoretical analysis. Acta Mater. 44(N2):1996;707-713.
48. Olevsky E., Timmermans G., Shtern M., Froyen L., Delaey L. The permeable element method for modeling of deformation processes in porous and powder materials: Theoretical basis and checking by experiments. Powd. Technol. 93/2:1997;123-141.
49. Panda, P.C., Mobley, W.M., Raj, R., 1989. Effect of the heating rate on the relative rates of sintering and crystallization in glass. J. Amer. Ceram. Soc. 72 (12), 2361-2364.
50. Ponte Castaneda P. The effective mechanical properties of nonlinear isotropic composites. J. Mech. Phys. Solids. 39:1991;45.
51. Rahaman M.N., DeJonghe L.C. Sintering of glass powder under a uniaxial stress. J. Amer. Ceram. Soc. 73(3):1990;707.
52. Rahaman M.N., Brook R.J., DeJonghe L.C. Effect of shear-stress on sintering. J. Amer. Ceram. Soc. 69:1986;53-58.
53. Raiser G., Clifton R.J. High strain rate deformation and damage in ceramic materials. J. Eng. Mater. Technol. - Trans. ASME. 115:1993;292-299.
54. Raj R. Analysis of the sintering pressure. J. Amer. Ceram. Soc. 70:1987;C210-C211.
55. Reid C.R. Nui-nerical simulation of free shrinkage using a continuum theory for sintering. Powder Technology. 81:1994;287-291.
56. Reid C.R., Oakberg R.G. A continuum theory for the mechanical response of materials to the thermodynamic stress of sintering. Mech. Mater. 10:1990;203-213.
57. Riedel, H., 1990. A constitutive model for the finite-element simulation of sintering - distortions and stresses. In: Messing, G.L. (Ed.), Ceramic Powder Science III. Amer Ceram Soc, Westerville, OH, pp. 619.
58. Riedel H., Svoboda J. A theoretical study of grain growth in porous solids during sintering. Acta Metall. 41(6):1993;1929.
59. Riedel H., Kozak V., Svoboda J. Densification and creep in the final stage of sintering. Acta Metall. 42(9):1994;3093.
60. Scherer G.W. Sintering of low-density glasses: I,II,III. J. Amer. Ceram. Soc. 60(5):1977;236, 239, 243.
61. Scherer G.W. Sintering of inhomogeneous glasses: Application to optical waveguides. J. Non-Cryst. Solids. 34:1979;239.
62. Schatt W., Friedrich E., Wieters K.P. Dislocation-activated sintering. Rev. Powd. Met. Phys. Ceram. 3:1986;1-111.
63. Shima S., Oyane M. Plasticity theory for porous metals. Int. J Mech. Sci. N6:1976;285-291.
64. Shtern M.B., Serdyuk G.G., Maximenko L.A., Truhan Y.V., Shulyakov Y.M. Phenomenological Theories of Pressing of Powders. 1982;Naukova Durnka, Kiev.
65. Skorohod V.V. Rheological Basis of the Theory of Sintering. 1972;Kiev, Naukova Durnka.
66. Skorohod, V.V., Olevsky, E.A., Shtern, M.B., 1989. Questions of the mathematical modeling of sintering under the external force influence. Proc. of IX Int. Conf on Powder Metallurgy, Dresden, Vol. pp. 43-57.
67. Skorohod V., Olevsky E., Shtern M. Continuum theory of sintering of porous bodies. model and application Science of Sintering. 23(2):1991;79-91.
68. Skorohod V., Olevsky E., Shtern M. Continuum theory of sintering - I. Phenomenological model. Analysis of the external forces influence on the sintering kinetics. Sov. Powd. Metall. 361(1):1993;22.
69. Skorohod V., Olevsky E., Shtern M. Continuum theory of sintering - II. Effect of the rheological properties of the solid phase on the sintering kinetics. Sov. Powd Metall. 362(2):1993;16.
70. Skorohod V., Olevsky E., Shtern M. Continuum theory of sintering - III. Effect of the nonhomogeneous distribution of the compact parameters and their fixation conditions on the sintering kinetics. Sov. Powd. Metall. 363(3):1993;208.
71. Skorohod V.V., Solonin S.M. Physical-Metallurgical Basis of Sintering of Powders. 1984;Moscow, Metallurgiya.
72. Sofronis P., McMeeking R.M. Creep of power-law material containing spherical voids. Trans. of ASME. 59:1992;88-95.
73. Svoboda J., Riedel H. Pore-boundary interactions and evolution equations for the porosity and the grain size during sintering. Acta Metall. 40(11):1992;2829.
74. Svoboda J., Riedel H. New solutions describing the formation of interparticle necks in solid-state sintering. Acta Metall. 43(1):1995;1.
75. Svoboda J., Riedel H. Quasi-equilibrium sintering for coupled grain-boundary and surface diffusion. Acta Metall. 43(2):1995;499.
76. Svoboda L., Riedel H., Zipse H. Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering, I, II. Acta Mater. 42:1994;435, 445.
77. Svoboda J., Riedel H., Gaebel R. A model for liquid phase sintering. Acta Mater. 44(8):1996;3215.
78. Swinkels F.B., Ashby M.F. A second report on sintering diagrams. Acta Metall. 29:1985;259-281.
79. Tvergaard V. On localization in ductile materials containing spherical voids. Int. J Fracture. 18:1982;237-252.
80. Venkatachari K.R., Raj R. Shear deformation and densification of powder compacts. J. Amer. Ceram. Soc. 69(6):1986;499.
81. Wilkinson D.S., Ashby M.F. Pressure sintering by power law creep. Acta Metall. 23:1975;1277-1285.
82. Zhao Y., Dharani L.R. Theoretical model for the analysis of a ceramic thin-film sintering on a non-sintering substrate. Thin Solid Films. 245:1994;109-114.