Are encapsulated anterior glass-ionomer restoratives better than their hand-mixed equivalents?

Journal of Dentistry

Volumn 37, Issue 2, 2009, Pages 133-140

  Dowling, Adam H ^a   Fleming, Garry J P ^a  

^a TRINITY COLLEGE DUBLIN   (Ireland)

Author keywords

Compressive fracture strength; Elastic modulus; Encapsulation; Glass ionomer restoratives; Hand mixing; Wear resistance

Indexed keywords

CHEMFIL SUPERIOR; FUJI GLASS IONOMER LINING CEMENT; FUJI GLASS-IONOMER LINING CEMENT; GLASS IONOMER; KETAC FIL; KETAC-FIL; MALEIC ACID DERIVATIVE;

ARTICLE; CHEMISTRY; COMPARATIVE STUDY; COMPRESSIVE STRENGTH; DENTAL SURGERY; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; MICROCAPSULE; POWDER; SOLUTION AND SOLUBILITY; SURFACE PROPERTY; THREE DIMENSIONAL IMAGING; TIME; YOUNG MODULUS;

CAPSULES; CHEMISTRY, PHARMACEUTICAL; COMPRESSIVE STRENGTH; DENTAL RESTORATION WEAR; DENTAL RESTORATION, PERMANENT; ELASTIC MODULUS; GLASS IONOMER CEMENTS; HUMANS; IMAGING, THREE-DIMENSIONAL; MALEATES; MATERIALS TESTING; POWDERS; SOLUTIONS; STRESS, MECHANICAL; SURFACE PROPERTIES; TIME FACTORS;

EID: 58149166610     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2008.10.006     Document Type: Article

References (50)

1. Wilson A.D., and Kent B.E. A new translucent material for dentistry. The glass ionomer cement. British Dental Journal 132 (1972) 133-135
2. Wilson A.D., and Nicholson J.W. Polyalkenoate cements. Acid-base cements: their biomedical and industrial applications (1993), Cambridge University Press, Cambridge p. 90-196
3. Mount G.J. Glass ionomers: a review of their current status. Operative Dentistry 24 (1999) 115-124
4. Fleming G.J.P., Kenny S.M., and Barralet J.E. The optimisation of the initial viscosity of an encapsulated glass-ionomer restorative following different mechanical mixing regimes. Journal of Dentistry 34 (2006) 155-163
5. Culbertson B.M. Glass-ionomer dental restoratives. Progress in Polymer Science 26 (2001) 577-604
6. Coury T.L., Willer R.D., Miranda F.J., and Probst R.T. Adhesiveness of glass-ionomer cement to enamel and dentin: a laboratory study. Operative Dentistry 7 (1982) 2-6
7. Maldonado A., Swartz M.L., and Phillips R.W. An in vitro study of certain properties of a glass ionomer cement. Journal of the American Dental Association 96 (1978) 785-791
8. Forsten L. Fluoride release and uptake by glass-ionomers and related materials and its clinical effect. Biomaterials 19 (1998) 503-508
9. Crisp S., Lewis B.G., and Wilson A.D. Characterization of glass-ionomer cements 1. Long term hardness and compressive strength. Journal of Dentistry 4 (1976) 162-166
10. White S.N., and Yu Z. Compressive and diametral tensile strengths of current adhesive luting agents. Journal of Prosthetic Dentistry 69 (1993) 568-572
11. Ban S., Hasegawa J., and Anusavice K.J. Effect of loading conditions on bi-axial flexure strength of dental cements. Dental Materials 8 (1992) 100-104
12. Frankel N., Pearson G.J., and Labella R. Long-term strength of aesthetic restoratives. Journal of Oral Rehabilitation 25 (1998) 89-93
13. Prosser H.J., Powis D.R., and Wilson A.D. Glass-ionomer cements of improved flexural strength. Journal of Dental Research 65 (1986) 146-148
14. Xie D., Brantley W.A., Culbertson B.M., and Wang G. Mechanical properties and microstructures of glass-ionomer cements. Dental Materials 16 (2000) 129-138
15. Wilson A.D., Crisp S., and Ferner A.J. Reactions in glass-ionomer cements: IV. Effect of chelating comonomers on setting behavior. Journal of Dental Research 55 (1976) 489-495
16. Mount G.J., Makinson O.F., and Peters M.C.R.B. The strength of auto-cured and light-cured materials. The shear punch test. Australian Dental Journal 41 (1996) 118-123
17. Nomoto R., Carrick T.E., and McCabe J.F. Suitability of a shear punch test for dental restorative materials. Dental Materials 17 (2001) 415-421
18. Higgs W.A.J., Lucksanasombool P., Higgs R.J.E.D., and Swain M.V. Comparison of the material properties of PMMA and glass-ionomer based cements for use in orthopaedic surgery. Journal of Materials Science: Materials in Medicine 12 (2001) 153-160
19. Prentice L.H., Tyas M.J., and Burrow M.F. The effect of mixing time on the handling and compressive strength of an encapsulated glass-ionomer cement. Dental Materials 21 (2005) 704-708
20. Smales R., and Joyce K. Finished surface texture, abrasion resistance, and porosity of Aspa glass-ionomer cement. The Journal of Prosthetic Dentistry 40 (1978) 549-553
21. McKinney J.E., Antonucci J.M., and Rupp N.W. Wear and microhardness of glass-ionomer cements. Journal of Dental Research 66 (1987) 1134-1139
22. Crisp S., Lewis B.G., and Wilson A.D. Characterisation of glass-ionomer cements. 2. Effect of the powder:liquid ratio on the physical properties. Journal of Dentistry 4 (1976) 287-290
23. Hill R.G., Wilson A.D., and Warrens C.P. The influence of poly(acrylic acid) molecular weight on the fracture toughness of glass-ionomer cements. Journal of Materials Science 24 (1989) 363-371
24. Wilson A.D., Hill R.G., Warrens C.P., and Lewis B.G. The influence of polyacid molecular weight on some properties of glass-ionomer cements. Journal of Dental Research 68 (1989) 89-94
25. Crisp S., Kent B.E., Lewis B.G., Ferner A.J., and Wilson A.D. Glass-ionomer cement formulations. II. The synthesis of novel polycarobxylic acids. Journal of Dental Research 59 (1980) 1055-1063
26. Crisp S., Lewis B.G., and Wilson A.D. Characterisation of glass-ionomer cements. 3. Effect of polyacid concentration on the physical properties. Journal of Dentistry 5 (1977) 51-56
27. Wilson A.D., Crisp S., and Abel G. Characterisation of glass-ionomer cements 4. Effect of molecular weight on physical properties. Journal of Dentistry 5 (1977) 117-120
28. Prosser H.J., Powis D.R., and Wilson A.D. Characterisation of glass-ionomer cements 7. The physical properties of current materials. Journal of Dentistry 12 (1984) 231-240
29. Billington R.W., Williams J.A., and Pearson G.J. Variation in powder/liquid ratio of a restorative glass-ionomer cement used in dental practice. British Dental Journal 169 (1990) 164-167
30. Fleming G.J.P., Marquis P.M., and Shortall A.C.C. The influence of clinically induced variability on the distribution of compressive fracture strengths of a hand-mixed zinc phosphate dental cement. Dental Materials 15 (1999) 87-97
31. Fleming G.J.P., Farooq A.A., and Barralet J.E. Influence of powder/liquid mixing ratio on the performance of a restorative glass-ionomer dental cement. Biomaterials 24 (2003) 4173-4179
32. Mount G.J. Glass-ionomer materials. In: Mount G.J., and Hume W.R. (Eds). Preservation and restoration of tooth structure. 2nd ed. (2005), Knowledge books and software, Brisbane 163-198
33. Eames W.B., Monroe S.D., Roan J.D., and O'Neal S.J. Proportioning and mixing of cements: a comparison of working times. Operative Dentistry 2 (1977) 97-104
34. Fleming G.J.P., Shelton R.M., Landini G., and Marquis P.M. The influence of mixing ratio on the toughening mechanisms of a hand-mixed zinc phosphate dental cement. Dental Materials 17 (2001) 14-20
35. Fleming G.J.P., Shortall A.C.C., Shelton R.M., and Marquis P.M. Encapsulated versus hand-mixed zinc phosphate dental cement. Biomaterials 20 (1999) 2147-2153
36. Nomoto R., Komoriyama M., McCabe J.F., and Hirano S. Effect of mixing method on the porosity of encapsulated glass ionomer cement. Dental Materials 20 (2004) 972-978
37. Fleming G.J.P., and Zala D.M. An assessment of encapsulated versus hand-mixed glass ionomer restoratives. Operative Dentistry 28 (2003) 168-177
38. Nomoto R., and McCabe J.F. Effect of mixing methods on the compressive strength of glass ionomer cements. Journal of Dentistry 29 (2001) 205-210
39. Lloyd C.H., and Mitchell L. The fracture toughness of tooth coloured restorative materials. Journal of Oral Rehabilitation 11 (1984) 257-272
40. Condon J.R., and Ferracane J.L. A new multi-mode oral wear simulator. Dental Materials 12 (1996) 218-226
41. De Gee A.J., Pallav P., and Davidson C.L. Effect of abrasion medium on wear of stress-bearing composites and amalgam in vitro. Journal of Dental Research 65 (1986) 654-658
42. Condon J.R., and Ferracane J.L. Factors effecting dental composite wear in vitro. Journal of Biomedical Materials Research 38 (1997) 303-313
43. Condon J.R., and Ferracane J.L. In vitro wear of composite with varied cure, filler level and filler treatment. Journal of Dental Research 76 (1997) 1405-1411
44. Dowling A.H., and Fleming G.J.P. The impact of montmorillonite clay addition on the in vitro wear resistance of a glass-ionomer restorative. Journal of Dentistry 35 (2007) 309-317
45. Dowling A.H., and Fleming G.J.P. Is encapsulation of posterior glass-ionomer restoratives the solution to clinically induced variability introduced on mixing?. Dental Materials 24 (2008) 957-966
46. Fleming G.J.P., Landini G., and Marquis P.M. Properties of encapsulated and hand-mixed zinc phosphate dental cement. American Journal of Dentistry 15 (2002) 91-96
47. Lohbauer U., Pelka M., Frankenberger R., and Kramer N. Influence of mixing procedures on wear resistance of glass ionomer cements. Journal of Dental Research 78 (1999) 229 (Abstr. No. 988)
48. Lipson C., and Sheth N.J. Statistical distributions. In: Lipson C., and Sheth N.J. (Eds). Statistical design and analysis of engineering experiments (1973), McGraw-Hill, New York 372-415
49. Brune D., and Smith D. Microstructure and strength properties of silicate and glass ionomer cements. Acta Odontologica Scandinavica 40 (1982) 389-396
50. Bayne S.C., Taylor D.F., and Heymann H.O. Protection hypothesis for composite wear. Dental Materials 8 (1992) 305-309