The results do mesh: Applications of dynamic mesh reluctance modeling in studies of induction motor drive faults

IEEE Industry Applications Magazine

Volumn 13, Issue 2, 2007, Pages 62-72

  Gerada, C ^a   Bradley, K J ^a   Sumner, M ^a   Wheeler, P ^a   Pickering, S ^a   Clare, J ^a   Whitley, C ^a   Towers, G ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85008036627     PISSN: 10772618     EISSN: None     Source Type: Journal    
DOI: 10.1109/MIA.2007.322274     Document Type: Article

References (25)

1. S.M.A. Cruz and A.J.M. Cardoso, “Diagnosis of stator itnter-urn short circuits in DTC induction motor drives,” in Proc. 38th IAS Conf., Salt Lake City, Oct. 2002 [CD-ROM}
2. S.M.A. Cruz, A.J.M. Cardoso, and H.A. Toliyat, “New developments in the diagnosis of faults in line-connected and direct torque controlled induction motors,” in Proc. 29th Annual IECON'03, Nov. 2003 [CD-ROM}
3. A. Stavrou, H.G. Sedding, and J. Penman, “Current monitoring for detecting inter-turn short circuits in induction motors,” IEEE Trans. Energy Conversion, vol. 16, no. 1, pp. 32–37, Mar. 2001
4. G.M. Joksimovic and J. Penman, “The detection of inter-turn short circuits in the stator windings of operating motors,” IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1078–1084, Oct. 2000
5. B.A. Welchko, T.M. Jahns, and S. Hiti, “IPM synchronous machine drive response to a single-phase open circuit fault,” IEEE Trans. Power Electron., vol. 17, no. 5, pp. 764–771, Sept. 2002
6. J. Penman, H.G. Sedding, B.A. Lloyd, and W.T. Fink, “Detection and location of interturn short circuits in the stator windings of operating motors,” IEEE Trans. Energy Conversion, vol. 9, no. 4, pp. 652–658, Dec. 1994
7. B.A. Welchko, T.A. Lipo, T.M. Jahns, and S.E. Schulz, “Fault tolerant three-phase AC motor drive topologies; A comparison of features, cost, and dimitations,” in Proc. Electric Machines and Drives Conf. IEMDC'03, vol. 1, pp. 539–546, June 2003
8. J.A. Haylock, B.C. Mecrow, A.G. Jack, and D.J. Atkinson, “Operation of fault tolerant machines with winding failures,” IEEE Trans. Energy Conversion, vol. 14, no. 4, pp. 1490–1495, Dec. 1999
9. K. Gi-Taek and T.A. Lipo, “VSI-PWM rectifier/inverter system with a reduced switch count,” IEEE Trans. Ind. Applicat., vol. 32, no. 6, pp. 1331-1337, Nov.-Dec. 1996
10. A.G. Jack, B.C. Mecrow, and J.A. Haylock, “A comparative study of permanent magnet and switched reluctance motors for high-performance fault-tolerant applications,” IEEE Trans. Ind. Applicat., vol. 32, no. 4, pp. 889–895, July-Aug. 1996
11. C. Gerada, K.J. Bradley, M. Sumner, and P. Sewell, “Evaluation of a vector controlled induction motor drive using the dynamic magnetic circuit model,” in Proc. 38th IAS Conf, Salt Lake City, UT, Oct. 2002 [CD-ROM}
12. V. Ostovic, “A method for evaluation of transient and steady state performance in saturated squirrel cage induction machines,” IEEE Trans. Energy Conversion, vol. 1, no. 3, Sept. 1986
13. H. Meshgin-Kelk, J. Milimonfared, and H.A. Toliyat, “Interbar currents and axial fluxes in healthy and faulty induction motors,” IEEE Trans. Ind. Applicat., vol. 40, no. 1, pp. 128–134, Jan.-Feb. 2004
14. Xu Huangsheng, H.A. Toliyat, and L.J. Petersen, “Rotor field oriented control of five-phase induction motor with the combined fundamental and third harmonic currents,” in Proc. Applied Power Electronics Conf. and Expo. (APEC 2001), vol. 1, pp. 392–398, Mar. 4-8, 2001
15. C. Hodge, S. Williamson, and S. Smith, “Direct drive marine propulsion,” in Proc. ICEM Conf., Brugge, 2002 [CD-ROM]
16. E. Levi, A. Iqbal, S.N. Vukosavic, and H.A. Toliyat, “Modeling and control of a five-phase series-connected two-motor drive,” 29th Annual IECON'03, Nov. 2003 [CD-ROM]
17. H.A. Toliyat and T.A. Lipo, “Transient analysis of cage induction motors under stator, rotor bar and end ring faults,” IEEE Trans. Energy Conversion, vol. 10, no. 2, pp. 241–247, June 1995
18. X. Luo, Y. Liao, H.A. Toliyat, A. El-Antably, and T.A. Lipo, “Multiple coupled circuit modeling of induction machines,” IEEE Trans. Ind. Applicat., vol. 31, no. 2, pp. 311–318, Mar.-Apr. 1995
19. J.O. Ojo, A. Consoli, and T.A. Lipo, “An improved model of saturated induction machines,” IEEE Trans. Ind. Applicat., vol. 26, no. 2, pp. 212–221, Mar.-Apr. 1990
20. V. Ostovic, “A simplified approach to magnetic equivalent-circuit modelling of induction machines,” IEEE Trans. Ind. Applicat., vol. 24, no. 2. pp. 308–316, Mar.-Apr. 1998
21. K.J. Bradley and A. Tami, “Reluctance mesh modelling of induation motors with healthy and faulty rotors,” in Proc. 31st IAS Ann. Meeting, pp. 625–632, Oct. 1996
22. G.R. Slemon, “An equivalent circuit approach to analysis of synchronous machines with saliency and saturation,” IEEE Trans. Energy Conversion, vol. 5, no. 3, Sept. 1990
23. H.A. Toliyat, M.M. Rahimian, S. Bhattacharya, and T.A. Lipo, “Transient analysis of induction machines under internal faults using winding functions,” in Proc. 3rd Int. Conf. Electrical Rotating Machines-ELROMA'92, Bombay, Jan. 1992
24. T. Liu, J. Fu, and T.A. Lipo, “A strategy for improving reliability of field oriented controlled induction motor drives,” IEEE Trans. Ind. Applicat., vol. 29, no. 5, pp. 910–918, Sept.-Oct. 1993
25. H.A. Toliyat, “Analysis and simulation of five-phase variable-speed induction motor drives under asymmetrical connections,” IEEE Trans. Power Electron., vol. 13, no. 4, pp. 748–756, July 1998