Smart machine advances in rotating machinery

Institution of Mechanical Engineers - 9th International Conference on Vibrations in Rotating Machinery

Volumn 1, Issue , 2008, Pages 3-14

  Maslen, E H ^a  

^a UNIVERSITY OF VIRGINIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROL SYSTEM ANALYSIS; CONTROL THEORY; LATTICE VIBRATIONS; MACHINERY; ROTATION; VIBRATIONS (MECHANICAL);

ACTIVE CONTROLS; ROTATING MACHINES; SMART MACHINES;

ROTATING MACHINERY;

EID: 57349168521     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (58)

1. M. Aenis, E. Knopf, and R. Nordmann. Active magnetic bearings for the identication and fault diagnosis in turbomachinery. Mechatronics, 12:1011-1021, 2002.
2. Martin Aenis and Rainer Nordmann. Fault diagnosis in rotating machinery using active magnetic bearings. In Proceedings of ISMB8 - International Symposium on Magnetic Bearings, Mito, Japan, 2002.
3. D.K. Anand and M. Anjanappa. Accuracy enhanced machining with a magnetic spindle. In Intelligent Components and Instruments for Control Applications. Selected Papers from the IFAC Symposium, pages 287-291, 1993.
4. A.M. Annaswamy and A.F. Ghoniem. Active control of combustion instability: theory and practice. IEEE Control Systems Magazine, 22(6):37-54, December 2002.
5. G. L. Arnulfi, F. Blanchini, P. Giannattasio, D. Micheli, and P. Pinamonti. Extensive study on the control of centrifugal compressor surge. Proceedings of the Institution of Mechanical Engineers, Part A, 220:289-304, 2006.
6. D. O. Baun and R. D. Flack. Plexiglas research pump with calibrated magnetic bearings/load cells for radial and axial hydraulic force measurement. Journal of Fluids Engineering, Transactions of the ASME, 121(1):126-132, March 1999.
7. D.E. Bently, T. Eldridge, J. Jensen, and P. Mol. Externally pressurized bearings allow rotor dynamic optimization. VDI Berichte, 1640:49-61, 2001.
8. K.K. Borros and J.F. Henderson. Developments in centrifugal compressor surge control - a technology assessment. Journal of Turbomachinery, Transactions of the ASME, 116(2):240-249, April 1994.
9. M.J. Braun, F.K. Choy, M. Dzodzo, J. Hsu, R. Veillette, and D. Deckler. Theoretical and numerical development of the concept of the active control foil bearing (ACFB). In Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, number 95-GT-172. ASME, June 1995.
10. Royce Brown. Compressors: Selection and Sizing. Elsevier, 2005.
11. Iain S. Cade, Patrick S. Keogh, and M. Necip Sahinkaya. Fault identification in rotor/magnetic bearing systems using discrete time wavelet coefficients. IEEE/ASME Transactions on Mechatronics, 10(6):648-657, December 2005.
12. Z. Cai, M.S. deQueiroz, and M.M. Khonsari. On the active stabilization of tilting-pad journal bearings. Journal of Sound and Vibration, 273:421-428, 2004.
13. Min Chen and C.R. Knospe. Control approaches to the suppression of machining chatter using active magnetic bearings. IEEE Transactions on Control Systems Technology, 15(2):220-232, March 2007.
14. Nicolas Docquier and Sébastien Candel. Combustion control and sensors: a review. Progress in Energy and Combustion Science, 28:107-150, 2002.
15. A. El-Shafei and A.S. Dimitri. Controlling journal bearing instability using active magnetic bearings. In Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air, volume 5, pages 983-994, Montreal, Que., Canada, May 2007. ASME.
16. Jan Tommy Gravdahl, Olav Egeland, and Svein Ove Vatland. Drive torque actuation in active surge control of centrifugal compressors. Automatica, 38:1881-1893, 2002.
17. Itzhak Green and Cody Casey. Crack detection in a rotor dynamic system by vibration monitoring - part i: Analysis. Journal of Engineering for Gas Turbines and Power, 127(2):425-436, April 2005.
18. Yong-Yong He, Satoko Oi, Fu-Lei Chu, and Han-Xiong Li. Vibration control of a rotorbearing system using shape memory alloy: I. theory. Smart Materials and Structures, 16:114-121, 2007.
19. Yong-Yong He, Satoko Oi, Fu-Lei Chu, and Han-Xiong Li. Vibration control of a rotorbearing system using shape memory alloy: Ii. experimental study. Smart Materials and Structures, 16:122-127, 2007.
20. Raoul Herzog, Philipp Buhler, Conrad Gahler, and René Larsonneur. Unbalance compensation using generalized filters in the multivariable feedback of magnetic bearings. IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 4(5):580-586, September 1996.
21. J. Hesselbach and C. Abel-Keilhack. Active hydrostatic bearing with magnetorheological uid. Journal of Applied Physics, 93(10):8441-8443, May 2003.
22. Y. Ishida and T. Inoue. Detection of a rotor crack using a harmonic excitation and nonlinear vibration analysis. Transactions of the ASME. Journal of Vibration and Acoustics, 128(6):741-749, December 2006.
23. R.D. Widdle Jr., C.M. Krousgrill Jr., and S.D. Sudhoff. An induction motor model for high-frequency torsional vibration analysis. Journal of Sound and Vibration, 290:865-881, 2006.
24. M. Kasarda, T. Bash, D. Quinn, G. Mani, D. Inman, and R. G. Kirk. A new approach for health monitoring and detection of a shaft crack using an active magnetic actuator during steady-state rotor operation. In ASME Turbo Expo 2007: Power for Land, Sea and Air, Montreal, Canada, 2007.
25. M.E. Kasarda, J. Marshall, and R. Prins. Active magnetic bearing based force measurement using the multi-point technique. Mechanics Research Communications, 34:44-53, 2007.
26. M.E.F. Kasarda, H. Mendoza, R.G. Kirk, and A. Wicks. Reduction of subsynchronous vibrations in a single-disk rotor using an active magnetic damper. Mechanics Research Communications, 31:689-695, 2004.
27. Chang-Eob Kim, Yong-Bae Jung, Sang-Baeck Yoon, and Dal-Ho Im. The fault diagnosis of rotor bars in squirrel cage induction motors by time-stepping finite element method. IEEE Transactions on Magnetics, 33(2):2131-2134, March 1997.
28. Carl R. Knospe and Samir M. Tamer. Experiments in robust control of rotor unbalance response using magnetic bearings. Mechatronics, 7(1):217-229, 1997.
29. C.R. Knospe, R.L. Fittro, and L.S. Stephens. Control of a high speed machining spindle via μ-synthesis. In Proceedings of the 1997 IEEE International Conference on Control Applications, pages 912-917, October 1997.
30. Janusz M. Krodkiewski and Gregory J. Davies. Modelling a new three-pad active bearing. In Proceedings of the ASME Turbo Expo 2004, volume 6, pages 799-808, Vienna, Austria, June 2004. ASME.
31. P. Kytka, C. Ehmann, and R. Nordmann. Active vibration damping of a flexible structure in hydrostatic bearings. In Mechatronics 2006.4th IFAC Symposium on Mechatronic Systems, volume 6, pages 656-661, Heidelberg, Germany, September 2006.
32. Jeong-Bae Lee and Kyung-Woong Kim. Effects of synchronous vibration of bearing on stability of externally pressurized air journal bearings. Journal of Tribology, Transactions of the ASME, 121(4):830-835, October 1999.
33. M. Li and L. Yu. Analysis of the coupled lateral torsional vibration of a rotorbearing system with a misaligned gear coupling. Journal of Sound and Vibration, 243(2):283-300, 2001.
34. F.L. Mapelli and M. Matuonto. Suppression of torsional vibrations in industrial inverter drives using a state observer. In Proceedings of PEMC '96: 7th International Power Electronics and Motion Control Conference, Exhibition, Tutorials, volume 2, pages 268-272, Budapest, Hungary, 1996.
35. R. J. McKee and D. M. Deffenbaugh. Increased flexibility of turbo-compressors in natural gas transmission through direct surge control, annual report, October 2003-december 2004. Technical Report DE2005836735, NTIS / National Energy Technology Lab., Morgantown, WV, December 2004.
36. G. T. Montague. High-temperature hybrid rotor support system developed. Technical Report N20050215265, NTIS / Army Research Laboratory, May 2004.
37. A.S. Morgans and A.P. Dowling. Model-based control of combustion instabilities. Journal of Sound and Vibration, 299:261-282, 2007.
38. R. Nicoletti and I.F. Santos. Linear and non-linear control techniques applied to actively lubricated journal bearings. Journal of Sound and Vibration, 260:927-947, 2003.
39. T. W. Nye. Active control of bearing preload using piezoelectric translators. In 24th Aerospace Mechanisms Symposium, pages 259-271. NASA, John F. Kennedy Space Center, 1990.
40. J. M. Pacas, Armin John, and Thomas Eutebach. Automatic identification and damping of torsional vibrations in high-dynamic-drives. In Proceedings of ISIE'2000, pages 201-206, Cholula, Puebla, Mexico, 2000.
41. J.C. Rama. Supplemental guidelines for use with api standard 541 when specifying motors for use with adjustable speed drives. In Petroleum and Chemical Industry Conference, 1993, Record of Conference Papers. The Institute of Electrical and Electronics Engineers Incorporated. Industry Applications Society 40th Annual, pages 81-88, September 1993.
42. Byoung-Hoo RHO and Kyung-Woong KIM. A study on stability characteristics of actively controlled hydrodynamic journal bearings. JSME International Journal Series C, 45(1):239-245, 2002.
43. P. N. Saavedra and D. E. Ramirez. Vibration analysis of rotors for the identification of shaft misalignment part 1: theoretical analysis. Proc. Instn Mech. Engrs Part C: J. Mechanical Engineering Science, 218:971-985, 2004.
44. Dorsa Sanadgol and Eric Maslen. Backstepping for active control of surge in unshrouded centrifugal compressors with magnetic thrust bearing actuation. In Proceedings of the ASME Turbo Expo 2005, volume 4, pages 883-889, June 2005.
45. limar F. Santos and Flavio Y. Watanabe. Lateral dynamics and stability analysis of a gas compressor supported by hybrid and active lubricated multirecess journal bearing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 28(4):485-495, October/December 2006.
46. J.T. Sawicki, A.L. Gyekenyesi, and G.Y. Baaklini. Analysis of transient response of cracked flexible rotor. In Proceedings of the SPIE - The International Society for Optical Engineering, volume 5393, pages 142-150, 2004.
47. S.G. Scheidler and L. Fottner. Experimental operating range extension of a twinspool turbofan engine by active stability control measures. Transactions of the ASME. Journal of Engineering for Gas Turbines and Power, 128:20-28, January 2006.
48. G. Schweitzer, H. Bleuler, and A. Traxler. Active Magnetic Bearings. Hochschulverlag AG an der ETH Zurich, 1994.
49. Z.S. Spakovszky, J.D. Paduano, R. Larsonneur, A. Traxler, and M.M. Bright. Tip clearance actuation with magnetic bearings for high-speed compressor stall control. Journal of Turbomachinery, 123(3):464-472, July 2001.
50. J. J. Trudell, A. F. Kascak, A. J. Provenza, and C. J. Buccieri. Conical magnetic bearings developed for active stall control in gas turbine engines. Technical Report N20050215277, NTIS / NASA Glenn Research Center, May 2004.
51. C. VanSchalkwyk, M. M. Bright, K. L. Suder, A. J. Straziar, and S. A. Thorp. Active control of rotating stall demonstrated for a multistage compressor with inlet distortion. Technical Report N20050196613, NTIS, March 2001.
52. J. Wauer. On the dynamics of cracked rotors: a literature survey. Applied Mechanics Reviews, 43:13-17, 1990.
53. Ge Wei-ping, Qi Nai-ming, and Liu-Tun. Parameter optimization and analysis of static characteristics for active aerostatic bearing. Journal of Nanjing University of Science and Technology, 31(3):308-311, June 2007.
54. T.M. Wolbank, J.L. Machl, R. Woehrnschimmel, and R. Schneiderbauer. Lowcost inverter based detection of rotor faults in induction machines for quality management systems. In Proceedings of IECON 2004 - 30th Annual Conference of IEEE Industrial Electronics Society, volume 1, pages 324-329, 2004.
55. Zhang YanPing, Huang ShuHong, Hou JingHong, Shen Tao, and Liu Wei. Continuous wavelet grey moment approach for vibration analysis of rotating machinery. Mechanical Systems and Signal Processing, 20:1202-21220, 2006.
56. JJ. Yu, D.E. Bently, P. Goldman, K.P. Dayton, and B.G. Van Slyke. Rolling element bearing defect detection and diagnostics using displacement transducers. Transactions of the ASME. Journal of Engineering for Gas Turbines and Power, 124(3):517-527, July 2002.
57. Changsheng Zhu, D.A. Robb, and D.J. Ewins. The dynamics of a cracked rotor with an active magnetic bearing. Journal of Sound and Vibration, 265:469-487, 2003.
58. E. Zio, P. Baraldi, and G. Gola. Ensemble feature selection for diagnosing multiple faults in rotating machinery. Proc. IMechE Part O: J. Risk and Reliability, 221:29-41, 2007.