Crack detection in a rotor dynamic system by vibration monitoring - Part I: Analysis

Journal of Engineering for Gas Turbines and Power

Volumn 127, Issue 2, 2005, Pages 425-436

  Green, Itzhak ^a   Casey, Cody ^b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b SCHLUMBERGER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACKS; FATIGUE OF MATERIALS; HARMONIC ANALYSIS; MONITORING; ROTATION; SHAFTS (MACHINE COMPONENTS); VIBRATIONS (MECHANICAL);

LOCAL SYMMETRY CRACK MODELS; ROTOR DYNAMIC SYSTEMS; SYSTEM RESPONSES; VIBRATION MONITORING;

ROTORS;

CRACK DETECTION;

EID: 19144368398     PISSN: 07424795     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1789514     Document Type: Article

References (37)

1. Zou, M., Dayan, I., and Green, I., 2000, "Dynamic Simulation and Monitoring of a Non-Contacting Flexibly Mounted Rotor Mechanical Face Seal," IMechE, Proc. Inst. Mech. Eng. 214(C9), Part C, pp. 1195-1206.
2. Lee, A. S., and Green, I., 1994, "Rotordynamics of a Mechanical Face Seal Riding on a Flexible Shaft," ASME J. Tribol., 116(2), pp. 345-351.
3. Lee, A. S., and Green, L, 1994, "Higher Harmonic Oscillations in a Noncontacting FMR Mechanical Face Seal Test Rig," ASME J. Vibr. Acoust., 116(2), pp. 161-167.
4. Lee, A. S., and Green, 1., 1995, "An Experimental Investigation of the Steady-State Response of a Noncontacting Flexibly Mounted Rotor Mechanical Face Seal," ASME J. Tribol., 117(1), pp. 153-159.
5. Lee, A. S., and Green, L, 1995, "Physical Modeling and Data Analysis of the Dynamic Response of a Flexibly Mounted Rotor Mechanical Seal," ASME J. Tribol., 117, pp. 130-135.
6. Zou, M., and Green, I., 1999, "Clearance Control of a Mechanical Face Seal," STLE Tribol. Trans., 42, pp. 535-540.
7. Zou, M., Dayan, J., and Green, I., 1999, "Parametric Analysis of Contact Control of a Noncontacting Mechanical Face Seal," in Proceedings of Vibration, Noise and Structural Dynamics, pp. 493-499, April.
8. Dayan, J., Zou, M., and Green, I., 2000, "Sensitivity Analysis for the Design and Operation of a Noncontacting Mechanical Face Seal," IMechE, Proc. Inst. Mech. Eng. 214(C9), Part C, pp. 1207-1218.
9. Zou, M., Dayan, J., and Green, L, 2000, "Feasibility of Contact Elimination of a Mechanical Face Seal Through Clearance Adjustment," ASME J. Eng. Gas Turbines Power, 122, pp. 478-484.
10. Dayan, J., Zou, M., and Green, I., 1999, "Contact Elimination in Mechanical Face Seals Using Active Control, in Proceedings of the IEEE 7th Mediterranean Conference on Control and Automation (MED99), pp. 618-619, June.
11. Tondl, A., 1965, Some Problems in Rotor Dynamics, Czechoslovakian Academy of Sciences, Chapman & Hall, London.
12. Henry, T. A., and Okah-Avae, B. E., 1976, "Vibrations in Cracked Shafts," in Conference on Vibrations in Rotating Machinery, pp. 15-19.
13. Murray, D. B., and McCraith, J. R., 1984, "Vibrational Method for the Detection of Cracks in Rotating Shafts," in First Parsons International Turbine Conference, pp. 229-236.
14. Rao, J. S., 1991, Rotor Dynamics, 2nd edition, Wiley, New York.
15. Gasch, R., 1976, "Dynamic Behavior of Simple Rotor With a Cross-Sectional Crack," in Conference on Vibrations in Rotating Machinery, p. 123.
16. Mayes, I. W., and Davies, W. G. R., 1976, "The Vibrational Behavior of a Rotating Shaft System Containing a Transverse Crack," in Conference on Vibrations in Rotating Machinery, pp. 53-64.
17. Imam, I., and Azzaro, S. H., 1989, "Development of an On-Line Rotor Crack Detection and Monitoring System," ASME J. Vib., Acoust., Stress, Reliab. Des., 111(3), pp. 241-250.
18. Huang, S. C., Huang, Y M., and Shieh, S. M., 1993, "Vibration and Stability of a Rotating Shaft Containing a Transverse Crack, J. Sound Vib., 162, pp. 387-401.
19. Tsai, T., and Wang, W., 1998, "Vibration of a Rotor With a Transverse Open Crack," Proc. Natl. Sci. Counc., Repub. China, Part A: Phys. Sci. Eng., 22, pp. 372-384.
20. Grabowski, B., 1980, "The Vibrational Behavior of a Turbine Rotor Containing a Transverse Crack," ASME J. Mech. Des., 121, pp. 140-146.
21. Dimarogonas, A. D., and Paipetis, S. A., 1983, Analytical Methods in Rotor Dynamics, Applied Science.
22. Herbert, R. G., 1987, "Turbine-Alternator Run-Down Vibration Analysis: Automated Crack Detection," in 11th Biennial Conference on Mechanical Vibration and Noise, Vol. 2, pp. 631-636.
23. Inagaki, T., Kanki, H., and Shiraki, K., 1982, "Transverse Vibrations of a General Cracked-Rotor Bearing System," ASME J. Mech. Des., 104 (2), pp. 345-355.
24. Schmied, J., and Kraemer, E., 1984, "Vibrational Behavior of a Rotor With a Cross-Sectional Crack," in Conference on Vibrations in Rotating Machinery, pp. 183-192.
25. Nelson, H. D., and Nataraj, C., 1986, "The Dynamics of a Rotor System With a Cracked Shaft," ASME J. Vib., Acoust., Stress, Reliab. Des., 108, pp. 189-196.
26. Sofker, D., Bajkowski, J., and Muller, P. C., 1993, "Crack Detection in Turbo Rotors, Vibrational Analysis and Fault Detection," in Conference on Mechanical Vibration and Noise, Vol. 60, pp. 277-287.
27. Meng, G., and Hahn, E. J., 1994, "Dynamic Response of a Cracked Rotor With Some Comments on Crack Detection," in Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, June.
28. Dirt, B. O., and Rothkegel, W., 1994, "Detection and Simulation of Small Transverse Cracks in Rotating Shafts," Arch. Appl. Mech., 64 (3), pp. 206-222.
29. Inagaki, T., Kanki, H., and Shiraki, K., 1980, "Response Analysis of a General Asymmetric Rotor-Bearing," ASME J. Mech. Des., 102(1), pp. 147-157.
30. Dimarogonas, A. D., and Papadopoulos, C. A., 1983, "Vibration of Cracked Shafts in Bending," J. Sound Vib., 91, pp. 583-593.
31. Davies, W. G. R., and Mayes, I. W., 1984, "The Vibrational Behavior of a Multi-Shaft, Multi-Bearing System in the Presence of a Propogating Transverse Crack," ASME J. Vib., Acoust., Stress, Reliab. Des., 106 (1), pp. 146-153
32. Gasch, R., 1993, "A Survey of the Dynamic Behavior of a Simple Rotating Shaft With a Transverse Crack," J. Sound Vib., 160, pp. 313-332.
33. Papadopoulos, C. A., and Dimarogonas, A. D., 1987, "Stability of Cracked Rotors in the Coupled Vibration Mode," in 11th Biennial Conference on Mechanical Vibration and Noise, Vol. 1, pp. 25-34.
34. Papadopoulos, C. A., and Dimarogonas, A. D., 1987, "Coupled Longitudinal and Bending Vibrations of a Rotating Shaft With an Open Crack," J. Sound Vib., 117, pp. 81-93.
35. Casey, C., 2000, "Crack Detection in Rotor Dynamic System by Vibration Monitoring," M.S. thesis, Georgia Institute of Technology.
36. Green, I., and Etsion, I., 1986, "A Kinematic Model for Mechanical Seals With Antirotation Locks or Positive Drive Devices," ASME J. Tribol., 108(1), pp. 42-45.
37. Tada, H., Paris, P. C., and Irwin, G. R., 1985, The Stress Analysis of Cracks Handbook, 2nd Ed., Paris Productions, St. Lous, MO.