Combustion control and sensors: A review

Progress in Energy and Combustion Science

Volumn 28, Issue 2, 2002, Pages 107-150

  Docquier, Nicolas ^a   Candel, Sébastien ^a  

^a LABORATOIRE EM2C   (France)

Author keywords

Active control; Automotive engine control; Combustion control; Gas sensors; Gas turbine control; Optical sensors; Solid state sensors

Indexed keywords

AUTOMOBILE ENGINES; CHEMICAL SENSORS; COMBUSTORS; NITROGEN OXIDES; OPTICAL SENSORS; PARTICULATE EMISSIONS; POLLUTION CONTROL;

ACTIVE COMBUSTION CONTROL (ACC); SOLID STATE SENSORS;

COMBUSTION;

EID: 0036137417     PISSN: 03601285     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0360-1285(01)00009-0     Document Type: Review

References (245)

1. Controlling automotive emissions
2. Cyclic variations and control of a batch-loaded biomass gasifier-combustor
3. Operating point control of gas turbine combustor
4. Active control for gas turbine combustors
5. Active control of combustion for optimal performance
6. Control of thermoacoustic instabilities and emissions in an industrial-type gas turbine combustor
7. x)
8. x combustor
9. x) dans une flamme de diffusion à fioul par excitation acoustique
10. Simultaneous laser-based in-situ detection of oxygen and water in a incinerator for active combustion control purposes
11. Real-time adaptive combustion control using diode-laser absorption sensors
12. Closed-loop amplitude modulation control of reacting premixed turbulent jet
13. Active optimization of the performance of a gas turbine combustor
14. TACCOS - A thermography-assisted combustion control system for incinerators
15. Active control of combustion instabilities in gas turbine engines for low emissions. Part II. Adaptive control algorithm development, demonstration and performance limitations
16. Active instability control with direct-drive servo valves in liquid-fueled combustion systems
17. Active instability control (aic) of spray combustors by modulation of the liquid fuel flow rate
18. Applications of active combustion control to Siemens heavy duty gas turbines
19. Applications of active combustion control to Siemens heavy duty gas turbines
20. Online identification approach for adaptive control of combustion instabilities
21. Optimization of active control systems for suppressing combustion dynamics
22. Optimization of active control systems for suppressing combustion instability
23. Characteristics and control of combustion instabilities in a swirl-stabilized spray combustor
24. An experimental study on active controlled dump combustors
25. Active control of combustion instabilities on a Rijke tube using a neural network
26. Performance enhancement of gas-turbine combustor by active control of fuel injection and mixing process theory and practice
27. Active combustion control in coaxial dump combustor
28. Development of new ion current control combustion control system
29. x trap desulfation through rapid air fuel modulation
30. A study on the transient knock control in a spark-ignition engine
31. Control requirements for the RB 211 low emission combustion system
32. Control of the fuel-air ratio in an automotive engine
33. Optimal idle speed control of an automotive engine
34. Regelung von verbrennungsprozessen mit flammensignalen
35. Wide band SI engine lambda control
36. Motronic MED7 for gasoline direct injection engines: Engine management system and calibration procedures
37. Neural adaptive ignition control
38. The application of ionic current detection system for the combustion limit control
39. Optimization of burners by air-ratio-controlled combustion based on Wobbe number measurement
40. Closed-loop air-fuel ratio control using forced air-fuel ratio modulation
41. Phased air/fuel ratio perturbation - A fuel control technique for improved catalyst efficiency
42. An imaging neural network combustion control system for utility boiler applications
43. Combustion control using multiplexed diode-laser sensor system
44. Study of an optical frequency type combustion control
45. Industrial combustion monitoring using optical sensors
46. Fuel/air control of industrial fiber matrix burners using optical emission
47. Impact of linear coupling on the design of active controllers for the thermoacoustic instability
48. Automotive engine diagnosis and control via nonlinear estimation
49. Liquid-fueled active instability suppression
50. Structure and control of thermoacoustic instabilities and emissions in a gas turbine combustor
51. Experimental investigation of combustion instability in an axisymmetric laboratory ramjet
52. Characterization of oscillations during premix gas turbine combustion
53. Adaptive control of aeroacoustic instabilities with application to propulsion system
54. Active control of instabilities in gas turbines
55. A review of active control of combustion instabilities
56. AGARD workshop on active combustion control for propulsion system
57. Use of chemiluminescence and neural networks in active combustion control
58. Active, optimal control of a model industrial, natural gas-fired burner
59. Combustion enhancement by active control
60. Chemistry and physiology of Los Angeles smog
61. Internal combustion engine fundamentals
62. Zirconium oxide products in automotive systems
63. Current status and prospects for gasoline engine emission control technology - Paving the way for minimal emission
64. Optimization of oxygen sensor
65. A fast light off thimble-type oxygen sensor
66. Compact thick film type oxygen sensor
67. Advanced planar oxygen sensors for future emission control strategies
68. A study of a fast light-off planar oxygen sensor application for exhaust emissions reduction
69. x adsorber function
70. x removal from the exhaust gas of leanburn gasoline engines
71. x and PM legislation
72. High performance diesel catalyst for Europe beyond 1996
73. Gasoline direct injection - A promising engine concept for future demands
74. Second generation platinum RTD exhaust gas temperature sensor for -50°C to 1000°C measurement
75. Performance of a ceramic CO sensor in the automotive exhaust system
76. 2 zirconia sensor based on a potentiometric design
77. Lean premixed combustion for gas-turbines: Review and required research
78. x formation under gas-turbines combustion conditions
79. x premixed combustion of MBtu fuels using the ABB double cone burner (EV burner)
80. x premixed combustion of Mbtu fuels in a research burner
81. Low emission combustor technology (LOWNOXI)
82. x reduction by lean premixed prevaporized combustion
83. Industrial RB211 dry low emission combustion
84. On-engine evaluation of emissions characteristics of a variable geometry lean-premixed combustor
85. Estimating engine airflow in gas-turbine powered aircraft with clean and distorted inlet flows
86. Simultaneous diode-laser-based in-situ-detection of multiple species and temperature in a gas-fired power plant
87. Fiber-optic probe for laser-induced fluorescence measurements of the fuel-air distribution in gas-turbine combustors
88. Measurements of fuel/air-acoustic coupling in lean premixed combustion systems
89. Measurement of equivalence ratio fluctuation and its effect on heat release during unstable combustion
90. Micromachined flow sensor for fuel injection
91. Design and flight qualification of a diode laser-based optical mass flux sensor
92. Flame 3D tomography sensor for in-furnace diagnotics
93. Experimental and numerical study of chemiluminescence in methane/air high pressure flames for active control applications
94. Spatial mapping of flame radical emission using a spectroscopic multi-colour imaging system
95. 2 chemiluminescence in the reaction zone of laminar methane/air premixed flames
96. Interpretation of optical emissions for sensors in liquid fueled combustors
97. Apparatus for studying premixed laminar flames using mass spectrometry and fiber-optic spectrometry
98. OH chemiluminescence as an active control parameter for fuel-lean, high-pressure, premixed, laminar flames
99. Measurement of the local flame-front structure of turbulent premixed flames by local chemiluminescence
100. Measurements of the combustion characteristics of compound clusters in pressure-atomized spray flame
101. Flame signature as a low-cost flame control method
102. Improved method for flame detection in combustion turbines
103. Optical measurements of turbulence and residence time in a gas turbine combustor
104. 2O(ν2): A diagnostic for concentration and temperature
105. 2O and gas temperature
106. 2O in room temperature and combustion gases by use of a broadly current-tuned multi-section diode laser
107. 2O and temperature using diode laser absorption sensors
108. x/oxygen zirconia sensor under lean burn conditions
109. 2-sensor for monitoring and controlling small burners and heaters
110. x sensor based on mixed potential
111. Sensor-based analyzer for continuous emission monitoring in gas pipeline applications
112. Solid-state gas sensors and monitors
113. Ion-gap sense in misfire detection, knock and engine control
114. Fuel and additive influence on the ion current
115. In-cylinder measurement of mixture maldistribution in a 1-head engine
116. A new design of optical in-cylinder pressure sensor for automotive applications
117. Robust control analysis of a gas-burbine aeroengine
118. Modeling and control of combustion instability using fuel injection
119. Application of reduced order model to automotive engine control system
120. Air-fuel ratios from exhaust gas analysis
121. A fortran program for modeling steady laminar one-dimensional premixed flames
122. Approximations for burning velocities and Markstein numbers for lean hydrocarbon and methanol flames
123. Optimization of gas turbine combustor performance throughout the duty cycle
124. Sound emission from open turbulent premixed flames
125. Studies of the mechanism of flame stabilization by a spectral intensity method
126. Effect of turbulence on radiation intensity from propane-air flames
127. In-cylinder air/fuel ratio approximation using spark gap ionization sensing
128. Etude spectrographique d'une flamme stabilisée dans un écoulement
129. Theoretical and experimental determinations of the transfer function of a laminar premixed flame
130. An experimental estimation of mean reaction rate and flame structure during combustion instability in a lean premixed gas turbine combustor
131. Diode-laser absorption technique for simultaneous measurements of multiple gasdynamic parameters in high-speed flows containing water vapor
132. Diode laser-based air mass flux sensor for subsonic aeropropulsion inlets
133. Continuous water vapor mass flux and temperature measurements in a model scramjet combustor using a diode laser sensor
134. Diode-laser sensor for velocity measurements in hypervelocity flows
135. Micromachined elctromechanical sensors for automotive applications
136. Simultaneous water vapor concentration and temperature measurements using 1.31 μm diode lasers
137. Diode-laser based diagnostic to monitor water-vapor in high pressure environments
138. A new sensor system for industrial combustion monitoring and control using UV emission spectroscopy and tomography
139. 4 in combustion flows
140. Tunable diode laser absorption spectroscopy of carbon monoxide around 2.35 μm
141. Detection of carbon monoxide by using zirconia oxygen sensor
142. Highly selective CO sensor using stabilized zirconia and a couple of oxide electrodes
143. 3 electrode-attached zirconia galvanic cell
144. 3 near 2.0 μm
145. 2, near 2.0 μm at elevated temperatures
146. 2 gas sensor using a combined electrolyte of sodium ion conducting glass and stabilized ziconia
147. x determination using galvanic cells with perovskite-electrodes on YSZ
148. x in exhausts
149. Sensors for measuring combustibles in the absence of oxygen
150. Near-IR diode lasers for in-situ measurements of combustor and aeroengine emissions
151. Tunable diode laser measurements on nitric oxide in a hypersonic wind tunnel
152. Absorption measurements of the second overtone band of NO in ambient and combustion gases using a 1.8 micron room temperature diode laser
153. The evolution of a room temperature, near-IR diode laser sensor for combustion-generated NO emissions
154. 2 pumping cell
155. x sensor with integrated in-connector control electronics
156. x sensor based on mixed potential for automobiles
157. 2 based on stabilized ziconia and spinel-type oxide electrodes
158. x in high-temperature combustion-exhausts
159. 2
160. Techniques for measurement of oxygen and air-to-fuel ratio using zirconia sensors - A review
161. A high-sensitivity sensor for the measurement of combustible gas mixtures
162. Solid state potentiometric oxygen gas sensors
163. Oxygen sensor for CNG application as ULEV or tighter emission vehicle
164. Experimental determination of mixture fraction in steady and non-steady axisymmetic, methane/air diffusion flames using tunable diode laser absorption spectroscopy
165. Diode lasers pinpoint pollutants
166. Room temperature diode laser monitors for spacecraft air quality
167. Scanned- and fixed-wavelength absorption diagnostics for combustion using multiplexed diode lasers
168. The HITRAN molecular spectroscopic database and hawks (HITRAN atmospheric workstation): 1996 edition
169. Diode laser absorption sensors for gas-dynamic and combustion flows
170. Absorption measurements of water vapor concentration, temperature, and line-shape parameters using a tunable InGaAsP diode laser
171. Diode laser instrumentation for aeropropulsion applications
172. Diode-laser sensors for real-time control of pulsed combustion systems
173. Frequency modulation and wavelength modulation spectroscopies: Comparison of experimental methods using a lead-salt diode laser
174. Ultra-sensitive dual-beam absorption and gain spectroscopy: Applications for near-IR and visible diode laser sensors
175. Comparison A. of techniques for reconstructing axisymmetric reacting flow fields from absorption measurements
176. Determination of temperature and concentration profiles using (a limited number of) absorption measurements
177. Diagnostics optiques appliqués aux milieux réactifs (diffusion Rayleigh, fluorescence induite par laser, absorption, analyse de la chimiluminescence,...)
178. Numerical and experimental studies of hydroxyl radical chemiluminescence in methane-air flames
179. 2 chemiluminescence in premixed flames
180. Experimental and computational study of CH, CH*, and OH* in an axisymmetric laminar diffusion flame
181. Combustion oscillation analysis of premixed flames at elevated pressures
182. Mechanism of combustion instability in a lean premixed dump combustor
183. Measuring local OH* to analyze flame front movement in a turbulent premixed flame
184. Observation of combustion characteristics of droplet clusters in a premixed-spray flame by simultaneous monitoring of planar spray images and local chemiluminescence
185. Emission tomography of flame radicals
186. Industrial combustion control using UV emission tomography
187. Tomography transform and inverse in geometrical optics
188. Digital image processing in flow visualization
189. Modern optical techniques in fluid mechanics
190. Investigation of cryogenic propellant flames using computerized tomography of OH emission images
191. Light scattering and extinction coefficients for soot forming flames in the wavelength range from 200 nm to 600 nm
192. Spectral extinction coefficients of soot aggregates from turbulent diffusion flames
193. Quantitative analysis of in-situ optical diagnostics for inferring particle/aggregate parameters in flames: Implications for soot surface growth and total emissivity
194. Optical constants of soot in hydrocarbon flames
195. The emissivity of luminous flames
196. Optical constants of soot and their application to heat flux calculations
197. Simultaneous optical measurement of soot volume fraction and temperature in premixed flames
198. Optical and spectroscopic diagnostics for the study of laminar partially premixed injectors and natural gas boilers
199. FT-IR emission/transmission spectroscopy for in situ combustion diagnostics
200. Analysis of aircraft exhausts with Fourier-transform infrared emission spectroscopy
201. Gas turbine exhaust emissions monitoring using nonintrasive infrared spectroscopy
202. Flame analysis by IR thermography and IR hyperspectral imaging
203. Combustion monitoring sensor using tin dioxide semiconductor
204. Capteurs de gas à semiconducteur céramique. application à l'étude des processus de combustion et au contrôle de la pollution atmosphérique
205. Semiconductor gas sensors for the monitoring of combustion emissions
206. Effect of aging on yttria-stabilized zirconia. I. A study of its electrochemical properties
207. 2 thin films
208. Gas analysis with potentiometric sensors - A review
209. Gas-diffusion-controlled solid-electrolyte oxygen sensors
210. Planar-type, gas diffusion-controlled oxygen sensor fabricated by the plasma spray method
211. Theory and simulation of solid-electrolyte wide-range sensors for combustion-gas streams
212. Physical principles governing the nonideal behavirour of the zirconia oxygen sensor
213. Carbon monoxide gas sensor made of stabilized zirconia
214. Non-Nernstian potentiometric zirconia sensors: Screening of potential working electrode materials
215. Non-Nernstian zirconia sensors for combustion control
216. x sensor based on stabilized zirconia and oxide electrode
217. x sensor
218. x concentration
219. Solid electrolytes for gas sensing at high temperatures, multi electrode setup to analyse gas mixtures
220. Sensing characteristics and mechanism of hydrogen sulfide sensor using stabilized zirconia and oxide sensing electrode
221. The variation of ionization with air/fuel ratio for a spark-ignition engine
222. Measuring ignition and combustion by detecting ionization current
223. In-cylinder pressure measurements using the spark plug as an ionization sensor
224. Effects of electric fields on flames
225. Ion production and recombination in flames
226. Simulation of electric field effects in premixed methane flames
227. An ionization equilibrium analysis of the spark plug as an ionization sensor
228. Investigations on ions in flames
229. Closed loop ignition control by ionization current interpretation
230. Local air-fuel ratio measurements using the spark plug as an ionization sensor
231. High DI detection via exhaust gas temperature measurement for ULEV
232. Fiber optic smart structures
233. Spectroscopy and hybrid neural network analysis
234. Global predictive and optimal control applied to automotive engine management
235. Gas turbine engine and sensor fault diagnosis using optimization techniques
236. An artificial uego sensor for engine cold start-methodology, design and performance