Influence of the additional Er:YAG laser conditioning step on the microleakage of class V restorations

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 87, Issue 2, 2008, Pages 538-543

  Esteves Oliveira, Marcella ^a   Carvalho, Wendell L ^b   Eduardo, Carlos De P ^a   Zezell, Denise M ^c  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

^b FEDERAL UNIVERSITY OF RIO GRANDE DO NORTE   (Brazil)

^c INSTITUTO DE PESQUISAS ENERGÉTICAS E NUCLEARES   (Brazil)

Author keywords

Dentin; Enamel; Er:YAG laser; Laser cavity preparation; Self etching primer system

Indexed keywords

ABS RESINS; ERBIUM; LASER RESONATORS; NITRATES; REPAIR; RESINS; RESTORATION; SILVER; SILVER ALLOYS;

BOVINE INCISORS; CAVITY PREPARATIONS; CLASS V; COMPOSITE RESINS; COMPOSITE RESTORATIONS; DENTIN; ER:YAG LASER; ER:YAG LASERS; FOUR GROUPS; LASER CAVITIES; LASER CAVITY PREPARATION; MICROLEAKAGE; PAIR-WISE COMPARISONS; SELF-ETCHING PRIMER SYSTEM; SILVER NITRATE SOLUTIONS; SILVER NITRATES;

LASERS;

RESIN; SILVER NITRATE;

ANIMAL TISSUE; ARTICLE; COMPOSITE MATERIAL; CONTROLLED STUDY; GINGIVA; INCISOR; NONHUMAN; YAG LASER;

ADHESIVENESS; LASERS, SOLID-STATE;

EID: 55049110851     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31141     Document Type: Article

References (47)

1. Hibst R, Keller U. Experimental studies of the application of the Er:YAG laser on dental hard substances. I. Measurement of the ablation rate. Lasers Surg Med 1989;9:338-344.
2. 2 laser pulses of 5-100-μs duration. Lasers Surg. Med 2002;31:275-282.
3. Fried D. IR laser ablation of dental enamel. In: Featherstone JDB, Rechmann P, Fried D, editors. In the Proceedings of SPIE. International Society for Optical Engineering Vol. 3910. San Jose, USA; 2000. pp 136-148.
4. Fried D, Zuerlein M, Featherstone JDB, Seka W, Duhn C, McCormack SM. IR laser ablation of dental enamel: Mechanistic dependence on the primary absorber. Appl Surf Sci 1998;129:852-856.
5. Meister J, Franzen R, Forner K, Grebe H, Stanzel S, Lampert F, Apel C. Influence of the water content in dental enamel and dentin on ablation with erbium YAG and erbium YSGG lasers. J Biomed Opt 2006;11:34030.
6. Bachmann L, Gomes ASL, Zezell DM. Bound energy of water in hard dental tissues. Spectrosc Lett 2004;37:565-579.
7. Keller U, Hibst R, Geurtsen W, Schilke R, Heidemann D, Klaiber B, Raab WH. Erbium:YAG laser application in caries therapy. Evaluation of patient perception and acceptance. J Dent 1998;26:649-656.
8. Mehl A, Folwaczny M, Haffner C, Hickel R. Bactericidal effects of 2.94 microns Er:YAG-laser radiation in dental root canals. J Endod 1999;25:490-493.
9. Ando Y, Aoki A, Watanabe H, Ishikawa I. Bactericidal effect of erbium YAG laser on periodontopathic bacteria. Lasers Surg Med 1996;19:190-200.
10. Hibst R, Stock K, Gall R, Keller U. Controlled tooth surface heating and sterilization by Er:YAG laser radiation. In: Altshuler GB, Chiesa F, Geschwind HJ, Hibst R, Krasner N, Laffitte F, Maira G, Neumann R, Pini R, Reidenbach H, et al., editors. In the Proceedings of SPIE. International Society for Optical Engineering Vol. 2922. Vienna, Austria; 1996. pp 119-126.
11. Eberhard J, Eisenbeiss AK, Braun A, Hedderich J, Jepsen S. Evaluation of selective caries removal by a fluorescence feedback-controlled Er:YAG laser in vitro. Caries Res 2005;39:496-504.
12. Moritz A, Schoop U, Goharkhay K, Szakacs S, Sperr W, Schweidler E, Wernisch J, Gutknecht N. Procedures for enamel and dentin conditioning: A comparison of conventional and innovative methods. J Esthet Dent 1998;10:84-93.
13. Moritz A, Gutknecht N, Schoop U, Goharkhay K, Wernisch J, Sperr W. Alternatives in enamel conditioning: A comparison of conventional and innovative methods. J Clin Laser Med Surg 1996;14:133-136.
14. Staninec M, Gardner AK, Le CQ, Sarma AV, Fried D. Adhesion of composite to enamel and dentin surfaces irradiated by IR laser pulses of 0.5-35 micros duration. J Biomed Mater Res B Appl Biomater 2006;79:193-201.
15. Delfino CS, Souza-Zaroni WC, Corona SA, Palma-Dibb RG. Microtensile bond strength of composite resin to human enamel prepared using erbium: Yttrium aluminum garnet laser. J Biomed Mater Res A 2007;80:475-479.
16. Bertrand MF, Semez G, Leforestier E, Muller-Bolla M, Nammour S, Rocca JP. Er:YAG laser cavity preparation and composite resin bonding with a single-component adhesive system: Relationship between shear bond strength and microleakage. Lasers Surg Med 2006;38:615-623.
17. Visuri SR, Gilbert JL, Wright DD, Wigdor HA, Walsh JT Jr. Shear strength of composite bonded to Er:YAG laser-prepared dentin. J Dent Res 1996;75:599-605.
18. Apel C, Gutknecht N. Bond strength of composites on Er:YAG and Er,Cr:YSGG laser-irradiated enamel. In: Altshuler GB, Andersson-Engels S, Birngruber R, Bjerring P, Fercher AF, Geschwind HJ, Hibst R, Hoenigsmann H, Laffitte F, HJS, editors. In the Proceedings of SPIE. International Society for Optical Engineering Vol. 3564. Stockholm; 1999. pp 197-200.
19. Aranha AC, Turbino ML, Powell GL, Eduardo Cde P. Assessing microleakage of class V resin composite restorations after Er:YAG laser and bur preparation. Lasers Surg Med 2005;37:172-177.
20. Pashley DH, Tay FR. Aggressiveness of contemporary self-etching adhesives. II. Etching effects on unground enamel. Dent Mater 2001;17:430-444.
21. Pilo R, Cardash HS. Post-irradiation polymerization of different anterior and posterior visible light-activated resin composites. Dent Mater 1992;8:299-304.
22. Wu W, Cobb E, Dermann K, Rupp NW. Detecting margin leakage of dental composite restorations. J Biomed Mater Res 1983;17:37-43.
23. Kawaguchi FA, Eduardo CP, Matos AB. Nd:YAG laser influence on microleakage of class V composite restoration. Photomed Laser Surg 2004;22:303-305.
24. Lizarelli RF, Silva PC, Neto ST, Bagnato VS. Study of microleakage at class V cavities prepared by Er:YAG laser using rewetting surface treatment. J Clin Laser Med Surg 2004;22:51-55.
25. Corona SA, Borsatto MC, Pecora JD, De Sarra, Ramos TS, Palma-Dibb RG. Assessing microleakage of different class V restorations after Er:YAG laser and bur preparation. J Oral Rehabil 2003;30:1008-1014.
26. Chinelatti MA, Ramos RP, Chimello DT, Corona SA, Pecora JD, Dibb RG. Influence of Er:YAG laser on cavity preparation and surface treatment in microleakage of composite resin restorations. Photomed Laser Surg 2006;24:214-218.
27. Van Meerbeek B, De Munck J, Mattar D, Van Landuyt K, Lambrechts P. Microtensile bond strengths of an etch and rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent 2003;28:647-660.
28. De Munck J, Van Meerbeek B, Yudhira R, Lambrechts P, Vanherle G. Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin. Eur J Oral Sci 2002;110:322-329.
29. Esteves-Oliveira M, Zezell DM, Apel C, Turbino ML, Aranha AC, Eduardo Cde P, Gutknecht N. Bond strength of self-etching primer to bur cut. Er, Cr:YSGG, and Er: YAG lased dental surfaces. Photomed Laser Surg 2007;25:373-380.
30. Sattabanasuk V, Burrow MF, Shimada Y, Tagami J. Resin adhesion to caries-affected dentine after different removal methods. Aust Dent J 2006;51:162-169.
31. Manhaes L, Oliveira DC, Marques MM, Matos AB. Influence of Er:YAG laser surface treatment and primer application methods on microtensile bond strength self-etching systems. Photomed Laser Surg 2005;23:304-312.
32. Oliveira DC, Manhaes LA, Marques MM, Matos AB. Microtensile bond strength analysis of different adhesive systems and dentin prepared with high-speed and Er: YAG laser: A comparative study. Photomed Laser Surg 2005;23:219-224.
33. Van Landuyt KL, Kanumilli P, De Munck J, Peumans M, Lambrechts P, Van Meerbeek B. Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent 2006;34:77-85.
34. Oliveira SS, Pugach MK, Hilton JF, Watanabe LG, Marshall SJ, Marshall GW Jr. The influence of the dentin smear layer on adhesion: A self-etching primer vs. a total-etch system. Dent Mater 2003;19:758-767.
35. Marraccini TM, Bachmann L, Wigdor HA, Walsh JT, Stabholtz A, Zezell DM. Morphological evaluation of enamel and dentin irradiated with 9.6 mm CO2 and 2.94 mm Er: YAG lasers. Laser Phys Lett 2005;2:551-555.
36. Kidd EA. Microleakage: A review. J Dent 1976;4:199-206.
37. Hilton TJ. Can modern restorative procedures and materials reliably seal cavities? In vitro investigations. I. Am J Dent 2002;15:198-210.
38. Piemjai M, Watanabe A, Iwasaki Y, Nakabayashi N. Effect of remaining demineralised dentine on dental microleakage accessed by a dye penetration: How to inhibit microleakage?. J Dent 2004;32:495-501.
39. Wu W, Cobb EN. A silver staining technique for investigating wear of restorative dental composites. J Biomed Mater Res 1981;15:343-348.
40. Youssef MN, Youssef FA, Souza-Zaroni WC, Turbino ML, Vieira MM. Effect of enamel preparation method on in vitro marginal microleakage of a flowable composite used as pit and fissure sealant. Int J Paediatr Dent 2006;16:342-347.
41. Bachmann L, Diebolder R, Hibst R, Zezell DM. Infrared absorption bands of enamel and dentin tissues from human and bovine teeth. Appl Spectrosc Rev 2003;38:1-14.
42. Reeves GW, Fitchie JG, Hembree JH Jr, Puckett AD. Microleakage of new dentin bonding systems using human and bovine teeth. Oper Dent 1995;20:230-235.
43. Kato J, Moriya K, Jayawardena JA, Wijeyeweera RL. Clinical application of Er: YAG laser for cavity preparation in children. J Clin Laser Med Surg 2003;21:151-155.
44. Keller U, Hibst R. Effects of Er: YAG laser in caries treatment: A clinical pilot study. Lasers Surg Med 1997;20:32-38.
45. Geraldo-Martins VR, Tanji EY, Wetter NU, Nogueira RD, Eduardo CP. Intrapulpal temperature during preparation with the Er: YAG laser: An in vitro study. Photomed Laser Surg 2005;23:182-186.
46. Nair PN, Baltensperger MM, Luder HU, Eyrich GK. Pulpal response to Er: YAG laser drilling of dentine in healthy human third molars. Lasers Surg Med 2003;32:203-209.
47. Dostalova T, Jelinkova H, Hamal K. Evaluation of the cavity margins after Er: YAG laser ablation of the enamel and dentin. In: Bown SG, Escourrou J, Frank F, Geschwind HJ, Godlewski G, Laffitte F, Scherer HH, editors. In the Proceedings of SPIE. International Society for Optical Engineering Vol. 2327; 1994. Lile, France. pp 87-92.