Microtensile bond strength analysis of different adhesive systems and dentin prepared with high-speed and Er:YAG laser: A comparative study

Photomedicine and Laser Surgery

Volumn 23, Issue 2, 2005, Pages 219-224

  Oliveira, Denise Cerqueira ^a,d   Manhães, Lussara Azevedo ^b   Marques, Márcia Martins ^c   Matos, Adriana Bona ^c  

^a DEPARTAMENTO DE CIÊNCIAS BIOLÓGICAS   (Brazil)

^b School of Dentistry São Leopoldo Mandic   (Brazil)

^c UNIVERSITY OF SÃO PAULO   (Brazil)

^d NONE   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVES; ETCHING; LASER BEAM EFFECTS; STATISTICAL METHODS; TENSILE TESTING; THERMAL CYCLING;

ADHESIVE SYSTEMS; MICROTENSILE BOND STRENGTH ANALYSIS; SELF-ETCHING ADHESIVE SYSTEMS; TOTAL ETCHING (SB);

BOND STRENGTH (MATERIALS);

DENTIN BONDING AGENT;

ANIMAL EXPERIMENT; ARTICLE; CATTLE; DENTAL ETCHING; DENTIN; IN VITRO STUDY; LASER; NONHUMAN; TENSILE STRENGTH; WATER IMMERSION; YAG LASER;

ACID ETCHING, DENTAL; ANIMALS; BISPHENOL A-GLYCIDYL METHACRYLATE; CATTLE; DENTAL BONDING; DENTAL CARIES; DENTAL CAVITY PREPARATION; DENTAL RESTORATION, PERMANENT; DENTIN-BONDING AGENTS; HEAT; LASERS; MATERIALS TESTING; RESIN CEMENTS; TENSILE STRENGTH; THERMODYNAMICS;

EID: 19344377925     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2005.23.219     Document Type: Article

References (49)

1. Buonocore, M.G. (1955). A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J. Dent. Res. 34:849-853.
2. Wilson, N.H.F. (2001). Direct adhesive materials: Current perceptions and evidence future solutions. J. Dent. 29:307-316.
3. Swift, E.J. Jr., Perdigão, J., and Heymann, H.O. (1995). Bonding to enamel and dentin: A brief history and state of the art, 1995. Quintessence Int. 26:95-110.
4. Perdigão, J., and Lopes, M. (1999). Dentin bonding - questions for the new millenium. J. Adhes. Dent. 1:191-209.
5. Brännström, M. (1984). Smear layer: Pathological and treatment considerations. Oper. Dent. 3:35-42.
6. Pashley, D.H. (1984). Smear layer: Physiological considerations. Oper. Dent. 9:13-29.
7. Fusayama, T., Nakamura, M., Kurosaki, N., and Iwaku, N. (1979). Non-pressure adhesion of a new adhesive restorative resin. J. Dent. Res. 58:1364-1370.
8. Nakabayashi, N., Kojima, K., and Masuhara, E. (1982). The promotion of adhesion by the infiltration of monomers into tooth substrates. J. Biomed. Mater. Res. 16:265-273.
9. Sano, H., Tsunekazu, S., and Sonoda, H. et al. (1994). Relationship between surface area for adhesion and tensile bond strength - evaluation of a micro-tensile bond test. Dent. Mater. 10:236-240.
10. Sano, H., Yoshiyama, M., and Ebisu, S. et al. (1995). Comparative SEM and TEM observations of nanoleakage within the hybrid layer. Oper. Dent. 20:160-167.
11. Shono, Y., Terashita, M., and Shimada, J. et al. (1999). Durability of resin-dentin bonds. J. Adhes. Dent. 1:211-218.
12. Tay, F.R., Carvalho, R., Sano, H., and Pashley, D.H. (2000). Effect of smear layers on the bonding of a self-etching primer to dentin. J. Adhes. Dent. 2:99-116.
13. Tay, F.R., Kwong, S.M., and Itthagarun, A. et al. (2000). Bonding of a self-etching primer to non-carious cervical sclerotic dentin: Interfacial ultrastructure and microtensile bond strength evaluation. J. Adhes. Dent. 2:9-28.
14. Hashimoto, M., Ohno, H., Kaga, M., Sano, H., Endo, K., and Oguchi, H. (2002). Fractured surface characterization: wet versus dry bonding. Dent. Mater. 18:95-102.
15. Nakajima, M., Ogata, M., Harada, N., Tagami, J., and Pashley, D.H. (2000). Bond strengths of self-etching primer adhesives to in vitro-demineralized dentin following mineralizing treatment. J. Adhes. Dent. 2:29-38.
16. Ogata, M., Harada, N., Yamaguchi, S., Nakajima, M., Pereira, P.N.R., and Tagami, J. (2001). Effects of different burs on dentin bond strengths of self-etching primer bonding systems. Oper. Dent. 26:375-382.
17. Tay, F.R. and Pashley, D.H. (2001). Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent. Mater. 17:296-308.
18. Tay, F.R., Carvalho, R., and Yiu, C.K.Y., et al. (2000). Mechanical disruption of dentin collagen fibrils during resin-dentin bond testing. J. Adhes. Dent. 2:175-192.
19. Hibst, R., Keller, U., and Steiner, R. (1988). Die wirkung gepulster Er:YAG Laserstrahlung auf zahngewebe. Lasers Med. Surg. 4:163-165.
20. Hibst, R., and Keller, U. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances. I. Measurement of the ablation rate. Lasers Surg. Med. 9:338-344.
21. Kayano, T., Ochiai, S., Kiyono, K., Yamamoto, H., Nakajima, S., and Mochizuki, T. (1991). Effect of Er:YAG laser irradiation on human extracted teeth. J. Clin. Laser Med. Surg. 4:147-150.
22. Li, Z., Code, J.E., and Merwe, W.P. (1992). Er:YAG laser ablation of enamel and dentin of human teeth: Determination of ablation rates at various fluences and pulse repetitions rates. Lasers Surg. Med. 12:625-630.
23. Keller, U., and Hibst, R. (1993). Effects of Er:YAG laser on enamel bonding of composite materials. in: International Society for Optical Engineering. Los Angeles. Proceedings . . . Los Angeles: SPIE, 163-168.
24. Wigdor, H., Abt, E., Ashrafi, S., and Walsh, J.T. Jr. (1993). The effect of lasers on dental hard tissues. J. Am. Dent. Assoc. 124:65-70.
25. Keller, U., and Hibst, R. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances. II. Light microscopic and SEM investigations. Lasers Surg. Med. 9:345-351.
26. Oda, M., Oliveira, D.C., and Liberti, E. (2001). Avaliação morfológica da união entre adesivo/resina composta e dentina irradiada com laser Er:YAG e laser Nd:YAG: estudo comparativo por microscopia de varredura. Pesq. Odontol. Bras. 15:283-289.
27. Eduardo, P.L.P., Ramos, A.C.B., and Eduardo, C.P. (1998). The use of the Er:YAG laser in cavity preparation - clinical cases. in: International Congress on Lasers in Dentistry, Maui. Proceeding of the 6th.
28. Sano, H., Ciucchi, B., Matthews, W.G., and Pashley, D.H. (1994). Tensile properties of mineralized and demineralized human and bovine dentin. J. Dent. Res. 73:1205-1211.
29. Nakamichi, I., Iwaku, M., and Fusayama, T. (1983). Bovine teeth as possible substitutes in the adhesion test. J. Dent. Res. 62:1076-1081.
30. Schilke, R., Bauß, O., Lisson, J.A., Schuckar, M., and Geurtsen, W. (1999). Bovine dentin as a substitute for human dentin in shear bond strength measurements. Am. J. Dent. 12:92-96.
31. Carvalho, R.M., Pereira, J.C., Yoshiyama, M., and Pashley, D.H. (1996). A review of polymerization contraction: The influence of stress development versus stress relief. Oper. Dent. 21:17-24.
32. Yoshikawa, T., Sano, H., Burrow, M.F., Tagami, J., and Pashley, D.H. (1999). Effects of dentin depth and cavity configuration on bond strength. J. Dent. Res. 78:898-905.
33. Carvalho, R.M., Sano, H., Ciucchi, B., Yoshiyama, M., and Pashley, D.H. (1994). Determinação da resistência adesiva à dentina através de um dispositivo de micro-tração. Rev. Fac. Odontol. Bauru. 2:77-82.
34. Kitasako, Y., Nakajima, M., Pereira, P.N. et al. (2000). Monkey pulpal response and microtensile bond strength beneath a one-application resin bonding system in vivo. J. Dent. 28:193-198.
35. Yoshiyama, M., Urayama, A., Kimochi, T., Matsuo, T., and Pashley, D.H. (2000). Comparison of conventional vs self-etching adhesive bonds to caries-affected dentin. Oper. Dent. 25:163-169.
36. Li, H., Burrow, M.F., and Tyas, M.J. (2002). The effect of thermocycling regimens on the nanoleakage of dentin bonding systems. Dent. Mater. 18:189-196.
37. Cardoso, P.E.C., Braga, R.R., and Carrilho, M.R.O. (1998). Evaluation of microtensile, shear and tensile tests determining the bond strength of three adhesive systems. Dent. Mater. 14:394-398.
38. Pashley, D.H., Carvalho, R., and Sano, H. et al. (1999). The microtensile bond test: a review. J. Adhes. Dent. 1:299-309.
39. Gale, M.S., and Darvell, B.W. (1999). Thermal cycling procedures for laboratory testing of dental restorations. J. Dent. 27:89-99.
40. Dörfer, C.E., Staehle, H.J., Wurtz, M.W., Duschner, H., and Pioch, T. (2000). The nanoleakage phenomenon: influence of different dentin bonding agents, thermocycling and etching time. Eur. J. Oral Sci. 108:346-351.
41. Hashimoto, M., Ohno, H., Kaga, M., Endo, K., Sano, H., and Oguchi, H. (2000). In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J. Dent. Res. 79:1385-1397.
42. Takahashi, A., Sato, Y., Uno, S., Pereira, P.N.R., and Sano, H. (2002). Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent. Mater. 18:263-268.
43. Tanumiharja, M., Burrow, M.F., and Tyas, M.J. (2000). Microtensile bond strengths of seven dentin adhesive systems. Dent. Mater. 16:180-187.
44. Bouillaguet, S., Gysi, P., Wataha, J.C. et al. (2001). Bond strength of composite to dentin using conventional, one-step, and self-etching adhesive systems. J. Dent. 29:55-61.
45. Navarro, R.S. (2001). Resistência à tração de resina composta sobre esmalte e dentina condicionados com laser de Er:YAG e um sistema adesivo auto-condicionante: análise das superfícies pela microscopia eletrônica de varredura. (2001). M.S. Thesis, School of Dentistry, University of São Paulo, São Paulo.
46. Sano, H., Yoshikawa, T., Pereira, P.N.P. et al. (1999). Long-term durability of dentin bonds made with a self-etching primer, in vivo. J. Dent. Res. 78:906-911.
47. Kataumi, M., Nakajima, M., Yamada, T., and Tagami, J. (1998). Tensile bond strength and SEM evaluation of Er:YAG laser irradiated dentin using dentin adhesive. Dent. Mater. J. 17:125-138.
48. Hossain, M., Nakamura, Y., Yamada, Y., Kimura, Y., Nakamura, G., and Matsumoto, K. (1999). Ablation depths and morphological changes in human enamel and dentin after Er:YAG laser irradiation with or without water mist. J. Clin. Laser Med. Surg. 17:105-109.
49. Burnett, L.H., Conceicao, E.G., Pelino, J.E., and Eduardo, C.P. (2001). Comparative study of influence on tensile bond strength of a composite to dentin using Er:YAG laser, air abrasion, or air turbine for preparation of cavities. J. Clin. Laser Med. Surg. 19:199-202.