Influence of Er:YAG laser surface treatment and primer application methods on microtensile bond strength self-etching systems

Photomedicine and Laser Surgery

Volumn 23, Issue 3, 2005, Pages 304-312

  Azevedo Manhães, Lussara ^a   Cerqueira Oliveira, Denise ^b   Martins Marques, Márcia ^c   Bona Matos, Adriana ^c  

^a Campos School of Dentistry   (Brazil)

^b DEPARTAMENTO DE CIÊNCIAS BIOLÓGICAS   (Brazil)

^c UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

LASERS; MORPHOLOGY; SCANNING ELECTRON MICROSCOPY; STRENGTH OF MATERIALS; SURFACE TREATMENT;

BOND STRENGTH; LASER SURFACE TREATMENT; PRIMER APPLICATION TECHNIQUE; SELF-ETCHING SYSTEM;

ERBIUM;

ADHESIVE AGENT; CYANOACRYLATE; DIAMOND; WATER;

ARTICLE; CONTROLLED STUDY; DENTAL BONDING; DENTAL LASER ETCHING; DENTIN; ERBIUM YAG LASER; HUMAN; HUMAN TISSUE; IN VITRO STUDY; INSTRUMENT; MOLAR TOOTH; SCANNING ELECTRON MICROSCOPY; STATISTICAL ANALYSIS; SURFACE PROPERTY; TENSILE STRENGTH;

EID: 21444436601     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2005.23.304     Document Type: Article

References (47)

1. Eick, J.D., Wilko, R.A., Anderson, C.H., et al. (1970). Scanning electron microscopy of cut tooth surfaces and identification of debris by use of the electron microprobe. J. Dent. Res. 49, 1359-1368.
2. Pashley, D.H. (1992). Smear layer: overview of structure and function. Proc. Finn. Dent. Soc. 88, 215-224.
3. Inoue, H., Inoue, S., Uno, S., et al. (2001). Microtensile bond strength of two single-step adhesive systems to bur-prepared dentin. J. Adhes. Dent. 3, 129-136.
4. Koibuchi, H., Yasuda, N., and Nakabayashi, N. (2001). Bonding to dentin with a self-etching primer: the effect of smear layers. Dent. Mater. 17, 122-126.
5. Perdigão, J., and Lopes, M. (1999). Dentin bonding-questions for the new millenium. J. Adhes. Dent. 1, 191-209.
6. Nakajima, M., Ogata, M., Harada, N., et al. (2000). Bond strengths of self-etching primer adhesives to in vitro-demineralized dentin following mineralizing treatment. J. Adhes. Dent. 2, 29-38.
7. Ogata, M., Harada, N., Yamaguchi, S., et al. (2001). Effects of different burs on dentin bond strengths of self-etching primer bonding systems. Oper. Dent. 26, 375-382.
8. Tay, F.R., and Pashley, D.H. (2001). Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent. Mater. 17, 296-308.
9. Tay, F.R., Sano, H., Carvalho, R., et al. (2000). An ultrastructural study of the influence of acidity of self-etching primers and smear layer thickness on bonding to intact dentin. J. Adhes. Dent. 2, 83-98.
10. Tay, F.R., Carvalho, R., Sano, H., et al. (2000). Effect of smear layers on the bonding of a self-etching primer to dentin. J. Adhes. Dent. 2, 99-116.
11. Watanabe, I., Nakabayashi, N., and Pashley, D.H. (1994). Bonding to ground dentin by a Phenyl-P self etching primer. J. Dent. Res. 73, 1212-1220.
12. Chigira, H., Yukitani, W., Hasegawa, T., et al. (1994). Self-etching dentin primers containing phenil-P. J. Dent. Res. 73, 1088-1095.
13. Hibst, R., Keller, U., and Steiner, R. (1988). Die Wirkung gepulster Er:YAG laserstrahlung auf zahngewebe. Lasers Med. Surg. 4, 163-165.
14. Hibst, R., and Keller, U. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances. I. Measurement of the ablation rate. Lasers Surg. Med. 9, 338-344.
15. Kayano, T., Ochiai, S., Kiyono, K., et al. (1991). Effect of Er:YAG laser irradiation on human extracted teeth. J. Clin. Laser Med. Surg. 4, 147-150.
16. Li, Z., Code, J.E., and Merwe, W.P. (1992). Er:YAG laser ablation of enamel and dentin of human teeth: determination of ablation rates at various fluences and pulse repetition rates. Lasers Surg. Med. 12, 625-630.
17. Keller, U., and Hibst, R. (1993). Effects of Er:YAG laser on enamel bonding of composite materials, in: International society for optical engineering, Los Angeles. Los Angeles: SPIE, pp. 163-168.
18. Wigdor, H., Abt, E., Ashrafi, S., et al. (1993). The effect of lasers on dental hard tissues. J. Am. Dent. Assoc. 124, 65-70.
19. Oda, M., Oliveira, D.C., and Liberti, E. (2001). Avaliaçã;o morfológica da união entre adesivo/resina composta e dentina irradiada com laser Er:YAG e laser Nd:YAG: estudo comparativo por microscopia de varredura. Pesq. Odontol. Bras. 15, 283-289.
20. Eduardo, P.L.P., Ramos, A.C.B., and Eduardo, C.P. (1998). The use of the Er:YAG laser in cavity preparation - clinical cases, in: International Congress on Lasers in Dentistry, 6, Maui. Maui: ISLD, pp. 202-205.
21. Paghdiwala, A.F., Vaidyanathan, T.K., and Paghdiwala, M.F. (1993). Evaluation of Erbium:YAG laser radiation of hard dental tissues: analysis of temperature changes, depth of cuts and structural effects. Scan. Microsc. 7, 989-997.
22. Tanji, E.Y. (1998). Alteraco̧ẽs morfológicas do esmalte e dentina de cavidades Classe I preparadas com o laser de Er:YAG - estudo in vitro [Masters Thesis]. University of São Paulo.
23. Kataumi, M., Nakajima, M., Yamada, T., et al. (1998). Tensile bond strength and SEM evaluation of Er:YAG laser irradiated dentin using dentin adhesive. Dent. Mater. J. 17, 125-138.
24. Saraceni, C.H.C. (1998). Resistência à tração de um sistema adesivo em superfícies dentinárias tratadas com microabrasão por óxido de alumínio e irradiação com laser de Er: YAG. [Masters thesis]. University of São Paulo.
25. Navarro, R.S. (2001). Resistência à tração de resina composta sobre esmalte e dentina condicionados com laser de Er:YAG e um sistema adesivo auto-condicionante: análise das superfícies pela microscopia eletrônica de varredura. [Masters thesis]. University of São Paulo.
26. Kameyama, A., Kawada, A., Takizawa, M., et al. (2000). Influence of different acid conditioners on the tensile bond strength of 4-META/MMA-TBB resin to EnYAG laser-irradiated bovine dentin. J. Adhes. Dent. 2, 297-304.
27. Burnett, L.H., Conceição, E.N., Pelino, J.E., et al. (2001). Comparative study of influence on tensile bond strength of a composite to dentin using Er:YAG laser, air abrasion, or air turbine for preparation of cavities. J. Clin. Laser Med. Surg. 19, 199-202.
28. Oliveira, D.C. (2002). Análise da resistência de união entre diferentes sistemas adesivos e dentina preparada com alla rotação e laser Er:YAG [Doctoral dissertation]. University of São Paulo.
29. Miyazaki, M., Platt, J.A., Onose, H., et al. (1996). Inflluence of dentin primer application methods on dentin bond strength. Oper. Dent. 21, 167-172.
30. Tao, L., and Pashley, D.H. (1989). The relationship between dentin bond strengths and dentin permeability. Dent. Mater. 5, 133-139.
31. Sano, H., Ciucchi, B., Matthews, W.G., et al. (1994). Tensile properties of mineralized and demineralized human and bovine dentin. J. Dent. Res. 73, 1205-1211.
32. Zheng, L., Pereira, P.N.R., Nakajima, M., et al. (2001). Relationship between adhesive thickness and microtensile bond strength. Oper. Dent. 26, 97-104.
33. Hashimoto, M., Ohno, H., Kaga, M., et al. (2002). Fractured surface characterization: wet versus dry bonding. Dent. Mater. 18, 95-102.
34. Cardoso, P.E.C., Braga, R.R., and Carrilho, M.R.O. (1998). Evaluation of microtensile, shear and tensile tests determining the bond strength of three adhesive systems. Dent. Mater. 14, 394-398.
35. Shono, Y., Terashita, M., Shimada, J., et al. (1999). Durability of resin-dentin bonds. J. Adhes. Dent. 1, 211-218.
36. Pashley, D. H., Carvalho, R., Sano, H., et al. (1999). The microtensile bond test: a review. J. Adhes. Dent. 1, 299-309.
37. Tay, F.R., Carvalho, R., Yiu, C.K.Y., et al. (2000). Mechanical disruption of dentin collagen fibrils during resin-dentin bond testing. J. Adhes. Dent. 2, 175-192.
38. Sano, H., Tsunekazu, S., Sonoda, H., et al. (1994b). Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent. Mater. 10, 236-240.
39. Sambrock, J., Fritsch, E.F., and Maniatis, T. (1989). Detection and analysis of protein expressed from cloned genes, in: Molecular cloning. A laboratory manual. J. Sambrock, E.F. Fritsch, and T. Maniatis (eds.). New York: Cold Spring Harbor Laboratory Press, pp. 181-188.
40. Tanumiharja, M., Burrow, M.F., Tyas, M.J. et al. (2000). Field-emission scanning electron microscopy of resin-dentin interface morphology of seven dentin adhesive systems. J. Adhes. Dent. 2, 259-269.
41. Pashley, D.H., Michelich, V., and Kehl, T. (1981). Dentin permeability: effects of smear layer removal. J. Prosthet. Dent. 46, 531-537.
42. Armstrong, S. R., Keller, J.C., and Boyer, D.B. (2001). Mode of failure in dentin-adhesive resin-resin composite bonded joint as determined by strength based (mTBS) and fracture-based (CNSB) mechanical testing. Dent. Mater. 17, 201-210.
43. Hashimoto, M., Ohno, H., Kaga, M., et al. (2002). Fractured surface characterization: wet versus dry bonding. Den. Mater. 18, 95-102.
44. Watanabe, L.G., Marshall, Jr., G.W., and Marshall, S.J. (1996). Dentin shear strength: effects of tubule orientation and intratooth location. Dent. Mater. 12, 109-115.
45. Lloyd, C.H., and Scrimgeour, S.N. (1997). Dental materials: 1995 literature review. J. Dent. 25, 173-208.
46. Sudsangiam, S., and Van Noort, R. (1999). Do dentin bond strength tests serve a useful purpose? J. Adhes. Dent. 1, 57-67.
47. Bianchi, J. (1999). Estudo sobre a resistência à micro-tração em função das dimensões, modo de preensão e formato do corpode-prova. [Doctoral dissertation]. University of São Paulo.