Bond strength of self-etching primer to bur cut, Er,Cr:YSGG, and Er:YAG lased dental surfaces

Photomedicine and Laser Surgery

Volumn 25, Issue 5, 2007, Pages 373-380

  Esteves Oliveira, Marcella ^a,d   Zezell, Denise M ^b   Apel, Christian ^a   Turbino, Miriam L ^c   Aranha, Ana Cecília Corrêa ^c   Eduardo, Carlos De Paula ^c   Gutknecht, Norbert ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

^b INSTITUTO DE PESQUISAS ENERGÉTICAS E NUCLEARES   (Brazil)

^c UNIVERSITY OF SÃO PAULO   (Brazil)

^d UNIVERSITY HOSPITAL RWTH AACHEN   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); BOND STRENGTH (CHEMICAL); ETCHING; LASER BEAM EFFECTS; SEMICONDUCTOR LASERS; TOOTH ENAMEL;

COMPOSITE RESIN; DENTAL SURFACES; TENSILE BOND STRENGTH; TUKEY TEST;

DENTAL MATERIALS;

CHROMIUM; ERBIUM; RESIN; TISSUE ADHESIVE;

ADHESION; ARTICLE; BOND STRENGTH; COMPOSITE MATERIAL; CONTROLLED STUDY; DENTAL LASER ETCHING; DENTAL SURGERY; DENTIN; ENAMEL; ERBIUM YAG LASER; HUMAN; HUMAN TISSUE; LASER SURGERY; SELF ETCHING PRIMER SYSTEM; STATISTICAL ANALYSIS; TENSILE STRENGTH;

ADHESIVENESS; DENTAL BONDING; DENTAL ENAMEL; DENTAL ETCHING; DENTIN-BONDING AGENTS; HUMANS; LASER THERAPY, LOW-LEVEL; LASERS, SOLID-STATE; TENSILE STRENGTH;

EID: 35848962507     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2007.2044     Document Type: Article

References (40)

1. Moritz, A., Gutknecht, N., Schoop, U., Goharkhay, K., Wernisch, J., and Sperr, W. (1996). Alternatives in enamel conditioning: a comparison of conventional and innovative methods. J Clin Laser Med Surg. 14, 133-136.
2. Visuri, S.R., Gilbert, J.L., Wright, D.D., Wigdor, H.A., and Walsh, J.T., Jr. (1996). Shear strength of composite bonded to Er:YAG laser-prepared dentin. J Dent Res. 75, 599-605.
3. Moritz, A., Schoop, U., Goharkhay, K., et al. (1998). Procedures for enamel and dentin conditioning: a comparison of conventional and innovative methods. J Esthet Dent. 10, 84-93.
4. Apel, C., and Gutknecht, N. (1999). Bond strength of composites on Er:YAG and Er,Cr:YSGG laser-irradiated enamel, in: SPIE Proceedings Vol. 3564, Medical Application of Lasers in Dermatology, Cardiology, Ophthalmology and Dentistry II. G.B. Altshuler, S. Andersson-Engels, R. Birngruber, et al. (eds). pp. 197-200.
5. Usumez, A., and Aykent, F. (2003). Bond strengths of porcelain laminate veneers to tooth surfaces prepared with acid and Er,Cr:YSGG laser etching. J Prosthet Dent. 90, 24-30.
6. Usumez, S., Orhan, M., and Usumez, A. (2002). Laser etching of enamel for direct bonding with an Er,Cr:YSGG hydrokinetic laser system. Am J Orthod Dentofacial Orthop. 122, 649-656.
7. Goncalves, M., Corona, S.A., Pecora, J.D., and Dibb, R.G. (2003). Influence of the frequency of Er:YAG laser on the bond strength of dental enamel. J Clin Laser Med Surg. 21, 105-108.
8. Hibst, R., and Keller, U. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances: I. Measurement of the ablation rate. Lasers Surg Med. 9, 338-344.
9. Keller, U., and Hibst, R. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances: II. Light microscopic and SEM investigations. Lasers Surg Med. 9, 345-351.
10. Wigdor, H.A., Walsh, J.T., Jr., Featherstone, J.D., Visuri, S.R., Fried, D., and Waldvogel, J.L. (1995). Lasers in dentistry. Lasers Surg Med. 16, 103-133.
11. De Munck, J., Van Meerbeek, B., Yudhira, R., Lambrechts, P., and Vanherle, G. (2002). Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin. Eur J Oral Sci. 110, 322-329.
12. Tay, F.R., and Pashley, D.H. (2003). Have dentin adhesives become too hydrophilic? J Can Dent Assoc. 69, 726-731.
13. Van Landuyt, K.L., Kanumilli, P., De Munck, J., Peumans, M., Lambrechts, P., and Van Meerbeek, B. (2006). Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent. 34, 77-85.
14. Carvalho, R.M., Chersoni, S., Frankenberger, R., Pashley, D.H., Prati, C., and Tay, F.R. (2005). A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials. 26, 1035-1042.
15. Tay, F.R., Carvalho, R., Sano, H., and Pashley, D.H. (2000). Effect of smear layers on the bonding of a self-etching primer to dentin. J Adhes Dent. 2, 99-116.
16. Tay, F.R., Kwong, S.M., Itthagarun, A., et al. (2000). Bonding of a self-etching primer to non-carious cervical sclerotic dentin: interfacial ultrastructure and microtensile bond strength evaluation. J Adhes Dent. 2, 9-28.
17. Pashley, D.H., and Tay, F.R. (2001). Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel. Dent Mater. 17, 430-444.
18. Camps, J., and Pashley, D.H. (2000). Buffering action of human dentin in vitro. J Adhes Dent. 2, 39-50.
19. Ogata, M., Harada, N., Yamaguchi, S., Nakajima, M., Pereira, P.N., and Tagami, J. (2001). Effects of different burs on dentin bond strengths of self-etching primer bonding systems. Oper Dent. 26, 375-382.
20. Oliveira, S.S., Pugach, M.K., Hilton, J.F., Watanabe, L.G., Marshall, S.J., and Marshall, G.W., Jr. (2003). The influence of the dentin smear layer on adhesion: a self-etching primer vs. a totaletch system. Dent Mater. 19, 758-767.
21. Chan, K.M., Tay, F.R., King, N.M., Imazato, S., and Pashley, D.H. (2003). Bonding of mild self-etching primers/adhesives to dentin with thick smear layers. Am J Dent. 16, 340-346.
22. Van Meerbeek, B., De Munck, J., Mattar, D., Van Landuyt, K., and Lambrechts, P. (2003). Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent. 28, 647-660.
23. Dela Rosa, A., Sarma, A.V., Le, C.Q., Jones, R.S., and Fried, D. (2004). Peripheral thermal and mechanical damage to dentin with microsecond and sub-microsecond 9.6 microm, 2.79 microm, and 0.355 microm laser pulses. Lasers Surg Med. 35, 214-228.
24. Bachmann, L., Diebolder, R., Hibst, R., and Zezell, D.M. (2005). Changes in chemical composition and collagen structure of dentine tissue after erbium laser irradiation. Spectrochim Acta A Mol Biomol Spectrosc. 61, 2634-2639.
25. de Souza, F.B., Silva, C.H.V., Dibb, R.G.P., Delfino, C.S., and Beatrice, L.C.D. (2005). Bonding performance of different adhesive systems to deproteinized dentin: Microtensile bond strength and scanning electron microscopy. J Biomed Mater Res B Appl Biomater. 75B, 158-167.
26. Bachmann, L., Diebolder, R., Hibst, R., and Zezell, D.M. (2003). Infrared absorption bands of enamel and dentin tissues from human and bovine teeth. Appl Spectrosc Rev. 38, 1-14.
27. Ying, D., Chuah, G.K., and Hsu, C.Y. (2004). Effect of Er:YAG laser and organic matrix on porosity changes in human enamel. J Dent. 32, 41-46.
28. Apel, C., Meister, J., Gotz, H., Duschner, H., and Gutknecht, N. (2005). Structural changes in human dental enamel after subablative erbium laser irradiation and its potential use for caries prevention. Caries Res. 39, 65-70.
29. Cecchini, R.C., Zezell, D.M., de Oliveira, E., de Freitas, P.M., and Eduardo Cde, P. (2005). Effect of Er:YAG laser on enamel acid resistance: morphological and atomic spectrometry analysis. Lasers Surg Med. 37, 366-372.
30. Seka, W., Featherstone, J.D.B., Fried, D., Visuri, S.R., and Walsh, J.T. (1996). Laser ablation of dental hard tissues from explosive ablation to plasma mediate ablation., in: Proc SPIE 2672, Lasers in dentistry II. H.A. Wigdor, J.D.B. Featherstone, J.M. White, and J. Neev (eds). pp. 144-158.
31. Lizarelli Rde, F., Moriyama, L.T., and Bagnato, V.S. (2003). Ablation of composite resins using Er:YAG laser - comparison with enamel and dentin. Lasers Surg Med. 33, 132-139.
32. Sheth, K.K., Staninec, M., Sarma, A.V., and Fried, D. (2004). Selective targeting of protein, water, and mineral in dentin using UV and IR pulse lasers: the effect on the bond strength to composite restorative materials. Lasers Surg Med. 35, 245-253.
33. Sudsangiam, S., and van Noort, R. (1999). Do dentin bond strength tests serve a useful purpose? J Adhes Dent. 1, 57-67.
34. Donmez, N., Belli, S., Pashley, D.H., and Tay, F.R. (2005). Ultrastructural correlates of in vivo/in vitro bond degradation in selfetch adhesives. J Dent Res. 84, 355-359.
35. Ferrari, M., Goracci, C., Sadek, F., Eduardo, P., and Cardoso, C. (2002). Microtensile bond strength tests: scanning electron microscopy evaluation of sample integrity before testing. Eur J Oral Sci. 110, 385-391.
36. Goracci, C., Sadek, F.T., Monticelli, F., Cardoso, P.E., and Ferrari, M. (2004). Influence of substrate, shape, and thickness on microtensile specimens' structural integrity and their measured bond strengths. Dent Mater. 20, 643-654.
37. Tay, F.R., and Pashley, D.H. (2001). Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater. 17, 296-308.
38. Toledano, M., Osorio, R., de Leonardi, G., Rosales-Leal, J.I., Ceballos, L., and Cabrerizo-Vilchez, M.A. (2001). Influence of self-etching primer on the resin adhesion to enamel and dentin. Am J Dent. 14, 205-210.
39. Schoop, U., Kluger, W., Moritz, A., Nedjelik, N., Georgopoulos, A., and Sperr, W. (2004). Bactericidal effect of different laser systems in the deep layers of dentin. Lasers Surg Med. 35, 111-116.
40. Kwong, S.M., Cheung, G.S., Kei, L.H., et al. (2002). Micro-tensile bond strengths to sclerotic dentin using a self-etching and a total-etching technique. Dent Mater. 18, 359-369.