Thermal modelling of laser welding and related processes: A literature review

Optics and Laser Technology

Volumn 37, Issue 2, 2005, Pages 99-115

  Mackwood, A P ^a   Crafer, R C ^b  

^a UNIVERSITY OF ESSEX   (United Kingdom)

^b Abington Consultants   (United Kingdom)

Author keywords

Laser welding; Literature review; Modelling; Simulation; Surface treatment; Welding

Indexed keywords

CARBON DIOXIDE; COMPUTER SIMULATION; FRICTION; METALS; RESIDUAL STRESSES; SURFACE TENSION; SURFACE TREATMENT;

LITERATURE REVIEWS; THERMAL MODELING;

LASER BEAM WELDING;

EID: 5444264476     PISSN: 00303992     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.optlastec.2004.02.017     Document Type: Article

References (228)

1. Schuöcker D, editor. Handbook of the Eurolaser Academy. London: Chapman & Hall; 1998.
2. Carslaw H.C., Jaeger J.C. Conduction of heat in solids. 1997;Oxford Science Publications, Oxford.
3. Rosenthal D. The theory of moving sources of heat and its application to metal treatments. Trans Amer Soc Mech Eng. 68:1946;849-866.
4. Swift-Hook D.T., Gick A.E.F. Penetration welding with lasers. Weld Res Suppl. 492s-8s:1973.
5. Bunting K.A., Cornfield G. Toward a general theory of cutting. a relationship between the incident power density and the cut speed Trans ASME J Heat Transfer. 116-22:1975.
6. O'Neill W., Steen W. Review of mathematical models of laser cutting of steel. Lasers Eng. 3:1994;281-299.
7. Lax M. Temperature rise induced by a laser beam. J Appl Phys. 48:1977;3919-3924.
8. Nissim Y.I., Lietoila A., Gold R.B., Gibbons J.F. Temperature distributions produced in semiconductors by a scanning elliptical or circular CW laser beam. J Appl Phys. 51:1980;274-279.
9. Moody J.E., Hendel R.H. Temperature profiles induced by a scanning cw laser-beam. J Appl Phys. 53:1982;4364-4371.
10. Miyazaki T., Giedt W.H. Heat-transfer from an elliptical cylinder moving through an infinite-plate applied to electron-beam welding. Int J Heat Mass Transfer. 25:1982;807-814.
11. Davis M., Kapadia P., Dowden J., Steen W.M., Courtney C.H.G. Heat hardening of metal-surfaces with a scanning laser-beam. J Phys D. 19:1986;1981-1997.
12. Shercliff HR, Ashby MF. Master plots for predicting the case-depth in laser surface treatments. Cambridge University engineering publication CUed/C-Mat./TR134, 1986.
13. Ashby M.F., Easterling K.E. Transformation hardening of steel surfaces by laser-beams.1. Hypo-eutectoid steels. Acta Metall. 32:1984;1935-1948.
14. Steen W.M., Dowden J., Davis M., Kapadia P. A point and line source model of laser keyhole welding. J Phys D. 21:1988;1255-1260.
15. Akhter R., Davis M., Dowden J., Kapadia P., Ley M., Steen W.M. A method for calculating the fused zone profile of laser keyhole welds. J Phys D. 21:1989;23-28.
16. 2 laser Int J Join Mater. 8:1996;30-36.
17. Lankalapalli K.N., Tu J.F., Leong K.H., Gartner M. Laser weld penetration estimation using temperature measurements. J Manuf Sci Eng-Trans ASME. 121:1999;179-188.
18. Postaciouglu N., Kapadia P., Dowden J. A mathematical-model of heat-conduction in a prolate spheroidal coordinate system with applications to the theory of welding. J Phys D. 26:1993;563-573.
19. Kaplan A. Heat transfer during laser material processing. In: Kaplan A, Schuöcker D, editors. Proceeding of the 12th Meeting on Mathematical Modelling of Materials Processing with Lasers (M4PL12), Section 2, Paper 5. 1997.
20. Dowden J.M., Ducharme R., Kapadia P.D. Time dependent line and point sources. a simple model for time-dependent welding processes Lasers Eng. 7:1998;215-228.
21. Stefan J. Ann Phys Chem. 42:1891;269-286.
22. Tao L.N. The exact-solutions of some Stefan-problems with prescribed heat-flux. J Appl Mech. 48:1981;732-736.
23. Frederick D., Greif J. A method for the solution of heat transfer problems with a change of phase. J Heat Transfer. 107:1985;520-526.
24. Kasuya T., Shimoda N. Stefan problem for a finite liquid phase and its application to laser or electron beam welding. J Appl Phys. 82:1997;3672-3678.
25. Mackenzie J.A., Robertson M.L. The numerical solution of one-dimensional phase change problems using an adaptive moving mesh method. J Comput Phys. 161:2000;537-557.
26. Scheerlinck N., Verboven P., Fikiin K.A., De Baerdemaeker J., Nicolai B.M. Finite element computation of unsteady phase change heat transfer during freezing or thawing of food using a combined enthalpy and Kirchhoff transform method. Trans ASAE. 44:2001;429-438.
27. Nedja B. An enthalpy-based finite element method for nonlinear heat problems involving phase change. Comput Struct. 80:2002;9-21.
28. Patankar SV. Numerical heat transfer and fluid flow, 1st ed. New York; Hemisphere: 1980. ISBN 0-89116-522-3.
29. Forsythe G.E., Wasow W.R. Finite-difference methods for partial differential equations. 1960;Wiley, New York.
30. Mazumder J., Steen W.M. Heat transfer model for CW laser material processing. J Appl Phys. 51:1980;941-947.
31. Chande T, Mazumder J. Heat flow during CW laser materials processing. In: Mukherjee K, Mazumder J, editors. Proceedings of Lasers in Metallurgy, TMS-AIME, 1981. p. 165-77.
32. Lim J.W., Chan C.L. Modelling deep penetration laser welding using a. {BEM} sensitivity scheme Eng Anal Boundary Elements. 16:1995;93-98.
33. 2 lasers J Phys D. 28:1995;2252-2261.
34. Norman A.F., Ducharme R., Mackwood A., Kapadia P., Prangnel P.B. Application of thermal modelling to laser beam welding of aluminium alloys. Sci Technol Weld Join. 3:1998;260-266.
35. Mohanty P.S., Mazumder J. Workbench for keyhole laser welding. Sci Technol Weld Join. 2:1997;133-138.
36. Semak V.V., Damkroger B., Kempka S. Temporal evolution of the temperature field in the beam interaction zone during laser material processing. J Phys D. 32:1999;1819-1825.
37. Semak V.V., Steele R.J., Fuerschbach P.W., Damkroger B.K. Role of beam absorption in plasma during laser welding. J Phys D. 33:2000;1179-1185.
38. Cary HB. Modern welding technology. Englewood Cliffs, NJ: Prentice Hall; 1989. p. 555-9.
39. Chung F.K., Wei P.S. Mass, momentum, and energy transport in a molten pool when welding dissimilar metals. J Heat Transfer - Trans ASME. 121:1999;451-461.
40. Phanikuma G., Chattopadhyay K., Dutta P. Modelling of transport phenomena in laser welding of dissimilar metals. Int J Numer Methods Heat Fluid Flow. H11:2001;156-171.
41. Voller V.R., Prakash C. A fixed grid numerical modelling methodology for convection diffusion mushy region phase-change problems. Int J Heat Mass Transfer. 30:1987;1709-1719.
42. Bren A.D., Voller V.R., Reid K.J. Enthalpy-porosity technique for modelling convection-diffusion phase-change - application to the melting of a pure metal. Numer Heat Transfer. 13:1988;297-318.
43. Reed R.C., Bhadeshia H.K.D.H. A simple-model for multipass steel welds. Acta Metall Mater. 42:1994;3663-3678.
44. Lindgren L.E., Runnemalm H., Nasstrom M.O. Simulation of multipass welding of a thick plate. Int J Numer Method Eng. 44:1999;1301-1316.
45. Frewin M.R., Scott D.A. Finite element model of pulsed laser welding. Weld J. 78:1999;15s-22s.
46. Houldcroft P.T. Dilution and uniformity in aluminium alloy weld beads. Br Weld J. 1:1954;468-472.
47. Yokoya S., Matsunawa A. Surface tension driven flow in semi-cylindrical basin. Trans Jpn Weld Soc. 16:1983;51-58.
48. Matsunawa A. What must be resolved to construct a better mathematical model of fusion welding? Zacharia T. Proceedings of the International Conference on Modelling and Control of Joining Process. 1993;1-8 American Welding Orlando, Florida.
49. Chande T., Mazumder J. Mass-transport in laser surface alloying - iron-nickel system. Appl Phys Lett. 41:1982;42-43.
50. Heiple C.R., Roper J.R. Mechanism for minor element effect on GTA fusion zone geometry. Weld J. 61:1982;97s-102s.
51. Matsunawa A. Possible motive forces of liquid motion in laser weld pool. IIW Doc.IV-7720-2000, 2000.
52. Chan C., Mazumder J., Chen M.M. A 2-dimensional transient model for convection in laser melted pool. Metall Trans A-Phys Metall Mater. 15:1984;2175-2184.
53. Chande T., Mazumder J. Estimating effects of processing conditions and variable properties upon pool shape, cooling rates, and absorption-coefficient in laser-welding. J Appl Phys. 56:1984;1981-1986.
54. Dowden J., Davis M., Kapadia P. Some aspects of the fluid-dynamics of laser-welding. J Fluid Mech. 126:1983;123-146.
55. Davis M., Kapadia P., Dowden J. Solution of a Stefan problem in the theory of laser-welding by the method of lines. J Comput Phys. 60:1985;534-538.
56. Meyer G.H. The method of lines and invariant embedding for elliptic and parabolic free boundary problems. SIAM J Numer Anal. 18:1981;150-164.
57. Prakash C., Samonds M., Singha A.K. A fixed grid numerical methodology for phase-change problems involving a moving heat source. Int J Heat Mass Transfer. 30:1987;2690-2694.
58. Chan C.L., Mazumder J., Chen M.M. 3-dimensional axisymmetrical model for convection in laser-melted pools. Mater Sci Technol. 3:1987;306-311.
59. Chan C.L., Mazumder J., Chen M.M. Effect of surface-tension gradient driven convection in a laser melt pool - 3-dimensional perturbation model. J Appl Phys. 64:1998;6166-6174.
60. Matsunawa A., Ohji T. Role of surface tension in fusion welding - part 1. Trans JWRI. 11(2):1982;145-154.
61. Matsunawa A., Ohji T. Role of surface tension in fusion welding - part 2. Trans JWRI. 12(1):1983;124-130.
62. Matsunawa A., Ohji T. Role of surface tension in fusion welding - part 3. Trans JWRI. 13(1):1984;147-156.
63. Beck M, Berger P, Dausinger F, Hügel H. Aspects of keyhole/melt interaction in high speed laser welding. In: Orza JM, Domingo C, editors. Proceedings of the Eighth International Symposium on Gas Flow and Chemical Lasers (GCL), vol. 1379. Bellingham, Wa: SPIE; 1991. p. s769-s74.
64. Gratzke U., Kapadia P.D., Dowden J., Kroos J., Simon G. Theoretical approach to the humping phenomenon in welding processes. J Phys D. 25:1992;1640-1647.
65. Lambrakos S.G., Metzbower E.A., Moore P.G., Dunn J.H., Monis A. A numerical-model for deep penetration welding processes. J Mater Eng Perform. 2:1993;819-838.
66. Kar A., Mazumder J. Mathematical-modelling of key-hole laser-welding. J Appl Phys. 78:1995;6353-6360.
67. Kroos J., Gratzke U., Vicanek M., Simon G. Dynamic behaviour of the keyhole in laser-welding. J Phys D. 26:1993;481-486.
68. Mazumder J., Mohanty P.S., Kar A. Mathematical modelling of laser materials processing. Int J Mater Product Technol. 11:1996;193-252.
69. Andrews J.G., Atthey D.R. On the motion of an intensely heated evaporating boundary. J Inst Maths Appl. 15:1975;59-72.
70. Klemens P.G. Heat balance and flow conditions for electron beam and laser welding. J Appl Phys. 47:1976;2165-2174.
71. Andrews J.G., Atthey D.R. Hydrodynamic limit to penetration of a material by a high-power beam. J Phys D. 9:1976;2181-2194.
72. Dowden J., Postaciouglu N., Davis M., Kapadia P. A keyhole model in penetration welding with a laser. J Phys D. 20:1987;36-44.
73. Postaciouglu N., Kapadia P., Davis M., Dowden J.M. Upwelling in the liquid region surrounding the keyhole in penetration welding with a laser. J Phys D. 20:1987;340-345.
74. Schuöcker D. Modelling of the laser welding process. In: Proceedings of ECLAT'90; vol 1. Erlangen: Sprechsaal Publishing Group; 1990. p. 55-64.
75. Dowden J., Wu S.C., Kapadia P., Strange C. Dynamics of the vapour flow in the keyhole in penetration welding with a laser at medium welding speeds. J Phys D. 24:1991;519-532.
76. Kar A., Rockstroh T., Mazumder J. 2-dimensional model for laser-induced materials damage - effects of assist gas and multiple reflections inside the cavity. J Appl Phys. 71:1992;2560-2569.
77. Ducharme R, Kapadia P, Dowden J. A mathematical model of the defocussing of laser light above a workpiece in laser material processing. In: Farson D, Steen W, Miyamoto I, editors. Proceedings of ICALEO'92, vol. 75. LIA, Orlando: Laser Institution of America; 1993. p. 187-97.
78. Metzbower E.A. Keyhole formation. Metall Trans B - Process Metall. 24:1993;875-880.
79. Tix C., Simon G. A transport theoretical-model of the keyhole plasma in penetration laser-welding. J Phys D. 26:1993;2066-2074.
80. Ducharme R, Kapadia P, Dowden J, Williams K, Steen WM. An integrated mathematical model of the keyhole and weldpool in the laser welding of thin metal sheets. In: Farson D, Steen W, Miyamoto I, editors. Proceedings of ICALEO'92, vol. 75. LIA, Orlando: Laser Institution of America; 1993. p. 176-86.
81. 2 laser. In: Denny P, Miyamoto I, Mordike BL, editors. Proceedings of ICALEO'93, vol. 77. LIA, Orlando: Laser Institution of America; 1994. p. 97-105.
82. 2 laser and a variety of shielding gases investigated by means of an integrated mathematical model. In: Denny P, Miyamoto I, Mordike BL, editors. Proceedings of ICALEO'93, vol. 77. LIA, Orlando: Laser Institution of America; 1994. p. 233-41.
83. Cobine J.D. Gaseous conductors. 1949;McGraw-Hill, New York.
84. Clucas DAV, Steen WM, Ducharme R, Kapadia PD, Dowden JM. A mathematical model of the flow within the keyhole during laser welding. In: Mazumder J, Matsunawa A, Magnusson C, editors. Proceedings of ICALEO'95, vol. 80. LIA, Orlando: Laser Institution of America; 1996. p. 989-98.
85. Klein T., Vicanek M., Kroos J., Decker I., Simon G. Oscillations of the keyhole in penetration laser-beam welding. J Phys D. 27:1994;2023-2030.
86. Solana P., Negro G. A study of the effect of multiple reflections on the shape of the keyhole in the laser processing of materials. J Phys D. 30:1997;3216-3222.
87. Solana P., Ocana J.L. A mathematical model for penetration laser welding as a free-boundary problem. J Phys D. 30:1997;1300-1313.
88. Matsunawa A., Semak V. The simulation of front keyhole wall dynamics during laser welding. J Phys D. 30:1997;798-809.
89. Kapadia P., Solana P., Dowden J. Stochastic model of the deep penetration laser welding of metals. J Laser Appl. 10:1998;170-173.
90. Fabbro R., Chouf K. Keyhole modelling during laser welding. J Appl Phys. 87:2000;4075-4083.
91. Fabbro R., Chouf K. Dynamical description of the keyhole in deep penetration laser welding. J Laser Appl. 12:2000;142-148.
92. Pasto M., Sagaro R., Cabrera R. Modelling of the welded profile and the keyhole of a laser welded Al 5182 alloy. Rev Metal. 37:2001;643-652.
93. Kapadia P.D., Dowden J.M. Review of mathematical models of deep penetration laser welding. Lasers Eng. 3:1994;187-280.
94. Dowden JM, Kapadia P. Point and line sources: models of power absorption in the theory of welding. In: Beyer E, Xiangli Chen, Miyamoto I, editor. Proceedings of ICALEO'98, vol. 85. LIA, Orlando: Laser Institution of America; 1999. p. G161-70.
95. Lindgren L.E. Finite element modelling and simulation of welding. Part 1: increased complexity. J Therm Stress. 24:2001;141-192.
96. Lindgren L.E. Finite element modelling and simulation of welding. Part 2: improved material modelling. J Therm Stress. 24:2001;195-213.
97. Lindgren L.E. Finite element modelling and simulation of welding. Part 3: efficiency and integration. J Therm Stress. 24:2001;305-334.
98. Dowden JM. The mathematics of thermal modelling. London, Boca Raton, FL: Chapman & Hall/CRC; 2001. ISBN 1-58488-230-1.
99. Goldak J., Chakravarti A., Bibby M. A new finite-element model for welding heat-sources. Metall Trans B - Process Metall. 15:1984;299-305.
100. Kumar S, Bhaduri SC. 3-dimensional finite-element modelling of gas metal-arc welding. Metall Mater Trans B - Process Metall Mater Process Sci 1994;25:435-41.
101. Kumar S., Bhaduri S.C. Theoretical investigation of penetration characteristics in gas metal-arc welding using finite-element method. Metall Mater Trans B - Process Metall Mater Process Sci. 26:1995;611-624.
102. Haidar J., Lowke J.J. Predictions of metal droplet formation in arc welding. J Phys D. 29:1996;2951-2960.
103. Wahab M.A., Painter M.J. Numerical models of gas metal arc welds using experimentally determined weld pool shapes as the representation of the welding heat source. Int J Pressure Vessels Piping. 73:1997;153-159.
104. Jones L.A., Eagar T.W., Lang J.H. A dynamic model of drops detaching from a gas metal arc welding electrode. J Phys D. 31:1998;107-123.
105. Wahab M.A., Painter M.J., Davies M.H. The prediction of the temperature distribution and weld pool geometry in the gas metal arc welding process. J Mater Process Technol. 77:1998;233-239.
106. Wu C.S., Sun J.S. Modelling the arc heat flux distribution in GMA welding. Comput Mater Sci. 9:1998;397-402.
107. Wu C.S., Sun J.S. Determining the distribution of the heat content of filler metal droplets transferred into gas-metal arc weld pools. Proc Inst Mech Eng B - J. Eng Manufact. 212:1998;525-531.
108. Park H., Rhee S. Analysis of weld geometry considering the transferring droplets in gas metal arc welding. JSME Int J. 44:2001;85-862.
109. Yang Z., DebRoy T. Modelling macro-and microstructures of gas-metal-arc welded HSLA-100 steel. Metall Mater Trans B - Process Metall Mater Process Sci. 30:1999;483-493.
110. Bachorski A., Painter M.J., Smailes A.J., Wahab M.A. Finite-element prediction of distortion during gas metal arc welding using the shrinkage volume approach. J Mater Process Technol. 93:1999;405-409.
111. Kim J.W., Na S.J. A study on the 3-dimensional analysis of heat and fluid-flow in gas metal arc-welding using boundary-fitted coordinates. J Eng Ind-Trans ASME. 116:1994;78-85.
112. Ushio M, Wu CS. Mathematical modelling of three-dimensional heat and fluid flow in a moving gas metal arc weld pool. Metall Mater Trans B - Process Metall Mater Process Sci 1997;28:509-16.
113. Little G.H., Kamtekar A.G. The effect of thermal properties and weld efficiency on transient temperatures during welding. Comput Struct. 68:1998;157-165.
114. Wan Y., Shi Q., Tsai H.L. Modelling of the effects of surface-active elements on flow patterns and weld penetration. Metall Mater Trans B - Proc Metall Mater Process Sci. 32:2001;145-161.
115. Ohring S., Lugt H.J. Numerical simulation of a time-dependent 3-D GMA weld pool due to a moving arc. Weld J. 78:1999;416S-424S.
116. Kim I.S., Basu A. A mathematical model of heat transfer and fluid flow in the gas metal arc welding process. J Mater Process Technol. 77:1998;17-24.
117. Wang Y., Tsai H.L. Effects of surface active elements on weld pool fluid flow and weld penetration in gas metal arc welding. Metall Mater Trans B - Process Metall Mater Proccess Sci. 32:2001;501-515.
118. Wang Y., Tsai H.L. Impingement of filler droplets and weld pool dynamics during gas metal arc welding process. Int J Heat Mass Transfer. 44:2001;2067-2080.
119. Zacharia T., Eraslan A.H., Aidun D.K. Modelling of autogenous welding. Weld J. 67:1988;S53-S62.
120. Eraslan AH, Zacharia T, Aidun DK. Computer code for simulating fast-transient three-phase flow, temperature and material composition conditions during welding. Report No. MIE-142, Department of Mechanical Engineering, Clarkson University, Potsdam, NY, 1986.
121. Zacharia T., Eraslan A.H., Aidun D.K. Modelling of non-autogenous welding. Weld J. 67:1988;S18-S27.
122. Ule R.L., Joshi Y., Sedy E.B. A new technique for 3-dimensional transient heat-transfer computations of autogenous arc-welding. Metall Trans B-Process Metall. 21:1990;1033-1047.
123. Zacharia T., David S.A., Vitek J.M. Effect of evaporation and temperature-dependent material properties on weld pool development. Metall Trans B - Process Metall. 22:1991;233-241.
124. Abouarab T.W., Saleh K.M., Ramadan I. A study of a multidimensional transient heat-conduction process with a moving heat-source-2: numerical and experimental. Mater High Temp. 9:1991;41-48.
125. Lho T.J., Na S.J. A study on 3-dimensional transient heat-flow in circumferential GTA welding of pipes using periodicity conditions. Proc. Inst Mech Eng B - J Eng Manufact. 205:1991;271-278.
126. Fan H.G., Shi Y.W., Na S.J. Numerical analysis of the arc in pulsed current gas tungsten arc welding using a boundary-fitted coordinate. J Mater Process Technol. 72:1997;437-445.
127. Kim W.H., Na S.J. Heat and fluid flow in pulsed current GTA weld pool. Int J Heat Mass Transfer. 41:1998;3213-3227.
128. Wu C.S., Zheng W., Wu L. Modelling the transient behaviour of pulsed current tungsten-inert-gas weldpools. Modell Simul Mater Sci Eng. 7:1999;15-23.
129. Yang Y.P., Dong P., Zhang J., Tian X. A hot-cracking mitigation technique for welding high-strength aluminum alloy. Weld J. 79:2000;9s-17s.
130. Reddy A.A., Guha B., Achar D.R.G. Finite element modelling of three-dimensional transient heat transfer in stainless steel (304) pulsed GTA weldments. Numer Heat Transfer A - Appl. 41:2002;41-46.
131. Tian X.T., Shi Q.Y. Preventing welding hot cracking by welding with an intensive trailing cooler. J Mater Process Technol. 97:2000;30-34.
132. Oreper G.M., Szekely J. Heat-flow and fluid-flow phenomena in weld pools. J Fluid Mech. 147:1984;53-59.
133. Kou S., Wang Y.H. Weld pool convection and its effect. Weld J. 65:1986;63s-70s.
134. Choo R.T.C., Szekely J., Westhoff R.C. On the calculation of the free-surface temperature of gas-tungsten-arc weld pools from 1st principles 1. Modelling the welding arc. Metall Trans B - Process Metall. 23:1992;357-369.
135. Choo R.T.C., Szekely J., David S.A. On the calculation of the free-surface temperature of gas-tungsten-arc weld pools from 1st principles 2. Modelling the weld pool and comparison with experiments. Metall Trans B - Process Metall. 23:1992;371-384.
136. Kim S.D., Na S.J. Effect of weld pool deformation on weld penetration in stationary gas tungsten arc-welding. Weld J. 71:1992;S179-SS93.
137. Wu C.S., Dorn L. Prediction of surface depression of a tungsten inert-gas weld pool in the full-penetration condition. Proc Inst Mech Eng B - J Eng Manufact. 209:1995;221-226.
138. Zacharia T., David S.A., Vitek J.M., Kraus H.G. Surface-temperature distribution of GTA weld pools on thin-plate 304-stainless-steel. Weld J. 74:1995;S353-SS62.
139. Dutta P., Joshi Y., Janaswamy R. Thermal modelling of gas tungsten arc-welding process with nonaxisymmetric boundary-conditions. Numer Heat Transfer A - Appl. 27:1995;499-518.
140. Ducharme R., Kapadia P., Dowden J., Thornton M., Richardson I. A mathematical-model of the arc in electric-arc welding including shielding gas-flow and cathode spot location. J Phys D. 28:1995;1840-1850.
141. Fan H.G., Shi Y.W. Numerical simulation of the arc pressure in gas tungsten arc welding. J Mater Process Technol. 61:1996;302-308.
142. Kim W.H., Fan H.G., Na S.J. A mathematical model of gas tungsten arc welding considering the cathode and the free surface of the weld pool. Metall Mater Trans B-Process Metall Mater Process Sci. 28:1997;679-686.
143. Fan H.G., Na S.J., Shi Y.W. Numerical simulation of current density in gas tungsten arc welding including the influence of the cathode. Proc Inst Mech Eng B - J Eng Manufact. 211:1997;321-327.
144. Cao Z.N., Zhang Y.M., Kovacevic R. Numerical dynamic analysis of moving GTA weld pool. J Manufact Sci Eng - Trans ASME. 120:1998;173-178.
145. Goodarzi M., Choo R., Takasu T., Toguri J.M. The effect of the cathode tip angle on the gas tungsten arc welding arc and weld pool: II. The mathematical model for the weld pool. J Phys D. 31:1998;569-583.
146. Zacharia T., Chen Y., Dress W. Modelling of fundamental phenomena in gas tungsten arc welds. Int J Mater Product Technol. 13:1998;77-88.
147. Apps R.L., Milner D.R. Br Weld J. 12:1995;475.
148. Oreper G.M., Eagar T.W., Szekely J. Convection in arc weld pools. Weld J. 62:1983;307s-312s.
149. Zacharia T., Eraslan A.H., Aidun D.K., David S.A. 3-dimensional transient model for arc-welding process. Metall Trans B - Process Metall. 20:1989;645-659.
150. Ducharme R., Kapadia P., Dowden J., Decker I. A mathematical model of gas flow and heat transfer in the welding arc. Int J Join Mater. 5:1993;131-136.
151. Postaciouglu N., Trayner C., Kapadia P.D., Ducharme R., Dowden J.M., Richardson I. A mathematical model of the electric arc interacting with the anode in electric arc welding. Int J Join Mater. 5:1993;137-142.
152. Ravichandran G., Raghupathy V.P., Ganesan N. Analysis of temperature distribution during circumferential welding of cylindrical and spherical components using the finite element method. Comput Struct. 59:1996;225-255.
153. Bonifaz E.A. Finite element analysis of heat flow in single-pass arc welds. Weld J. 79:2000;121S-125S.
154. Komanduri R., Hou Z.B. Thermal analysis of the arc welding process: part I. General solutions. Metall Mater Trans B - Proc Metall Mater Process Sci. 31:2000;1353-1370.
155. Komanduri R., Hou Z.B. Thermal analysis of the arc welding process: part II. Effect of variation of thermophysical properties with temperature. Metall Mater Trans B - Process Metall Mater Process Sci. 32:2001;483-499.
156. Wen S.W., Hilton P., Farrugia D.C.J. Finite element modelling of a submerged arc welding process. J Mater Process Technol. 119:2001;203-209.
157. Wang K.F., Chandrasekar S., Yang H.T.Y. Finite-element simulation of moving induction heat-treatment. J Mater Eng Perform. 4:1995;460-473.
158. Fuhrmann J., Homberg D., Uhle M. Numerical simulation of induction hardening of steel. COMPEL - The Int J Comput Math Elect Electron Eng. 18:1999.
159. Tsuboi H., Ikeda K., Kurata M., Kainuma K., Nakamura K. Eddy current analysis for the pipe welding. IEEE Trans Magn. 34:1998;1234-1236.
160. 2 laser Metal Technol 6. 12:1979;456-462.
161. Bokota A., Iskierka S. Numerical prediction of the hardened zone in laser treatment of carbon steel. Acta Mater. 44:1996;445-450.
162. Maier C., Schaaf P., Gonser U. Calculation of the temperature profile for laser treatment of metallic samples. Meter Sci Eng A Struct Mater. 150:1992;271-280.
163. Fuhrmann J., Homberg D. Numerical simulation of the surface hardening of steel. Int J Numer Method Heat Fluid Flow. 9:1999;705-724.
164. Singh A.K., Mazumdar D. Mathematical-modelling of thermal fields in some heat-treatment operations. Steel Res. 63:1992;194-200.
165. Gu B.W., Ma T.C., Brown S.K., Mannik L. 3-dimensional numerical-model for laser transformation hardening of metals. Mater Sci Technol. 10:1994;425-430.
166. Rana J., Mishra P.K., Prasad B.V.S.S.S. A transient three-dimensional thermal model for laser heat treatment of finite size workpieces. J Mater Process Manufact Sci. 5:1997;283-293.
167. Fertziger J.H. Numerical methods for engineering applications. 1981;Wiley, New York.
168. Yilbas B.S. Three-dimensional laser heating model and entropy generation consideration. J Energy Resourc Technol - Trans ASME. 121:1999;217-224.
169. Bejan A. Advanced engineering thermodynamics. 1997;Wiley, New York.
170. Crafer R.C., Mackwood A.P. Flexible 2D CW laser surface treatment model. Lasers Eng. 8:1999;241-249.
171. Mazumder J. Laser heat treatment: the state of the art. J Min Metal Mater Soc. 35:1983;18-26.
172. Tosto S. Laser surface treatments: a review of models. Lasers Eng. 3:1994;157-186.
173. Dufrene L., Truc J., Martin R. Modelling of thermal stresses during an electron-beam welding process. J Therm Stresses. 19:1996;211-236.
174. Semak V.V., Bragg W.D., Damkroger B., Kempka S. Transient model for the keyhole during laser welding. J Phys D. 32:1999;L61-LL4.
175. Hemmer H., Grong O., Klokkehaug S. A process model for the heat-affected zone microstructure evolution in duplex stainless steel weldments: part II. Application to electron beam welding. Metall Mater Trans A - Phys Metall Mater Sci. 31:2000;1035-1048.
176. Houldcroft P.T. Which process? 1990;Woodhead Publishing Ltd, Cambridge.
177. Bendzsak G.J., North T.H., Li Z. Numerical model for steady-state flow in friction welding. Acta Mater. 45:1997;1735-1745.
178. Fu L., Duan L. The coupled deformation and heat flow analysis by finite element method during friction welding. Weld J. 77:1998;202S-207S.
179. Chao Y.J., Qi X.H. Thermal and thermo-mechanical modelling of friction stir welding of Aluminum alloy 6061-T6. J Mater Process Manufact Sci. 7:1999;215-233.
180. Frigaard O., Grong O., Midling O.T. A process model for friction stir welding of age hardening aluminum alloys. Metall Mater Trans A - Phys Metall Mater Sci. 32:2001;1189-1200.
181. Browne D.J., Chandler H.W., Evans J.T., Wen J. Computer-simulation of resistance spot-welding in aluminum 1. Weld J. 74:1995;339s-344s.
182. Browne D.J., Chandler H.W., Evans J.T., James P.S., Wen J., Newto C.J. Computer-simulation of resistance spot-welding in aluminum 2. Weld J. 74:1996;417s-422s.
183. Gupta O.P., De A. An improved numerical modelling for resistance spot welding process and its experimental verification. J Manufact Sci Eng - Trans ASME. 120:1998;246-251.
184. Chang B.H., Li M.V., Zhou Y. Comparative study of small scale and large scale resistance spot welding. Sci Technol Weld Join. 6:2001;273-280.
185. Ageorges C., Ye L., Mai Y.W., Hou M. Characteristics of resistance welding of lap shear coupons. Part I: heat transfer. Compos A - Appl Sci Manufact. 29:1998;899-909.
186. Khan J.A., Xu L., Chao Y.J. Prediction of nugget development during resistance spot welding using coupled thermal-electrical-mechanical model. Sci Technol Weld Join. 4:1999;201-207.
187. Xu L., Khan J.A. Nugget growth model for Aluminum alloys during resistance spot welding. Weld J. 78:1999;367s-372s.
188. Khan J.A., Broach K., Kabir A.A.S.A. Numerical thermal model of resistance spot welding in aluminum. J Thermophys Heat Transfer. 14:2000;88-95.
189. Chande, Mazumder J. Two-dimensional, transient model for mass-transport in laser surface alloying. J Appl Phys 1985; 57:2226-32.
190. Carolan R.A., Faulkner R.G. Grain-boundary precipitation of M23C6 in an austenitic steel. Acta Metall. 36:1998;257-266.
191. Faulkner R.G., Jiang H. Combined model of grain-boundary precipitation and segregation of high-strength Aluminum-alloys. Mater Sci Technol. 9:1993;665-671.
192. Faulkner R.G. Nonequilibrium grain-boundary segregation in austenitic alloys. J Mater Sci. 16:1981;373-383.
193. Jiang H., Faulkner R.G. Modelling of grain boundary segregation, precipitation and precipitate-free zones of high strength aluminium alloys 1. The model. Acta Mater. 44:1996;1857-1864.
194. Rappaz M., Gandin C.A. Probabilistic modelling of microstructure formation in solidification processes. Acta Metall Mater. 41:1993;345-360.
195. Koseki T., Matsumiya T., Yamada W., Ogawa T. Numerical modelling of solidification and subsequent transformation of Fe-Cr-Ni alloys. Metall Mater Trans A - Phys Metall Mater Sci. 25:1994;1309-1321.
196. Katayama S., Mizutani M., Matsunawa A. Modelling of melting and solidification behaviour during laser spot welding. Sci Technol Weld Join. 2:1997;1-9.
197. Yang Z., Sista S., Elmer J.W., DebRoy T. Three dimensional Monte Carlo simulation of grain growth during GTA welding of titanium. Acta Mater. 48:2000;4813-4825.
198. Sista S., Yang Z., DebRoy T. Three-dimensional Monte Carlo simulation of grain growth in the heat-affected zone of a 2.25Cr-1Mo steel weld. Metall Mater Trans B - Process Metall Mater Process Sci. 31:2000;529-536.
199. Leblond J.B., Devaux J. A new kinetic-model for anisothermal metallurgical transformations in steels including effect of austenite grain-size. Acta Metall. 32:1984;137-146.
200. Leblond J.B., Devaux J., Devaux J.C. Mathematical-modelling of transformation plasticity in steels 1. Case of ideal-plastic phases. Int J Plast. 5:1989;551-572.
201. Yang Y.S., Na S.J. A study on the thermal and residual-stress by welding and laser surface hardening using a new 2-dimensional finite-element model. Proc Inst Mech Eng B - J Eng Manufact. 204:1990;167-173.
202. Chen Y., Sheng I.C. Residual-stress in weldment. J Therm Stresses. 15:1992;53-69.
203. Sheng I.C., Chen Y. Modelling welding by surface heating. J Eng Mater Technol-Trans ASME. 114:1992;439-449.
204. Brown S., Song H. Finite-element simulation of welding of large structures. J Eng Ind-Trans ASME. 114:1992;441-451.
205. Chidiac S.E., Mirza F.A. Thermal-stress analysis due to welding processes by the finite-element method. Comput Struct. 46:1993;407-412.
206. Postaciouglu N., Kapadia P., Dowden J. Stresses and strains in laser welding of thin metal sheets. Transport Phenomena in Mater Process Manufact ASME. 280:1994;107-112.
207. Prasad N.S., Narayanan T.K.S. Finite element analysis of temperature distribution during arc welding using adaptive grid technique. Weld J. 75:1996;123s-128s.
208. Michaleris P., Sun X. Finite element analysis of thermal tensioning techniques mitigating weld buckling distortion. Weld J. 76:1997;451s-457s.
209. Myhr O.R., Klokkehaug S., Grong O., Fjaer H.G., Kluken A.O. Modelling of microstructure evolution, residual stresses and distortions in 6082-T6 aluminum weldments. Weld J. 77:1998;286s-292s.
210. Brickstad B., Josefson B.L. A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes. Int J Pressure Vessels Piping. 75:1998;11-25.
211. Jahanian S., Mosleh M. The mathematical modelling of phase transformation of steel during quenching. J Mater Eng Perform. 1:1999;75-82.
212. Seok C.S., Suh M.W., Park J.H. Investigation of welding residual stress of high tensile steel by finite element method and experiment. KSME Int J. 13:1999;879-885.
213. Carmignani C., Mares R., Toselli G. Transient finite element analysis of deep penetration laser welding process in a singlepass butt-welded thick steel plate. Comput Method Appl Mech Eng. 179:1999;197-214.
214. Kiselev A.S. Computer-assisted simulation of thermal, structural, and deformational processes in heat-treatment technology. Ind Lab. 65:1999;659-666.
215. Matos C.G., Dodds R.H. Modelling the effects of residual stresses on defects in welds of steel frame connections. Eng Struct. 22:2000;1103-1120.
216. Sarkani S., Tritchkov V., Michaelov G. An efficient approach for computing residual stresses in welded joints. Finite Elements Anal Design. 35:2000;247-268.
217. Prime M.B., Prantil V.C., Rangaswamy P., Garcia F.P. Residual stress measurement and prediction in a hardened steel ring. Mater Sci Forum. 347:2000;223-228.
218. Rohde U., Jeppsson A. Literature review of heat treatment simulations with respect to phase transformation, residual stresses and distortion. Scand J Metall. 29:2000;47-62.
219. Anthony T.R., Cline H.E. Surface rippling induced by surface tension gradients during laser surface melting and alloying. J Appl Phys. 48:1977;3888-3894.
220. Wang K.F., Chandrasekar S., Yang H.T.Y. An efficient 2D finite-element procedure for the quenching analysis with phase-change. J Eng Ind - Trans ASME. 115:1993;124-138.
221. Lind M, Lio N, Alavyoon F, Bark F. Flow effects and modelling in gas-cooled quenching. In: Proceedings of the 11th International Conference on Heat Transfer, Kyongju, Korea, 1998.
222. Thuvander A, Melander A, Lind M, Lior N, Bark F. Prediction of heat transfer coefficients and examination of their effects on distortion of tubes quenched by gas cooling. In: Proceedings of the 4th ASM Heat Treatment and Surface Engineering Conference Florence, Italy, 1998.
223. Garwood D.R., Lucas J.D., Wallis R.A., Ward J. Modelling of the flow distribution in an oil quench tank. J Mater Eng Perform. 1:1992;781-788.
224. Olafsson P., Sandstrom R., Karlsson A. Electrical conductivity of aluminium alloys. Aluminium Alloys: Phys Mech Prop. 217(1-3):1996;981-986.
225. Matthiessen A. Rep Br Assoc. 32:1862;114.
226. Amberg G., Tonhardt R., Winkler C. Finite element simulations using symbolic computing. Math Comput Simul. 49:1999;257-274.
227. Viswanathan R., Gandy D. Weld repair of aged Cr-Mo steel piping - A review of literature. J Pressure Vessel Technol ASME. 122:2000;76-85.
228. Mackerle J. Finite element analysis and simulation of welding: a bibliography (1976-1996). Model Simul Mater Sci Eng. 4:1996;501-533.