Metal forming progress since 2000

CIRP Journal of Manufacturing Science and Technology

Volumn 1, Issue 1, 2008, Pages 2-17

  Jeswiet, J ^a   Geiger, M ^b   Engel, U ^b   Kleiner, M ^c   Schikorra, M ^c   Duflou, J ^d   Neugebauer, R ^e   Bariani, P ^f   Bruschi, S ^f  

^a QUEEN S UNIVERSITY   (Canada)

^b UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^c TU DORTMUND UNIVERSITY   (Germany)

^d UNIVERSITY OF LEUVEN   (Belgium)

^e CHEMNITZ UNIVERSITY OF TECHNOLOGY   (Germany)

^f UNIVERSITY OF PADOVA   (Italy)

Author keywords

Metal forming

Indexed keywords

METAL FORMING;

ANNUAL GENERAL MEETING; TECHNICAL COMMITTEES;

FORMING;

EID: 53549123013     PISSN: 17555817     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cirpj.2008.06.005     Document Type: Review

References (150)

1. Groche, P., Fittshe, D., Tekkaya, E.A., Allwood, J.M., Hirt, G., Neugebauer, R., 2007, Incremental Bulk Forming, Annals of CIRP, 55/2, p. 636.
2. ©, Wadsworth Publishing Company, Belmont, CA.
3. Jeswiet J., and Hauschild M. EcoDesign and Future Environmental Impacts. Journal of Materials & Design 26/7 (2005) 629-634
4. ©, Oxford University Press, New york, NY.
5. ©, Archon Books, Hamden, Connecticut.
6. ©, University of Chicago Press, ISBN 0-226-56157-7.
7. ©, vol. 22, Oxford University Press, London.
8. Geiger M., Kleiner M., Eckstein R., Tiesler N., and Engel U. Microforming. Annals of CIRP 50/2 (2001) 445
9. Engel U., and Eckstein R. Microforming-from Basic Research to its Realization. Metal Forming. Journal of Material Processes Technology 125/126 (2002) 35-44
10. Vollertsen F., Schulze Niehoff H., and Hu Z. State of the Art in Microforming. Interantional Journal of Machine Tools & Manufacture 46 (2006) 11 1172-1179
11. Geißdörfer S., Putz A., and Engel U. Microforming-Current State and Future Demands. Journal of Mechanical Engineering 52 7/8 (2006) 494-505
12. Geißdörfer S., Diehl A., Eichenhüller B., and Engel U. Microforming-Application and 3D Simulation. In: Teti R. (Ed). Proceedings of the 5th CIRP Seminar on Intelligent Computation in Manufacturing Engineering. University of Naples, Naples, Italy (2006) 521-526
13. Engel U., and Geißdörfer S. Microforming-on the Way to Industrial Application?. In: ASME (Ed). Proceedings of the 1st International Conference on Micromanufacturing, ICOMM 2006. Urban, IL, USA, September 13-15 (2006) 21-30
14. Qin Y. Micro-forming and Miniature Manufacturing Systems-Development Needs and Perspectives. Journal of Materials Processes and Technology 177 (2007) 8-18
15. http://www.bias.de/Prozessskalierung/
16. Vollertsen F. Size Effects in Manufacturing. In: Vollertsen F., and Hollmann F. (Eds). Process Scaling. Strahltechnik vol. 24 (2003), BIAS Bremen 145-151
17. http://www.sfb747.uni-bremen.de/
18. 4M Multi-material Micro Manufacture, http://www.4m-net.org/.
19. Mass-manufacture of Miniature/Micro-Products, http://www.masmicro.net/.
20. http://www.eureka.be/
21. http://www.wtec.org/micromfg/
22. Geißdörfer S., Engel U., and Geiger M. FE-simulation of Microforming Processes Applying a Mesoscopic Model. International Journal of Machine Tools and Manufacture 46 11 (2006) 1222-1226
23. Engel, U., Geißdörfer, S., Geiger, M., Simulation of Microforming Processes-An Advanced Approach Applying a Mesoscopic Model (Invited Paper). In: Bariani, P.F. (Ed.), Proceedings of the 8th International Conference on Technology of Plasticity, ICTP 2005, Verona, Italy, October 9-13, 2005, Edizioni Libreria Progetto 2005, Padova, Italy, pp. 447-448.
24. Engel, U., Geißdörfer, S., Simulation in Microforming. In: Kuzman, K. (Ed.), Proceedings of the 5th International Conference on Industrial Tools, ICIT 2005, Velenje, Slovenia, April 12-15, 2005, Tecos 2005, Celje Slovenia, pp. 17-26.
25. Fülöp T., Brekelmans W.A.M., and Geers M.G.D. Size Effects from Grain Statistics in Ultra-thin Metal Sheets. Journal of Materials Processes and Technology 174 (2006) 233-238
26. Fleck N.A., and Hutchinson J.W. Strain Gradient Plasticity. Advances in Applied Mechanics 33 (1997) 295-361
27. Ashby, 1970, M.F.: The Deformation of Plastically Non-Homogeneous Materials, Philosophical Magazine, 21, 399-424.
28. Nye J.F. Some Geometrical Relations in Dislocated Crystals. Acta Metallurgica 1 (1953) 153-162
29. Diehl A., Engel U., and Geiger M. Mechanical Properties and Bending Behaviour of Metal Foils. Proceedings of the IMechE, Part B: Journal of Engineering and Manufacturing 222 1 (2008) 83-91
30. Stoelken J.S., and Evans A.G. A Microbend Test Method for Measuring the Plasticity Length Scale. Acta Metallurgica 46 14 (1998) 5109-5115
31. Diehl, A., Geißdörfer, S., Engel, U., 2007, Investigation of Size Dependent Mechanical Properties of Metal Foils in Micro Sheet Metal Forming Processes, in: Clemson University (Ed.), Proceedings of the 2nd International Conference on Micromanufacturing, ICOMM 2007, September 10-13, 2007, Greenville, USA, 2007, pp. 156-161.
32. Hoffmann H., and Hong S. Tensile Test of very Thin Sheet Metal and Determination of Flow Stress Considering the Scaling Effect. Annals of the CIRP 55 1 (2006) 263-266
33. Herzig N., and Meyer L.W. Material Characterisation at High Strain Rates with Special Emphasis on Miniaturisation and Size Dependencies. In: Kleiner M. (Ed). Proceedings of the 2nd International Conference on High Speed Forming. Dortmund, Germany (2006) 13-22
34. El-Magd, M., Korthäuer, M., Ataya, S., 2003, Scaling Effects on the Deformation Behaviour of W/Cu Sintered Composite Materials. In: Vollertsen, F., Hollmann, F., BIAS-Verlag, Strahltechnik 24, 2003, pp. 57-64.
35. Engel U. Tribology in Microforming. WEAR 260 (2006) 265-273
36. Engel U., and Weidel S. Evolution of Surface Topography in Microforming. In: Azushima A. (Ed). Proceedings of the 3rd International Conference on Tribology in Manufacturing Processes, ICTMP 2007, September 24-26. Yokohama, Japan, Yokohama JP, Subaru Planning 2007 (2007) 143-150
37. Krishnan N., Cao J., and Dohda K. Study of the Size Effect on Friction Conditions in Micro-extrusion: Part 1-Micro-extrusion Experiments and Analysis. Transactions of ASME Journal 0f Manufacturing Science and Engineering 129 4 (2007) 669-676
38. Mori L.F., Krishnan N., Cao J., and Espinosa H.D. Study of the Size Effect on Friction Conditions in Micro-extrusion: Part 2-Size Effect in Dynamic Friction for Brass-Steel Pairs. Transactions of ASME Journal of Manufacturing Science and Engineering 129 4 (2007) 677-689
39. Hu Z., Schulze Niehoff H., and Vollertsen F. Tribological Size Effects in Deep Drawing. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (September 20-21, 2007). Bremen, Germany (2007), BIAS Verlag, Bremen 573-582
40. Vollertsen F., and Hu Z. Tribological Size Effects in Sheet Metal Forming Measured by a Strip Drawing Test. Annals of the CIRP 55 1 (2006) 291-294
41. Van Putten K., Franzke M., and Hirt G. Size Effect on Friction and Yielding in Wire Flat Rolling. Annals of the CIRP 55 1 (2006) 583-592
42. Fuentes G.G., Díaz de Cerio M.J., Rodriguez R., Avelar-Batista J.C., Spain E., Housden J., and Qin Y. Investigation on the Sliding of Aluminium Thin Foils Against PVD-coated Carbide Forming-tools during Micro-forming. Journal of Materials Processes and Technology 177 (2007) 644-648
43. Hansen H.N., and Arentoft M. Precision Tooling Technologies for Micro Forming. Journal of Materials Processes and Technology 177 (2007) 157-166
44. Saotome Y., Okaniwa S., Zhang T., and Inoue A. Nanoforming of Metallic Glass with Nano-scale Die Fabricated by Focused Ion Beam. Journal of Metastable and Nanocrystalline Materials Band 24/25 (2004) 291-294
45. Wang C., Shan D., Guo B., Zhou J., and Sun L. Key Problems in Microforming Processes of Microparts. Journal of Materials Science and Technology 23 2 (2007) 283-288
46. Engel U., and Egerer E. Basic Research on Cold and Warm Forging of Microparts. Key Engineering Materials 233-236 (2002) 449-456
47. Egerer E., and Engel U. Process Characterization and Material Flow in Microforming at Elevated Temperatures. Journal of Manufacturing Processes 5 1 (2004) 11-16
48. Eichenhüller B., and Engel U. Microforming of Titanium-Forming Behaviour at Elevated Temperature. Proceedings of the IMechE Part B: Journal of Engineering Manufacturing 222 1 (2008) 77-82
49. Arentoft M., Bruschi S., Paldan N.A., and Holstein J.V. Microforming of Lightweight Metals in Warm Conditions. ESAFORM (2008) 295
50. Pan C.T., Wu T.T., Chen M.F., Chang Y.C., Lee C.J., and Huang J.C. Hot Embossing of Micro-lens Array on Bulk Metallic Glasses. Sensors and Actuators A 141 (2008) 422-431
51. Thome M., Hirt G., and Rattay B. Metal Flow and Die Filling in Coining of Micro Structures With and Without Flash. Advanced Materials Research 6-8 (2005) 631-638
52. Wang C.J., Shan D.B., Zhou J., Guo B., and Sun L.N. Size Effects of the Cavity Dimension on the Microforming Ability During Coining Process. Journal of Materials Processes Technology 187/188 (2007) 256-259
53. Parasiz S.A., Kinsey B., Krishan N., Cao J., and Li M. Investigation of Deformation Size Effects During Microextrusion. Journal of Manufacturing Science and Engineering 129 4 (2007) 690-697
54. Rosochowski A., Presz W., Olejnik L., and Richert M. Micro-Extrusion of Ultra-fine Grained Aluminium. International Journal of Advanced Manufacturing Technology 33 1/2 (2007) 137-146
55. Kim W.J., and Sa Y.K. Micro-extrusion of ECAP Processed Magnesium Alloy for the Production of High Strength Magnesium Micro-gears. Scripta Materialia 54 (2006) 1391-1395
56. Hirota K. Fabrication of Micro-billet by Sheet Extrusion. Journal of Materials Processes Technology 191 (2007) 283-287
57. Eckstein R. Scherschneiden und Biegen Metallischer Kleinstteile-Materialeinfluss und Materialverhalten. In: Geiger M., and Feldmann K. (Eds). Fertigungstechnik-Erlangen, Bd. 120 (2003), Meisenbach, Bamberg
58. Geiger M., Engel U., Vollertsen F., Kals R., and Meßner A. Umformtechnische Herstellung von Kleinstteilen für die Elektronik. In: Feldmann K., and Geiger M. (Eds). Sonderforschungsbereich 356. Produktionssysteme in der Elektronik. Abschlussbericht des Sonderfoschungsbereiches 1992-2004 (2004), Meisenbach, Bamberg 33-72
59. Lemiale V., and Picart P. Modelling and Simulation of Precision Blanking for very Thin Components. In: Kusiak J., Hartley P., Majta J., Pillinger I., and Pietrzyk M. (Eds). Proceedings of the 10th International Conference on Metal Forming, September 19-22. Krakow, Poland (2004) 413-416
60. Gau J.T., Principe C., and Yu M. Springback Behavior of Brass in Micro Sheet Forming. Journal of Materials Processes Technology 191 (2007) 7-10
61. Cheng P., Yao Y.L., Liu C., Pratt D., and Fan Y. Analysis and Prediction of Size Effect on Laser Forming of Sheet Metal. Transactions of the North American Manufacturing Research Institute of SME 32 (2004) 439-446
62. Justinger H., Witulski N., and Hirt G. Experimental and Numerical Investigation of Miniaturisation in Deep Drawing. In: Kusiak J., Hartley P., Majta J., Pillinger I., and Pietrzyk M. (Eds). Proceedings of the 10th International Conference on Metal Forming, September 19-22. Krakow, Poland (2004) 693-698
63. Vollertsen F., Hu Z., Schulze Niehoff H., and Theiler C. State of the Art in Microforming and Investigations into Micro Deep Drawing. Journal of Materials Processes Technology 151 (2004) 70-79
64. [ustinger H., and Hirt G. Scaling Effects in the Miniaturization of the Deep Drawing Process. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology, September 20-21. Bremen, Germany (2007), BIAS Verlag, Bremen 665-674
65. Hassan M.A., Takakura N., and Yamaguchi K. Friction Aided Deep Drawing of Sheet Metals Using Polyurethane Ring and Auxiliary Metal Punch. Part 1: Experimental Observations on the Deep Drawing of Aluminium Thin Sheets and Foils. International Journal of Machine Tools & Manufacture 42 (2002) 625-631
66. Marumo Y., Saiki H., and Ruan L. Prevention of Wrinkling and Fracturing in Deep Drawing of Metal Foil Using Resin Dies and Auxiliary Sheets. In: Kusiak J., Hartley P., Majta J., Pillinger I., and Pietrzyk M. (Eds). Proceedings of the 10th International Conference on Metal Forming, September 19-22. Krakow, Poland (2004) 273-277
67. Joo B.Y., Oh S.I., and Son Y.K. Forming of Micro Channels with Ultra Thin Metal Foils. Annals of the CIRP 53 1 (2004) 243-246
68. Schulze Niehoff H., Hu Z., and Vollertsen F. Mechanical and Laser Micro Deep Drawing. Key Engineering Materials 344 (2007) 799-806
69. http://www.bruderer-presses.com/
70. Groche P., and Schneider R. Method for the Optimization of Forming Presses for the Manufacturing of Micro Parts. Annals of the CIRP 53 1 (2004) 281-284
71. Schulze-Niehoff H., and Vollertsen F. Entwicklung Einer Hochdynamischen, Zweifachwirkenden Mikroumformpresse. In: Vollertsen F., and Jüptner W. (Eds). Reihe Strahltechnik Band 27 (2005), BIAS Verlag, Bremen 105-118
72. Paldan N.A., Arentoft M., and Eriksen R.S. Production Equipment and Processes for Bulk Formed Micro Components. AIP Conference Proceedings 907 (2007) 463-468
73. Withen C.P., Marstrand J.R., Arentoft M., and Paldan N.A. Flexible Tool System for Cold Forging of Micro-components. In: Menz W., and Dimov S. (Eds). Proceedings of the 1st International Conference on Multi-Material Micro Manufacture, 4M 2005. Karlsruhe, Germany, June 29-July 1 (2005), Elsevier, London 143-146
74. Eriksen R.S., Arentoft M., and Paldan N.A. Tool design and Manufacturing for Bulk Forming of Micro Components. AIP Conference Proceedings 907 (2007) 457-462
75. Tani T., and Mohri N. Recent Evolution of Electrical Discharge Machining. In: Menz W., Dimov S., and Fillon F. (Eds). Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture, 4M 2006. Grenoble, France, September 20-22 (2006), Elsevier, London 23-26
76. Brinksmeier E., and Riemer O. Metal Cutting of Microstructures. Proceedings of the 1st Internatinal Conference on Multi-Material Micro Manufacture, 4M 2005. Karlsruhe, Germany, June 29-July 1 (2005), Elsevier, London 19-25
77. Fleischer J., and Kotschenreuther J. The Manufacturing of Micro Molds by Conventional and Energy-assisted Processes. International Journal of Advanced Manufacturing Technology 33 1/2 (2007) 75-85
78. Sanchez-Salmeron A.J., Lopez-Tarazon R., Guzman-Diana R., and Ricolfe-Viala C. Recent Development in Micro-Handling Systems for Micro-manufacturing. Journal of Materials Processes Technology 167 (2005) 499-507
79. Zengen, K.-H., von Possehn, T., 2002, Aluminum-the Light Body Material, Proceedings of New Advances in Body Engineering, ika Aachen, D.
80. N.N., Ultralight Steel Autobody Advanced Vehicle Concepts (ULSAB-AVC), www.ulsab-avc.org.
81. Broge J.L. The Battle of the Metals. Automotive Engineering International 108 8 (2000) 36-53
82. Merklein M., and Geiger M. New Materials and Production Technologies for Innovative Lightweight Constructions. Journal of Materials Processing Technology 125/126 (2002) 532-536
83. Drewes, E.-J., Prange, W., 2001, Innovative Halbzeuge für den Leichtbau mit Stahl, Proceedings 16, Aachener Stahlkolloquium, Aachen D, pp. 207-221.
84. Kwon H.H., Chang C.C., and Bramley A.N. Ceramic Inserts for Forging Tools-Optimizing the Design. Proceedings of the MATADOR Conference. Manchester, GB (2000) 367-372
85. Wagemann A. Werkzeuge aus Hochleistungskeramik senken Umformkräfte und erzielen höhere Standmengen. Maschinenmarkt, Würzburg, D 104 39 (1998) 30-32
86. Müller O., Albers A., Sauter J., and Allinger P. Topology Optimization of Large Real World Structures. Proceedings of the NAFEMS World Congress. Newport, RI, USA (1999)
87. DIN 9005, 1974, Gesenkschmiedestücke aus Magnesiumknetlegierungen, Grundlagen für die Konstruktion, Blatt 2.
88. Doege E., Griesbach B., and Schulz-Marner H. Adaptive Werkzeugkonzepte zur Umformung von Gefügten Halbzeugen. Proceedings of the Leichtbau durch Intelligente Blechbearbeitung. EFB-Kolloquium, Stuttgart, D (1997)
89. Kopp, R., Hohmeier, P., Wiedner, C., 2002, Deep Drawing and Stretch Forming of Geometrically Inhomogeneous Lightweight Construction Components. Production Engineering IX/1, Annals of the German Academic Society for Production Engineering.
90. Chatti S., Heller B., Kleiner M., and Ridane N. Forming and Further Processing of Tailor Rolled Blanks for Lightweight Structures. Advanced Technology of Plasticity II (2002) 1387-1392
91. Friebe, E. et al, 2001, Hydromechnical Deep Drawing of Passenger Car Fuel Tanks. Hydroforming of Tubes, Extrusions and Sheets. vol. 2, MAT-INFO, Frankfurt, D, pp. 193-213.
92. Chatti, S., 2006, Production of Profiles for Lightweight Structures. Habilitation Thesis, University of Franche-Comté, France, Books on Demand GmbH, Germany.
93. N.N., Leicht und Doch Stabil, Intelligente Leichtbaukonzepte mit Aluminumrohren, Gesamtverband der deutschen Aluminumindustrie, www.aluinfo.de/249.html.
94. Mayer, H., Venier, F., Koglin, K., 2002, Die ASF-Karosserie des Audi A8, The new Audi A8-special edition of ATZ/MTZ, pp. 94-108.
95. Schumann S., and Friedrich H. Current and Future use of Magnesium in the Automobile Industry. Proceedings of the Magnesium Alloys 2003, vol. 1. Osaka, Japan (2003) 51-56
96. Langerak N., and Kragtwijk S. The Application of Steel and Aluminum in a New Lightweight Car Body Design. Proceedings of the International Body Engineering Conference (IBEC). Society of Automotive Engineers (SAE), Detroit, MI, USA (1998)
97. Klaus A., Arendes D., Chatti S., and Kleiner M. Direct Rounding of Profiles During Extrusion. Proceedings of the 7th International Aluminum Extrusion Technology Seminar, vol. 2. Chicago, USA (2000) 415-420
98. Klaus A., Chatti S., and Kleiner M. Advanced Manufacturing of Curved Profiles for Hydroforming. Light Metal Age (April 2001) 66-69
99. Gusinde A., and Hoogen M. Aluminumblechwerkstoffe, Einsatz in der Automobilherstellung. Proceedings of the Landshuter Leichtbaukolloquium. Landshut, D (2003) 47-54
100. http://www.ulsab.org
101. Ruch, W., Zengen, K.-H. von Possehn, T., 2000, Großserienfertigung von Aluminumkarosserien, Neuere Entwicklungen in der Blechumformung, MAT INFO, Frankfurt, pp. 315-330.
102. Rohleder, M.W., 2001, Simulation Rückfederungsbedingter Formabweichungen im Produktentstehungsprozess von Blechformteilen PhD-Thesis, Dortmund University.
103. Schmoeckel D., Hielscher C., Huber R., and Geiger M. Metal Forming of Tubes and Sheets with Liquid and Other Flexible Media. Annals of the CIRP 48/2 (1999) 497-513
104. Hein P., and Geiger M. Advanced Process Control Strategies for the Hydroforming of Sheet Metal Pairs. Advanced Technology of Plasticity II (1999) 1267-1272
105. Kleiner, M., Gartzke, A., Kolleck, R. 1997, Experimental and Finite Element Analysis of Capabilities and Limits of A Combined Pneumatic and Mechanical Deep Drawing Process, Annals of the CIRP 46/1, p. 201.
106. Siegert, K., Aust, M., 2000, Hydromechanical Deep-drawing. Production Engineering VII/2, Annals of the German Academic Society for Production Engineering, 7-12.
107. Kleiner M., Homberg W., and Brosius A. Processes and Control of Sheet Metal Hydroforming. Advanced Technology of Plasticity 2 (1999) 1243-1252
108. Homberg, W., 2000, Untersuchungen zur Prozessführung und zum Fertigungssystem bei der Hochdruck-Blech-Umformung, PhD-thesis, Dortmund University.
109. Hahn, O., Bangel, M., 2002, Clinchen von Stahl und Aluminum in Hybridbauweise, UTF Science III, Meisenbach, Bamberg, 21-24.
110. Kleiner, M. Baier, H., Fleischer, J. Löhe, D., Weinert, K., Zäh, M., Schikorra, M., 2007, Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen, Fortschr. Ber. VDI Reihe 2 Nr. 661, VDI-Verlag Düsseldorf, 2007, ISBN 9783183661022.
111. Leszak, E., 1967, Apparatus and Process for Incremental Dieless Forming, US Patent US3342051A1, Published September 19, 1967.
112. Jeswiet, J, Micari, F., Hirt, G., Bramley, A., Duflou, J., Allwood, J., 2005, Asymmetric Single Point Incremental Forming of Sheet Metal, Annals of CIRP, 54/2, 623-650.
113. Bambach M., Hirt G., and Junk S. Modelling and Experimental Evaluation of the Incremental cnc Sheet Metal Forming Process. Proceedings of the 7th International Conference on Computational Plasticity, COMPLAS. Barcelona, April 7-10 (2003)
114. Micari, F., 2004, Single Point Incremental Forming: Recent Results. Seminar on Incremental Forming, October 22, Cambridge University, CDRom.
115. Hirt, G., Ames, J., 2003, Environmental and Economic Benefits of cnc Incremental Sheet Forming for Prototyping and Low Volume Production of Sheet Components, In: Proceedings of the 9th International Workshop on Ecology and Economy in Manufacturing - ICEM 2003, October 18-21, Miskolc, Hungary, no. 10, pp. 70-79.
116. Ham M., Jeswiet J., Annals of CIRP, 56/1, 2007, 277-280.
117. Martins, P.A.F., Bay, N., Skjoedt, M., Silva, M.B., in press, Theory of Single Point Incremental Forming, Annals of CIRP, 56/1.
118. Jeswiet J., and Hagan E. Rapid Proto-typing of a Headlight with Sheet Metal. Proceedings of the 9th International Conference on Sheet Metal. Leuven, April (2001) 165-170
119. Hirt G., Junk S., Bambach M., and Chouvalova I. Process Limits and Material Behaviour in Incremental Sheet Forming with CNC-tools. Proceedings of the International Conference on Processing & Manufacturing of Advanced Materials, THERMEC 2003. Leganés, Madrid, July 7-11 (2003)
120. Skjoedt M., Bay N., Endelt B., Ingarao G., in press, Multi Stage Strategies for Single Point Incremental Forming of a Cup, Proceedings of the 11th ESAFORM Conference on Material Forming, Lyon.
121. Duflou, J.R., Verbert, J., Belkassem, B., Gu. J., Sol, H., Henrard, C., Habraken, A.M., 2008. Process Window Enhancement for Single Point Incremental Forming Through Multi-step Toolpaths, Annals of CIRP, 56/1.
122. Duflou, J.R., Callebaut, B.J., Verbert, J., De Baerdemaeker, H., 2007, Laser Assisted Incremental Forming: Formability and Accuracy Improvement, Annals of CIRP, 55/1, 226-272.
123. Allwood J.M., King G.P.F., and Duflou J. A Structured Search for Applications of the Incremental Sheet Forming Process by Product Segmentation. Proceedings of the IMechE, Part B, Journal of Engineering Manufacture 219 B2 (2004) 239-244
124. Lasunon O., and Knight W. Comparative Investigation of Single Point and Double-Point Incremental Sheet Metal Forming Processes. Journal of Engineering Manufacture IMECHE 222 3 (2008) 381-389
125. Hirt, G., Ames, J., Bambach, M., Kopp, R., 2004, Forming Strategies and Process Modelling for cnc Incremental Sheet Forming, Annals of CIRP, 53/1, 203-206.
126. Duflou J.R., Lauwers B., Verbert J., Tunckol Y., and De Baerdemaeker H. Achievable Accuracy in Single Point Incremental Forming: Case Studies. Proceedings of the 8th ESAFORM Conference on Material Forming. Cluj Napoca, April (2005) 675-678
127. Ambrogio G., De Napoli L., Filice L., and Muzzupappa M. Improvement of Geometrical Precision in Sheet Incremental Forming Processes. Proceedings of the 7th ASME Conference on Engineering System Design and Analysis. Manchester, UK, July 19-22 (2004) (on CDRom)
128. Verbert J., Duflou J.R., and Lauwers B. Feature Based Approach for Increasing the Accuracy of the SPIF Process. Key Engineering Materials 344 (2007) 527-534
129. Duflou J.R., D'Hondt, J., 2007, Applying TRIZ for Systematic Manufacturing Process Innovation: The Single Point Incremental Forming Case, Proceedings of the ETRIA TRIZ Future Conference, TFC2007, Frankfurt, November, pp 55-60.
130. Maidagan E., Zettler J., Bambach M., Rodriguez P.P., and Hirt G. A New Incremental Sheet Forming Process Based on a Flexible Supporting Die System. Proceedings of the 12th International Conference on Sheet Metal. Palermo, April (2007) 607-614
131. Meier H., Smukala V., Dewald O., and Zhang J. Two Pont Incremental Forming with Two Moving Forming Tools. Proceedings of the 12th International Conference on Sheet Metal. Palermo, April (2007) 599-605
132. Duflou J.R., Callebaut B., Verbert J., De Baerdemaeker H., Improved SPIF Performance Through Dynamic Local Heating, Journal of Machine Tools and Manufacture, 48/5, 543-549.
133. Neugebauer R., and Bräunlich H. Lightweight Construction by Innovative Forming Technologies. Proceedings of the 6th ICTP. Nuremberg (1999) 1119-1128
134. Geiger, M., Hofmann, A., 1999, Neue Entwicklungen in der Aluminiumblechumformung, Das Umformen von Aluminium im Automobilbau, Bad Nauheim, Workshop Forum, pp. 111-131.
135. Neugebauer, R., 2006, Sheet Metal Forming at Elevated Temperatures, Annals of CIRP, 55/2, 623-650.
136. Palaniswamy H., and Altan T. Warm Deep Drawing of mg Alloy Sheet. Stamping Journal 10/11 (2003) 34
137. Neugebauer, R., Göschel, A., Sterzing, A., Kurka, P., Seifert, M., 2005, Comparison of Material Behaviour and Economic Effects of Cold and High Temperature Forming Technologies Applied to High-strength Steels, Proceedings of the SheMet 2005, 101-108.
138. Lorenz D., and Roll K. Aspekte der Prozesssimulation beim Presshärten höchstfester Stähle. Proceedings of the EFB Colloquium T25 (2005) 139-149
139. Kolleck, R., Pfanner, S., Warnke, E.-P., Ganter, R., 2005, Neues Konzept zur Temperierung von Blechumformwerkzeugen, Proceedings of the 4th CBC, pp. 121-135.
140. Geiger, M., Merklein, M., Hoff, C., 2005, Basic Investigations on the Hot Stamping Steel 22MnB5, Proceedings of the SheMet 2005, pp. 795-804.
141. Neugebauer, R., Sterzing, A., Seifert, M., Kurka, P., 2005, The Potential and Application Limits of Temperature-supported Hydroforming of Magnesium Alloys, Proceedings of the 8th ICTP, p. 293.
142. Geiger, M., Merklein, M., Hecht, J., 2006, Fertigungsaspekte zur umformtechnischen Herstellung von Bauteilen aus Magnesiumblech, EFB-Kolloquium 2006.
143. Kleiner M., Homberg W., Rauscher B., and Gösling M. Towards the Simulation and Control of the Gas-pressure Forming of Al 5754 Sheet at Elevated Temperatures. Steel Research International 76 11 (2005) 925-930
144. Beck W. FormTech, In-house Cone-cup Testing of Low to High Temperature SPF-alloys. Materials Science Forum 447-448 (2004) 145-152
145. Dykstra, B., 2001, Hot Metal Gas Forming for Manufacturing Vehicle Structural Components, Metal Forming.
146. Klocke F., and Wehrmeister T. Laser-assisted Metal Spinning of Advanced Materials. Proceedings of the 4th LANE (2004) 1183-1192
147. Huber, A., 2001, Justieren Vormontierter Systeme Mit dem Nd:YAG-laser unter Einsatz von Aktoren, Reihe Fertigungstechnik Erlangen, vol. 114, University of Erlangen-Nuremberg, Meisenbach, Bamberg.
148. Bariani P.F., Bruschi S., and Dal Negro T. Testing and Modelling Material Response to Deformation in Bulk Metal Forming. Cirp Annals - Manufacturing Technology 53 2 (2004) 573-596
149. Bariani P.F., Bruschi S., and Ghiotti A. Material Testing and Physical Simulation in Modelling Process Chains Based on Forging Operations. Computer Methods in Materials Science 7 4 (2007) 378-382
150. Fanini S., Ghiotti A., and Bruschi S. Prediction of the Fracture Due to Mannesmann Effect in Tube Piercing. Proceedings of the 9th Numiform. Porto, Portugal, June (2007)