Finite Element Modeling of the Spine

Spine Technology Handbook

Volumn , Issue , 2006, Pages 443-471

  Bowden, Anton ^a  

^a EXPONENT INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 52449089136     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-012369390-7/50015-0     Document Type: Chapter

References (175)

1. C. Adam, M. Pearcy and P. McCombe (2003) Stress Analysis of Interbody Fusion: Finite Element Modeling of Intervertebral Implant and Vertebral Body. Clin. Biomech. (Bristol, Avon) 18 265-272.
2. J.H. Argyris (1954) Energy Theorems and Structural Analysis. Aircraft Engineering 26 347-356.
3. J.H. Argyris (1954) Energy Theorems and Structural Analysis. Aircraft Engineering 26 383-387.
4. J.H. Argyris (1955) Energy Theorems and Structural Analysis. Aircraft Engineering 42-58.
5. J.H. Argyris (1955) Energy Theorems and Structural Analysis. Aircraft Engineering 27 80-94.
6. J.H. Argyris (1955) Energy Theorems and Structural Analysis. Aircraft Engineering 27 125-134.
7. J.H. Argyris (1955) Energy Theorems and Structural Analysis. Aircraft Engineering 27 145-158.
8. D.C. Ayotte, K. Ito, S.M. Perren and S. Tepic (2000) Direction-dependent Constriction Flow in a Poroelastic Solid: The Intervertebral Disc Valve. J. Biomech. Eng. 122 587-593.
9. A.E. Baer, T.A. Laursen, F. Guilak and L.A. Setton (2003) The Micromechanical Environment of Intervertebral Disc Cells Determined by a Finite Deformation, Anisotropic, and Biphasic Finite Element Model. J. Biomech. Eng. 125 1-11.
10. G. Baroud, J. Nemes, P. Heini and T. Steffen (2003) Load Shift of the Intervertebral Disc After a Vertebroplasty: A Finite-element Study. Eur. Spine J. 12 421-426.
11. K.-J. Bathe (1996) Finite Element Procedures Upper Saddle River, NJ: Prentice-Hall, Inc
12. S.E. Benzley, E. Perry, et al. (1995) A Comparison of All Hexagonal and All Tetrahedral Finite Element Meshes for Elastic and Elasto-plastic Analysis. 4th International Meshing Roundtable Sandia National Laboratories Albuguerque, NM
13. J.S. Bergström, C.M. Rimnac and S.M. Kurtz (2003) Prediction of Multiaxial Behavior for Conventional and Highly Crosslinked UHMWPE Using a Hybrid Constitutive Model. Biomaterials 24 1365-1380.
14. A.E. Bowden (2003) Tools for Deformable Image Registration. Bioengineering Salt Lake City: University of Utah
15. A.E. Bowden, M.L. Villarraga, A.A. Edidin and S.M. Kurtz (2005) Advanced Numerical Modeling of Spinal Biomechanics. Spine Research Symposium Philadelphia, PA
16. A.E. Bowden, M.V. Villarraga, A.A. Edidin and S.M. Kurtz (2005) Numerical Simulation of Vertebral Collapse. Philadelphia Spine Research Symposium Philadelphia, PA
17. K. Brolin and P. Halldin (2004) Development of a Finite Element Model of the Upper Cervical Spine and a Parameter Study of Ligament Characteristics. Spine 29 376-385.
18. A.R. Burks and A.W. Burks (1989) The First Electronic Computer: The Atanasoff Story Ann Arbor, MI: University of Michigan Press
19. J. Calisse, A. Rohlmann and G. Bergmann (1999) Estimation of Trunk Muscle Forces Using the Finite Element Method and In Vivo Loads Measured by Telemeterized Internal Spinal Fixation Devices. J. Biomech. 32 727-731.
20. D.L. Camacho, R.W. Nightingale and B.S. Myers (1999) Surface Friction in Near-vertex Head and Neck Impact Increases Risk of Injury. J. Biomech. 32 293-301.
21. B.H. Chen, R.N. Natarajan, H.S. An and G.B. Andersson (2001) Comparison of Biomechanical Response to Surgical Procedures Used for Cervical Radiculopathy: Posterior Keyhole Foraminotomy Versus Anterior Foraminotomy and Discectomy Versus Anterior Discectomy with Fusion. J. Spinal Disord. 14 17-20.
22. C.S. Chen, C.K. Cheng and C.L. Liu (2002) A Biomechanical Comparison of Posterolateral Fusion and Posterior Fusion in the Lumbar Spine. J. Spinal Disord. Tech. 15 53-63.
23. C.S. Chen, C.K. Cheng, C.L. Liu and W.H. Lo (2001) Stress Analysis of the Disc Adjacent to Interbody Fusion in Lumbar Spine. Med. Eng. Phys. 23 483-491.
24. C.S. Chen, C.K. Feng, et al. (2005) Biomechanical Analysis of the Disc Adjacent to Posterolateral Fusion with Laminectomy in Lumbar Spine. J. Spinal Disord. Tech. 18 58-65.
25. S.I. Chen, R.M. Lin and C.H. Chang (2003) Biomechnical Investigation of Pedicle Screw-vertebrae Complex: A Finite Element Approach Using Bonded and Contact Interface Conditions. Med. Eng. Phys. 25 275-282.
26. E. Chosa, K. Goto, K. Totoribe and N. Tajima (2004) Analysis of the Effect of Lumbar Spine Fusion on the Superior Adjacent Intervertebral Disk in the Presence of Disk Degeneration, Using the Three-dimensional Finite Element Method. J. Spinal Disord. Tech. 17 134-139.
27. E. Chosa, K. Totoribe and N. Tajima (2004) A Biomechanical Study of Lumbar Spondylolysis Based on a Three-dimensional Finite Element Method. J. Orthop. Res. 22 158-163.
28. R.D. Cook, D.S. Malkus and M.E. Plesha (1989) Concepts and Applications of Finite Element Analysis New York, NY: John Wiley & Sons
29. R.P. Crawford, C.E. Cann and T.M. Keaveny (2003) Finite Element Models Predict In Vitro Vertebral Body Compressive Strength Better Than Quantitative Computed Tomography. Bone 33 744-750.
30. R.P. Crawford, W.S. Rosenberg and T.M. Keaveny (2003) Quantitative Computed Tomography-based Finite Element Models of the Human Lumbar Vertebral Body: Effect of Element Size on Stiffness, Damage, and Fracture Strength Predictions. J. Biomech. Eng. 125 434-438.
31. J.D. Currey (1984) Effects of Differences in Mineralization on the Mechanical Properties of Bone. Philos. Trans. R. Soc. Lond. B. Biol. Sci. 304 509-518.
32. J.D. Currey (1988) The Effect of Porosity and Mineral Content on the Young's Modulus of Elasticity of Compact Bone. J. Biomech. 21 131-139.
33. F.H. Dar, J.R. Meakin and R.M. Aspden (2002) Statistical Methods in Finite Element Analysis. J. Biomech. 35 1155-1161.
34. P. Dolan and M.A. Adams (2001) Recent Advances in Lumbar Spinal Mechanics and Their Significance for Modelling. Clin. Biomech. (Bristol, Avon) 16(Suppl. 1), S8-S16.
35. A.P. Dooris, V.K. Goel, et al. (2001) Load-sharing Between Anterior and Posterior Elements in a Lumbar Motion Segment Implanted with an Artificial Disc. Spine 26 E122-E129.
36. D.M. Elliott and L.A. Setton (2000) A Linear Material Model for Fiber-induced Anisotropy of the Anulus Fibrousus. J. Biomech. Eng. 122 173-179.
37. D.M. Elliott and L.A. Setton (2001) Anisotropic and Inhomogeneous Tensile Behavior of the Human Anulus Fibrosus: Experimental Measurement and Material Model Predictions. J. Biomech. Eng. 123 256-263.
38. D.R. Epari, F. Kandziora and G.N. Duda (2005) Stress Shielding in Box and Cylinder Cervical Interbody Fusion Cage Designs. Spine 30 908-914.
39. F. Ezquerro, A. Simon, M. Prado and A. Perez (2004) Combination of Finite Element Modeling and Optimization for the Study of Lumbar Spine Biomechanics Considering the 3D Thorax-pelvis Orientation. Med. Eng. Phys. 26 11-22.
40. FDA (Food and Drug Administration) (2004) FEA Software Enables Study of Tissue Ablation Dynamics NASA Tech Briefs
41. S.J. Ferguson, K. Ito and L.P. Nolte (2004) Fluid Flow and Convective Transport of Solutes Within the Intervertebral Disc. J. Biomech. 37 213-221.
42. C.M. Ford and T.M. Keaveny (1996) The Dependence of Shear Failure Properties of Trabecular Bone on Apparent Density and Trabecular Orientation. J. Biomech. 29 1309-1317.
43. H. Frei, T.R. Oxland, G.C. Rathonyi and L.P. Nolte (2001) The Effect of Nucleotomy on Lumbar Spine Mechanics in Compression and Shear Loading. Spine 26 2080-2089.
44. D.P. Fyhrie and D.R. Carter (1986) A Unifying Principle Relating Stress to Trabecular Bone Morphology. J. Orthop. Res. 4 304-317.
45. L.J. Gibson (1985) The Mechanical Behaviour of Cancellous Bone. J. Biomech. 18 317-328.
46. V.K. Goel and J.D. Clausen (1998) Prediction of Load Sharing Among Spinal Components of a C5–C6 Motion Segment Using the Finite Element Approach. Spine 23 684-691.
47. V.K. Goel and L.G. Gilbertson (1995) Applications of the Finite Element Method to Thoracolumbar Spinal Research: Past, Present, and Future. Spine 20 1719-1727.
48. M. Goto, N. Kawakami, et al. (2003) Buckling and Bone Modeling As Factors in the Development of Idiopathic Scoliosis. Spine 28 364-370. discussion 371
49. K. Goto, N. Tajima, et al. (2002) Mechanical Analysis of the Lumbar Vertebrae in a Three-Dimensional Finite Element Method Model in Which Intradiscal Pressure in the Nucleus Pulposus Was Used to Establish the Model. J. Orthop. Sci. 7 243-246.
50. K. Goto, N. Tajima, et al. (2003) Effects of Lumbar Spinal Fusion on the Other Lumbar Intervertebral Levels (Three-dimensional Finite Element Analysis). J. Orthop. Sci. 8 577-584.
51. M.J. Griffin (2001) The Validation of Biodynamic Models. Clin. Biomech. (Bristol, Avon) 16(Suppl. 1), S81-S192.
52. W.Y. Gu and H. Yao (2003) Effects of Hydration and Fixed Charge Density on Fluid Transport in Charged Hydrated Soft Tissues. Ann. Biomed. Eng. 31 1162-1170.
53. L.X. Guo, E.C. Teo, K.K. Lee and Q.H. Zhang (2005) Vibration Characteristics of the Human Spine Under Axial Cyclic Loads: Effect of Frequency and Damping. Spine 30 631-637.
54. J. Hadamard (1902) Sur les Problemes aux Derives Partielles et Leur Signification Physique. Bull. Univ. Princeton 13 49-52.
55. A.V. Hill (1938) The Heat of Shortening and the Dynamic Constraints of Muscle. Proc. Roy. Soc. B126 136-195.
56. R. Hodgskinson and J.D. Currey (1990) Effects of Structural Variation on Young's Modulus of Non-human Cancellous Bone. Proc. Inst. Mech. Eng. [H] 204 43-52.
57. N. Hong-Wan, T. Ee-Chon and Z. Qing-Hang (2004) Biomechanical Effects of C2–C7 Intersegmental Stability Due to Laminectomy with Unilateral and Bilateral Facetectomy. Spine 29 1737-1745. discussion 1746
58. F.J. Hou, S.M. Lang, et al. (1998) Human Vertebral Body Apparent and Hard Tissue Stiffness. J. Biomech. 31 1009-1015.
59. D.W. Hukins, M.C. Kirby, et al. (1990) Comparison of Structure, Mechanical Properties, and Functions of Lumbar Spinal Ligaments. Spine 15 787-795.
60. A. Hurwitz and R. Courant (1922) 4th Ed Vorlesunger über Allgemeine Funcktionen Theorie vol 3 Springer Grundlehren der mathematischer Wissenschaften
61. M. Ito, A. Nishida, et al. (2002) Contribution of Trabecular and Cortical Components to the Mechanical Properties of Bone and Their Regulating Parameters. Bone 31 351-358.
62. M.J. Jaasma, H.H. Bayraktar, G.L. Niebur and T.M. Keaveny (2002) Biomechanical Effects of Intraspecimen Variations in Tissue Modulus for Trabecular Bone. J. Biomech. 35 237-246.
63. N.C. Jensen, L.P. Madsen and F. Linde (1991) Topographical Distribution of Trabecular Bone Strength in the Human Os Calcanei. J. Biomech. 24 49-55.
64. C.S. Jorgensen and T. Kundu (2002) Measurement of Material Elastic Constants of Trabecular Bone: A Micromechanical Analytic Study Using a 1-GHz Acoustic Microscope. J. Orthop. Res. 20 151-158.
65. N. Kawahara, H. Murakami, et al. (2003) Reconstruction After Total Sacrectomy Using a New Instrumentation Technique: A Biomechanical Comparison. Spine 28 1567-1572.
66. A. Kiefer, A. Shirazi-Adl and M. Parnianpour (1998) Synergy of the Human Spine in Neutral Postures. Eur. Spine J. 7 471-479.
67. Y. Kim (2001) Prediction of Mechanical Behaviors at Interfaces Between Bone and Two Interbody Cages of Lumbar Spine Segments. Spine 26 1437-1442.
68. W.Z. Kong and V.K. Goel (2003) Ability of the Finite Element Models to Predict Response of the Human Spine to Sinusoidal Vertical Vibration. Spine 28 1961-1967.
69. W.Z. Kong, V.K. Goel, L.G. Gilbertson and J.N. Weinstein (1996) Effects of Muscle Dysfunction on Lumbar Spine Mechanics: A Finite Element Study Based on a Two Motion Segments Model. Spine 21 2197-2206. discussion 2206–2207
70. V. Kosmopoulos and T.S. Keller (2004) Damage-based Finite-element Vertebroplasty Simulations. Eur. Spine J. 13 617-625.
71. S. Kumaresan, N. Yoganandan and F.A. Pintar (1998) Finite Element Modeling Approaches of Human Cervical Spine Facet Joint Capsule. J. Biomech. 31 371-376.
72. S. Kumaresan, N. Yoganandan and F.A. Pintar (1999) Finite Element Analysis of the Cervical Spine: A Material Property Sensitivity Study. Clin. Biomech. (Bristol, Avon) 14 41-53.
73. S. Kumaresan, N. Yoganandan, F.A. Pintar and D.J. Maiman (1999) Finite Element Modeling of the Cervical Spine: Role of Intervertebral Disc Under Axial and Eccentric Loads. Med. Eng. Phys. 21 689-700.
74. S. Kumaresan, N. Yoganandan, et al. (2001) Contribution of Disc Degeneration to Osteophyte Formation in the Cervical Spine: A Biomechanical Investigation. J. Orthop. Res. 19 977-984.
75. S.M. Kurtz (2004) The UHMWPE Handbook San Diego: Elsevier Academic Press
76. S.M. Kurtz, J.R. Foulds and C.W. Jewett (1997) Validation of a Small Punch Testing Technique to Characterize the Mechanical Behavior of Ultra-high Molecular Weight Polyethylene. Biomaterials 18 1659-1663.
77. S.M. Kurtz, C.W. Jewett, J.R. Foulds and A.A. Edidin (1999) A Miniature-specimen Mechanical Testing Technique Scaled to the Articulating Surface of Polyethylene Components for Total Joint Arthroplasty. J. Biome. Mater. Res. (Appl. Biomater.) 48 75-81.
78. N.A. Langrana, R.R. Harten, et al. (2002) Acute Thoracolumbar Burst Fractures: A New View of Loading Mechanisms. Spine 27 498-508.
79. S. Lasser and J. Pugh (1977) Preferred Orientations in Cancellous Bone: Techniques for Determination and Possible Biomechanical Significance [Proceedings] Bull. Hosp. Joint. Dis. 38 8-9.
80. C.K. Lee, Y.E. Kim, et al. (2000) Impact Response of the Intervertebral Disc in a Finite-element Model. Spine 25 2431-2439.
81. K.K. Lee and E.C. Teo (2004) Effects of Laminectomy and Facetectomy on the Stability of the Lumbar Motion Segment. Med. Eng. Phys. 26 183-192.
82. K.K. Lee and E.C. Teo (2004) Poroelastic Analysis of Lumbar Spinal Stability in Combined Compression and Anterior Shear. J. Spinal Disord. Tech. 17 429-438.
83. K.K. Lee, E.C. Teo, et al. (2004) Finite-element Analysis for Lumbar Interbody Fusion Under Axial Loading. IEEE Trans. Biomed. Eng. 51 393-400.
84. M.A. Liebschner, D.L. Kopperdahl, W.S. Rosenberg and T.M. Keaveny (2003) Finite Element Modeling of the Human Thoracolumbar Spine. Spine 28 559-565.
85. M.A. Liebschner, W.S. Rosenberg and T.M. Keaveny (2001) Effects of Bone Cement Volume and Distribution on Vertebral Stiffness After Vertebroplasty. Spine 26 1547-1554.
86. T.H. Lim, J.G. Kim, et al. (2001) Biomechanical Evaluation of Diagonal Fixation in Pedicle Screw Instrumentation. Spine 26 2498-2503.
87. T.H. Lim, H. Kwon, et al. (2001) Effect of Endplate Conditions and Bone Mineral Density on the Compressive Strength of the Graft-end plate Interface in Anterior Cervical Spine Fusion. Spine 26 951-956.
88. C.Y. Lin, C.C. Hsiao, P.Q. Chen and S.J. Hollister (2004) Interbody Fusion Cage Design Using Integrated Global Layout and Local Microstructure Topology Optimization. Spine 29 1747-1754.
89. L.C. Lin, H.H. Chen and S.P. Sun (2003) A Biomechanical Study of the Cortex-anchorage Vertebral Screw. Clin. Biomech. (Bristol, Avon) 18 S25-S32.
90. Y. Liu and G. Ray (1973) A Finite Element Analysis of Wave Propagation in the Human Spine. Technical Report F33615-72-C-1212 Fairborn, OH: Wright Patterson A.F.B.
91. J.C. Lotz, O.K. Colliou, et al. (1998) Compression-induced Degeneration of the Intervertebral Disc: An In Vivo Mouse Model and Finite-element Study. Spine 23 2493-2506.
92. Y.M. Lu, W.C. Hutton and V.M. Gharpuray (1996) Can Variations in Intervertebral Disc Height Affect the Mechanical Function of the Disc? Spine 21 2208-2216. discussion 2217
93. R.B. Martin and D.L. Boardman (1993) The Effects of Collagen Fiber Orientation, Porosity, Density, and Mineralization on Bovine Cortical Bone Bending Properties. J. Biomech. 26 1047-1054.
94. N. Maurel, F. Lavaste and W. Skalli (1997) A Three-dimensional Parameterized Finite Element Model of the Lower Cervical Spine: Study of the Influence of the Posterior Articular Facets. J. Biomech. 30 921-931.
95. G.E. Moore (1965) Cramming More Components onto Integrated Circuits. Electronics 38 114-117.
96. E.F. Morgan and T.M. Keaveny (2001) Dependence of Yield Strain of Human Trabecular Bone on Anatomic Site. J. Biomech. 34 569-577.
97. E.F. Morgan, H.H. Bayraktar and T.M. Keaveny (2003) Trabecular Bone Modulus-density Relationships Depend on Anatomic Site. J. Biomech. 36 897-904.
98. M. Moumene and F.H. Geisler (2004) Effect of Artificial Disc Placement on Facet Loading. Global Symposium on Intervertebral Disc Replacement & Non-fusion Technology Vienna, Austria
99. V.C. Mow and R. Huiskes (2005) Basic Orthopaedic Biomechanics and Mechano-biology Philadelphia, PA: Lippincott Williams & Wilkins
100. R.N. Natarajan and G.B. Andersson (1999) The Influence of Lumbar Disc Height and Cross-sectional Area on the Mechanical Response of the Disc to Physiologic Loading. Spine 24 1873-1881.
101. R.N. Natarajan, J.R. Williams and G.B. Andersson (2004) Recent Advances in Analytical Modeling of Lumbar Disc Degeneration. Spine 29 2733-2741.
102. R.N. Natarajan, G.B. Andersson, A.G. Patwardhan and S. Verma (2002) Effect of Annular Incision Type on the Change in Biomechanical Properties in a Herniated Lumbar Intervertebral Disc. J. Biomech. Eng. 124 229-236.
103. R.N. Natarajan, B.H. Chen, H.S. An and G.B. Andersson (2000) Anterior Cervical Fusion: A Finite Element Model Study on Motion Segment Stability Including the Effect of Osteoporosis. Spine 25 955-961.
104. R.N. Natarajan, R.B. Garretson, et al. (2003) Effects of Slip Severity and Loading Directions on the Stability of Isthmic Spondylolisthesis: A Finite Element Model Study. Spine 28 1103-1112.
105. H.W. Ng and E.C. Teo (2001) Nonlinear Finite-element Analysis of the Lower Cervical Spine (C4–C6) Under Axial Loading. J. Spinal Disord. 14 201-210.
106. H.W. Ng and E.C. Teo (2004) Probabilistic Design Analysis of the Influence of Material Property on the Human Cervical Spine. J. Spinal Disord. Tech. 17 123-133.
107. H.W. Ng and E.C. Teo (2005) Influence of Preload Magnitudes and Orientation Angles on the Cervical Biomechanics: A Finite Element Study. J. Spinal Disord. Tech. 18 72-79.
108. H.W. Ng, E.C. Teo and V.S. Lee (2004) Statistical Factorial Analysis on the Material Property Sensitivity of the Mechanical Responses of the C4–C6 Under Compression, Anterior and Posterior Shear. J. Biomech. 37 771-777.
109. H.W. Ng, E.C. Teo and Q. Zhang (2005) Influence of Cervical Disc Degeneration After Posterior Surgical Techniques in Combined Flexion-extension: A Nonlinear Analytical Study. J. Biomech. Eng. 127 186-192.
110. H.W. Ng, E.C. Teo, K.K. Lee and T.X. Qiu (2003) Finite Element Analysis of Cervical Spinal Instability Under Physiologic Loading. J. Spinal Disord. Tech. 16 55-65.
111. W.J.T. Palm, W.S. Rosenberg and T.M. Keaveny (2002) Load Transfer Mechanisms in Cylindrical Interbody Cage Constructs. Spine 27 2101-2107.
112. M.M. Panjabi, V.K. Goel and K. Takata (1982) Physiologic Strains in the Lumbar Spinal Ligaments: An In Vitro Biomechanical Study. Spine 7 192-203.
113. M.N. Panjabi, N.C. Chen, E.K. Shin and J.L. Wang (2001) The Cortical Shell Architecture of Human Cervical Vertebral Bodies. Spine 26 2478-2484.
114. S. Pankoke, J. Hofmann and H.P. Wolfel (2001) Determination of Vibration-related Spinal Loads by Numerical Simulation. Clin. Biomech. (Bristol, Avon) 16(Suppl. 1), S45-S56.
115. D. Perie, J. Sales De Gauzy, C. Baunin and M.C. Hobatho (2001) Tomodensitometry Measurements for In Vivo Quantification of Mechanical Properties of Scoliotic Vertebrae. Clin. Biomech. (Bristol, Avon) 16 373-379.
116. T. Pitzen, F.H. Geisler, et al. (2001) The Infleence of Cancellous Bone Density on Load Sharing in Human Lumbar Spine: A Comparison Between an Intact and a Surgically Altered Motion Segment. Eur. Spine J. 10 23-29.
117. A. Polikeit, L.P. Nolte and S.J. Ferguson (2003) The Effect of Cement Augmentation on the Load Transfer in an Osteoporotic Functional Spinal Unit: Finite-element Analysis. Spine 28 991-996.
118. A. Polikeit, L.P. Nolte and S.J. Ferguson (2004) Simulated Influence of Osteoporosis and Disc Degeneration on the Load Transfer in a Lumbar Functional Spinal Unit. J. Biomech. 37 1061-1069.
119. A. Polikeit, S.J. Ferguson, L.P. Nolte and T.E. Orr (2003) Factors Influencing Stresses in the Lumbar Spine After the Insertion of Intervertebral Cages: Finite Element Analysis. Eur. Spine J. 12 413-420.
120. A. Polikeit, S.J. Ferguson, L.P. Nolte and T.E. Orr (2003) The Importance of the Endplate for Interbody Cages in the Lumbar Spine. Eur. Spine J. 12 556-561.
121. L. Pothuaud, B. Van Rietbergen, et al. (2002) Combination of topological Parameters and Bone Volume Fraction Better Predicts the Mechanical Properties of Trabecular Bone. J. Biomech. 35 1091-1099.
122. G.J. Przybylski, P.R. Patel, G.J. Carlin and S.L. Woo (1998) Quantitative Anthropometry of the Subatlantal Cervical Longitudinal Ligaments. Spine 23 893-898.
123. C.M. Puttlitz, V.K. Goel, C.R. Clark and V.C. Traynelis (2000) Pathomechanisms of Failures of the Odontoid. Spine 25 2868-2876.
124. C.M. Puttlitz, V.K. Goel, et al. (2000) Biomechanical Rationale for the Pathology of Rheumatoid Arthritis in the Craniovertebral Junction. Spine 25 1607-1616.
125. T.X. Qiu, E.C. Teo, et al. (2003) Validation of T10–T11 Finite Element Model and Determination of Instantaneous Axes of Rotations in Three Anatomical Planes. Spine 28 2694-2699.
126. J.Y. Rho, M.C. Hobatho and R.B. Ashman (1995) Relations of Mechanical Properties to Density and CT Numbers in Human Bone. Med. Eng. Phys. 17 347-355.
127. J.C. Rice, S.C. Cowin and J.A. Bowman (1988) On the Dependence of the Elasticity and Strength of Cancellous Bone on Apparent Density. J. Biomech. 21 155-168.
128. A. Rohlmann, T. Zander and G. Bergmann (2005) Comparison of the Biomechanical Effects of Posterior and Anterior Spine-Stabilizing Implants. Eur. Spine J.
129. A. Rohlmann, T. Zander and G. Bergmann (2005) Effect of Total Disc Replacement with ProDisc on Intersegmental Rotation of the Lumbar Spine. Spine 30 738-743.
130. M.B. Schaffler and D.B. Burr (1988) Stiffness of Compact Bone: Effects of Porosity and Density. J. Biomech. 21 13-16.
131. H. Seidel, R. Bluthner and B. Hinz (2001) Application of Finite-element Models to Predict Forces Acting on the Lumbar Spine During Whole-body Vibration. Clin. Biomech. (Bristol, Avon) 16(Suppl. 1), S57-S63.
132. I. Sevostianov and M. Kachanov (2000) Impact of the Porous Microstructure on the Overall Elastic Properties of the Osteonal Cortical Bone. J. Biomech. 33 881-888.
133. A. Shirazi-Adl and M. Parnianpour (2000) Load-bearing and Stress Analysis of the Human Spine Under a Novel Wrapping Compression Loading. Clin. Biomech. (Bristol, Avon)_ 15 718-725.
134. A. Shirazi-Adl, M. El-Rich, D.G. Pop and M. Parnianpour (2004) Spinal Muscle Forces, Internal Loads and Stability in Standing Under Various Postures and Loads-application of Kinematics-based Algorithm. Eur. Spine J. 14(4), 381-392.
135. A. Shirazi-Adl, S. Sadouk, et al. (2002) Muscle Force Evaluation and the Role of Posture in Human Lumbar Spine Under Compression. Eur. Spine J. 11 519-526.
136. M.J. Silva, T.M. Keaveny and W.C. Hayes (1997) Load Sharing Between the Shell and Centrum in the Lumbar Vertebral Body. Spine 22 140-150.
137. M.J. Silva, T.M. Keaveny and W.C. Hayes (1998) Computed Tomography-based Finite Element Analysis Predicts Failure Loads and Fracture Patterns for Vertebral Sections. J. Orthop. Res. 16 300-308.
138. K. Sun and M.A. Liebschner (2004) Biomechanics of Prophylactic Vertebral Reinforcement. Spine 29 1428-1435. discussion 1435
139. A. Templeton, D. Cody and M. Liebschner (2004) Updating a 3-D Vertebral Body Finite Element Model Using 2-D Images. Med. Eng. Phys. 26 329-333.
140. A.F. Tencer, S. Mirza and K. Bensel (2002) Internal Loads in the Cervical Spine During Motor Vehicle Rear-end Impacts: The Effect of Acceleration and Head-to-head Restraint Proximity. Spine 27 34-42.
141. E.C. Teo and H.W. Ng (2001) Evaluation of the Role of Ligaments, Facets and Disc Nucleus in Lower Cervical Spine Under Compression and Sagittal Moments Using Finite Element Method. Med. Eng. Phys. 23 155-164.
142. E.C. Teo and H.W. Ng (2001) First Cervical Vertebra (Atlas) Fracture Mechanism Studies Using Finite Element Method. J. Biomech. 34 13-21.
143. E.C. Teo, K.K. Lee, et al. (2004) The Biomechanics of Lumbar Graded Facetectomy Under Anterior-shear Load. IEEE Trans. Biomed. Eng. 51 443-449.
144. E.C. Teo, K. Yang, et al. (2004) Effects of Cervical Cages on Load Distribution of Cancellous Core: A Finite Element Analysis. J. Spinal Disord. Tech. 17 226-231.
145. K. Totoribe, E. Chosa and N. Tajima (2004) A biomechanical Study of Lumbar Fusion Based on a Three-dimensional Nonlinear Finite Element Method. J. Spinal Disord. Tech. 17 147-153.
146. K. Totoribe, N. Tajima and E. Chosa (1999) A Biomechanical Study of Posterolateral Lumbar Fusion Using a Three-dimensional Nonlinear Finite Element Methods. J. Orthop. Sci. 4 115-126.
147. P. Tropiano, L. Thollon, et al. (2004) Using a Finite Element Model to Evaluate Human Injuries Application to the HUMOS Model in Whiplash Situation. Spine 29 1709-1716.
148. C.E. Tschirhart, A. Nagpurkar and C.M. Whyne (2004) Effects of Tumor Location Shape and Surface Serration on Burst Fracture Risk in the Metastatic Spine. J. Biomech. 37 653-660.
149. D. Ulrich, B. van Rietbergen, H. Weinans and P. Ruegsegger (1998) Finite Element Analysis of Trabecular Bone Structure: A Comparison of Image-based Meshing Techniques. J. Biomech. 31 1187-1192.
150. D.H.H.S.U.S.D.H.H.S. U.S. DHHS (U.S. Dept. of Health and Human Services) (2001) Guidance for Annuloplasty Rings 510(k) Submissions: Final Guidance for Industry and FDA Staff U.S. Dept. of Health and Human Services, Food and Drug Administration
151. U.S. DHHS (U.S. Dept. of Health and Human Services) (2003) Class II Special Controls Guidance Document: Knee Joint Patellofemorotibial and Femorotibial Metal/Polymer Porous-Coated Uncemented Prosthesis: Guidance for Industry and FDA U.S. Dept. of Health and Human Services, Food and Drug Administration
152. M.L. Villarraga, A.J. Bellezza, et al. (2005) The Biomechanical Effects of Kyphoplasty on Treated and Adjacent Nontreated Vertebral Bodies. J. Spinal Disord. Tech. 18 84-91.
153. J.L. Wang, M. Parnianpour, A. Shirazi-Adl and A.E. Engin (1998) The Dynamic Response of L(2)/L(3) Motion Segment in Cyclic Axial Compressive Loading. clin. Biomech. (Bristol, Avon) 13 S16-S25.
154. J.L. Wang, M. Parnianpour, A. Shirazi-Adl and A.E. Engin (2000) Viscoelastic Finiteelement Analysis of a Lumbar Motion Segment in Combined Compression and Sagittal Flexion: Effect of Loading Rate. Spine 25 310-318.
155. J.A. Weiss and J.C. Gardiner (2001) Computational Modeling of Ligament Mechanics. Crit Rev Biomed Eng 29 1-70.
156. J.A. Weiss, J.C. Gardiner, et al. (2005) Three-dimensional Finite Element Modeling of Ligaments: Technical Aspects. Med. Eng. Phys 27 895.
157. A.A. White and M.M. Panjabi (1990) Clinical Biomechanics of the Spine Philadelphia, PA: Lippincott Williams & Wilkins
158. C.M. Whyne, S.S. Hu and J. Lotz J.c. (2001) Parametric Finite Element Analysis of Vertebral Bodies Affected by Tumors. J. Biomech. 34 1317-1324.
159. C.M. Whyne, S.S. Hu and J.C. Lotz (2003) Biomechanically Derived Guideline Equations for burst Fracture Risk Prediction in the Metastatically Involved Spine. J. Spinal Disord. Tech. 16 180-185.
160. C.M. Whyne, S.S. Hu and J. Lotz J.c. (2003) Burst Fracture in the Metastatically Involved Spine: Development, Validation, and Parametric Analysis of a Threedimensional Poroelastic Finite-element Model. Spine 28 652-660.
161. C.M. Whyne, S.S. Hu, S. Klisch and J.C. Lotz (1998) Effect of the Pedicle and Posterior Arch on Vertebral Body Strength Predictions in Finite Element Modeling. Spine 23 899-907.
162. R.K. Wilcox, D.J. Allen, et al. (2004) A Dynamic Investigation of the Burst Fracture Process Using a Combined Experimental and Finite Element Approach. Eur. Spine J. 13 481-488.
163. R.K. Wilcox, T.O. Boerger, et al. (2003) A Dynamic Study of Thoracolumbar Burst Fractures. J. Bone Joint Surg. Am. 85-A 2184-2189.
164. H. Wilke, P. Neef, et al. (2001) Intradiscal Pressure Together with Anthropometric Data: A Data Set for the Validation of, Models. Clin. Biomech. (Bristol, Avon)_ 16(Suppl. 1), S111-S126.
165. J.M. Winters (1990) Hill-based Muscle Models: A Systems Engineering Perspective. J.M. Winters, S.L.-Y. Wu,(Eds) Multiple Muscle Systems: Biomechanics and Movement Organization New York: Springer-Verlag
166. J.S. Wu and J.H. Chen (1996) Clarification of the Mechanical Behaviour of Spinal Motion Segments Through a Three-dimensional Poroelastic Mixed Finite Element Model. Med. Eng. Phys. 18 215-224.
167. Y.N. Yeni, F.J. Hou, et al. (2003) Trabecular Shear Stresses Predict In Vivo Linear Microcrack Density But Not Diffuse Damage in Human Vertebral Cancellous Bone. Ann. Biomed. Eng. 31 726-732.
168. N. Yoganandan, S. Kumaresan and F.A. Pintar (2001) Biomechanics of the Cervical Spine. Part 2. Cervical Spine Soft Tissue Responses and Biomechanical Modeling. Clin. Biomech. (Bristol, Avon) 16 1-27.
169. N. Yoganandan, S. Kumaresan, L. Voo and F.A. Pintar (1996) Finite Element Applications in Human Cervical Spine Modeling. Spine 21 1824-1834.
170. N. Yoganandan, J.B. Myklebust, G. Ray and A. Sances (1987) Mathematical and Finite Element Analysis of Spine Injuries. CRC Crit Rev Biomed Eng 15 29-93.
171. N. Yoganandan, S.C. Kumaresan, et al. (1996) Finite Element Modeling of the C4–C6 Cervical Spine Unit. Med. Eng. Phys. 18 569-574.
172. T. Zander, A. Rohlmann and G. Bergmann (2004) Influence of Ligament Stiffness on the Mechanical Behavior of a Functional Spinal Unit. J. Biomech. 37 1107-1111.
173. T. Zander, A. Rohlmann, J. Calisse and G. Bergmann (2001) Estimation of Muscle Forces in the Lumbar Spine During Upper-body Inclination. Clin. Biomech. (Bristol, Avon) 16(Suppl. 1), S73-S80.
174. T. Zander, A. Rohlman, C. Klockner and G. Bergmann (2003) Influence of Graded Facetectomy and Laminectomy on Spinal Biomechanics. Eur. Spine J. 12 427-434.
175. Q.H. Zhang, S.H. Tan and S.M. Chou (2004) Investigation of Fixation Screw Pullout Strength on Human Spine. J. Biomech. 37 479-485.