Chapter 19 Scale-up of high-shear binder-agglomeration processes

Handbook of Powder Technology

Volumn 11, Issue , 2007, Pages 853-896

  Mort, Paul ^a  

^a PROCTER AND GAMBLE COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 51849100481     PISSN: 01673785     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0167-3785(07)80054-6     Document Type: Article

References (74)

1. Mort P. Powder Technol. 150 (2005) 86-103
2. Mort P., and Tardos G.I. Kona 17 (1999) 64-75
3. Mort P. Dimensional analysis of agglomeration: scale-up using transformations. Proceedings of the World Congress on Particle Technology Vol. 3 (1998)
4. Mort P., Capeci S., and Holder J. Powder Technol. 117 (2001) 173-176
5. Section 20. Ennis B.J., and Litster J.D. Size reduction and size enlargement. In: Green D. (Ed). Perry's Chemical Engineer's Handbook (1997), McGraw-Hill 56-89
6. Pietsch W. Agglomeration Processes: Phenomena, Technologies, Equipment (2002), Wiley-VCH, Weinheim
7. Sastry K.V.S., and Fuerstenau D.W. Powder Technol. 7 (1973) 97-105
8. Iveson S.M., Litster J.D., Hapgood K., and Ennis B.J. Powder Technol. 117 (2001) 3-39
9. Schaefer T., and Mathiesen C. Int. J. Pharm. 139 (1996) 125
10. Watano S., Sato Y., Miyanami K., and Murakami T. Chem. Pharm. Bull. 43 7 (1995) 1212-1220
11. Knight P.C., Instone T., Pearson J.M.K., and Hounslow M.J. Powder Technol. 97 (1998) 246-257
12. Newitt D.M., and Conway-Jones J.M. Trans. Inst. Chem. Eng. 36 (1958) 422-441
13. Kristensen H.G. Particle Agglomeration. In: Ganderton D., Jones T., and McGinty J. (Eds). Advances in Pharmaceutical Sciences (1995), Academic Press, London
14. Schaafsma S.H., Vonk P., Segers P., and Kossen N.W.F. Powder Technol. 97 (1998) 183-190
15. Schaefer T., and Mathiesen C. Int. J. Pharm. 139 (1996) 125-138
16. Litster J.D., Hapgood K.P., Michaels J.N., Sims A., Roberts M., and Kaminini S.K. Powder Technol. 124 (2002) 272-280
17. Hapgood K.P. Nucleation and Binder Dispersion in Wet Granulation. Ph.D. Thesis (2000), The University of Queensland
18. Schaafsma S.H., Vonk P., and Kossen N.W.F. Int. J. Pharm. 193 (2000) 175-187
19. Hapgood K.P., Litster J.D., White E.T., Mort P., and Jones D.G. Powder Technol. 141 (2004) 20-30
20. Ennis B.J., Tardos G.I., and Pfeffer R. Powder Technol. 65 (1991) 257-272
21. Mort P., and Riman R.E. Kona 12 (1994) 111-117
22. Ouchiyama N., and Tanaka T. I&EC Process Des. Dev. 14 (1975) 286-289
23. Kristensen H.G., Holm P., and Schaefer T. Powder Technol. 43 (1985) 225
24. Iveson S.M., Litster J.D., and Ennis B.J. Powder Technol. 88 (1996) 15
25. Iveson S.M., and Litster J.D. AIChE J. 44 7 (1998) 1510-1518
26. Iveson S.M., Page N.W., and Litster J.D. Powder Technol. 130 (2003) 97-101
27. Tardos G.I., Kahn M., and Mort P. Powder Technol. 94 (1997) 245-258
28. Rumpf H. The strength of granules and agglomerates. In: Knepper W.A. (Ed). AIME, Agglomeration (1962), Interscience, New York 379-418
29. Tardos G.I., Hapgood K.P., Ipadeola O.O., and Michaels J.N. Powder Technol. (2004) 217-227
30. Dries K.v.d., Vegt O.M.d., Girard V., and Vromans H. Powder Technol. 133 (2003) 228-236
31. Verkoeijen D., Meesters G.M.H., Vercoulen P.H.W., and Scarlett B. Powder Technol. 124 (2002) 195-200
32. Beekman W.J., Meesters G., Becker T., Gaertner A., Gebert M., and Scarlett B. Powder Technol. 130 (2003) 367-376
33. Samimi M., Ghadiri R., Boerefijn A., and Groot R. Powder Technol. 130 (2003) 428-435
34. Schaefer T., Holm P., and Kristensen H.G. Acta Pharm. Nord. 4 (1992)
35. Holm P., Schaefer T., and Kristensen H.G. Powder Technol. 43 (1985) 225-233
36. Kristensen H., and Schaefer T. Drug Dev. Ind. Pharm. 13 (1987) 803-872
37. Leuenberger H. Eur. J. Pharm. Biopharm. 52 (2001) 279-288
38. Faure, York P., and Rowe R.C. Eur. J. Pharm. Biopharm. 52 (2001) 269-277
39. Talu, Tardos G., and Ommen J.T.v. Powder Technol. 117 (2001) 149-162
40. Landin M., York P., Cliff M.J., Rowe R.C., and Wigmore A.J. Int. J. Pharm. 133 (1996) 127-131
41. Hancock, York P., and Rowe R.C. Int. J. Pharm. 83 (1992) 147-153
42. Delalone M., Baylac G., Bataille B., Jacob M., and Puech A. Int. J. Pharm. 130 (1996) 147-151
43. Betz G., Bürgin P.J., and Leuenberger H. Int. J. Pharm. 252 (2003) 11-25
44. Faure, Grimsey I.M., York P., Cliff M.J., and Rowe R.C. Mixer torque rheometry: relationships between wet mass consistency in pharmaceutical wet granulation processes and subsequent dry granule properties. Proceedings of the World Congress on Particle Technology 3 (1998)
45. Cliff M.J. Pharm. Tech. 4 (1990) 112-132
46. Holm P., Schaefer T., and Kristensen H. Powder Technol. 43 (1985) 213-223
47. Kristensen H.G. Powder Tech. 88 (1996) 197-202
48. Knight P.C. Powder Technol. 77 (1993) 159-169
49. Bardin M., Knight P.C., and Seville J.P.K. Powder Technol. 140 (2004) 169-175
50. Mackaplow M., Rosen L., and Michaels J. Powder Technol. 108 (2000) 32-45
51. Somerville-Roberts N., and Mort P. Product build-up in high-shear agglomeration systems. Proceedings of the AIChE Particle Technology Forum Topical Conference, Engineered Particle Systems: Synthesis, Processes & Applications (2003)
52. Adams M.J., and McKeown R. Powder Technol. 88 (1996) 155-163
53. Mort P. Analysis and application of powder compaction diagrams. In: Levy A., and Kalman H. (Eds). Handbook of Conveying and Handling of Particulate Solids (2001), Elsevier Science, Amsterdam
54. Naito M., Nakahira K., Hotta T., Ito A., Yokoyama T., and Kamiya H. Powder Technol. 95 (1998) 214-219
55. Iveson S.M., Beathe J.A., and Page N.W. Powder Technol. 127 (2002) 149-161
56. Schaefer T., Bak H.H., Jaegerskou A., Kristensen A., Svensson J.R., Holm P., and Kristensen H.G. Pharm. Ind. 49 (1987) 297-304
57. Forrest S., Bridgwater J., Mort P., Litster J., and Parker D. Powder Technol. 130 (2003) 91-96
58. Mort P. Intermediate powder flow - An industrial perspective. IFPRI Powder Flow Workshop, International Fine Powder Research Institute Annual Meeting. Bremen (2003)
59. Chapter 9. Tardos G.I., and Mort P. Dry Powder Flows. In: Crowe C. (Ed). Multiphase Flow Handbook (2006), CRC Press
60. Tardos G.I., McNamara S., and Talu I. Powder Technol. 131 (2003) 23-39
61. Jenike A.W. Storage and flow of solids. Bulletin No. 123, Utah Engineering Experiment Station Vol 53 No 26 (1964)
62. Nedderman R.M. Statics and Kinematics of Granular Materials (1992), Cambridge University Press, Cambridge, UK
63. Muguruma Y., Tanaka T., and Tsuji Y. Powder Technol. 109 (2000) 49-57
64. Plank R., Diehl B., Grinstead H., and Zega J. Powder Technol. 134 (2003) 223-234
65. Stewart R.L., Bridgwater J., and Parker D.J. Chem. Eng. Sci. 56 (2001) 4257-4271
66. Laurent B.F.C., and Bridgwater J. Chem. Eng. Sci. 57 (2002) 3781-3793
67. Litster J.D., Hapgood K.P., Michaels J.N., Sims A., Roberts M., Kameneni S.K., and Hsu T. Powder Technol. 114 (2001) 32-39
68. Mort P. A multi-scale approach to modeling and simulation of particle formation and handling processes. Proceedings of the 4th International Conference for Conveying and Handling of Particulate Solids (2003)
69. Tsujimoto H., Yokoyama T., Huang C.C., and Sekiguchi I. Powder Technol. 113 (2000) 88-96
70. Knight P. Powder Technol. 140 (2004) 156-162
71. Liu L.X., and Litster J.D. Chem. Eng. Sci. 57 (2002) 2183-2191
72. Wang F.Y., and Cameron I.T. Powder Technol. 124 (2002) 238-253
73. Iveson S.M. Powder Technol. 124 (2002) 219-229
74. Biggs A., Sanders C., Scott A.C., Willemse A.W., Hoffman A.C., Instone T., Salman A.D., and Hounslow M.J. Powder Technol. 130 (2003) 162-168