Comparison of a novel spray congealing procedure with emulsion-based methods for the micro-encapsulation of water-soluble drugs in low melting point triglycerides

Journal of Microencapsulation

Volumn 25, Issue 6, 2008, Pages 365-378

  McCarron, Paul A ^a   Donnelly, Ryan F ^a   Al Kassas, Rasil ^a  

^a QUEEN'S UNIVERSITY BELFAST   (United Kingdom)

Author keywords

Lidocaine; Lipid; Microparticle; Tetracycline; Witepsol

Indexed keywords

LIDOCAINE; TETRACYCLINE; TRIACYLGLYCEROL; WITEPSOL;

ARTICLE; CONTROLLED STUDY; DIFFUSION; DRUG FORMULATION; DRUG RELEASE; EMULSION; HYDROPHILICITY; INTERMETHOD COMPARISON; MELTING POINT; MICROENCAPSULATION; PARTICLE SIZE; TEMPERATURE DEPENDENCE;

ADMINISTRATION, CUTANEOUS; DRUG COMPOUNDING; DRUG DELIVERY SYSTEMS; DRUG DESIGN; EMULSIONS; EQUIPMENT DESIGN; HUMANS; LIDOCAINE; PARTICLE SIZE; SKIN; SOLUBILITY; TETRACYCLINE; TRIGLYCERIDES; WATER;

EID: 49049095092     PISSN: 02652048     EISSN: 14645246     Source Type: Journal    
DOI: 10.1080/02652040802000656     Document Type: Article

References (35)

1. Albertini, B., Passerini, N., Gonzalez-Rodriguez, ML, Perissutti, B. and Rodriguez, L. (2004) Effect of Aerosil (R) on the properties of lipid controlled release microparticles. J Control Rel, 100, pp. 233-246.
2. Al-Maaieh, A. and Flanagan, DR (2001) Salt and cosolvent effects on ionic drug loading into microspheres using an O/W method. J Control Rel, 70, pp. 169-181.
3. Al-Maaieh, A. and Flanagan, DR (2005) New drug salt formation in biodegradable microspheres. Int J Pharm, 303, pp. 153-159.
4. Benichou, A., Aserin, A. and Garti, N. (2004) Double emulsions stabilized with hybrids of natural polymers for entrapment and slow release of active matters. Adv Colloid Interface Sci, 108, pp. 29-41.
5. Bittner, B., Morlock, M., Koll, H., Winter, G. and Kissel, T. (1998) Recombinant human erythropoietin (rhEPO) loaded poly(lactide-co-glycolide) microspheres: Influence of the encapsulation technique and polymer purity on microsphere characteristics. Eur J Pharm Biopharm, 45, pp. 295-305.
6. Bodmeier, R. and McGinity, JW (1987) The preparation and evaluation of drug-containing poly(DL-lactide) microspheres formed by the solvent evaporation method. Pharm Res, 4, pp. 465-471.
7. Bodmeier, R. and McGinity, JW (1987) Polylactic acid microspheres containing quinidine base and quinidine sulphate prepared by the solvent evaporation technique. II. Some process parameters influencing the preparation and properties of microspheres. J Microencapsulation, 4, pp. 289-297.
8. Bodmeier, R. and McGinity, JW (1988) Solvent selection in the preparation of poly(-lactide) microspheres prepared by the solvent evaporation method. Int J Pharm, 43, pp. 179-186.
9. Bodmeier, R. and Paeratakul, O. (1994) The distribution of plasticizers between aqueous and polymer phases in aqueous colloidal polymer dispersions. Int J Pharm, 103, pp. 47-54.
10. Comoglu, T., Gonul, N. and Baykara, T. (2003) Preparation and in vitro evaluation of modified release ketoprofen microsponges. Farmaco, 58, pp. 101-106.
11. Cusimano, AG and Becker, CH (1968) Spray-congealed fomulations of sulfaethylthiadiazole (SETD) and waxes for prolonged-release medication. Effect of wax. J Pharm Sci, 57, pp. 1104-1112.
12. Delie, F., Berton, M., Allemann, E. and Gurny, R. (2001) Comparison of two methods of encapsulation of an oligonucleotide into poly(D,L-lactic acid) particles. Int J Pharm, 214, pp. 25-30.
13. Freytag, T., Dashevsky, A., Tillman, L., Hardee, GE and Bodmeier, R. (2000) Improvement of the encapsulation efficiency of oligonucleotide-containing biodegradable microspheres. J Control Rel, 69, pp. 197-207.
14. Giunchedi, P. and Conte, U. (1995) Spray-drying as a preparation method of microparticulate drug-delivery systems - an overview. STP Pharma Sci, 5, pp. 276-290.
15. Hayashi, T., Kanbe, H., Okada, M., Suzuki, M., Ikeda, Y., Onuki, Y., Kaneko, T. and Sonobe, T. (2005) Formulation study and drug release mechanism of a new theophylline sustained-release preparation. Int J Pharm, 304, pp. 91-101.
16. Herrmann, J. and Bodmeier, R. (1995) The effect of particle microstructure on the somatostatin release from poly(lactide) microspheres prepared by a w/o solvent evaporation method. J Control Rel, 36, pp. 63-71.
17. Jain, RA (2000) The manufacturing techniques of various drug loaded biodegradable poly(lactide-co-glycolide) (PLGA) devices. Biomaterials, 21, pp. 2475-2490.
18. Kilicarslan, M. and Baykara, T. (2003) The effect of the drug/polymer ratio on the properties of the verapamil HCl loaded microspheres. Int J Pharm, 252, pp. 99-109.
19. Kim, TH, Lee, H. and Park, TG (2002) Pegylated recombinant human epidermal growth factor (rhEGF) for sustained release from biodegradable PLGA microspheres. Biomaterials, 23, pp. 2311-2317.
20. Martin, A., Swarbrick, J. and Cammarata, A. (1983) Physical pharmacy., Lea & Febiger, Philadelphia
21. Meng, FT, Ma, GH, Qiu, W. and Su, ZG (2003) W/O/W double emulsion technique using ethyl acetate as organic solvent: Effects of its diffusion rate on the characteristics of microparticles. J Control Rel, 91, pp. 407-416.
22. Oster, CG and Kissel, T. (2005) Comparative study of DNA encapsulation into PLGA microparticles using modified double emulsion methods and spray drying techniques. J Microencapsulation, 22, pp. 235-244.
23. Passerini, N., Perissutti, B., Albertini, B., Voinovich, D., Moneghini, M. and Rodriguez, L. (2003) Controlled release of verapamil hydrochloride from waxy microparticles prepared by spray congealing. J Control Rel, 88, pp. 263-275.
24. Peppas, NA (1985) Analysis of Fickian and non-Fickian drug release from polymers. Pharm Acta Helv, 60, pp. 110-111.
25. Robson, HJ, Craig, DQ and Deutsch, D. (1999) An investigation into the release of cefuroxime axetil from taste-masked stearic acid microspheres. Part 1: The influence of the dissolution medium on the drug release profile and the physical integrity of the microspheres. Int J Pharm, 190, pp. 183-192.
26. Rodriguez, L., Passerini, N., Cavallari, C., Cini, M., Sancin, P. and Fini, A. (1999) Description and preliminary evaluation of a new ultrasonic atomizer for spray-congealing processes. Int J Pharm, 183, pp. 133-143.
27. Saers, ES, Nystrom, C. and Alden, M. (1993) Physicochemical aspects of drug release16. The effect of storage on drug dissolution from solid dispersions and the influence of cooling rate and incorporation of surfactant. Int J Pharm, 90, pp. 105-118.
28. Savolainen, M., Herder, J., Khoo, C., Lovqvist, K., Dahlqvist, C., Glad, H. and Juppo, AM (2003) Evaluation of polar lipid-hydrophilic polymer microparticles. Int J Pharm, 262, pp. 47-62.
29. Savolainen, M., Khoo, C., Glad, H., Dahlqvist, C. and Juppo, AM (2002) Evaluation of controlled-release polar lipid microparticles. Int J Pharm, 244, pp. 151-161.
30. Seki, T., Kawaguchi, T., Endoh, H., Ishikawa, K., Juni, K. and Nakano, M. (1990) Controlled release of 3′,5′-diester prodrugs of 5-fluoro-2′-deoxyuridine from poly-L-lactic acid microspheres. J Pharm Sci, 79, pp. 985-987.
31. Sendil, D., Gursel, I., Wise, DL and Hasirci, V. (1999) Antibiotic release from biodegradable PHBV microparticles. J Control Rel, 59, pp. 207-217.
32. Wang, J., Chua, KM and Wang, CH (2004) Stabilization and encapsulation of human immunoglobulin G into biodegradable microspheres. J Colloid Interface Sci, 271, pp. 92-101.
33. Wieland-Berghausen, S., Schote, U., Frey, M. and Schmidt, F. (2002) Comparison of microencapsulation techniques for the water-soluble drugs nitenpyram and clomipramine HCl. J Control Rel, 85, pp. 35-43.
34. Xiao, XC, Chu, LY, Chen, WM and Zhu, JH (2005) Monodispersed thermoresponsive hydrogel microspheres with a volume phase transition driven by hydrogen bonding. Polymer, 46, pp. 3199-3209.
35. Yeh, MK, Chen, JL and Chiang, CH (2004) In vivo and in vitro characteristics for insulin-loaded PLA microparticles prepared by w/o/w solvent evaporation method with electrolytes in the continuous phase. J Microencapsulation, 21, pp. 719-728.