Porous hydroxyapatite-based obturation materials for dentistry

Journal of Materials Research

Volumn 23, Issue 6, 2008, Pages 1587-1596

  Brostow, Witold ^a   Estevez, Miriam ^b   Hagg Lobland, Haley E ^a   Hoang, Ly ^a   Rodriguez, J Rogelio ^b,c   Vargar, Susana ^b  

^a UNIVERSITY OF NORTH TEXAS   (United States)

^b CENTRO DE FÍSICA APLICADA Y TECNOLOGÍA AVANZADA   (Mexico)

^c DEPARTAMENTO DE FÍSICA   (Mexico)

Author keywords

[No Author keywords available]

Indexed keywords

ABRASION; APATITE; BIOLOGICAL MATERIALS; BIOMATERIALS; DENTISTRY; HEALTH; HYDROXYAPATITE; IMAGING TECHNIQUES; MATERIALS TESTING; MECHANICAL TESTING; ORE TREATMENT; PAINTING; POLYMERS; STRESSES; TRIBOLOGY;

ABRASION RESISTANCE; ALUMINA PARTICLES; DENTAL CAVITIES; HYDROXYAPATITE (HAP); INTERCONNECTED PORES; MATERIALS RESEARCH SOCIETY (MRS); PARTICLE DIAMETERS; PORE VOLUME FRACTIONS; POROUS BIOMATERIALS; POROUS HYDROXYAPATITE (HAP); POROUS STRUCTURES; SEMI-RIGID; SLIDING WEAR; STAINING TESTS; X RAY DIFFRACTION (XRD);

HYBRID MATERIALS;

EID: 47549100700     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2008.0191     Document Type: Article

References (58)

1. D. Stojanovic, B. Jokic, Dj. Veljovic, R. Petrovic, P.S. Uskokovic, and Dj. Janackovic: Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition. J. Eur. Ceram. Soc. 27, 1595 (2007).
2. C. Balázsi, F. Wéber, Z. Kövér, E. Horváth, and C. Németh: Preparation of calcium-phosphate bioceramics from natural resources. J. Eur. Ceram. Soc. 27, 1601 (2007).
3. J.M. Anderson and J.J. Langone: Issues and perspectives on the biocompatibility and immunotoxicity evaluation of implanted controlled release systems. J. Control. Release 57, 107 (1999).
4. M. Tanahashi, T. Yao, T. Kokubo, M. Minoda, T. Miyamoto, T. Nakamura, and T. Yamamuro: Apatite coated on organic polymers by biomimetic process improvement in its adhesion to substrate by NaOH treatment. J. Appl. Biomater. 5, 339 (1994).
5. P.N. de Aza, F. Guitián, and S. de Aza: A new bioactive material which transforms in situ into hydroxyapatite. Acta Mater. 46, 2541 (1998).
6. Y. Shikinami and M. Okuno: Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly-L-lactide (PLLA): Part I. Basic characteristics. Biomaterials 20, 859 (1999).
7. M.E. Thomas, P.W. Richter, T. van Deventer, J. Crooks, and U. Ripamonti: Macroporous synthetic hydroxyapatite bioceramics for bone substitute applications. S. Afr. J. Sci. 95, 359 (1999).
8. R. Schilke, J.A. Lisson, O. Baub, and W. Geurtsen: Comparison of the number and diameter of dentinal tubules in human and bovine dentine by scanning electron microscopic investigation. Arch. Oral Biol. 45(5), 355 (2000).
9. R.S. Manly, H.C. Hodge, and L.E. Ange: Density and refractive index studies of dental hard tissues: II. Density distribution curves. J. Dent. Res. 15, 203 (1939).
10. S.A. Patterson: In vivo and in vitro studies of the effect of disodium salt of ethylenediamine tetra-acetate on human dentine and its endodontic implications. Oral Surg. 16(1), 83 (1987).
11. D.H. Pashley: Dentin-predentin complex and its permeability: Physiology overview. J. Dent. Res. 64, 613 (1985).
12. L.B. Goldman, M. Goldman, J.H. Kronman, and P.S. Lin: The efficacy of several irrigations solutions for endodontics: A scanning electron microscopy study. Oral Surg. 52(2), 197 (1985).
13. A. Cosijns, C. Vervaet, J. Luyten, S. Mullens, F. Siepmann, L. Van Hoorebeke, B. Masschaele, V. Cnudde, and J.P. Remon: Porous hydroxyapatite tablets as carriers for low-dosed drugs. Eur. J. Pharmacol. Biopharmacol. 67(2), 498 (2007).
14. D. Gupta, S. Chandra, and S. Chandra: Effect of the smeared layer upon dentinal tubule penetration by root canal sealers: A SEM study. Endodontology 8(1), 26 (1996).
15. S. Teng, L. Chen, Y. Guo, and J. Shi: Formation of nanohydroxyapatite in gelatin droplets and the resulting porous composite microspheres. J. Inorg. Biochem. 101, 686 (2007).
16. J.F. Piecuch: Long-term evaluation of the use of coralline hydroxyapatite in orthognathic surgery. J. Oral Maxillofac. Surg. 56, 941 (1998).
17. N. Ozgür Engin and A. Cüney Tas: Manufacture of macroporous calcium hydroxyapatite bioceramics. J. Eur. Ceram. Soc. 19, 2569 (1999).
18. L.K.A. Rodriguez, M.N. dos Santos, D. Pereira, A.V. Assaf, and V. Pardi: Carbon dioxide laser in dental caries prevention. J. Dent. 32, 531 (2004).
19. H.J. Lee, S.E. Kim, H.W. Choi, C.W. Kim, K.J. Kim, and S.C. Lee: The effect of surface-modified nano-hydroxyapatite on biocompatibility of poly (E-caprolactone)/hydroxyapatite nanocomposites. Eur. Polym. J. 43, 1602 (2007).
20. P.S. Uskokovic, C.Y. Tang, C.P. Tsui, N. Ignjatovic, and D.P. Uskokovic: Micromechanical properties of a hydroxyapatite/poly-L-lactide biocomposite using nanoindentation and modulus mapping. J. Eur. Ceram. Soc. 27, 1559 (2007).
21. J.P. Paul: Strength requirements for internal and external prostheses. J. Biomech. 32, 381 (1999).
22. M. Spector: Historical review of porous-coated implants. J. Arthroplasty 2, 163 (1987).
23. P.H.F. Caria, E.Y. Kawachi, C.A. Bertran, and J.A. Camilli: Biological assessment of porous-implant hydroxyapatite combines with periosteal grafting in maxillary defects. J. Oral Maxillofac. Surg. 65, 847 (2007).
24. M. Rabello: Putting Additives into Polymers (Artliber, Sao Paulo 2000), Chap. 10.
25. L.H. He and M.V. Swain: Enamel: A "metallic4ike" deformable biocomposite. J. Dent. 35, 431 (2007).
26. C-L. Lin, S-H. Chang, J-C. Wang, and W-J. Chang: Mechanical interactions of an implant/tooth-supported system under different periodontal supports and number of splinted teeth with rigid and non-rigid connections. J. Dent. 34, 682 (2006).
27. B. Fischman: The rotational aspect of mandibular flexure. J. Prosth. Dent. 64, 483 (1990).
28. A. de la Isla, W. Brostow, B. Bujard, M. Estevez, J.R. Rodriguez, S. Vargas, and V.M. Castaño: Nanohybrid scratch resistant coatings for teeth and bone viscoelasticity manifested in tribology. Mater. Res. Innovat. 7(2), 110 (2003).
29. M. Estevez, S. Vargas, H.E. Hagg Lobland, A. de la Isla, W. Brostow, and J. Rogelio Rodriguez: Characterization of novel dental obturation materials. Mater. Res. Innovat. 10(4), 411 (2006).
30. V.M. Castaño and R. Rodriguez: Polymer-based hybrid organic-inorganic materials, in Performance of Plastics, edited by W. Brostow (Hanser, Munich, 2000), Chap. 24.
31. M. Deng and S.W. Shalaby: Polymers as biomaterials, in Performance of Plastics, edited by W. Brostow (Hanser, Munich, 2000), Chap. 23.
32. C. Hengtrakool, G.J. Pearson, and M. Wilson: Interaction between GIC and S Sanguis biofilms: Antibacterial properties and changes of surfaces hardness. J. Dent. 34, 588 (2006).
33. T.J. Griffin and W.S. Cheung: The use of short, wide implants in posterior areas with reduced bone height: A retrospective investigation. J. Prosth. Dent. 92, 139 (2004).
34. J.W. Freudenthaler, G.K. Tischler, and C.J. Burstone: Bond strength of fiber-reinforced composite bars for orthodontic attachment. Am. J. Orthod. Dentofacial Orthop. 120, 648 (2001).
35. F. Tancret, J-M. Bouler, J. Chamousset, and L-M. Minois: Modelling the mechanical properties of microporous and macroporous biphasic calcium phosphate bioceramics. J. Eur. Ceram. Soc. 26, 3647 (2006).
36. C.E. Aragon and R.N. Bohay: The application of alveolar distraction osteogenesis following nonresorbable hydroxyapatite grafting in the anterior maxilla: A clinical report. J. Prosth. Dent. 93, 518 (2005).
37. R.P. Wool: Interfaces and adhesion, in Performance of Plastics, edited by W. Brostow (Hanser, Munich, 2000), Chap. 15.
38. R. Mülhaupt: Toughened thermoplastics and thermosets, in Performance of Plastics, edited by W. Brostow (Hanser, Munich, 2000), Chap. 20.
39. Z. Roslaniec, G. Broza, and K. Schulte: Nanocomposites based on multiblock polyester elastomers (PEEs) and carbon nanotubes (CNTs). Compos. Interfaces 10, 95 (2003).
40. A. Bismarck, M. Hofmeier, and G. Dörner: Effect of hot water immersion on the performance of carbon reinforced unidirectional poly(ether ether ketone) (PEEK) composites: Stress rupture under end-loaded bending. Composites A 38, 407 (2007).
41. A. Kopczynska and G.W. Ehrenstein: Polymeric surfaces and their true surface tension in solids and melts. J. Mater. Ed. 29, 325 (2007).
42. W. Brostow, J.V. Duffy, G.F. Lee, and K. Madejczyk: Parameters of equation of state of polyurethanes from acoustic resonance and isobaric expansivity. Macromolecules 24, 479 (1991).
43. E.B. Mano: Polymers as Engineering Materials (Edgard Blücher, São Paulo, 1996).
44. L.G. Griffith: Polymeric biomaterials. Acta Mater. 48, 263 (2000).
45. W. Brostow, B. Bujard, P.E. Cassidy, H.E. Hagg, and P.E. Montemartini: Effects of fluoropolymer addition to an epoxy on scratch depth and recovery. Mater. Res. Innovat. 6, 7 (2001).
46. W. Brostow, J-L. Deborde, M. Jaklewicz, and P. Olszynski: Tribology with emphasis on polymers: Friction, scratch resistance and wear. J. Mater. Ed. 25, 119 (2003).
47. W. Brostow and M. Jaklewicz: Tribology of a polymeric molecular composite: Effects of magnetic field orientation. J. Mater. Res. 19, 1038 (2004).
48. M. Estevez, S. Vargas, V.M. Castaño, J.R. Rodriguez, H.E. Hagg Lobland, and W. Brostow: Novel wear resistant and low toxicity dental obturation materials. Mater. Lett. 61, 3025 (2007).
49. W. Brostow, W. Chonkaew, L. Rapoport, Y. Soifer, and A. Verdyan: Grooves in microscratch testing. J. Mater. Res. 22, 2483 (2007).
50. W. Brostow, G. Damarla, J. Howe, and D. Pietkiewicz: Determination of wear of surfaces by scratch testing, e-Polymers 025, 1 (2004).
51. M.D. Bermudez, W. Brostow, F.J. Carrion-Vilches, J.J. Cervantes, and D. Pietkiewicz: Wear of thermoplastics determined by multiple scratching, e-Polymers 005, 1 (2005).
52. W. Brostow, H.E. Hagg Lobland, and M. Narkis: Sliding wear, viscoelasticicity, and brittleness of polymers. J. Mater. Res. 21, 2422 (2006).
53. L. Vujosevic and K. Obradovic-Durici: Porosity of hard dental tissues. Stomatol. Glasnik Serb. 36(2), 95 (1989).
54. W. Brostow, A.M. Cunha, J. Quintanilla, and R. Simões: Predicting cracking phenomena in molecular dynamics simulations of polymer liquid crystals. Macromol. Theory Simul. 11, 308 (2002).
55. W. Brostow and R. Simões: Tribological and mechanical behavior of polymers simulated by molecular dynamics. J. Mater. Ed. 27, 19 (2005).
56. E. Rivera-Muñoz, R. Velázquez, and R. Rodríguez: Improvement in mechanical properties of hydroxyapatite objects with controlled, porosity made by modified gelcasting process. Mater. Sci. Forum 426-432, 4489 (2003); on line at http://www. scientific.net.
57. L.F. Giraldo, W. Brostow, E. Devaux, B.L. Lopez, and L.D. Perez: Scratch and wear resistance of polyamide 6 reinforced with multiwall carbon nanotubes. J. Nanosci. Nanotechnol. 8, (2008, in press).
58. E.M. Rivera, M. Araiza, W. Brostow, V.M. Castaño, J.R. Diaz-Estrada, R. Hernández, and J.R. Rodríguez: Synthesis of hydroxyapatite from eggshells. Mater. Lett. 41, 128 (1999).