Sliding wear, viscoelasticity, and brittleness of polymers

Journal of Materials Research

Volumn 21, Issue 9, 2006, Pages 2422-2428

  Brostow, Witold ^a   Hagg Lobland, Haley E ^a   Narkis, Moshe ^b,c  

^a UNIVERSITY OF NORTH TEXAS   (United States)

^b TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

^c SHENKAR COLLEGE OF ENGINEERING AND DESIGN   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

FREE VOLUME; SLIDING WEAR; STORAGE MODULUS;

BRITTLENESS; CHEMICAL ANALYSIS; EQUATIONS OF STATE; STRAIN HARDENING; VISCOELASTICITY; WEAR OF MATERIALS;

POLYSTYRENES;

EID: 33845613036     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2006.0300     Document Type: Article

References (43)

1. E. Rabinowicz: Friction and Wear of Materials, 2nd ed. (Wiley, New York, 1995).
2. W. Brostow, M. Keselman, I. Mironi-Harpaz, M. Narkis, and R. Peirce: Effects of carbon black on tribology of blends of poly(vinylidene fluoride) with irradiated and non-irradiated ultrahighmolecular-weight polyethylene. Polymer 46, 5058 (2005).
3. Y. Dzenis: Spinning continuous fibers for nanotechnology. Science 304, 1917 (2004).
4. G. Zambelli and L. Vincent, editors: Matériaux et Contacts: Une Approche Tribologique (Presses Polytechniques et Universitaires romandes, Lausanne, 1998).
5. H.J. Mathieu, E. Bergmann, and R. Gras: Analyse et Technologie des Surfaces: Couches Minces et Tribologie (Presses Polytechniques et Universitaires Romandes, Lausanne, 2003).
6. J. Sandler, M.S.P. Shaffer, Y-M. Lam, A.H. Windle, P. Werner, V. Altstädt, J. Nastalczyk, G. Broza, K. Schulte, and C-A. Keun: Carbon-nanofibre filled thermoplastic composites, in Making Functional Materials with Nanotubes, edited by P. Bernier, P. Ajayan, Y. Iwasa, and P. Nikolaev (Mater. Res. Soc. Symp. Proc. 706, Warrendale, PA, 2002), p. 105.
7. J. Sandler, P. Wemer, M.S.P. Shaffer, V. Demchuk, V. Altstädt, and A.H. Windle: Carbon-fibre reinforced poly(ether ether ketone) composites. Composites A 33, 1033 (2002).
8. P. Werner, V. Altstädt, R. Jaskulka, O. Jacobs, J.K.W. Sandler, M.S.P. Shaffer, and A.H. Windle: Tribological behaviour of carbon-nanofibre- reinforced poly(ether ether ketone). Wear 257, 1006 (2004).
9. A.Y. Goldman: Prediction of the Deformation Properties of Polymeric and Composite Materials (American Chemical Society, Washington, DC, 1994).
10. Physical Properties of Polymers Handbook, edited by J.E. Mark (American Institute of Physics Press, Woodbury, NY, 1995).
11. E.F. Lucas, B.G. Soares, and E. Monteiro: Caracterização de Polimeros (e-papers, Rio de Janeiro, 2001).
12. D.N. Robinson and W.K. Binienda: Optimal fiber orientation in creeping composite structures. J. Appl. Mech. 68, 213 (2001).
13. L. Kuguoglu, W.K. Binienda, and A. Hajjafar: Analytical modeling of imperfect bond between coated fibers and matrix material. Int. J. Fracture 123, 63 (2003).
14. D.N. Robinson and W.K. Binienda: A representation of anisotropic creep damage in fiber reinforced composites. J. Appl. Mech. 72, 484 (2005).
15. G. Song, P. Qiao, and W.K. Binienda: Active vibration damping of a composite beam using smart sensors and actuators. J. Aerosp. Eng. 15(3), 97 (2002).
16. W. Brostow, J-L. Deborde, M. Jaklewicz, and P. Olszynski: Tribology with emphasis on polymers: Friction, scratch resistance and wear. J. Mater. Ed. 24, 119 (2003).
17. W. Brostow, G. Damarla, J. Howe, and D. Pietkiewicz: Determination of wear of surfaces by scratch testing. e-Polymers, no. 025, 1-8 (2004).
18. W. Brostow and M. Jaklewicz: Friction and scratch resistance of polymer liquid crystals: Effects of magnetic field orientation. J. Mater. Res. 19, 1038 (2004).
19. W. Brostow, B. Bujard, P.E. Cassidy, H.E. Hagg, and P.E. Montemartini: Effects of fluoropolymer addition to an epoxy on scratch depth and recovery. Mater. Res. Innovations 6, 7-12 (2002).
20. K.P. Menard: Dynamic Mechanical Analysis - An Introduction (CRC Press, Boca Raton, FL, 1999).
21. K.P. Menard: Thermal transitions and their measurement, in Performance of Plastics, edited by W. Brostow (Hanser, Munich-Cincinnati, 2000), Chap. 8.
22. W. Brostow, N.A. D'Souza, J. Kubdt, and R. Maksimov: Creep and stress relaxation of a longitudinal polymer liquid crystal: Prediction of the temperature shift factor. J. Chem. Phys. 110, 9706 (1999).
23. Performance of Plastics, edited by W. Brostow, (Hanser, Munich-Cincinnati, 2000).
24. W. Brostow: Time-stress correspondence in viscoelastic materials: An equation for the stress and temperature shift factor. Mater. Res. Innovations 3, 347-351 (2000).
25. A.E. Akinay, W. Brostow, and R. Maksimov: Prediction of longterm service performance of polymeric materials from short-term tests: Creep and prediction of the stress shift for a longitudinal polymer liquid crystal. Polym. Eng. Sci. 41, 977 (2001).
26. A.E. Akinay and W. Brostow: Long-term service performance of polymeric materials from short-term tests: Prediction of the stress shift factor from a minimum of data. Polymer 42, 4527 (2001).
27. A.E. Akinay, W. Brostow, V.M. Castaño, R. Maksimov, and P. Olszynski: Time-temperature correspondence prediction of stress relaxation of polymeric materials from a minimum of data. Polymer 43, 3593 (2002).
28. P.J. Flory: Selected Works, Vol. 3 (Stanford University Press, CA, 1985).
29. B. Hartmann and M.A. Haque: An equation of state for polymer solids. J. Appl. Phys. 58, 2831 (1985).
30. P. Zoller and D. Walsh: Standard Pressure-Volume -Temperature Data for Polymers (Technomic, Lancaster, PA - Basel, 1995).
31. M.D. Bermudez, W. Brostow, F.J. Camon-Vilches, J.J. Cervantes, and D. Pietkiewicz. Wear of thermoplastics determined by multiple scratching. e-Polymers no. 001, 1-8 (2005).
32. M.D. Bermudez, W. Brostow, F.J. Carrion-Vilches, J.J. Cervantes, G. Damarla, and M.J. Perez. Scratch velocity and wear resistance. e-Polymers no. 003, 1-11 (2005).
33. S. Jose, S. Thomas, E. Lievana, and J. Karger-Kocsis: Morphology and mechanical properties of polyamide 12 blends with styrenc/ethylene- butylene/styrene rubbers with and without maleation. J. Appl. Polym. Sci. 95, 1376 (2005).
34. M. Sepe: Dynamic Mechanical Analysis for Plastics Engineering (Plastics Design Library, Norwich, NY, 1998).
35. C.H. Ho and T. Vu-Khanh: Physical aging and time-temperature behavior concerning fracture performance of polycarbonate. Theor. App. Fract. Mech. 41, 103 (2004).
36. J. Fiebig, M. Gahleitner, C. Paulik, and J. Wolfschwenger: Ageing of polypropylene: processes and consequences. Polym. Test. 18, 257 (1999).
37. K.V. Wilson, Jr., B.L. Smith, J.M. Macdonald, J.R. Schoonover, J.M. Castro, M.E. Smith, M.E. Cournoyer, R. Marx, and W.P. Steckle, Jr.: Physico-chemical degradation of thermally aged hypalon glove samples. Polym. Degrad. Stab. 84, 439 (2004).
38. I. Schwarz, M. Stranz, M. Bonnet, and J. Petermann: Changes of mechanical properties in cold-crystallized syndiotactic polypropylene during aging. Colloid Polym. Sci. 279, 506 (2001).
39. B.D. Fallon and N. Eiss, Jr.: Tribological evaluation of carbon fiber reinforced PEEK and PEI at elevated temperatures, in Friction and Wear Technology for Advanced Composite Materials, edited by P.K. Rohatgi (ASM International, Materials Park, OH, 1994) pp. 121-130.
40. W. Brostow, J.A. Hinze, and R. Simoes: Tribological behavior of polymer simulated by molecular dynamics. J. Mater. Res. 19, 851 (2004).
41. E. Werwa: Everything you've always wanted to know about what your students think they know but were afraid to ask. J. Mater. Ed. 22, 18 (2000).
42. H.E. Hagg Lobland: Strange matter: Student impressions of a museum exhibit by the Materials Research Society. J. Mater. Ed. 28, (to be published 2006).
43. R.M. Mayer: Design with Reinforced Plastics (The Design Council, London, 1993) p. iii.