High field superconducting solenoids via high temperature superconductors

IEEE Transactions on Applied Superconductivity

Volumn 18, Issue 2, 2008, Pages 70-81

  Schwartz, Justin ^a,b   Effio, Timothy ^b   Liu, Xiaotao ^b   Le, Quang V ^b   Mbaruku, Abdallah L ^b   Schneider Muntau, Hans J ^b   Shen, Tengming ^b   Song, Honghai ^b   Trociewitz, Ulf P ^b   Wang, Xiaorong ^a,b   Weijers, Hubertus W ^b  

^a IEEE

^b FLORIDA STATE UNIVERSITY   (United States)

Author keywords

High temperature superconductors; Nuclear magnetic resonance; Superconducting magnets; Superconducting materials; Superconducting tapes; Superconducting wires

Indexed keywords

HIGH TEMPERATURE SUPERCONDUCTORS; MAGNETIC MATERIALS; MAGNETISM; NIOBIUM; PIGMENTS; SOLENOIDS; SUPERCONDUCTIVITY;

(PL) PROPERTIES; HIGH FIELDS; HIGH TEMPERATURE (HT); SCIENTIFIC RESEARCHES; SUPERCONDUCTING SOLENOIDS;

ELECTRIC CONDUCTIVITY;

EID: 45149085540     PISSN: 10518223     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASC.2008.921363     Document Type: Conference Paper

References (82)

1. 6+d in magnetic fields up to 58 T," Phys. Rev. B, vol. 70, p. 224521, 2004.
2. ⊥7O solid-state NMR spectroscopy in a model peptide Gly-Gly-Gly at 19.6 T," J. Am. Chem. Soc., vol. 128, pp. 9847-9855, 2006.
3. 2," J. Magn. Magn. Mater., vol. 316, no. 2, p. e349, 2007.
4. H. Maeda, P. V. P. S. S. Sastry, U. P. Trociewitz, J. Schwartz, K. Ohya, M. Sato, W. P. Chen, K. Watanabe, and M. Motokawa, "Effect of magnetic field strength in melt-processing on texture development and critical current density of Bi-oxide superconductors," Physica C Supercond., vol. 386, pp. 115-121, 2003.
5. T. A. Houpt et al., "Behavioral effects on rats of high strength magnetic fields generated by a resistive electromagnet," Phys. and Behav., vol. 86, pp. 379-389, 2005.
6. S. A. Gourlay, G. Sabbi, F. Kircher, N. Martovetsky, and D. Ketchen, "Superconducting magnets and their applications," Proceedings of the IEEE, vol. 92, no. 10, pp. 1675-1687, Oct. 2004.
7. J. E. C. Williams, "Superconducting magnets and their applications," Proceedings of the IEEE, vol. 77, no. 8, pp. 1132-1142, Aug. 1989.
8. R. M. Scanlan, A. P. Malozemoff, and D. C. Larbalestier, "Super-conducting materials for large scale applications," Proceedings of the IEEE, vol. 92, no. 10, pp. 1639-1654, 2004.
9. M. D. Bird, "Resistive magnet technology for hybrid inserts," Supercond. Sci. Technol., vol. 17, pp. R19-R33, 2004.
10. C. A. S wenson et al., "Performance of 75 T prototype pulsed magnet," IEEE Trans. Appl. Supercond., vol. 16, no. 2, pp. 1650-1655, June 2006.
11. M. R. Vaghar, L. Li, Y. Eyssa, H. J. Schneider-Muntau, and R. Kratz, "Roads to 100 T pulsed magnets," IEEE Trans. Appl. Supercond., vol. 10, no. 1, pp. 507-509, March 2000.
12. J. R. Miller, "The NHMFL 45-T hybrid magnet system: Past, present, and future," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 1385-1390, June 2003.
13. W. D. Markiewicz et al., "900 MHz wide bore NMR spectrometer magnet at NHMFL," IEEE Trans. Appl. Supercond., vol. 10, no. 1, pp. 728-731, March 2000.
14. T. H. Sefzik et al., "Solid-state O-17 NMR in carbohydrates," Chem. Phys. Lett., vol. 434, pp. 312-315, 2007.
15. D. Luga, C. Morais, Z. Gan, D. Neuville, L. Cormier, and D. Massiot, "NMR heteronuclear correlation between quadrupolar nuclei in solids," J. Am. Chem. Soc., vol. 127, p. 11540, 2005.
16. A. Korepanova, J. D. Moore, H. B. Nguyen, Y. Hua, T. A. Cross, and F. Gao, "Expression of membrane proteins from Mycobacterium tuberculosis in Escherichia coli as fusions with maltose binding protein," Protein Expression and Purification, vol. 53, pp. 24-30, 2007.
17. U.S. National Research Council's Committee on Opportunities in High Magnetic Field Science, Opportunities in High Magnetic Field Science National Academies Press. Washington, D.C., 2005.
18. x superconducting insert magnet," Supercond. Sci. Technol., vol. 17, pp. 636-644, 2004.
19. D. Hazelton, SuperPower Inc., Private Communication Aug. 2007.
20. P. J. Lee, Applied Superconductiviity Center, National High Magnetic Field Laboratory, Florida State University [Online]. Available: http://www.magnet.fsu.edu/magnettechnology/research/asc/im-ages/ jcprog-06-112706col.png
21. 2 thin films," Nature, vol. 411, pp. 558-560, 2001.
22. V. Selvamanickam et al., "Recent progress in second-generation HTS conductor scale-up at SuperPower," IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 3231-3234, June 2007.
23. J. Jiang, Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University, Private Communication 2007.
24. K. R. Marken, Jr., H. P. Miao, M. Meinesz, B. Czabaj, and S. Hong, "Progress in Bi-2212 wires for high magnetic field applications," IEEE Trans. Appl. Supercond., vol. 16, no. 2, pp. 992-995, June 2006.
25. S. H. Wee, A. Goyal, J. Li, Y. L. Zuev, S. Cook, and L. Heatherly, "The incorporation of nanoscale columnar defects comprised of self-assembled BaZrO3 nanodots to improve the flux pinning and critical current density of NdBa2Cu3O7- δ films grown on RABiTS," Supercond. Sci. Technol., vol. 20, no. 8, pp. 789-793, Aug. 2007.
26. 7-d coated conductor," Appl. Phys. Lett., vol. 88, no. 21, p. 212508, 2006.
27. 7-x film containing a high density of insulating, vortex-pinning nanoprecipitates," Appl. Phys. Lett., vol. 90, p. 252502, 2007.
28. M. W. Rupien et al., "The development of second generation HTS wire at American Superconductor," IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 3379-3382, June 2007.
29. H. Miao et al., "High field insert coils from Bi-2212/Ag round wires," IEEE Trans. Appl. Supercond., vol. 17, no. 2, p. 2262, 2007.
30. x conductor using a split melt process for react-wind-sinter magnet fabrication," IEEE Trans. Appl. Supercond., vol. 18, no. 2, June 2008.
31. x/AgMg round wire," IEEE Trans. Appl. Supercond., vol. 18, no. 2, June 2008.
32. T. Koizumi et al., "Bi-2212 phase formation process in multifilamentary Bi-2212/Ag wires and tapes," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 2538-2541, 2005.
33. H. Kitaguchi et al., "Bi2Sr2CaCu2Ox/Ag multilayer tapes with Jc (4.2 K, 10 T) of 500,000 A/cm2 by using PAIR process," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 1794-1799, 1999.
34. T. Hasegawa et al., "HTS conductors for magnets," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 1136-1140, 2002.
35. H. W. Weijers, J. Schwartz, B. ten Haken, M. Dhalle, and H. H. J. ten Kate, "Effects of conductor anisotropy on the design of Bi-Sr-Ca-Cu-O sections of 25 T solenoids," Supercond. Sci. Technol., vol. 16, pp. 672-681, 2003.
36. H. W. Weijers, B. ten Haken, H. H. J. ten Kate, and J. Schwartz, "Field dependence of the critical current and its relation to the anisotropy of BSCCO conductors and coils," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 2558-2561, 2005.
37. R. M. Scanlan et al., "Fabrication and test results for Rutherford-type cables made from BSCCO strands," IEEE Trans. Appl. Supercond, vol. 9, no. 2, pp. 130-133, 1999.
38. D. R. Dietderich, E. Barzi, A. K. Ghosh, N. L. Liggins, and H. C. Higley, "Cable R&D for the LHC accelerator research program," IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 1481-1484, 2007.
39. H. W. Weijers, J. M. Yoo, B. ten Haken, and J. Schwartz, "Bi-Sr-Ca-Cu-O conductors and magnets at high stress-strain levels," Physica C Supercond., vol. 357-360, pp. 1160-1164, 2001.
40. H. W. Weijers, J. Schwartz, and B. ten Haken, "Bi-based HTS insert coils at high stress levels," Physica C Supercond., vol. 372-376, pp. 1364-1367, 2002.
41. x tapes and wires," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 1560-1563, 1997.
42. 8 tapes," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 1808-1811, 1999.
43. 8 tapes," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 1876-1879, 1999.
44. H. W. Weijers et al., "Development of 3 T class Bi-2212 insert coils for high field NMR," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 563-566, 1999.
45. H. W. Weijers et al., "Development and testing of a 3 T Bi-2212 insert magnet," in Adv. Cryogenic Engineering: Proc. Cryogenic Engr. Conf., 2000, vol. 45A, pp. 769-778.
46. H. W. Weijers et al., "Development of a 5 T HTS insert magnet as part of 25 T class magnets," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 1396-1399, 2003.
47. T. Hasegawa et al., "Fabrication and properties of Bi2Sr2CaCu2Oy multilayer superconducting tapes and coils," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 1703-1706, 1997.
48. T. C. Holesinger et al., "Isothermal melt processing of Bi-2212 tapes," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 1800-1803, 1999.
49. D. E. Wesolowski, M. O. Rikel, J. Jiang, S. Arsac, and E. E. Hellstrom, "Reactions between oxides and Ag-sheathed BiSrCaCuO conductor," Supercond. Sci. Technol., vol. 18, pp. 934-943, 2005.
50. U. P. Trociewitz, "Bi2212 conductor and coil technology for high field magnets," presented at the 20th International Conference on Magnet Technology, August 2007, unpublished.
51. c coils," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 1552-1555, 1997.
52. 8+x magnets," Supercond. Sci. Technol. Rapid Comm., vol. 20, pp. L59-L62, 2007.
53. D. C. van der Laan, H. J. N. van Eck, B. ten Haken, H. H. J. ten Kate, and J. Schwartz, "Strain effects in high temperature superconductors investigated with magneto-optical imaging," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 3534-3539, 2003.
54. A. L. Mbaruku, I. Rutel, U. P. Trociewitz, H. W. Weijers, and J. Schwartz, "Electro-mechanical behavior of YBCO coated conductor in tension," in Adv. Cryogenic Engineering: Proc. Int. Cryogenic Mater. Conf., 2004, vol. 50B, pp. 700-705.
55. A. L. Mbaruku and J. Schwartz, "Fatigue behavior of Y-Ba-Cu-O coated conductor at 77 K," IEEE Trans. Appl. Supercond., submitted for publication.
56. D. C. van der Laan, J. W. Ekin, C. C. Clickner, and T. C. Stauffer, "Delamination strength of YBCO coated conductors under transverse tensile stress," Supercond. Sci. Technol., vol. 20, no. 8, pp. 765-770, Aug. 2007.
57. D. C. van der Laan and J. W. Ekin, "Large intrinsic effect of axial strain on the critical current of high-temperature superconductors for electric power applications," Appl. Phys. Lett., vol. 90, p. 052506, 2006.
58. N. Cheggour, J. W. Ekin, and C. L. H. Thieme, "Magnetic-field dependence of the reversible axial-strain effect in Y-Ba-Cu-O coated conductors," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 3577-3580, 2005.
59. x/AgMg composite conductors," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 2038-2041, 1997.
60. Y. Viouchkov, H. W. Weijers, and J. Schwartz, "Stress-strain effects in Bi-2212 superconductors," IEEE Trans. Appl. Supercond., vol. 10, no. 1, pp. 1134-1137, 2000.
61. D. C. van der Laan, M. W. Davidson, B. ten Haken, H. H. J. ten Kate, and J. Schwartz, "Magneto-optical imaging study of the crack formation in superconducting tapes caused by applied strain," Physica C Supercond., vol. 372-376, pp. 1020-1023, 2002.
62. c for AgMg sheathed Bi-2212 tapes," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 3522-3525, 2003.
63. 8+x superconducting tapes using Weibull distributions," J. Appl. Phys., vol. 101, no. 7, p. 073913, 2007.
64. F. Trillaud, H. Palanki, U. P. Trociewitz, S. H. Thompson, H. W. Weijers, and J. Schwartz, "Normal zone propagation experiments on high temperature superconductor composite conductors," Cryogenics, vol. 43, no. 3-5, pp. 271-279, 2003.
65. J. Lue et al., "Quench tests of a 20-cm-long RABiTS YBCO tape," in Adv. Cryogenic Engineering: Proc. Int. Cryogenic Mater. Conf., 2004, vol. 48, pp. 321-328.
66. R. Duckworth et al., "Quench dynamics in silver coated YBCO tapes," in Adv. Cryogenic Engineering: Proc. Int. Cryogenic Mater. Conf., 2004, vol. 48, pp. 313-320.
67. R. Grabovickic, J. W. Lue, M. Gouge, J. A. Demko, and R. Duckworth, "Measurements of temperature dependence of the stability and quench propagation of a 20-cm-long RABiTS Y-Ba-Cu-O tape," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 1726-1730, 2003.
68. R. Duckworth, J. W. Lue, D. Lee, R. Grabovickic, and M. Gouge, "The role of nickel substrates in the quench dynamics of silver coated YBCO tapes," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 1768-1771, 2003.
69. 7-δ coated conductors initialized by localized, pulsed disturbances," in Adv. Cryogenic Engineering: Proc. Int. Cryogenic Mater. Conf., 2004, vol. 50B, pp. 852-859.
70. X. R. Wang, A. R. Caruso, M. Breschi, G. M. Zhang, U. P. Trociewitz, H. W. Weijers, and J. Schwartz, "Normal zone initiation and propagation in Y-Ba-Cu-O coated conductors with Cu stabilizer," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 2586-2589, 2005.
71. M. Breschi, P. L. Ribani, X. Wang, and J. Schwartz, "Theoretical explanation of non-equipotential quench behavior in Y-Ba-Cu-O coated conductors," Supercond. Sci. Technol. Rapid Comm., vol. 20, no. L9-L11, 2007.
72. 7-δ coated conductors," J. Appl. Phys., vol. 101, no. 5, p. 053904, 2007.
73. G. A. Levin, P. N. Barnes, and J. S. Bulmer, "Current sharing between superconducting film and normal metal," Supercond. Sci. Technol., vol. 20, no. 8, pp. 757-764, Aug. 2007.
74. G. A. Levin and P. N. Barnes, "The normal zone in YBa2Cu3O6+x-coated conductors," Supercond. Sci. Technol., vol. 20, no. 12, pp. 1101-1107, Dec. 2007.
75. A. Ishiyama et al., "Degradation of YBCO coated conductors due to over-current pulse," IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 3509-3512, June 2007.
76. x/AgX coil at 4.2 K," Supercond. Sci. Technol., vol. 21, p. 025015, January 2008.
77. x at 4.2 K," Supercond. Sci. Technol., to be published.
78. x round wires at 4.2 K," Supercond. Sci. Technol., submitted for publication.
79. T. Kiss et al., "Quench characteristics in HTSC devices," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 1073-1076, 1999.
80. W. S. Kim, F. Trillaud, I. C. Ang, S. Y. Hahn, and Y. Iwasa, "Normal zone propagation in YBCO winding pack models," IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 2478-2481, 2007.
81. F. Trillaud et al., "Protection and Quench detection of YBCO coils results with small test coil assemblies," IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 2450-2453, 2007.
82. A. L. Mbaruku, U. P. Trociewitz, X. R. Wang, and J. Schwartz, "Relationships between conductor damage, quenching and electromechanical behavior in YBCO coated conductors," IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 3044-3049, 2007.