Superconducting magnets and their applications

Proceedings of the IEEE

Volumn 92, Issue 10, 2004, Pages 1675-1687

  Gourlay, Stephen A ^a   Sabbi, Gianluca ^a   Kircher, François ^b   Martovetsky, Nicolai ^c   Ketchen, Don ^d  

^a LAWRENCE BERKELEY NATIONAL LABORATORY   (United States)

^b DIF   (France)

^c LAWRENCE LIVERMORE NATIONAL LABORATORY   (United States)

^d GENERAL ATOMICS   (United States)

Author keywords

Applications; Detectors; Fusion; High energy physics; Maglev; Superconducting magnets; Supercunductivity

Indexed keywords

APPLICATIONS; CRYOGENICS; CURRENT DENSITY; DETECTORS; ENERGY UTILIZATION; FUSION REACTIONS; HIGH ENERGY PHYSICS; HIGH TEMPERATURE SUPERCONDUCTORS; MAGNETIC FIELDS; SUPERCONDUCTIVITY;

ANTIPROTON BEAMS; HYDRON COLLIDERS; LOW-TEMPERATURE SUPERCONDUCTORS; MAGLEV;

SUPERCONDUCTING MAGNETS;

EID: 21344446521     PISSN: 00189219     EISSN: None     Source Type: Journal    
DOI: 10.1109/JPROC.2004.833675     Document Type: Conference Paper

References (54)

1. Proc. IEEE (Special issue on Superconductivity), vol. 77, pp. 1105-1312, Aug. 1989.
2. T. Kiyoshi, A. Sato, T. Takeuchi, K. Itoh, S. Matsumoto, O. Ozaki, K. Fukushima, H. Wada, M. Yoshikawa, T. Kamikado, S. Ito, T. Miki, T. Hase, M. Hamada, S. Hayashi, Y. Kawate, and R. Hirose, "Persistent-mode operation of a 920 MHz high-resolution NMR magnet," IEEE Trans. Appl. Supcrconduct., vol. 12, pp. 711-714, Mar. 2002.
3. W. D. Markiewicz, I. R. Dixon, C. A. Swenson, W. S. Marshall, T. A. Painter, S. T. Bole, T. Cosmus, M. Parizh, M. King, and G. Ciancetta, "900 MHz wide bore NMR spectrometer magnet at NHMFL," IEEE Trans. Appl. Superconduct., vol. 10, pp. 728-731, Mar. 2000.
4. W. D. Markiewicz, J. Schwartz, and H. J. Schneider-Muntau, "The approach to 1 GHz plus high resolution NMR," IEEE Trans. Appl. Superconduct., vol. 10, pp. 724-727, Mar. 2000.
5. x: superconducting insert magnet," Supercond. Sci. Technol., vol. 17, pp. 636-644, 2004.
6. H. T. Edwards, "The tevatron energy doubler: A superconducting accelerator," Annu. Rev. Nucl. Pan. Sci., vol. 35, pp. 605-660, 1985.
7. M. Wilson, "Superconducting magnets for accelerators: A review," IEEE Trans. Appl. Superconduct., vol. 7, pp. 727-732, June 1997.
8. A. Devred, "Review of superconducting dipole and quadrupole magnets for particle accelerators,", DAPNIA/STCM 98-07, 1998.
9. D. Larbalestier and P. Lee, "New developments in niobium titanium superconductors," in Proc. Particle Accelerator Conf. 1995, 1995, p. 1276.
10. "The Large Hadron Collider conceptual design," Eur. Org. Nuclear Res. (CERN), CERN Rep. AC/95-05 (LHC), 1995.
11. O. Bruning et al., "LHC luminosity and energy upgrade: A feasibility study," Eur. Organization Nuclear Research (CERN), CERN-LHC Rep. 626, 2002.
12. G. Dugan, P. Limon, and M. Syphers, "Really large Hadron collider working group summary," in 1997 DPF/DPB Summer Study on New Directions for High Energy Physics, 1996, p. 251.
13. P. Limon et al., "Design study for a staged Very Large Hadron Collider," Fermilab, TM-2149, June 2001.
14. M. Green and E. Willen, "Superconducting dipoles and quadrupoles for a 2 TeV muon collider," IEEE Trans. Appl. Superconduct., vol. 7, pp.743-746, June 1997.
15. G. Moritz el al., "Toward fast-pulsed superconducting synchrotron magnets," presented at the 2001 Particle Accelerator Conf., Chicago, IL.
16. R. Scanlan, "Conductor development for high-energy physics-Plans and status of the U.S. program," IEEE Trans. Appl. Superconduct., vol. 11, pp. 2150-2155, Mar. 2001.
17. W. Sampson, S. Kiss, K. Robins, and A. McInturff, "Nb3Sn dipole magnets," IEEE Trans. Magn., vol. 15, pp. 117-118, Jan. 1979.
18. J. Perot, "Construction and test of a synchrotron dipole model using Nb3Sn cable," IEEE Trans. Magn., vol. 19, pp. 1378-1380, May 1983.
19. 3Sn wound, in-situ reacted, high-field superconducting quadrupole of CERN," IEEE Trans. Magn., vol. 19, pp. 1410-1416, May 1983.
20. 3Sn dipole magnet reacted after winding," IEEE Trans. Magn., vol. 21, pp. 967-970, Mar. 1985.
21. 3Sn superconductors in high-field accelerator magnets," IEEE Trans. Appl. Superconduct., vol. 7, pp. 733-738, June 1997.
22. 3Sn dipole," in Particle Accelerator Conf. 1997, Vancouver, BC, 1997.
23. 3Sn superconducting racetrack dipole magnet," in Particle Accelerator Conf. 2001.
24. 3Sn dipole magnet," IEEE Trans. Appl. Supercond., vol. 14, pp. 345-348, June 2004.
25. R. Gupta, "A common coil design for high field 2-in-1 accelerator magnets," presented at the Particle Accelerator Conf. 1997, Vancouver, BC, Canada, May 1997.
26. 3Sn magnet R&D," IEEE Trans. Appl. Superconduct., vol. 12, pp. 236-241, Mar. 2002.
27. S. Caspi et al., "The use of pressurized bladders for stress control of superconducting magnets," IEEE Appl. Superconduct, vol. 11, pp. 2272-2275, Mar. 2001.
28. J. Strait et al., "Toward a new LHC interaction region design for a luminosity upgrade," presented at the Particle Accelerator Conf. 2003, Portland, OR.
29. M. Morpurgo, "The design of the superconducting magnet for the Omega project," Part. Accel., vol. 1, p. 255, 1971.
30. C. P. Parch et al., "The 1.4 m/2.2 T superconducting detector magnet pluto for the electron-position storage ring at DESY," in Proc. 4th Int. Conf. Magnet Technology, 1972, pp. 275-286.
31. H. Desportes et al., "Construction and test of the cello thin. Wall solenoid," Adv. Cryogenic Eng., vol. 25, pp. 175-184, 1980.
32. P. H. Eberhard et al., "A magnet system for the time projection chamber at PEP," IEEE Trans. Magn., vol. MAG-15, pp. 128-130, Jan. 1979.
33. A. Yamamoto et al., "A thin superconducting solenoid wound with the internal winding method for colliding beam experiment," J. Phys., vol. C1. pp. 337-340, 1984.
34. J. M. Baze et al., "Design, construction, and test of the large superconducting solenoid ALEPH," IEEE Trans. Magn., vol. MAG-24, pp. 1260-1263, Mar. 1988.
35. E. Baynham et al., "Toward the realization of two 1.2 Tesla superconducting solenoids for particle physics experiments," in Proc. 11th Int. Conf. Magnet Technology, 1989, pp. 206-211.
36. F. Wiggenstein et al., "Construction of the L3 magnet,"in Proc. 11th Int. Conf. Magnet Technology, 1989, pp. 130-135.
37. A. Yamamoto et al., "Development of a prototype thin supercon ducting solenoid magnet for the SDC detector," IEEE Trans. Appl. Superconduct., vol. 5. pp. 849-852, June 1995.
38. A. J. Street et al., "Final site assembly and testing of the superconducting toroidal magnet for the CEBAF large acceptance spectrometer (CLAS)," IEEE Trans. Mag., vol. 32, pp. 2074-2076, July 1996.
39. A. Yamamoto et al., "Progress in ATLAS central solenoid magnet," IEEE Trans. Appl. Superconduct., vol. 10, pp. 353-356, Mar. 2000.
40. A. Daël et al., "Synthesis of technological developments for the BO model coil and the ATLAS barrel toroid coils," IEEE Trans. Appl. Superconduct., vol. 10, pp. 361-364, Mar. 2000.
41. E. Bayham et al., "Engineering status of the superconducting end cap toroid magnets for the ATLAS experiment at LHC," IEEE Trans. Appl. Superconduct., vol. 10, pp. 357-360, Mar. 2000.
42. A. Hervé et al., "Status of the CMS magnet," IEEE Trans. Appl. Superconduct., vol. 12, p. 385, Mar. 2002.
43. T. Kozman, D. Shimer, J. VanSant, and J. Zbasnik, "Construction and testing of the mirror fusion test facility magnets," IEEE Trans. Magn., vol. MAG-23, p. 1448, Mar. 1987.
44. D. P. Ivanov, V. E. Keilin, B. A. Stavissky, and N. A. Chernoplekov, "First results of superconducting toroidal coil of tokamak T-7 testing," IEEE Trans. Mag., vol. MAG-15, pp. 550-553, Jan. 1979.
45. N. A. Chernoplekov, Ed., "Superconducting magnet systems for tokamaks" Russian Sci. Center Kurchatov Inst-, Moscow, Russia, 1997.
46. S. Itoh et al., "Initial operation of the high field superconducting tokamak TRIAM-1M," in Proc. 11th Int. Conf. Plasma Physics and Control Fusion, vol. 3, 1987, p. 321.
47. B. Turck, "TORE SUPRA: A tokamak with superconducting toroidal field coils-Status report after the first plasmas," IEEE Trans. Mag., vol. 25, p. 1473, Mar. 1989.
48. M. Kwon, J. Bak, and G. S. Lee, "Fusion science and technology," Progr. KSTAR Tokamak Eng., vol. 42, pp. 167-177, July 2002.
49. SST Team, "Conceptual design of SST-1 tokamak," in Proc. 16th Symp. Fusion Engineering (SOFE), vol. 1, 1996, p. 481.
50. R. Aymar and International Team, "TTER status, design and material objectives," J. Nucl. Mater., vol. 307-311, pp. 1-9, Dec. 2002.
51. Y. X. Wan, P. D. Weng, J. G. Li, Q. Q. Yu, and D. M. Gao. "HT-7U* superconducting tokamak: Physics design, engineering progress and schedule," presented at the 19th IAEA Fusion Energy Conf., Lyon, France, 2002.
52. A. Iiyyoshi, S. Imagawa, and LHD Group, "Design, construction and the first plasma experiments in the Large Helical Device," Fusion Eng. Des., vol. 46, pp. 323-335, Nov. 1999.
53. L. Wegener, L. Wegener, J.-H. Feist, J. Sapper, F. Kerl, and F. Werner, "Final design and construction of the Wendelstein 7-X coils," Fusion Eng. Des., vol. 58-59, pp. 225-230, Nov. 2001.
54. M. O. Hoenig and D. B. Montgomery, "Dense supercritical helium cooled superconductors for large high field stabilized magnets," IEEE Trans. Magn., vol. 11, pp. 569-572, Mar. 1975.