Bi2Sr2CaCu2Ox/Ag multilayer tapes with jc(4.2k, 10t) of 500,000 a/cm2 by using pair process

IEEE Transactions on Applied Superconductivity

Volumn 9, Issue 2 PART 2, 1999, Pages 1794-1799

  Kitaguchi, Hitoshi ^a  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; BISMUTH COMPOUNDS; CRITICAL CURRENT DENSITY (SUPERCONDUCTIVITY); CRYSTAL MICROSTRUCTURE; MULTILAYERS; ROLLING; SILVER; TAPES; TRANSPORT PROPERTIES;

GRAIN ALIGNMENT; INTERGRAIN CONNECTIVITY; MULTILAYER TAPES; OXIDE PAINTING; PREANNEALING AND INTERMEDIATE ROLLING PROCESS; SUPERCONDUCTING PROPERTIES; UNIFORMITY;

OXIDE SUPERCONDUCTORS;

EID: 0032637320     PISSN: 10518223     EISSN: None     Source Type: Journal    
DOI: 10.1109/77.784804     Document Type: Article

References (21)

1. Y. Yamada, M. Satou, M. Murase, T. Kitamura, and Y. Kamisada, Microstructure and superconducting properties of Ag sheathed (Bi, Pb)2Sr2Ca2CuA tapes, Adv. in Supercond., vol. V, pp. 717-720, 1993..
2. G. Grasso, B. Hensel, A. Jeremie, and R. Flukiger, Distribution of the transport critical current density in Ag sheathed (Bi, Pb)2Sr2Ca2Cu:,0, tapes produced by rolling, Physica C, vol. 241, pp. 45-52, 1995.
3. H. Miao, F. Lera, A. I.arrea, G. F. de la Fuente, and R. Navarro, Advances towards the rolling processing of long BSCCO tapes, IEEE Trans. Appl. Supercond, Vol. 7, pp. 1833-1836, 1997.
4. N. Tomita, M. Arai, E. Yanagisawa, T. Morimoto, H. Fujii, H. Kitaguchi, H. Kumakura, K. Inoue, K. Togano, H. Macda, and K.. Nomura, Generation of 21.5T by a superconducting magnet system using a Bi2Sr2CaCu2tyAg coil as an insert magnet, Appl. Phys. Lett., vol. 65. pp. 898-900, 1994.
5. M. Okada, K. Tanaka, K. Fukushima, J. Sato, and K. Higashiyama, Transport properties of Bi-2212/Ag multifilamentary composite tape in high magnetic fields, PhysicaB, vol. 216, pp. 248-251, 1996.
6. M. Mimura, T. Kinoshita, N. Uno, Y. Tanaka, and K. Uoi, Solenoid coil using multilayered composite wire of Bi-based superconductor, Adv. in Supercond., vol. V, pp. 693-696, 1993...
7. T. Hase, K. Shibutani, S. Hayashi, R. Ogawa, and Y. Kawate, Operation of Bi-2212 superconducting magnet with ruom temperature bore of 45 mm diameter at 20 K, Cryogenics, vol. 35, pp.127-133, 1995.
8. M. Yoshida, A. Ando, and N. Hara, Fabrication of two tesla magnet using Bi-2212 Ag-sheathed tapes, Jpn. J. Appl. Phys., vol. 33, pp. L421-L423, 1994.
9. J. Tenbrink and H. Krauth. Recent results on test windings and coils of Bi-2212/Ag wires, Adv. Cryogenic Engr., vol. 40, pp. 305-311, 1994.
10. J.W. Lue, S.W. Schwenterly, M.S. Lubell, J.N. Luton, M.U. Manlief, C.H. Joshi, E.R. Podtburg, and L.J. Masur, Test results of two small, high-temperature superconducting coils, Adv. Cryogenic Engr., vol. 40, pp. 327-334, 1994.
11. ) 1] K. R. Marken, W. Dai, L. Cowey, S. Ting, and S. Hong, Processing in BSCCO-2212/silver composite tape conductors, IEEE Trans. Appl. Supercond., vol. 7, pp. 2211-2214, 1997.
12. T. Hasegawa, Y. Hikichi, T. Koizumi, A. Imai, H. Kumakura, H. Kitaguchi, and K. Togano, Fabrication and properties of Bi2Sr2CaCu2Oy multilayer superconducting tapes and coils, IEEE Tram. Supercond., vol. 7, pp. 1703-1706,1997.
13. J. Kase, T. Morimoto, K. Togano, H. Kumakura, D.R. Dietderich, and H. Maeda, Preparation of the textured Bi-based oxide tapes by partial melting process, IEEE Trans. Magn., vol. 27. pp. 1254-1257, 1991.
14. H. Kumakura, K. Togano, D.R. Dietderich, H. Maeda, J. Kase, and T. Morimoto, Jc characteristics of textured Bi-based oxide tapes, IEEE Trans. Magn., vol. 27, pp. 1250-1253, 1991.
15. H. Kumakura, H. Kitaguchi, K. Togano, H. Maeda, J. Shimoyama, T. Morimoto, K. Nomura, and M. Seido, Fabrication of Bi2Sr2CaCu2Os Tapes and Coils, Adv. in Supercond., vol. IV, pp. 547-550, 1992.
16. H. Kumakura, H. Kitaguchi, K. Togano, and N. Sugiyama, Effect of high oxygen partial pressure heat treatment on the superconducting properties of Bi-2212/Ag tapes, J. Appl. Phys., vol. 80, pp. 5162-5168, 1996.
17. T. Hasegawa, Y. Hikichi, H. Kumakura, H. Kitaguchi, and K. Togano, Fabrication and superconducting properties of Bi-2212 multilayer tape prepared by continuous heat treatment, Jpn. J. Appl. Phys., vol. 34,pp.L1638-L1640,1995.
18. H. Miao, H. Kitaguchi, H. Kumakura, and K. Togano, Fabrication of high current carrying Bi-2212/Ag superconducting tapes by the annealing and cold rolling process, Cryogenics, vol. 38, pp. 257-259, 1998.
19. H. Miao, H. Kitaguchi, H. Kumakura, K. Togano, and T. Hasegawa, Effects of PAIR (pre-annealing and intermediate rolling) process on superconducting properties of Bi2Sr2CaCu2O./Ag multilayer tapes, Physica C, vol. 301, pp. 116-122, 1998.
20. H. Kitagiichi, H. Miao, H. Kumakura, K. Togano, T. Hasegawa, and T. Koizumi, Fabrication of Bi2Sr2CaCu2Ox/Ag tapes with Jc (4.2K, 10T) > 300,000 A/cm' by using PAIR process, 1CEC 17 Int. Cryogenic Engr. Conf. 199S (Bournemouth, U.K.), Ed. by D. Dew-Hughed, R. G. Scurlock, and J. H. P. Watson, Inst. of Phys. Publishing, Bristol, pp. 415-418, 1998.
21. W. Zhang and E. Hellstrom, The development of an aligned microstructure during melt processing of Bi,Sr2CaCu2O, (BSCCO-2212) doctor-bladed films, Physica C, vol. 218, pp. 141-152, 1993.