Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel. Part III: Lifetime prediction

International Journal of Fatigue

Volumn 30, Issue 10-11, 2008, Pages 1797-1812

  Fournier, B ^a,b   Sauzay, M ^a   Caes C ^a   Noblecourt, M ^a   Mottot, M ^a   Bougault, A ^a   Rabeau, V ^a   Man, J ^c   Gillia, O ^d   Lemoine, P ^d   Pineau, A ^b  

^a SRMA   (France)

^b CENTRE DES MATÉRIAUX   (France)

^c INSTITUTE OF PHYSICS OF MATERIALS   (Czech Republic)

^d CEA GRENOBLE   (France)

Author keywords

9 12 Cr martensitic steels; Creep fatigue; High temperature; Lifetime prediction; Modelling; Oxidation

Indexed keywords

CHROMIUM COMPOUNDS; HIGH TEMPERATURE EFFECTS; OXIDATION; STEEL;

9-12%CR MARTENSITIC STEELS; CREEP FATIGUE; LIFETIME PREDICTION;

FATIGUE OF MATERIALS;

EID: 44749085253     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2008.02.006     Document Type: Article

References (83)

1. Tomkins B. Fatigue crack propagation - an analysis. Philos Mag 18 (1968) 1041-1066
2. Fournier B., Sauzay M., Caës C., Noblecourt M., Bougault A., Rabeau V., et al. Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel. Part I: effect of tensile holding period on the fatigue lifetime. Int J Fatigue 30 (2008) 649-662
3. Fournier B., Sauzay M., Caës C., Noblecourt M., Bougault A., Rabeau V., et al. Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel. Part II: effect of compressive holding period on the fatigue lifetime. Int J Fatigue 30 (2008) 663-676
4. Fournier B, Sauzay M, Mottot M, Rabeau V, Bougault A, Pineau A. Fatigue crack initiation and propagation at high temperature in a softening martensitic steel. In: Proceedings of ECF16. Greece: Alexandroupolis; 2006.
5. Reuchet J., and Remy L. Fatigue oxidation interaction in a superalloy - application to life prediction in high temperature low cycle fatigue. Metall Trans A 14 (1983) 141-149
6. Murtaza G., and Akid R. Empirical corrosion fatigue life prediction models of a high strength steel. Eng Fract Mech 67 (2000) 461-474
7. Petit J., and Sarrazin-Baudoux C. An overview on the influence of the atmosphere environment on ultra-high-cycle fatigue and ultra-slow fatigue crack propagation. Int J Fatigue 28 (2006) 1471-1478
8. Rémy L., Alam A., Haddar N., Koster A., and Marchal N. Growth of small cracks and prediction of lifetime in high-temperature alloys. Mater Sci Eng A 468-470 (2007) 40-50
9. Sugiura T., Ishikawa A., Nakamura T., and Asada Y. Formulation of air environmental effect on creep-fatigue interaction. Nucl Eng Des 153 (1994) 87-95
10. Swindeman R.W., Santella M.L., Maziasz P.J., Roberts B.W., and Coleman K. Issues in replacing Cr-Mo steels and stainless steels with 9Cr-1Mo-V steel. Pres Ves Pip 81 (2004) 507-512
11. Sadananda K., and Shahinian P. Creep-fatigue crack growth. In: Gittus J. (Ed). Cavities and cracks in creep and fatigue (1981), Applied Science Publishers Ltd. 109-195
12. Pineau A. Mechanisms of creep-fatigue interactions. In: Advances in fatigue science and technology; 1989.
13. Suresh S. Fatigue of materials (1998), Cambridge University Press, UK
14. Bloom E.E., Zinkle S.J., and Wiffen F.W. Materials to deliver the promise of fusion power - progress and challenges. J Nucl Mater 329-333 (2004) 12-19
15. Benoit D, Lieurade HP, Namdar-Irani R, Tixier R. Oxydation des surfaces de rupture par fatigue des aciers aux basses vitesses de fissuration Mémoires et Etudes Scientifiques Revue de Métallurgie; 1981.
16. James L.A. Some questions regarding the interaction of creep and fatigue. J Eng Mater Technol (1976) 235
17. Lacombe P. Influence de l'environnement et de la structure métallurgique sur le comportement au fluage des métaux et de leurs alliages. In: Proceedings of the 23ème colloque de métallurgie - fluage, fatigue-fluage, Action de l'environnement. Masson; 1981.
18. Wood DS. Effects of sodium on the creep behaviour of some structural steels. In: Proceedings of the 23ème colloque de métallurgie - fluage, fatigue-fluage, Action de l'environnement. Masson; 1981.
19. Wu X.Q., and Katada Y. Influence of cyclic strain rate on environmentally assisted cracking behavior of pressure vessel steel in high-temperature water. Mater Sci Eng A 379 (2004) 58-71
20. Tanaka K., and Mura T. A dislocation model for fatigue crack initiation. J Appl Mech 48 (1981) 97-103
21. Mura T. A theory of fatigue crack initiation. Mater Sci Eng A 176 (1994) 61-70
22. Fournier B., Sauzay M., Caës C., and Mottot M. Analysis of the hysteresis loops of a martensitic steel. Part I: study of the influence of strain amplitude and temperature under pure fatigue loadings using an enhanced stress partitioning method. Mater Sci Eng A 437 (2006) 183-196
23. Verleene A., Vogt J.-B., Serre I., and Legris A. Low cycle fatigue behaviour of T91 martensitic steel at 300 °C in air and in liquid lead bismuth eutectic. Int J Fatigue 28 (2006) 843-851
24. Earthman J.C., Eggeler G., and Ilschner B. Deformation and damage processes in a 12%Cr-Mo-V steel under high temperature low cycle fatigue conditions in air and vacuum. Mater Sci Eng A 110 (1989) 103-114
25. Fournier B, Sauzay M, Caës C, Noblecourt M, Mottot M, Bougault A, et al. Duree de vie en fatigue-fluage a haute temperature des aciers martensitiques a 9%Cr: interactions fatigue/fluage/oxydation. In: Actes de congrés du colloque MECAMAT2007. Aussois, France; 2007.
26. Brnckner-Foit A., and Huang X. Numerical simulation of micro-crack initiation of martensitic steel under fatigue-loading. Int J Fatigue 28 (2006) 963-971
27. Ogata T., and Yamamoto M. High-temperature fatigue crack propagation property of Mod.9Cr-1Mo steel under vacuum and air conditions. JSME Int J 40 (1997) 283-289
28. Skelton R.P. Cyclic crack growth properties of service-exposed ferritic steels for use in thermal fatigue assessments. Mater High Temp 22 (2005) 129-146
29. Nakamura H., Murali K., Minakawa K., and McEvily A.J. Fatigue crack growth in ferritic steels as influenced by elevated temperature and environment. Microstruct Mech Behav Mater 1 (1985) 43-57
30. King J.E., and Cotterill P.J. Role of oxides in fatigue crack propagation. Mater Sci Technol 6 (1990) 19-31
31. Okamura H., Ohtani R., Saito K., Kimura K., Ishii R., Fujiyama K., et al. Basic investigation for life assessment technology of modified 9Cr-1Mo steel. Nucl Eng Des 193 (1999) 243-254
32. Ebi G., and McEvily A.J. Effect of processing on the high temperature low cycle fatigue properties of modified 9Cr-1Mo ferritic steel. Fatigue Eng Mater Struct 7 (1984) 299-314
33. Kim S., Kohyama A., and Yoon H. Fatigue crack growth behavior and microstructure of reduced activation ferritic/martensitic steel (JLF-1). Fusion Eng Des 81 (2006) 1105-1110
34. Yoon H., Lee S., Min B., Kim S., Katoh Y., and Kohyama A. Fatigue life and fatigue crack propagation behavior of JLF-1 steel. Fusion Eng Des 61-62 (2002) 677-682
35. Aktaa J., and Lerch M. Near-threshold fatigue crack behaviour in EUROFER 97 at different temperatures. J Nucl Mater 333 (2006) 101-108
36. Chaswal V., Sasikala G., Ray S., Mannan S., and Raj B. Fatigue crack growth mechanism in aged 9Cr-1Mo steel: threshold and Paris regime. Mater Sci Eng A 395 (2005) 251-264
37. Filippini E. The martensitic steels 9Cr-1Mo modified types as possible candidate alloys for high temperature plants. ENEA, Contract RA1 CT/94/0239-IT; 1996.
38. Härkegard G., Denk J., and Stärk K. Growth of naturally initiated fatigue cracks in ferritic gas turbine rotor steels. Int J Fatigue 27 (2005) 715-726
39. Maile K., klenk A., Granacher J., Schellenberg G., and Tramer M. Creep and creep-fatigue crack behavior of 1Cr- and 9Cr-steels. Key Eng Mater 171-174 (2000) 85-98
40. Alexandre F., Deyber S., and Pineau A. Modelling of the optimum grain size on the low cycle fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites. Scripta Mater 50 (2004) 25-30
41. Taylor G.I. Plastic strains in metals. J Inst Met 62 (1938) 307-324
42. Lin M., Fine M., and Mura T. Fatigue crack initiation on slip bands: theory and experiment. Acta Metall 34 (1986) 619-628
43. Hoshide T., and Socie D. Crack nucleation and growth modeling in biaxial fatigue. Eng Fract Mech 29 (1988) 287-299
44. Déprés C., Robertson C., and Fivel M. Crack initiation in fatigue: experiments and three-dimensional dislocation simulations. Mater Sci Eng A 387-389 (2004) 288-291
45. Déprés C. Modélisation physique des stades précurseurs de l'endommagement en fatigue dans l'acier inoxydable austénitique 316L. PhD thesis, INPG; 2004.
46. Kim H.J., Lee C.S., Park S.H., and Shin D.H. Quantitative analysis on low cycle fatigue damage: a microstructural model for the prediction of fatigue life. Mater Sci Eng A 379 (2004) 210-217
47. Salapete R, Barlas B, Massinon D, Morin G, Cailletaud G, Pineau A. Modelling of fatigue damage in aluminium cylinder head. In: Proceedings of the ECF16 conference, fracture of nano and engineering materials and structures. Greece: Alexandroupolis; 2006.
48. Alexandre F. Aspects probabilistes et microstructuraux de l'amortage des fissures de fatigue dans l'alliage INCO 718. PhD thesis, Ecole des Mines de Paris; 2004.
49. Levaillant C. Approche métallographique de l'endommagement d'aciers inoxydables austénitiques sollicités en fatigue plastique ou en fluage: description et interprétation physique des interactions fatigue-fluage-oxydation. PhD thesis, Ecole des Mines de Paris; 1984.
50. Obrtlik K., Polak J., Hajek M., and Vasek A. Short fatigue crack behaviour in 316L stainless steel. Int J Fatigue 179 (1997) 471-475
51. Bathias C, Baïlon J-P. La fatigue des matériaux et des structures. Hermés, Paris; 1997.
52. Levy N., Marcal P., Ostergren W., and Rice J. Small scale yielding near a crack in plane strain: a finite element analysis. Int J Fract 7 (1971) 143-156
53. Bäumel A., and Seeger T. Materials data for cyclic loading - supplement 1 (1990), Elsevier, Amsterdam
54. Argence D, Pineau A. In: Structural materials, The Donald MCLean Symposium, The Institute of Materials; 1995. p. 229-57.
55. Fedelich B. A stochastic theory for the problem of multiple surface crack coalescence. Int J Fract 91 (1998) 23-45
56. Fedelich B, Frenz H, Osterle W, Stark K. Experimental and numerical evaluation of fatigue crack initiation and propagation for in 738lc at 850 °C. In: Proceedings of ECF11 - mechanisms and mechanics of damage and failure; 1996.
57. Pineau A. Mechanics of random and multiscale microstructure. The randomness of fatigue and fracture behaviour in metallic materials and mechanical structures (2002), Springer, Wien NewYork [Chapter]
58. Kachanov M. Elastic solids with many cracks and related problems. Adv Appl Mech 30 (1994)
59. Kachanov M. On the problems of crack interactions and crack coalescence. Int J Fract 120 (2003) 537-543
60. Nagesha A., Valsan M., Kannan R., Bhanu Sankara Rao K., and Mannan S.L. Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr-1Mo ferritic steel. Int J Fatigue 24 (2002) 1285-1293
61. Gieseke BG, Brinkman CR, Maziasz PJ. The influence of thermal aging on the microstructure and fatigue properties of modified 9Cr-1Mo steel. In: Microstructures and mechanical properties of aging material, TMS The Minerals, Metals & Materials Society; 1993.
62. Kim S., and Weertman J.R. Investigation of microstructural changes in a ferritic steel caused by high temperature fatigue. Metall Trans A 19A (1988) 999-1007
63. Aoto K., Komine R., Ueno F., Kawasaki H., and Wada Y. Creep-fatigue evaluation of normalized and tempered modified 9Cr-1Mo. Nucl Eng Des 153 (1994) 97-110
64. Kunz L., and Lukas P. Cyclic stress-strain behavior of 9Cr-1Mo steel at positive mean stress. Mater Sci Eng A 319-321 (2001) 555-558
65. Armas A.F., Petersen C., Schmitt R., Avalos M., and Alvarez-Armas I. Mechanical and microstructural behaviour of isothermally and thermally fatigued ferritic/martensitic steels. J Nucl Mater 307-311 (2002) 509-513
66. Yaguchi M., and Takahashi Y. Ratchetting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr-1Mo steel. Int J Plasticity 21 (2005) 43-65
67. Kruml T., and Polak J. Fatigue softening of X10CrAl124 ferritic steel. Mater Sci Eng A 319-321 (2001) 564-568
68. Sauzay M., Brillet H., Monnet I., Mottot M., Barcelo F., Fournier B., et al. Cyclically induced softening due to low-angle boundary annihilation in a martensitic steel. Mater Sci Eng A 400-401 (2005) 241-244
69. Fournier B., Sauzay M., Mottot M., Brillet H., Monnet I., and Pineau A. Experimentally based modelling of cyclically induced softening in a martensitic steel at high temperature. Creep and fracture in high temperature components - design and life assessment issues (2005), Destech Publications Inc., Pennsylvania, USA
70. Fournier B., Sauzay M., Caës C., Noblecourt M., Mottot M., and Pineau A. Analysis of the hysteresis loops of a martensitic steel. Part II: study of the influence of creep and stress relaxation holding times on cyclic behaviour. Mater Sci Eng A 437 (2006) 197-211
71. Filacchioni G, Casagrande E, De Angelis U, De Santis G, Ferrara D, Gennaro G, Isothermal and thermal fatigue behaviour of Eurofer 97 base metal. Final Report of sub task TW2-TTMS-002, EFDA; 2006.
72. Koo G., and Lee J. Investigation of ratcheting characteristics of modified 9Cr-1Mo steel by using the Chaboche constitutive model. Int J Pres Ves Pip 84 (2007) 284-292
73. Gaillet L., Benmedakhne S., Laksimi A., and Moulin G. Nickel high temperature oxidation under creep loading using acoustic emission monitoring. J Mater Sci 38 (2003) 1479-1484
74. Fournier B. Fatigue-fluage des aciers martensitiques à 9-12%Cr: comportement et endommagement. PhD thesis, Ecole des Mines de Paris; 2007.
75. Armas A.F., Avalos M., Alvarez-Armas I., Petersen C., and Schmitt R. Dynamic strain ageing evidences during low cycle fatigue in ferritic-martensitic stainless-steels. J Nucl Mater 258-263 (1998) 1204-1208
76. Mannan S.L., and Valsan M. High-temperature low cycle fatigue, creep-fatigue and thermomechanical fatigue of steels and their welds. Int J Mech Sci 48 (2006) 160-175
77. Choudhary B.K., Bhanu Sankara Rao K., Mannan S., and Kashyap B. Influence of prior thermal ageing on tensile deformation and fracture of forged thick section 9Cr-1Mo ferritic steel. J Nucl Mater 273 (1999) 315-325
78. Laird C, Duquette J. In: Corrosion fatigue - chemistry, mechanisms and microstructure. NACE-2; 1971. p. 88.
79. Thompson N., Wedsworth N., and Louat N. Philos Mag 1 (1956) 113
80. Shen H., Podlasek S., and Kramer I. Effect of vacuum on the fatigue life of aluminium. Acta Metall 14 (1966) 341-346
81. Man J., Petrenec M., Obrtlik K., and Polak J. AFM and TEM study of cyclic slip localization in fatigued ferritic X10CrAl24 stainless steel. Acta Mater 52 (2004) 5551-5561
82. Cretegny L., and Saxena A. Evolution of surface deformation during fatigue of ph 13-8 mo stainless steel using atomic force microscopy. Fatigue Fract Eng Mater Struct 25 (2002) 305-314
83. Brown M., and Miller K. A theory for fatigue failure under multiaxial stress-strain conditions. Proc Inst Mech Eng 187 (1973) 745-755