Growth of small cracks and prediction of lifetime in high-temperature alloys

Materials Science and Engineering: A

Volumn 468-470, Issue SPEC. ISS., 2007, Pages 40-50

  Rémy, Luc ^a   Alam, Adil ^b   Haddar, Nader ^b   Köster, Alain ^a   Marchal, Nicolas ^b  

^a CENTRE DES MATÉRIAUX   (France)

^b NONE

Author keywords

Creep oxidation fatigue interaction; Damage model; Fatigue crack growth; Life prediction; Short cracks; Stainless steel; Superalloys

Indexed keywords

EMBRITTLEMENT; FATIGUE CRACK PROPAGATION; FINITE ELEMENT METHOD; LIFE CYCLE; OXIDATION; POWDER METALLURGY; STAINLESS STEEL; THERMAL FATIGUE;

COFFIN-MANSON CURVES; MODIFIED TOMKINS EQUATION; PROBABILISTIC LIFE PREDICTION MODEL;

SUPERALLOYS;

EMBRITTLEMENT; FATIGUE CRACK PROPAGATION; FINITE ELEMENT METHOD; LIFE CYCLE; OXIDATION; POWDER METALLURGY; STAINLESS STEEL; SUPERALLOYS; THERMAL FATIGUE;

EID: 34548190310     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2006.08.133     Document Type: Article

References (52)

1. Boettner R.C., Laird C., and McEvily A.J. Trans. AIME 233 (1965) 379
2. McEvily A.J., and Boettner R.C. Acta Metall. 11 (1963) 725
3. Minakawa K., Newman J.C., and McEvily A.J. Fatigue Eng. Mater. Struct. 6 (1983) 359
4. Teranishi H., and McEvily A.J. Metall. Trans. A 10 (1979) 1806
5. Hyzak J.M., and Bernstein I.M. Metall. Trans. A 13 (1982) 33-45
6. J.C. Lautridou, J.Y. Guédou, Y. Honnorat, in: E. Bachelet, et al. (Eds.), High Temperature Materials for Power Engineering, 1990, p. 1163.
7. J. Grison, Fatigue crack initiation at inclusions in a powder metallurgy superalloy (in French), Thesis, Ecole des Mines de Paris, 1994.
8. Murakami Y., and Endo M. Fatigue 16 (1994) 163
9. Soniak F., and Rémy L. In: Miller K.J., and de Los Rios E.R. (Eds). The Behavior of Short Fatigue Cracks, EGF Publication 1 (1986), Mechanical Engineering Publications, London 133
10. Soniak F., and Rémy L. In: Kitagawa H., and Tanaka T. (Eds). Fatigue 90 vol. 3 (1990), Materials and Component Engineering Publications, Edgbaston, UK 1583
11. Grison J., and Rémy L. Eng. Fract. Mech. 57 (1997) 41
12. Beevers C.J., Bell K., Karlson R.L., and Starke E.A. Eng. Fract. Mech. 29 (1984) 93
13. Brückner-Foit A., Jäckels H., and Quadfasel U. Fatigue Fract. Eng. Mater. Struct. 16 (1993) 891
14. de Bussac A. Fatigue Fract. Eng. Mater. Struct. 17 (1994) 1319
15. J.C. Lautridou, A. Debussac, F. Soniak, in: J.P. Bailon, J.I. Dickson (Eds.), Fatigue 93, vol. 1, 1993, p. 285.
16. Wareing J., and Vaughan H.G. Met. Sci. 11 (1977) 439
17. Chalant G., and Rémy L. Acta Metall. 28 (1980) 75
18. Tomkins B. Philos. Magaz. 18 (1968) 1041
19. Skelton R.P. In: Solomon H.D., Halford G.R., Kaisand L.R., and Leis B.N. (Eds). Low-Cycle Fatigue, ASTM STP 942 (1988), American Society for Testing and Materials 209
20. N.E. Dowling, J.A. Begley, Fatigue crack growth during gross plasticity and the J-integral, Mechanics of Crack Growth, ASTM STP 590, 1976, p. 82.
21. Shih C.F., and Hutchinson J.W. J. Eng. Mater. Technol. 98 (1976) 289
22. Goldman N.L., and Hutchinson J.W. Int. J. Solids Struct. 11 (1975) 575
23. Taira S., Ohtani R., and Komatsu T. J. Eng. Mater. Technol., Trans. ASME 101 (1979) 162
24. Ohtani R., and Kitamura T. In: Carpinteri A. (Ed). Handbook of Fatigue Crack Propagation in Metallic Structures (1994), Elsevier Science 1347
25. Okazaki M., and Koizumi T. Metall. Trans. A 14 (1983) 1641
26. N. Haddar, L. Rémy, A. Koster, M. Akamatsu, in: A.F. Blom, Fatigue 2002, Proceedings of the 8th International Fatigue Congress, vol. 3, Stockholm, Sweden, June 3-7, 2002, EMAS, Cradley Heath, UK, 2002, p. 1665.
27. N. Haddar, Thermal fatigue of an austenitic steel 304L: simulation of crack initiation and short crack growth under isothermal and non-isothermal fatigue (in French), Thesis, Ecole des Mines, Paris, 2003.
28. Schmitt W., Mohrman R., Riedel H., Dietsche A., and Fischersworring-Bunk A. In: Blom A.F. (Ed). Fatigue 2002, Proceeding of the 8th International Fatigue Congress, vol. 2. June 3-7, 2002, Stockholm (2002), EMAS, Cradley Heath 781
29. Murakami Y. In: Solomon H.D., Halford G.R., Kaisand L.R., and Leis B.N. (Eds). Low Cycle Fatigue, ASTM STP 942 (1988), American Society for Testing and Materials, Philadelphia 1048
30. Coffin Jr. L.F. Fatigue at Elevated Temperature, ASTM STP 520 (1973), American Society for Testing, Materials, Philadelphia p. 5
31. Manson S.S. Fatigue at Elevated Temperatures, ASTM STP 520 (1973), American Society for Testing and Materials, Philadelphia p. 744
32. Taira S. Fatigue at Elevated Temperature, ASTM STP 520 (1973), American Society for Testing and Materials, Philadelphia p. 80
33. Ostergren W.J. J. Testing Eval. 14 (1976) 327
34. Spera D.A. The Calculations of Elevated Temperature Cyclic Life Considering Low Cycle Fatigue and Creep (1969), NASA-TN D-5317 National Aeronautics and Space Administration, Washington, DC
35. Franklin C.J. In: Coutsouradis D., et al. (Ed). High Temperature Alloys for Gas Turbines (1978), Applied Science Pub., London 513
36. Chaboche J.L. In: Amzallag C., Leis B.N., and Rabbe P. (Eds). Low Cycle Fatigue and Life Predictions, ASTM STP 770 (1982), American Society for Testing and Materials, Philadelphia 81
37. Rémy L., and Skelton P. In: Larsson L.H. (Ed). High Temperature Structural Design, ESIS 12 (1992), Mechanical Engineering Publications, London 283
38. Rémy L. In: Milne I., Ritchie R.O., and Karihaloo B. (Eds). Comprehensive Structural Integrity. In: Saxena A. (Ed). Creep and High Temperature Failure vol. 5 (2003), Elsevier, Amsterdam 113
39. Mc Clintock F.A. In: Drucker D.C., and Gilman J.J. (Eds). Fracture of Solids (1963), Interscience, New York 65
40. Méric L., Poubanne P., and Cailletaud G. J. Eng. Mater. Technol. 113 (1991) 162
41. A. Koster, A. Alam, L. Rémy, in: L. Rémy, J. Petit (Eds.), Temperature-Fatigue Interaction, Ninth International Spring Meeting, ESIS Publication 29, May 29-31, 2001, Elsevier, Paris, 2002, p. 203.
42. M. Probst-Hein, G. Eggeler, Predictive Microstructural Assessment and Micromechanical Modeling of Deformation and Damage accumulation in Single Crystal Gas Turbine Blading (MICROMOD-SX), Final report for the Brite-EuRam III project, Ruhr-Universität Bochum (IM-RUB), Germany, 2001.
43. Rabotnov Y.N. Creep Problems in Structural Members (1969), North-Holland, Amsterdam
44. L. Rémy, H. Bernard, L. Malpertu, F. Rezai-Aria, in: S. Sehitoglu (Ed.), Thermomechanical Fatigue Behavior of Materials, ASTM STP 1186, 1993, p. 3.
45. Rezaï-Aria F., and Rémy L. Eng. Fract. Mech. 34 (1989) 283
46. Chateau E., and Rémy L. EUROMAT 2001, Proceedings of the 7th European Conference. June 10-14, Rimini, Italy (2001)
47. Alam A.M., and Rémy L. Proceedings of the 11th International Conference on Fracture. March 20-25, Turin, Italy (2005)
48. Pineau A. In: François D., et al. (Ed). Advances in Fracture Research vol. 2 (1981), Pergamon Press, Oxford 553
49. Marchal N., Flouriot S., Forest S., and Remy L. Comput. Mater. Sci. 7 (2006) 42
50. Boubidi P., and Sievert R. In: Biallas G., et al. (Ed). High-Temperature Fatigue-CAMP 2002 (2002), University of Paderborn, Germany 167
51. Marchal N., Rémy L., Forest S., and Duvinage S. Fatigue 2006, Proceedings of the 9th International Fatigue Congress. May 14-19, Georgia Tech, Elsevier, CD-Rom, Atlanta (2006) 10
52. Marchal N., Forest S., Rémy L., and Duvinage S. In: Besson J., Moinereau D., and Steglich D. (Eds). Euromech-Mecamat 2006, Proceedings of the 9th European Mechanics of Materials Conference, Local Approach to Fracture (2006) 353